Database Users

Wizbackup ??????

good day to you all
i want to backup my kjam and i downloaded the wizbackup and there is somthing worng:
i am connecting my kjam to the computer with the windows mobile device center ( the new program that come's with vista) and it says "connected" and then run the wizbackup :
1.the first step it says to choose the option i want , i choose 1(backup rom(auto cid unlock)).
2.it says please connect your wizerd to the computer make sure activsync is connected and press enter....
3.now i wait untill i see another menu (the screen is showing some 4 colers like red green blue and in the res section it says IPL 2.16 nad RUU and SPL 2.16 and in button it says USB)...and in the menu it says "when mtty will start choose usb and press enter......nothing happend so i press enter....
and then i see some pop up that named "open port setting" so i serch for usb but there is no usb there only com1 and com2.....??????? so after a long story someone can help me?

I am in the same exact boat that you're in and I really hope that someone answers your post. In the mean time I will continue to search for an answer and if I find it, I'll return to this thread and post it for you. If you should happen to find the answer, could you please do the same?
Happy searching.

How to use the MTTY.exe ??

After many tries I think i´m to stupid th use this little program.
I´ve connected my Vario II in bootloader mode ,Activesync is disabled.USB is selected.All other checkboxes are default.
I´ve got the "USB" prompt.
If I use the "rtask b" command to enter the GSM AT command interface, I can´t make any inputs in MTTY.I can´t even go back with "returoR" to normal bootloader.
If I disconnect the USB cable the Hermes didn´t change from USB to serial.
What did I wrong?
It´s Hermes 300; IPL-1.01; SPL-1.04
Thanks for your replies
scorpio16v

When you type 'rtask b' and go to GSM bootloader you have no "local echo", that means what you type is not printed on the screen.
To enable local echo you have to type "ate 1" and press enter, also it is good to type "atv 1" for better responses.
To exit, you have to type "retuoR", but sometimes 3 times before it exits.

pof said:
To exit, you have to type "retuoR", but sometimes 3 times before it exits.
Click to expand...
Click to collapse
Thanks pof
The word "returoR" semms to be a mistake in the Wiki.

thanks, fixed

not sure why .. all i got is "cmd" instead of "usb" ... ?

when i try to conect mtty with my hermes, it open a window when usb is selected and all other radio default..it shows CLIENT CLEINT
and doesnt allow to enter any command..i can copy paste but command has no effect..what is wrong..i have disabled usb connection from active sync

Four colors screen after radio 1.58.25.14 upgrade

Hello,
After I tried to upgrade my Polaris Radio Rom to version 1.58.25.14, instalation stoped at 99%.
Now when I just turn on my device without USB cable connected I get always the Four colors screen. ( POLA100 ; SPL-1.25.0000; CPLD-2)
I already tried to upgrade many times the radio rom, the full rom, according with the described on 'How to guide: HardSPL ' but when I try to upgrade the info about Image version at the 'Step 4' doesn't appear, and at this step the device already presents the evolution bar stopped at 0% and doesn't pass this...
After a while I get always the same message 'ERROR [262]: UPDATE ERROR'.
What can I do to RESOLVE THIS PROBLEM ?
PLEASE HELP ME !?
Thank you in advance !

i think u shuld wait, coz it takes somtime on 99%

sorry ... you havent read all threads about radio rom flashing carefully!
download the programm mtty and use the command "boot" to start you OS again. then you must flash hardspl. after that ... you can flash a radio rom.
your device isnt bricked or damage!

You can try this....
1. Stop ActiveSync
2. Open Task Manager (press Ctrl + Alt + Delete) on your PC and
stop these two processes rapimgr.exe and wcescomm.exe
3. Plug in your device via USB. Your computer should be asking install a driver. Install and continue.
4. Now Run mtty and choose USB in 'PORT'
4. type "set 16 0" without the quotes to tell bootloader to boot the OS after reset.
5. type "task 8" to get your device formatted.
6. Now unplug your device and manually reset it.
Should work... I used it a while back with a Hermes and I just guided someone else with the same problem as you through it.... and it worked.

