Database Users

Atom Pure GSM Signal Problem ! Help !

I recently have been given a 2nd hand Atom Pure, but when i insert any valid simcard, the atom won't get a signal.
I don't know if locked or unlocked, but I didn't get any warning like " Invalid Simcard " or something else, the atom just can't get any signal ( tried 3 different simcard from 3 different operator )
Anyone have any idea to repair it ? maybe reflash the Radio part ?
I have simmiliar problem with old Qtek smartphone which can't get off the "Flight Mode", tried reflash it didnot work, sent it to warranty and come back healthy ( the seal did not even teared, so maybe it can be done via software ?? )
I can't send it to warranty, cause my friend give it to me from out of country, and I even didn't know that my atom still in warranty period or not.
Please help, It would be a waste if I can't get the GSM part work again
BTW, the ROM 20060426B1WWE.
Thank you

did you tried to reflash ROM?

No, not yet.
I'll try it, as soon as I finish downloading, I'll post the result
Thank you

I download :Xda-Atom-ENG-20060426-MOT0822_1.exe
Flashed the ROM, another problem appear !!
Upgrading Image Rom .......... Succeed
Upgrading BootLoader........... Succeed
Upgrading Ext Rom............... Succeed
Upgrading Radio Stack........... Succeed
Burn Radio Stack.................. Connection Error
Now I stuck at Utility Update screen ???!!
Tried to flash it second time, still got the error
Any idea to fix this ????
Please Help. Thank you

try to flash the older rom

tried to reflash it again, with another PC new active sync 4.2, still the same problem.
Tried to download official rom update fromm seeo2.com, it says there's no update rom for my atom (based on IMEI number, already preloded with the latest ROM), so I can't find the link to download.
@kropotov
Thank you so much for helping me in short notice, If you don't mind would you please give me the link to the older ROM ?? Can't find it here in forum.
Thank you

Try this:
Xda-Atom-ENG-20060105.exe
http://www.rapidshare.ru/91168

@kropotov
Thank you !!, I'll post the result !!!

Just reflashed again with official rom (Xda-Atom-ENG-20060426.exe), "Connection Error" Again ! (tried on three different PC)
Is there another way beside reflashing the ROM ?
Thank you

Xda-Atom-ENG-20060105.exe the result is the same ! tried on 3 different pc.
Is there any way that I can update it via Mini SD card ?
Any other way ?? please help

I thing the problem - the radio stack is locked by operator.... Try to serch for "unlock radio stack"

see here
http://forum.xda-developers.com/showthread.php?t=266758&highlight=unlock+radio

I've read above link you gave me, but it seem all the tools must be used in healthy state or at least can enter in to bootloader mode. while mine can't do anything, stuck in update utility screen (tried all button combination known to man)
I found a way to enter in bootloader mode, but when enter bootloader with mini sd inserted (dummy) it says "Start downloading". what I'm asking which way downloading proccess ?? atom to SD or SD to Atom ?
I found WM5 tool for dumping rom, it not specified for certain device. If I enable to dump healthy image rom to SD (from another and the same version rom of Atom), Is there any way that I can flash it to broken atom without in boot loader mode ??
I will keep reading above link you give me, I will be waiting your next suggestion and help.
Thank you so much.

http://forum.xda-developers.com/showthread.php?t=276664

the problem is I can't get into bootloder mode, always stuck in Upgrade Utility????. tried all button combination though
thank's

Found a way, use rec + camera + reset button.
In DM mode choose Exit DM, and my Ayom live again !!!!!!
BUT, Can't find any GSM in Wireless Setting, WTF !!!!!!
Tried to reflash it again
Thanks

reflash it in normal mode, result GSM gone. reflash it second time in bootloader mode, result good, GSM setting come back, but still can't find any signal ?!
Do I get GSM hardware error ?? or something ??
Thank you

there's a Selftest app. in the programs group, should use it to see what result will return after a GSM module test.

