Hi Guys,
I hope someone can help me with this:
I did a complete reset of my Shift (this F3 thing...) and everything worked fine. Everything was set up like it was when I first started the Shift.
After some days of use the SnapVue Side claimed "not enough memory, delete unused programs, blablabla"
The device is not liberated (this time ) and I didn't set up/use the email client.
I didn't even start the Weather forecast program.
In fact, I only used SnapVue once to get the mobile connection up and running.
Now I had the problem that I was not able to use snapvue which means I can't activate/deactivate the modem.
After a couple of tries (restart, disconnect battery, etc.) SnapVue stopped working (black screen, no audio in Vista) and I wasn't able to acces it.
I had to use the Bootloader to reset it.
Now, SnapVue is very unstable and needs to be soft-resetted every one or two days. Otherwise it stops working completely.
another F3-Reset did not help.
Any Ideas... anyone?
very interesting. maybe the low memory thing is being triggered for a false reason. the upcoming custom rom will have this stupid thing removed (or at least the limit will be changed to a more sensible value).
Related
Hi folks,
I've noticed a weird problem on my new Jam over the last couple of days. Sometimes when entering text e.g email, text msg, instant messenger etc.. if I select the Phone Pad option a blank screen appears. If I then choose Keypad the same blank screen appears.
Performing a soft-reset clears the problem as has occasionally closing all windows and starting again.
Has anyone else experienced this ??
Regards,
Russ.
I have exactly the same problem!
The problem only happens when changing between Intellipad and another input method.
A couple of people are experiencing the same thing, but they're attributing the problem to Microsoft Voice Command 1.5 (which I don't have),
I have made Intellipad my default Input method, so I can type sms' if I have to, but the moment I change to another input method (Fitaly), I'm stuck with the non-intellipad methods. If I try to select Intellipad, I lose all input methods, getting the blank box, which only a soft reset will cure.
HI!
I have been facing the same problem too. The blank screen appears and only a soft reset does the trick. At times when I try switching between the keyboard and phoen pad....the phone pad does not come on and it remains stuck on the keyboard.....and again only a soft reset makes it work.
U
This may be premature, but my problem seems to have disappeared..
Yesterday I downloaded and ran Sin's WM 2003SE 2.02 and 2.06 combined update on my XDA II (after having run Mysteryman's update since it came out), and it *looks* like the problem is gone..
And I get proper headset support thrown in to boot! Yay!
Software crash
I had this problem before when I was using my XDA2.. (WM2003SE upgraded)
So far i can think of, the reason might be a software crash.. on mine is pocketbreeze..
hard reset your device, don't install anything, see how it goes. If its working, install 1 software per week, and see which software is causing this..
now i'm using mini and haven't install pocketbreeze, and haven't lost the phone pad for 3 days!
hope it helps..
sheggario
Maybe you are right as I have installed PocketBreeze too on my Mini and maybe it is a software conflict between that and windows.
I think I finally found a solution...
On my MDA2 (XDA2) I have installed Microsoft Voice Command 1.5 and I think this is causing problems with the Intellipad (Phonepad) application. To fix this you only need to disable VC from the Settings screen (uncheck Voice Command), once you do that, you will be able to get your Intellipad functional again (as long as you don't get the empty keyboard, in which case you need to soft-reset).
If I'm on the road and need Voice Command, I just click on my hardware button to call it, however, it will take a few seconds to start it up (since it was disabled) but VC it will work as usual after that.
Eventually I will get the Intellpad problem again (since VC is reactivated) and need to redo the whole VC Disable thing.
I hope this works for you....
Best regards,
Rayan
I've tried both installing and uninstalling spb pocket plus, and the enabling and disabling of voice command, and there seems to be no real rhyme or reason to the disappearance.
That being said, I have noticed that it tends to start disappearing when my "program" memory drops to around the 10mb mark. I've experimented with freeing running memory, and usually if I free around 5mb or so, it starts working again, but this is not conclusive.
I had the same prob. I installed resco keyboard and the problem went away. Strange ??
I understand that this forum is filled with developers. So I am hoping for some informed help. If you have any of these same problems please respond as well. I would like to know if these are isolated to my setup
I migrated from a cel phone and a PPC running WM2003/2003se. Mainly for the converged device, but also for the persistent storage. I run a small business, and and am very busy and rely on my phone and schedule all day everyday.