I can confirm that the method indicated by Christonge works fine
PQillu,

Thanks mates !
It worked, I finally have my Polaris alive !

disable under Vista
I would like to disable the Center of synchronisation under Vista and I have no idea how to do.

epsimax said:
I would like to disable the Center of synchronisation under Vista and I have no idea how to do.
Click to expand...
Click to collapse
Welcome to the forum, mate, but please post specific questions
in specific threads meant for that (not being offensive 2U though)
In your case I would suggest THIS ONE
Cheers, Olioaglio

christonge said:
You can try this....
1. Stop ActiveSync
2. Open Task Manager (press Ctrl + Alt + Delete) on your PC and
stop these two processes rapimgr.exe and wcescomm.exe
3. Plug in your device via USB. Your computer should be asking install a driver. Install and continue.
4. Now Run mtty and choose USB in 'PORT'
4. type "set 16 0" without the quotes to tell bootloader to boot the OS after reset.
5. type "task 8" to get your device formatted.
6. Now unplug your device and manually reset it.
Should work... I used it a while back with a Hermes and I just guided someone else with the same problem as you through it.... and it worked.
Click to expand...
Click to collapse
Nice one, mate!!!

christonge said:
You can try this....
1. Stop ActiveSync
2. Open Task Manager (press Ctrl + Alt + Delete) on your PC and
stop these two processes rapimgr.exe and wcescomm.exe
3. Plug in your device via USB. Your computer should be asking install a driver. Install and continue.
4. Now Run mtty and choose USB in 'PORT'
4. type "set 16 0" without the quotes to tell bootloader to boot the OS after reset.
5. type "task 8" to get your device formatted.
6. Now unplug your device and manually reset it.
Should work... I used it a while back with a Hermes and I just guided someone else with the same problem as you through it.... and it worked.
Click to expand...
Click to collapse
how can i get mtty and how its work?

christonge said:
You can try this....
Very very cool!!!
I have my Polaris back now !!!
Tanks !!!
Click to expand...
Click to collapse

>> type "task 8"
this step is really optional. no need to re-format if you stucked in bootloader mode usually. device will boot after "set 16 0". this command sets device to use normal mode instead of bootloader mode upon reset.
ommiting the task 8 will save you from reinstalling all you programms again and form other data losses associated with hard reset.

Upgrade without usable Mail button

Hello
I want to upgrade my MDA3 from WM2003se to WM06.
After i have read the upgrade artikel, i have seen, that im must change this
"Enable KITL” must be NO, “Clean Registry Hive” must be YES, “Format Storage” must be YES"
And here is my problem, my 4 buttons (Mail, Explorer, Windows, ok) in front of the MDA are Defect. So i can´t confirm the Options.
Are ther other ways to do this.
MFG Kleinepelle
PS: I know my english is very bad

Logically if you map the mail button to any of the top buttons, that should work as BA still keeps the entire software prior to pressing mail button. However an expert should confirm. Dont take risk.

