Database Users

MAGICIAN PROBLEM-BRIGHT DOWN WHEN SWITCHED OFF

Hi everybody!,
I'm really pleased with my new magician, but I have a little problem.
When I push the on/off button to switch the screen off (the phone is still on), and I want to switch it on again, the screen has the bright level at its minimum, so I can't see anything, and I have to go settings to raise the bright again.
Any known solution?
thanks,
Pau

Hi Pau,
When you press the power short your magician will go in standby. Press power long to dimm the screen, press it long again to switch to normal brightness. You can switch off the phone function by putting it into flight-mode. That's why the phone profile apps are popular.
A PocketPC can't be switched of complete. You would turn of all PDA functions as well, so no reminders etc. Not exactly what you expect from a PDA.
Hope this helps you. When your problem with the brightness persists, then try a hard-reset (press power & soft-reset at same time), don't forget to backup first with Sprite (trial available) or simular, xbackup can give you problems restoring contacts&appointments.
Still problems? Go back to where you bought it & get another one.
M

Thank you very much, it works the way you explain !!!!
thanks

You're welcome, these simple things are questioning all new users, including myself .
M

this helped me realise that there is no real SHUTDOWN option on the phone Till now i thought my phone was messed up

Damn for 3 days i was reading the whole Manual, and thought i cnat switch it off, there is phone porblem why the hell they indicate in Manual press more then 2 sec and it trurns it off. Now I know why lol :lol:
Btw which application can turn it off with one click on today screen without going in to flight mode etc ?
Thanks

You can use VJEschaton for it, SPB Pocket Plus etc etc. They all can suspend or switch off the screen with a single click on the today screen.
M

oltp said:
You can use VJEschaton for it, SPB Pocket Plus etc etc. They all can suspend or switch off the screen with a single click on the today screen.
M
Click to expand...
Click to collapse
Or also you can use psShutXp it's free and it's a great program

oltp said:
You can use VJEschaton for it, SPB Pocket Plus etc etc. They all can suspend or switch off the screen with a single click on the today screen.
M
Click to expand...
Click to collapse
Thaks for the reply I dont see Turn off in Pocket plus, I oly have Suspend and Sof Reset, where is that item ?
Skyward what do psShutXp do ? as i dont want to install thoussand of applications as I already have pocket plus installed
Thanks

There's no 'off' regarding your device. Suspend is the same as pressing the power button. I always use the 'screen toggle' option from spb (located in system like the suspend & soft reset option)
Cheers, M

[REQ] Diamond Lock

To all good developers out there.
I (we) need a DeviceLock Application for the Touch Diamond cause existing lock APPs are to buggy for the Diamond. One is extremly draining the battery and dont lock all hardware keys another one lock all keys but slows down the device that the incoming call is not shown.
I am searching for a simple application that locks the device after I press the power button and unlock it by a slide to right on the TouchScreen. Same if a call is incoming.
Not more!!! A simple lock without additional features. Is there a way that anyone can develop this?????

What about the standard device lock that comes with WM?
You can also activate a today plugin for it, so on your today screen you press on the lock and your device is locked and the screen light is dimmed down and after some more time shut off.
Or you press the power button, then the device is locked and the screen light is immediately shut off.
To unlock you only need to press two buttons on the screen.
To unlock you can also press the power button to turn on the device and then pull out the stylus, no need to press the screen because with these two actions the device is also unlocked.
What's wrong about the standard WM device lock?

standard WM device lock is stupid! it is very difficult to unlock device in daylight. Gray button on gray background and dim backlight... what can be worst?
If anyone know how to change colors in that screen - it would be great!

pathologo said:
What about the standard device lock that comes with WM?
You can also activate a today plugin for it, so on your today screen you press on the lock and your device is locked and the screen light is dimmed down and after some more time shut off.
Or you press the power button, then the device is locked and the screen light is immediately shut off.
To unlock you only need to press two buttons on the screen.
To unlock you can also press the power button to turn on the device and then pull out the stylus, no need to press the screen because with these two actions the device is also unlocked.
What's wrong about the standard WM device lock?
Click to expand...
Click to collapse
You now that the internal Device Lock not work if you get a call???

Alexx_B said:
it is very difficult to unlock device in daylight. Gray button on gray background and dim backlight... what can be worst?
Click to expand...
Click to collapse
That's true! I forgot that, although I encountered that myself today.

Alexx_B said:
it is very difficult to unlock device in daylight. Gray button on gray background and dim backlight... what can be worst?
Click to expand...
Click to collapse
That's true! I forgot that, although I encountered that myself today.
Atze001 said:
You now that the internal Device Lock not work if you get a call???
Click to expand...
Click to collapse
Ok, that's a point. The screen is unlocked and things could happen unintentionally.