Already did, Self test in program menu and in Diagnostic menu. All result OK.
Just can get signal, I can't make Emergency call either.
Opened the Atom, Antena ok, all seems normal.

wm6->linux->wm6 no sound->wm5 BRICKED!!!!! HELP

Well i have been searching for almost 8 hrs and i have not found the solution to bring back to life my beloved universal it does not turn on (but i can put it in bootloader mode) there ir no way i can't get the PC with xp to recognize my universal it all started when i was so happy that i had linux (qtopia) running in my universal with the phone and sms partially working the i got an incoming call that i could not answer so i restarted my uni to boot wince and BANG no sound and the microfone wasnt working either in WINCE so i hard-reseted to see if that helped, WELL it didnt so i reflash another WM6 ROM and that didnt help, then i tougth that flashing WM5 would help and BANG now my universal is bricked the process of flashing was completed but when i hard-reseted the phone it would not turn on so i hard-reseted again and nothing so i put it in bootloader mode and thats how its been since yesterday morning, i spent hours looking for the answer and nothing this is what i've tried so far hopefully somenoe with more knoleage than me will provide me with help (Just so you know im not new to flashing ROMS i've had in the past (3 wizards, 1 blue angel , 1 universal and 1 athena) all of them flashed by me with no problems whatsoever until i started with linux.
mtty
i always get an error that says "Can not open usb port" so i cant try the commands to get it out of bootloader mode.
i did kill the process wce***.exe and unclick the option in activesync "allow USB connection"
tried the utility made by buzz UNI_ExitBootloader and the same thing it says that port cannot be opened
flashing another ROM (wm6 or wm5)
i've tried all i have (3 wm6 witch i know they work because i have tried them all in my universal, 2 wm5 unknown if they work because i've had WM6 since day one),. i get diffent errors like CE ERROR or CONECTION ERROR , obvisouly due to the fact that my pc running xp and cant recognize my uni.
Im out of ideas i've hardreseted, softreseted, flash different roms, took out SIM and SD CARD, mtty is not working for me and my biggest concern is that my battery was at 50% when i flashed the last WM5 so if i keep trying the battery will die eventually and then i will not have any way to reflash or do anything with the phone and im in mexico so the closest person with another universal is 1000s of miles away fom me if anyone has a suggestion, link, program , info, rom or anything i will be more than greatful.
thanks for reading and if this get resolved it will be helpful to others with the same problem as me, meanwhile i would not downgrade to wm5 since that seems to have problems at least for me.
have a good day.

Try flashing using your SD card?

Need help upgrading bootloader - 2.03 to 2.10

Hi guys, you have been a great help to me so far, but I just can't find anythign to help me with this now. I have a hermes100 with WM6 and i just flashed the radio to 1.54.07 and it gave me an option for hardSPL and said that it was recommended so i investigated and found the upgrade for it.
I ran the wrapper file and it goes to the stage where it puts my hermes into flash mode but it displays "spl1.09" on the screen yet when push the ok and power keys during reset it shows "spl2.03"
it goes through the screens until it puts my phone into flash mode and it says it is trying to read my device then i get error code (260) that it isnt connected. Anyone know a way to fix this?

Use sd card method, page 116 on here: http://forum.xda-developers.com/showthread.php?t=296722
Hope this helps...Cheers...

okay, i tried the sd card method and it does the same thing. after it gets to the bootloader screen i just sits there with
"HERM100
IPL-SSPL by des
HERM 100
SPL-109.ds
serial"

okay, nevermind, i just had to reinstall the drivers for when i was in bootloader mode. I got it to work, thank you for you help.
cheers :-D

No problem, now you should be able to flash any hermes rom to your hearts content with the knowledge you have a safety net if something does(and probably will, as you'll find flashing addictive, sooner or later) go wrong. Pleae remember though that Hard SPL ISN'T a guarantee that you will be able to fix you phone, it just makes it easier when something goes wrong... Cheers....and happy flashing...

samterry1234 said:
okay, nevermind, i just had to reinstall the drivers for when i was in bootloader mode. I got it to work, thank you for you help.
cheers :-D
Click to expand...
Click to collapse
how did you do this?

Stuck in bootloader...