I have only had the wizard (MDA) for about 3 weeks and experienced odd problems since the first weekhttp://forum.xda-developers.com/images/smilies/eek.gif
. Unfortunately I did not buy new, so I am not sure if any of these are covered by warranty or not... I am just going to list the problems:
1) If I leave my phone plugged in at night to charge than by the time I wake up the phone will not come out of standby. I have to press the soft reset button to get the unit to work again. This happens intermittently
2) I use an alarm program so that the unit acts like an alarm clock. If the phone is plugged in at night, and does not experience problem number 1, than the alarm just won't go off. I turn on the phone and the alarm program is open, but it did nothing. If the phone is not plugged in than the alarm works fine.
3) Soft buttons. I have the registry set to remap what the soft buttons do. I use Agenda Fusion (Latest Version) so i have them set to open the calendar and the contacts to Agenda Fusions view of them. This works most of the time. On occasion the soft buttons just stop working except for running through the menus for reminders.....
4)The other day i went to take a photo, the camera said that it could not proceed because there was not enough memory. At the time I had 30 megs of storage free, about 12 megs of program free and about 900 meg left on my sd card...
5) Every so often the unit won't launch a program, it says that the exe is unsigned or not trusted. It works every other time though.
6) I use cLaunch. Every so often cLaunch disappears from the today screen. The only wat to get it to reappear is to remove it from the today screen from the today items menu, wait a couple of seconds and then return it to the today screen.
7) Every so often the unit stops recognizing the sd card..have to remove and re-insert
8) I use reminders for all my calender and to do items. Occasionally the reminder will go off for a certain item 24 hours in advance, even though the setting is correct in the item...
I feel like I am missing a few problems. But you get might point, WM5 is weird. All of the above can be corrected with a soft reset. But sometimes the problems show up multiple times a day. Causing me to have to soft reset in the most inconvenient times, several times a day.http://forum.xda-developers.com/images/smilies/mad.gif
I did not have these problems under WM2003. I have a friend who uses a Verzion phone that is similar to the wizard (made by a different company though, not HTC...it has an external antennae and that is where the stylus is stored as well) She and I were comparing phones today. Hers runs WM5 but she said that she has never experienced any of these problems in the 1 year that she has owned hers...
Is this an HTC Wizard problem? A WM5 problem with the wizards? Would it help if i installed on of the alternate roms that I read about here on XDA developers? I am considering a hard reset and starting from scratch but I don't want to go that route unless it is the only way. And if I do, I may just use one of those roms.....What does everybody think?http://forum.xda-developers.com/images/smilies/confused.gif
Sorry for the long winded post....
Seems like a software problem based on (1) and (2). Is the ROM an official ROM?
Re:
Hello Hanmin Thanks for responding,
Re Number 1. I just saw that some one else posted with that problem. So I will see if they have they same alarm program installed. I have wondered if everything is software related. Thats why I am hoping to see if others are having these types of problems, and if so, what programs they are using...
Re the rom...yes it the official T-mobile release, version listed in my sig.
Thanks again
New problem
I have just encountered a new problem:
While picking up my voice mail the system would not register my button pushes. Weather on screen or the hardware buttons. I could not interact with voice mail, nor could I end the call with the hardware button or the soft button....I had to reset the phone to end the call!!
How frustrating is that
Have you tried reflashing the original ROM? Being a used phone that would be the first thing I would do. It's going to wipe out all your data and return it to an "out of box" state, so i suggest backing up anything important and sync to your PC. If that doesn't work then you have a hardware issue but I'm willing to bet that should take care of it. You can find the original ROM on HTP's website. Good Luck
Thank you
Thanks for that suggestion....I am hoping to not go down that road, if I can help it. But I will do it if there are no other options. So If I may ask: How many votes does re flashing old Rom Get? And are there any other ideas?
Again Thanks. I am going to download the rom in case it does come to that....
wait...the phone dosen't wake up unless you push the small button on the top of the phone? That is not the default setting on the MDA, however it's acting naturally. Our phones go on a standby to save power. Click the battery icon in the lower right hand corner-->Click the Advanced tab--> uncheck Turn off device on external power
Misunderstanding....