There is a thread about this, with some idea, but I think there is no good solution yet for this issue:
http://forum.xda-developers.com/showthread.php?t=414731

try this
Hi all
have you try Throttlelocker ?
i have install on my Diamond and it run good. light version, no battery problem, skinnable........
i think can be a good compromise.
main point: Throttlelocker can totally lock the device.
problem: you need to turn device in suspend mode manually. since now i have not found a way to use it under the backlight.
ciao

I personally use S2U2, it works perfectly on the Diamond and is fairly easy to unlock. The Slide 2 Answer feature is pretty good too - stopps you accidentally answering calls.

poedgirl said:
I personally use S2U2, it works perfectly on the Diamond and is fairly easy to unlock. The Slide 2 Answer feature is pretty good too - stopps you accidentally answering calls.
Click to expand...
Click to collapse
Which version did you use? I tested the 3 last versions and have extrem battery drain and the "home"-key is not locked.

giangishanghai said:
Hi all
have you try Throttlelocker ?
i have install on my Diamond and it run good. light version, no battery problem, skinnable........
i think can be a good compromise.
main point: Throttlelocker can totally lock the device.
problem: you need to turn device in suspend mode manually. since now i have not found a way to use it under the backlight.
ciao
Click to expand...
Click to collapse
Did throttlelocker lock the phone on incoming calls?

Atze001 said:
Did throttlelocker lock the phone on incoming calls?
Click to expand...
Click to collapse
when a call is coming you ll see the wm incoming call screen, if you dont reply phone turn to lock.
ciao

Atze001 said:
Which version did you use? I tested the 3 last versions and have extrem battery drain and the "home"-key is not locked.
Click to expand...
Click to collapse
infact on Diamond S2U2 dont lock the home button, and battery slow down very very fast, expecially last version.
with S2U2 battery life is less than one day (medium device usage)
with Throttlelocker battery life is more than 2 days (medium usage too)
due to the fact that diamond have little (big!) batteryproblem, for me better to use Throttlelocker.
ciao
here is mine........

giangishanghai said:
when a call is coming you ll see the wm incoming call screen, if you dont reply phone turn to lock.
ciao
Click to expand...
Click to collapse
And that is the problem. At work I carry my phone in my pocket and if I get a call and dont recognize them my phone answer the call. That is the reason I want a lock software that locks on calls although.

Atze001 said:
And that is the problem. At work I carry my phone in my pocket and if I get a call and dont recognize them my phone answer the call. That is the reason I want a lock software that locks on calls although.
Click to expand...
Click to collapse
maybe i have not got your meaning.........what means "my phone answer the call" ?
by the way i have not this problem.
hope you can solve yours!!!!!!
ciao

I use this which I think is simply put the best autolock for windows mobile. Customizable actions, my advice, keep it simple.
http://forum.xda-developers.com/showthread.php?t=386451&highlight=autolock

giangishanghai said:
maybe i have not got your meaning.........what means "my phone answer the call" ?
by the way i have not this problem.
hope you can solve yours!!!!!!
ciao
Click to expand...
Click to collapse
I mean if my phone is in my pants pocket and I got an incoming call and dont notice that. Then it often happend that I touch the phone or if I pull it out of the pocket I touch on the red button.

zmob123 said:
I use this which I think is simply put the best autolock for windows mobile. Customizable actions, my advice, keep it simple.
http://forum.xda-developers.com/showthread.php?t=386451&highlight=autolock
Click to expand...
Click to collapse
I know this but it doesn´t run without errors on Touch Diamond. See my post in this thread.

[APP] SensorLock
Hi Atze001,
try to have a look at Sensor lock, (Themes, Applications and Software , http://forum.xda-developers.com/showthread.php?t=422871).
maybe this app. can solve your problem.
ciao

I haven't noticed any battery problems when using S2U2 on my diamond. Every time I put my phone down, i invoke S2U2 (I have it mapped to the long press call button - never automatically, maybe this has something to do with it).
I can normally go about 3-4 days on a single charge while S2U2 is running when I'm not using it.
The version I'm using is 1.18, but I'm going to update it soon.