Upgrade without usable mail button
kleinepelle said:
Hello
I want to upgrade my MDA3 from WM2003se to WM06.
After i have read the upgrade artikel, i have seen, that im must change this
"Enable KITL” must be NO, “Clean Registry Hive” must be YES, “Format Storage” must be YES"
And here is my problem, my 4 buttons (Mail, Explorer, Windows, ok) in front of the MDA are Defect. So i can´t confirm the Options.
Are ther other ways to do this.
MFG Kleinepelle
PS: I know my english is very bad
Click to expand...
Click to collapse
Hi there ... I have the same kind of problem with my O2 XDA IIs Blueangel. The mail button along with the other 3 (home,ie,ok) are not working or not responding anytime.I was not able to upgrade my rom and format the registry hive
But then i found a much simpler way to do it..
Try the following to format your rom,clear registry hive and upgrade to a new rom-all this even with the mail button not working.
You will need the program MTTY(Attached with this post).
1) Kill activesync processes: Ctrl+Shift+Esc in Windows to bring up Task Manager. Kill wcescomm.exe and WCESMgr.exe (by selecting the task on the processes tab, and clicking the End Process button below)
2) Phone needs to be POWER + Record + Pen Reset and on Serial/USB screen. COnnect it to the PC, and it should show USB, with the backlight remaining off.
3a) Run mtty1.42.exe
b) Select USB from first list (where COM1 is displayed. Don't press USB button). If USB (or a list item containing USB) isn't in the list, then you have't connected to the PC properly.
(Leave default parameters: 8 bits / Flow Control NONE / Stop bits 1 / Parity None / Local Echo No)
c) Click OK
3) Run following commands:
[press enter first to get USB> prompt]
USB>
5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
USB>set 14 0
HTCST ÚÈHTCEUSB>
6. type "task 28" to get your device formatted
USB>task 28
DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=2BA0000
All:dwSize=3C20000
USB>
7. type "task 0" to ask your device reboot
USB>task 0
USB>
8) Exit the program, then re-hard-reset (POWER + Record + Pen Reset), leaving on USB screen in order to run ROM Flasher
9)Now be back to the Usb/Serial screen and run your favourite ROM upgrade-A clean installation
Please let me know if this worked for you too. I believe this was my great geeky work i did with my BA. Was so frustrated when the buttons were not
working.
P.S: This is not my own work. I got the Mtty app from this same forum and the steps too. I am terrible sorry if i have repeated a post or done something i should not

Thank you very much.
It runs very good.
MFG Kleinepelle

Great advice! this should be placed in the wiki as well

Thanks to you and to all others <ou mwntioned for this help. Dtipex

thanks, it works!
thanks, it works!!
crabiorc said:
Hi there ... I have the same kind of problem with my O2 XDA IIs Blueangel. The mail button along with the other 3 (home,ie,ok) are not working or not responding anytime.I was not able to upgrade my rom and format the registry hive
But then i found a much simpler way to do it..
Try the following to format your rom,clear registry hive and upgrade to a new rom-all this even with the mail button not working.
You will need the program MTTY(Attached with this post).
1) Kill activesync processes: Ctrl+Shift+Esc in Windows to bring up Task Manager. Kill wcescomm.exe and WCESMgr.exe (by selecting the task on the processes tab, and clicking the End Process button below)
2) Phone needs to be POWER + Record + Pen Reset and on Serial/USB screen. COnnect it to the PC, and it should show USB, with the backlight remaining off.
3a) Run mtty1.42.exe
b) Select USB from first list (where COM1 is displayed. Don't press USB button). If USB (or a list item containing USB) isn't in the list, then you have't connected to the PC properly.
(Leave default parameters: 8 bits / Flow Control NONE / Stop bits 1 / Parity None / Local Echo No)
c) Click OK
3) Run following commands:
[press enter first to get USB> prompt]
USB>
5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
USB>set 14 0
HTCST ÚÈHTCEUSB>
6. type "task 28" to get your device formatted
USB>task 28
DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=2BA0000
All:dwSize=3C20000
USB>
7. type "task 0" to ask your device reboot
USB>task 0
USB>
8) Exit the program, then re-hard-reset (POWER + Record + Pen Reset), leaving on USB screen in order to run ROM Flasher
9)Now be back to the Usb/Serial screen and run your favourite ROM upgrade-A clean installation
Please let me know if this worked for you too. I believe this was my great geeky work i did with my BA. Was so frustrated when the buttons were not
working.
P.S: This is not my own work. I got the Mtty app from this same forum and the steps too. I am terrible sorry if i have repeated a post or done something i should not
Click to expand...
Click to collapse