When the phone is plugged in over night and reaches %100 charge some times it won't "Wake Up" even hitting the power button on top. The only thing that will turn it on is the "Soft Reset" button on the right side, beneath the IR sensor.
bump
no text
No text
Just bumping
It sounds like you have software problems - possible a corrupt notification queue - personally i would do a hard reset of the device - probably in the process of this i would soft reset before the t-mobile extras install - taking details of gprs, mms settings before this.
I would run the phone without installing software to see that its not a hardware problem. Then reinstall programs one by one and see how it goes. Some software like claunch is not made for wm5 so expect some glitches (i use claunch and get occ glitch)
If you dont want to hard reset check the notification queue for duplicates and rogue scripts using check notifications - attached - install via pc. Dont delete notifications important for system running - common duplicates are clock\calendar.
alarm problems
Hi,
frankly i had similar issues - less critical but annoying: alarm clock not waking me up, slow system, notification queue mess, difficult resets, camera issues, bluetooth a2dp skipping. I upgraded my Qtek multiple times, and finally i can say that 2.26 roms (i use molski's) are exceptionally stable and reliable. The problem is not Wm5, the problem is how buggy many released versions are. So, my suggestion: look to the forum, find roms that appear to have a reliable history, cross your fingers and...upgrade. Then, resist in upgrading to any rom that just came out and appear to be faster, cooler, nicer. Unless you have an issue to be solved, and you see 100 messages confirming that the rom is stable and does the job...
Thank you meschle and pzucchel for the thorough answers. I am going to try the notification queue first.
@ Meschle: where do I find the gprs, & mms settings? And should I just copy them down by hand? Then after re-starting w/out tmobile crap, do I just put these settings in the same place as where I found them?
@ Pzucchel: Do you believe that Molski's 2.26 is more stable than the Tmobile factory installed 2.26?
Thanks again
cameraddict said:
Thank you meschle and pzucchel for the thorough answers. I am going to try the notification queue first.
@ Meschle: where do I find the gprs, & mms settings? And should I just copy them down by hand? Then after re-starting w/out tmobile crap, do I just put these settings in the same place as where I found them?
@ Pzucchel: Do you believe that Molski's 2.26 is more stable than the Tmobile factory installed 2.26?
Thanks again
Click to expand...
Click to collapse
Write them down manually its the safest way - there are cabs available but often dont work.
GPRS - settings\connections\connections\manage existing connectons - settings should be here prob named t-mobile
MMS - go into messages\menu\options\MMS\servers click on prob t mobile again.
Thanks again!
Hi,
This is my first post here and obviously it's a problem related issue.
I have my HTC TOUCH HD, for about 1 week now.
Everything worked great, until yesterday, when i tried to install the following:
- installed the HTC Hotfix for responsivness, seemed to work fine.
- than i wanted my phoen call to be announced with voice, so i tried to findVoiceCommand (cracked, shame on me)
- downloaded something from this forum, that was posted on rapid share.
Oh Joy and than the problems started:
- It gave an error when installing
- than o n reboot, it toook waaay to long to boot up.
- than i tried to go into the settings to remove it.
Now, EVERYTIME i try to enter the settings, it just freezes, i can not access anyting any more, not even the upper power button, only taking out the battery will work.
Rebooting, i used total commander (thank God i had it installed before) to delete the startup link for voice commander and the entiere voice commander folder.
Now, unfortunate this did not do the trick.
Accessing the settings button will still freeze my HD (
I am very very very frustrated, do not know how to restore it to previous state. Pretty please someone can guide me what to do ?
Thank you in Advance.
ps: everything else seems to work fine, though
Do you think hard reset is the best way??
Yes, unfortunate, this was my only solution.
After digging for more than 4 hours, sleeping 4 hours, digging more hours, i gave up and did a hard reset.
(i even had to digg that up too )
Now everything is back to normal, BUT my weather application is not updating through GPRS / 3G any more, only through wireless.
There is no option for me to set it through what connection it should connect
(Only in coinnection manager, and there its set fine, i already tried everything, and internet seems to work, just fine)
sneila said:
After digging for more than 4 hours, sleeping 4 hours, digging more hours, i gave up and did a hard reset.