Locking / S2U2 / Stand by questions

Hi folks
I'm back again with some more dumb questions (bear with me - I'm Irish).
On my old Nokia, I could lock the phone by pressing 2 keys and hey presto, phone now safe!
With the HD, things seem a bit complex. Firstly, there's power managenent that controls how long the back light stays on for and how long the phone stays on for before going into stand by.
Q1. Is standby not another form of locking ? If so why not just press th epower button whenever you want to lock the phone and be done with it ?
Then there is the built in locking software that comes with the app.
Q2. Whats the problem with this? (i.e. long pressing the end key and choosing 'Lock the device'; Why do we even need S2U2 ?
Then there's S2U2 itself. The settings page is long and complex.
Q3. Is there a S2U2 manual anywhere ? (to explain some of those ambiguous settings)
Finally, and here is my most important question...
Q4. Can I use my HD like I used to use my Noika - i.e. press a key or 2 to lock the goddam phone an just be done with it ?
As it is, when I want to use my phone, I have to press the power button to take it out of standby, and then I have to slide the S2U2 unlock switch. Its a lot of hassle just to make a phone call.
Is it me? Am I that stupid? What am I doing wrong ? What am I missing ?

Doesn't pressing the "End call" button for 2-3 seconds also lock the phone?
Regards!

I do understand what you're saying. I figured out something really basic just the other day, that is if your phone is locked or in sleep mode just pull out your stylus and it'll unlock and wake up.
Just 1 movement.
Sorry if this is really common knowledge and you already know this but sometimes we overlook the more basic functions on such a complex device!!
Cheers
DB

Power button into standby is a fine lock for me. Nearly impossible to accidently knock the power button to turn it back on.

jon- said:
Power button into standby is a fine lock for me. Nearly impossible to accidently knock the power button to turn it back on.
Click to expand...
Click to collapse
Yep i do this too.
Press the power button mate, and it will lock the phone
I like how the phone unlocks when you take the stylus out but i didnt like how it locks the phone when you put the stylus back in, so i removed that function using the options in gyrator

I have got TOUCH HD since 1week.
I haven't problem with touch hd like touch diamond.
it is in my pocket but the new phone canvas and the sensitive key prenve nt missing call.
for me no need s2u2 or pocket shield like diamond.

is there a registry option for disabling the unlock when the stylus is removed/falls out ????

matou25 said:
I have got TOUCH HD since 1week.
I haven't problem with touch hd like touch diamond.
it is in my pocket but the new phone canvas and the sensitive key prenve nt missing call.
for me no need s2u2 or pocket shield like diamond.
Click to expand...
Click to collapse
why my HD no "Phone Canvas"?

Jezwick said:
is there a registry option for disabling the unlock when the stylus is removed/falls out ????
Click to expand...
Click to collapse
I searched a long time for this, but I didn´t find a solution

Standby locking
I also "lock" my phone by sending it to standby with the power button. This seems to work realy good for me. The only problem is that the HD wakes up if someone is calling. So i often answer a call by accident. Does anyone know a way to deactivate the automatic wake up?
I tried the registry hack with autolocking but this doesn't work for calls either.

surfaczer said:
I also "lock" my phone by sending it to standby with the power button. This seems to work realy good for me. The only problem is that the HD wakes up if someone is calling. So i often answer a call by accident. Does anyone know a way to deactivate the automatic wake up?
I tried the registry hack with autolocking but this doesn't work for calls either.
Click to expand...
Click to collapse
Have you tried HDTweak?

ScarySquirrel said:
Have you tried HDTweak?
Click to expand...
Click to collapse
Please explain

device lock
gt112 said:
Hi folks
I'm back again with some more dumb questions (bear with me - I'm Irish).
On my old Nokia, I could lock the phone by pressing 2 keys and hey presto, phone now safe!
With the HD, things seem a bit complex. Firstly, there's power managenent that controls how long the back light stays on for and how long the phone stays on for before going into stand by.
Q1. Is standby not another form of locking ? If so why not just press th epower button whenever you want to lock the phone and be done with it ?
Then there is the built in locking software that comes with the app.
Q2. Whats the problem with this? (i.e. long pressing the end key and choosing 'Lock the device'; Why do we even need S2U2 ?
Then there's S2U2 itself. The settings page is long and complex.
Q3. Is there a S2U2 manual anywhere ? (to explain some of those ambiguous settings)
Finally, and here is my most important question...
Q4. Can I use my HD like I used to use my Noika - i.e. press a key or 2 to lock the goddam phone an just be done with it ?
As it is, when I want to use my phone, I have to press the power button to take it out of standby, and then I have to slide the S2U2 unlock switch. Its a lot of hassle just to make a phone call.
Is it me? Am I that stupid? What am I doing wrong ? What am I missing ?
Click to expand...
Click to collapse
Hi try this small cab - cant remember where I got it from but it works!!
just install to device and then add into programs launch or start menu.
regards
jon

JPW said:
Hi try this small cab - cant remember where I got it from but it works!!
just install to device and then add into programs launch or start menu.
regards
jon
Click to expand...
Click to collapse
You're Irish too, I presume?
The other option is you attached a very small cab.