I am afraid my Polaris bricked, but I hope somebody knows a solution. Let me explain:
I turned off my device to get my microsd card out. I put the card in my cardreader to fill it with a lot of music. After that I inserted the card in the polaris, turned on the pda, and I got into the bootloader screen .
I tried to soft reset: bootloader screen again, tried to hard reset: bootloader, tried to flash original rom: rom update complete and after that bootloader, tried to flash several cooked roms: rom update complete and again the bootloader. When I try to charge my polaris it automatically turns on and goes to the bootloader. Flashing with microsd doesn't work. I also tried the thing with mtty, but it doesn't show the usb option in the list...
I DID hard-spl, I was using udk diamond R8 and never had any trouble before, while flashing about once a 2 months. I really am desperate, because I am unable to charge the pda now. I searched well and I only found threads of people who forgot to hard-spl before flashing custom roms.
I hope someone comes up with a brilliant idea, I love my Polaris way too much working and I don't want it to be a nice looking pda that doesn't work anymore.
PLEASE HELP!

I now manage to get into the mtty application, but I don't know if it is a good idea to use it. The problems I found here which could be solved with mtty are different from my problem I think. What would be wise to do? I flashed various original roms, and radios. That seems to work as normal, but after flashing I keep returning in the bootloader screen .
I hope one of you has an idea what to do. If it is something that is involving risk, I think I should do it anyway, because in this current state my Polaris is useless.

a few ideas! maybe they can help!
1) do you have warranty? you can restore back to original spl and then get HTC to ix it!
2) Try flashing your phone without the MicroSD card in place, maybe with the stock HTC Rom

Another option - try to delete all files from your memory card.

Thanks for the replies.
1) do you have warranty? you can restore back to original spl and then get HTC to ix it!
I read the thread about restoring back to original spl. There is stated that you can't restore to original spl if you are stuck in bootloader...
2) Try flashing your phone without the MicroSD card in place, maybe with the stock HTC Rom
I tried a lot of times, but every time after flashing has finished, I return to the bootloader
Another option - try to delete all files from your memory card.
I formatted my memory card in fat32, tried to flash with sd-card. When I turn on the phone it shows about 0.5 seconds something like "no rom image" and returns to bootloader screen
My cruise is still stuck, and I really think about trying things in mtty as a last resort... Anybody who knows what commands I should give in mtty in this situation? All help is appreciated, and if a suggestion makes my polaris work again I will donate the brilliant xda-member 20 euro's!

I have the same fault and have not found a solution. Every time I soft reset I am stuck in the boot loader screen. If I switch off the phone using comm manager then soft reset the phone will boot okay.
The only method I have found to be able to boot properly is to leave the battery out overnight and then start the phone in the morning. Always boots without a problem this way.
To make matters worse the USB port on my phone is broken...

imate jasjam error flashing pls help

hi anyone pls help,
i have one imate jasjam, the initial problem is i done a hard reset and the phone reboot and it wont finish running the customise application installation, after that the phone cant detect network, i had run a hard spl into the phone and then try to flash a rom that i download from forum but it only run 11% then stop then i realise that the rom i flash is for htc jasjam not imate jasjam, now my phone can only stay at the boot loader mode, i also try different rom but no luck so i think i ask for your help
here is my device details at the boot loader mode
IPL-1.04
SPL-2.10.01ipro
before i flash it i also cant find any radio rom version in this phone so i guess the radio rom also missing or what just not sure....
i think i flash the htc jasjam wrong model rom even now i flash back the original JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship this error message come out "ERROR [260]: update error" and it ask me to check my usb connection.
i search the forum and few member advice me to use mtty and i did tried that many time it didnt work, another member advice me to use this method "Formate yr memorycard & Unzip attached file in your memorycard named Hermimg.nbh & put yr cell in boot mode & follow screen instructions..........this illl boot yr celll out to boot mode......... " i tried that but the phone always stay at boot mode and no other instructions came out at all so im really lost and just hoping somebody can help me solve this problem...
can anyone pls guide me step by step of how to flash this phone back to normal, your help is much appreciated, many thanks.

Hi, i had the same problem flashing from the SD card. Are you using Vista or Windows7? I tried with Vista Format card, drag and drop renamed image onto sd card. Stuck it in the phone, reset and like you say hangs on bootloader. Then i tried the same thing from my Windows XP laptop, exactly the same format, rename drag and drop and everything works fine. Hope this helps

first i tried with vista then i tried with xp the problem still there, any other idea to solve this problem? thanks anyway for your advice

roms?
G'day, I've only really been reading about roms and these phones for only a few hours but I'm pretty sure that htc jasjam and imate jasjam are one and the same phone i think the said rom are used with all hermes type phones..
thanks and sorry for my ignorance if i'm mistaken