(i even had to digg that up too )
Click to expand...
Click to collapse
WIKI nr 32 of this page
Same thing happend to me. I have now managed to get back into my settings. I think there are two ways.
1. Use active sync to remove the program
2. I installed the 1.5 trail version (which doesn't run) but let me back into settings so I could uninstall MSVC and then uninstall the trail.
start up still seems a bit slow and the first time you press settings it is a little slow going in but after the first time it is fine.
The better option might be a hard reset but it isn't one for me at the moment as I have far to much stuff to re-install and setup. I really want MS voice commander but I am to scared to try and install any versions
sound like the program had a virus maybe
go to startup in windows explorer and remove the shortcut related to it. this will solve the problem.
Damn stop listening to people that quickly tell you to hard reset.
I had a similar problem in which i couldn't access Settings to remove the program that was causing it.
I connected the phone to ActiveSync and you can easily the program from there. Problem solved.
Another way to uninstall would be to launch the CAB file again (the one with the "bad" program). You will asked if you should remove the old version first, say yes, then cancel installation when it asks where to save the new version. Together with a soft-reset thereafter, in most cases it should work out ...
With my x7501 I can connect in bootloader. Just flashed factory ROM, the Michy's 6.1 clean. In both ROMs I get the "failed to connect" sound from my PC in the fisrt boot screen, just when the red text disappears (and of course, then, nothing happens reagrding the connection). I can connect my wizard and sync.
Lately:
I installed Shantz Today Changer, uninstalled a dumb Minsweeper game (my four-year-old loves the OEM version). I've been having some PC issues, like dropping wifi every few minutes, Google Chrome crashed the OS so I uninstalled, and Quicklaunch icons show up funny occaisionally. My BT also isn't working, (Broadcom stack) software can't find the local device.
So whatever happened to "cable is stable"? Anyone up for a puzzle and kind enough to give me a clue?
Next steps: restore from Sprite Backup and keep popping out my card to exchange files (sneaker mail, anyone?). I'll probably live without Desktop Outlook until I get this solved, since I started using Flexmail and Pocket Informant, I can pretty much do what I need to do on the handheld and have to take it with me, but what a hassle (yes, I'm spoiled). I will try another PC, too.
Working for now
I waited overnight, let it reboot twice as per my nightly routine, this morning unchecked "Enable advanced network functionality" under USB-to-PC in the system tab of Settings. I have a funny feeling that anything I did didn't make a difference, since it all happened so early in the ROM loading process.
I hope the thread helps someone who runs into the same problem.
I am so tired of all the WTF moments in WM. I guess, no matter what, if you want it all, you have to fight for it and deal with the setbacks.
I have just got a HD2, and used activesync successfully for the last 2 days to sync contacts and load the HTC hotfixes from their web site. Today however, it has just stopped working. The phone connects (but takes a very long time) and starts the sync process, but then the progress bar doesn't move at all for ages or sometimes moves to about half way in 10 minutes but won't get any further.
Before the status bar starts moving and randomly during the sync process I get the message "A problem has occured with services.exe Please tell microsoft about this problem...." The status bar usually starts moving a little after sending this error report. I also get the message "A problem has occured with connmgr.exe...."
Trying to stop activesync freezes the device completely for several minutes but it usually frees eventually although I have had pull the battery a couple of times.
Occasionally when it does start I get the warning message "There has been a change made on your server that requires you to re-synchronize all items on your device. All changes made since your last successful sync will be lost. Do you wish to continue?" although I have made no changes whatsoever on the PC. I've never come across a message like this from activesync before on any other device.
Has anyone had these problems or have any idea how I can fix them?
Cheers
Do you have sync problems with 3G or with USB? It usually happens to me with USB.
Try this. At Settings|Wireless, turn off Direct Push. Turn off Data connection. Go to mail. Do a Menu|SendReceive. If it works, then go back to enable those two options. I have no idea why but this often works.
Unpluging the USB often makes it better.
delete profiles in actvie
sync tools->active sync
soft reset
sync again
Be happy
Sfr0g, how do I delete the profile? I can't find that option.
Cheers