OOOPS forgot cab
have edited post now
Jon

Should the device lock when I put the stylus in? I get the impression from this thread that it should but mine doesn't?

app to turn on an off device

would there be an application that will turn on the device when it's OFF. Reason behind this is that my power button wasn't working anymore so I need an app to turn on my phone. Apparently, my alternate route is using AE button plus for turning off, and to turn on my phone is that I have to take out the stylus, but I noticed that it used to consume battery usage...if I take it out on the second time it will eat up 2% of the battery usage...and I had even tried using the switch display off/on with the AE button plus but it will make my usage with my phone for upto 8 complete hours only....before I can even use my phone upto 12-14 hours...
if not an application, maybe remapping or registry hack will help..
please I need some help..
thanks in advance

anyone who could share or help.....thanks

What type is ur pda? Do u mean turn on from COMPLETELY turn off?

Go to Start,Settings,System,Key Lock and set it to "Do not lock buttons".
This way, any button press on any button will wake the device. You might want to lock it before switching off so you don't dial people by mistake.

iam using HTC diamond and currently have the SUN 6.1 with 2.5 manila version, but it seems that the keylock doesn't work properly on that ROM
thanks for all your help, just asking some other options here

Touch Power Button....

.... is broken, no more ,...
Is there a way to assign some other button to do such a function,.. power on/off and stand=by on/off?
Tnx

you can lightly press the reset hole to turn it on and if you are gental enough it will turn it off with out turning it on

i guess i am not gentle enough ;(
I reset it every time,...
any other ways guys?
tnx

akyboy said:
i guess i am not gentle enough ;(
I reset it every time,...
any other ways guys?
tnx
Click to expand...
Click to collapse
Try HButton. I have the same issue on one of my Vogues...

egzthunder1 said:
Try HButton. I have the same issue on one of my Vogues...
Click to expand...
Click to collapse
Looks like there is no option to select to do sleep on/off.
that's what i actually need.
When phone is off, i can turn it on with reset hole. I don't need to be able to turn off phone. reset is enough.
I only need it to go to and off sleep. Now i am running it always on which is draining battery fast, couple of hours even with brightness lowered to 20%.
plsssss

I did try what brandonledski mention. but looks like it will only turn of screen but not on.

i could make you a shortcut under start menu for the power options as im not sure about being able to map it to another button

How i will turn on screen then ?

akyboy said:
How i will turn on screen then ?
Click to expand...
Click to collapse
oo crap ya i forgot about that ahahah lol ill look into this for you

ok found an answer, i could make a shortcut to the option to reset, shutdown or sleep functions and then what u do is got here
settings/system/key lock
and set it so no keys are locked

brandonledski said:
oo crap ya i forgot about that ahahah lol ill look into this for you
Click to expand...
Click to collapse
lol,... tnx!!
with AE Button, i am able to turn it off, but cant put it back On

akyboy said:
lol,... tnx!!
with AE Button, i am able to turn it off, but cant put it back On
Click to expand...
Click to collapse
so now we have a half solution

wait,... i got it!!!
i assigned left button hold for screen off on,... looks like its working!!!!
im testing it now,...
EDIT
Hm,.. i am using Phone Alarm and its adjusted to Shut Down after 15sec. If its shut off automatically with Phone Alarm i cant use AE Button to turn it ON. Hm i guess these are different functions?

akyboy said:
wait,... i got it!!!
i assigned left button hold for screen off on,... looks like its working!!!!
im testing it now,...
EDIT
Hm,.. i am using Phone Alarm and its adjusted to Shut Down after 15sec. If its shut off automatically with Phone Alarm i cant use AE Button to turn it ON. Hm i guess these are different functions?
Click to expand...
Click to collapse
AE Button only works when your phone is on, to cold boot your phone you would have to hit the reset button

brandonledski said:
AE Button only works when your phone is on, to cold boot your phone you would have to hit the reset button
Click to expand...
Click to collapse
So i guess ill adjust Phone Alarm setting not to shut off display, leave ON, then do it manually every time i need with AE buttons
EDIT:
Hm,... so i adjusted Phone Alarm not to touch power options,.... AE works for ON/OFF Display, but looks like when its off for some time i cant turn it on any more,.... only if i am switching it off/on one after another
EDIT: Actualy problem was Auto Locking app, as soon as phone is locked i cant ON any more,.... ill try to see if i can add exception in this auto locking app ( its CSDevCtrl APP)

Lock all buttons was an option available for older devices, which should still be available via reg edit (as brandolenski mentioned). I'm gonna try that myself.

AE Button kinda works but battery is draining faaaast.
If i can somehow resume phone from `Shutdown` mode which is set by Phone Alarm (http://www.pocketmax.net/phoneAlarm.html) that would solve problem. This mode i guess put phone in Stand-By (save battery) not only turn off display as in AE Buttons