very well explained . good job

Xperia ROM and Guides

New Generic RTL Xperia ROM images are officially released;
Code:
[I]ROM images[/I]
[B]Customized DE[/B]
http://rapidshare.com/files/155680913/APP_SW_X1i_GENERIC_DE_1213-6439_CDF1215-3303_KOV_R1AA017.image.html
[B]Generic FR[/B]
http://rapidshare.com/files/155700645/APP_SW_X1i_GENERIC_FR_1213-6441_CDF1215-3307_KOV_R1AA017.image.html
[B]Generic IT[/B]
http://rapidshare.com/files/155252393/APP_SW_X1i_GENERIC_IT_1213-6444_CDF1215-3309_KOV_R1AA017.zip.html
[B]Generic SE[/B]
http://rapidshare.com/files/155685806/APP_SW_X1i_GENERIC_SE_1213-2274_CDF1215-3315_KOV_R1AA017.image.html
[B]Customized UK[/B]
http://rapidshare.com/files/154889093/APP_SW_X1i_GENERIC_UK_1213-6450_CDF1215-1832_KOV_R1AA017.zip.html
[B]Customized T-Mobile NL[/B]
http://rapidshare.com/files/155690891/APP_SW_X1i_TMO_NL_1213-2293_CDF1216-0475_KOV_R1AA020.image.html
[B]O2 DE[/B]
http://rapidshare.com/files/155769609/APP_SW_X1i_O2_DE_1213-2272_CDF1215-1634_KOV_R1AA017.image.html
[I]Instructions / Movie / Trouble Shooting[/I]
[B]Working Instructions Guide (Mechanical level) for X1i/X1a[/B]
http://rapidshare.com/files/155696508/Guide_Working_Instructions_Mechanical_X1i.pdf.html
[B]Working Instructions Guide (Mechanical level) for X1i/X1a[/B]
http://rapidshare.com/files/155696939/Guide_Repair_Movies_Mechanical_X1i.pdf.html
[B]Trouble Shooting Guide (Mechanical level) for X1i/X1a[/B]
http://rapidshare.com/files/155697184/Guide_Trouble_Shooting_Mechanical_X1i.zip.html
Code:
[B]How to enter bootloader mode on your Xperia:[/B]
0. Make sure your phone battery is fully charged.
1. Turn off your phone.
2. Remove and reinsert the phone battery.
3. Press and hold first the volume down button on the phone and then the phone power button.
4. Continue holding the two buttons (volume down + power button) down until the phone display turns on and displays colored stripes.
5. Release the buttons.
6. Attach the USB-mini cable to the phone and the PC.
7. Take a cold beer :).
[I]Delay a few minutes, or alternativity take a short nap[/I]
8. Follow included instructions.
9. Read again.
...
10. Start playing with your device
I have also attached some technical guides together with mechanical/electrical repair manuals which includes assembly and disassembly hints, I really do hope the community finds them useful. If you are missing something, don't hesitate to PM me or you can mention in this thread what you really are looking for.
It is required that you've got a security unlocked phone (SuperCID with HardSPL) for being able to use the ROM images linked above!
Regards

thanks a lot

arash_ ! Thanx

awesome, thx for sharing with us

I tried UK IT SE versions, they all stoped at either 10% or 11%.
Now I cant use my phone anymore, it shows a four color screen(red green blue and white),
and says that
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-707
Upgrade ROM code error
Please try again
Serial
--
I tried to use RUU to recover the process, but it didn't work, always stops at 10%
I am not an engineer, don't know much about it, could anymore one just tell me how to make my phone work again, I just want the SE system back, I am done with flashing the ROM. thanks

ffffdddd said:
I tried UK IT SE versions, they all stoped at either 10% or 11%.
Now I cant use my phone anymore, it shows a four color screen(red green blue and white),
and says that
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-707
Upgrade ROM code error
Please try again
Serial
--
I tried to use RUU to recover the process, but it didn't work, always stops at 10%
I am not an engineer, don't know much about it, could anymore one just tell me how to make my phone work again, I just want the SE system back, I am done with flashing the ROM. thanks
Click to expand...
Click to collapse
the same problem here

any ideas how to unlock that cid?

Its a happy day again !!! Yipiii
1. Download mtty.exe
2. Disable activesync (connection settings -> uncheck "allow usb connections")
3. Connect your x1 to PC using USB cable.
4. Open mtty, select USB port and click OK.
5. Hit ENTER twice, you should see the "Cmd>" prompt.
6. Type the command "boot"
and its alive again but after restart need mtty to boot again.
so realy need to unlock cid to be god flashed

Very usefull thread. For CID unlocking need's HardSPL. arnisv, does this repair dead phones eg. stuck at tricolour (bootloader) screen ?

borce_razor said:
Very usefull thread. For CID unlocking need's HardSPL. arnisv, does this repair dead phones eg. stuck at tricolour (bootloader) screen ?
Click to expand...
Click to collapse
No, it doesn't work on my phone

ffffdddd said:
No, it doesn't work on my phone
Click to expand...
Click to collapse
Try this
Code:
MTTY (How to fix a bad ROM flash!) Hi,
I didn't see any post about using MTTY on Kaiser.
If I did a bad ROM flash with my previous device (HTC Universal), I could always fix this by clearing the FAT table with MTTY.
Believe me... if you flash and it stops ad 85% you will be very happy if you can use this tool!
Reason I started this thread is to help out people who are having such a problem with there Kaiser!
This is the correct procedure to get you out of trouble
1. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
2. put your device into the cradle
3. Run mtty and Choose WCEUSBSH001 in 'PORT' (if it doesn't show then you didn't stop all active sync processes above!)
4. type "set 16 0" without the quotes to tell bootloader to boot the OS after reset. (for some devices it can also be "set 14 0")
5. type "task 8" to get your device formatted
6. type "task 0" to ask your device reboot
7. take the device out of the cradle, and manually reset it if it does not do that already.
Incase of an emergency it could be very helpfull I think!
Thank you all for providing the input in this thread so I could make this small user manual!
Happy flashing!
Search for MTTY ver 1[1].42 or other, this is from our forum. It work's on Kaiser, maybe will work on xperia. And I'M NOT RESPONSIBLE FOR ANY DAMAGE DONE WITH THIS

Xperia HardSPL thread created

What rom is the swedish one? Newer or the same as it was delivered with?
Edit: Im new to windows mobile. What should i look for to check what version i have?

[email protected] said:
What build is the swedish on? Newer or the same as it was delivered with?
Click to expand...
Click to collapse
As i see it, it's the same as we allready have

borce_razor said:
Very usefull thread. For CID unlocking need's HardSPL. arnisv, does this repair dead phones eg. stuck at tricolour (bootloader) screen ?
Click to expand...
Click to collapse
no it just boots the phone in wm and all works exept can not restart the phone without myyt

If you turn off the phone it can't be booted again without mtty ?

borce_razor said:
If you turn off the phone it can't be booted again without mtty ?
Click to expand...
Click to collapse
yes need help of mtty

How its possible know which version have CID? All swedish version have CID but its able to unlock and after that u can flash to English OS?

ok after
Cmd>set 16 0
Cmd>task 14 0
now phone boots without mtty

borce_razor said:
Try this
Code:
MTTY (How to fix a bad ROM flash!) Hi,
I didn't see any post about using MTTY on Kaiser.
If I did a bad ROM flash with my previous device (HTC Universal), I could always fix this by clearing the FAT table with MTTY.
Believe me... if you flash and it stops ad 85% you will be very happy if you can use this tool!
Reason I started this thread is to help out people who are having such a problem with there Kaiser!
This is the correct procedure to get you out of trouble
1. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
2. put your device into the cradle
3. Run mtty and Choose WCEUSBSH001 in 'PORT' (if it doesn't show then you didn't stop all active sync processes above!)
4. type "set 16 0" without the quotes to tell bootloader to boot the OS after reset. (for some devices it can also be "set 14 0")
5. type "task 8" to get your device formatted
6. type "task 0" to ask your device reboot
7. take the device out of the cradle, and manually reset it if it does not do that already.
Incase of an emergency it could be very helpfull I think!
Thank you all for providing the input in this thread so I could make this small user manual!
Happy flashing!
Search for MTTY ver 1[1].42 or other, this is from our forum. It work's on Kaiser, maybe will work on xperia. And I'M NOT RESPONSIBLE FOR ANY DAMAGE DONE WITH THIS
Click to expand...
Click to collapse
Thanks a lot, my phone is working again, although its still in Swedish.