Activesync not syncing any more - HD2 General

I have just got a HD2, and used activesync successfully for the last 2 days to sync contacts and load the HTC hotfixes from their web site. Today however, it has just stopped working. The phone connects (but takes a very long time) and starts the sync process, but then the progress bar doesn't move at all for ages or sometimes moves to about half way in 10 minutes but won't get any further.
Before the status bar starts moving and randomly during the sync process I get the message "A problem has occured with services.exe Please tell microsoft about this problem...." The status bar usually starts moving a little after sending this error report. I also get the message "A problem has occured with connmgr.exe...."
Trying to stop activesync freezes the device completely for several minutes but it usually frees eventually although I have had pull the battery a couple of times.
Occasionally when it does start I get the warning message "There has been a change made on your server that requires you to re-synchronize all items on your device. All changes made since your last successful sync will be lost. Do you wish to continue?" although I have made no changes whatsoever on the PC. I've never come across a message like this from activesync before on any other device.
Has anyone had these problems or have any idea how I can fix them?
Cheers

Do you have sync problems with 3G or with USB? It usually happens to me with USB.
Try this. At Settings|Wireless, turn off Direct Push. Turn off Data connection. Go to mail. Do a Menu|SendReceive. If it works, then go back to enable those two options. I have no idea why but this often works.
Unpluging the USB often makes it better.

delete profiles in actvie
sync tools->active sync
soft reset
sync again
Be happy

Sfr0g, how do I delete the profile? I can't find that option.
Cheers

Related

frequent lockups

Hi
Im noticing that the xdaII tends to lockup more often than the xda1.
Often if i try and switch it on with the power key, nothing happens. Need to soft reboot it.
Other times, the menus and actions go very slow. Other times, the contacts wont display, now matter how often the contact button is pressed.
any thoughts?
I have noticed a few locks usually when trying to end a phone call....just doesn't respond and needs a soft-reset.
It also sometimes takes AGES to power on or get to the bluetooth screen...
Better than XDA1 though!
R
Same here, and when someone tries to call me, it seems to me that the Phone does not react on an incoming call too. I've just tried it when i found my Qtek 2020 locked again. I can't put it on, but both blue and yellow leds are flashing. I called myself again, but it does not respond. This is definetely NOT good ! I had some complaints already that i couldn't be reached, I did not realise it's the device !! It works fine after a reset but it happend a few times already, without notice. This is something that really bothers me. Any ideas?
too many active processes
the device, as configured, has too many running processes.
Microsoft had the wisdom to limit the PPC to 32 processes.
After that, it removes some of them... which can crash the system.
You should remove some of the \window\startup applications,
most likely the sim manager, backpack, and the xflashman.exe
apps which auto-backup the contacts/appointments.
this was discussed on ppcw.net ... and has certainly cleared most of my problems.
I still see the phone not receieving a call while GPRS is active,
e.g. when it checks for my email while someone tries to call.
Anyone else can confirm this?
1. connect to GPRS
1. start IE for a large page via GRPS
2. call yourself from a land line while IE is loading

Problem with backing-up

I have just started backing up via Activesync, and set it as an automatic back-up to occur each time i synchronise my data. It worked OK the first few times, and was quite quick, whizzing through more or less as quickly as synchronisation.
However, I changed some of my USB connections around (thus I unplugged my cradle) and now the sycnchronisation works just as quickly, but the automatic back-up seems to get 'stuck'. I watch the little bars, and it goes quite quickly and then gets stuck (on backing up deleted items - it always seems to happen in the same place). It goes so slowly that I just have to give up. It won't Cancel or close with the X box so I have to unplug the Sync cable to stop it.
I wanted to disable the automatic back-up in Active-Sync, but it isn't possible to select it (it is just grey, in the background). So now I'm stuck with it, and as it is now hard to synchronise my data I tend not to do it as often, which is more of a worry than having my applications not backed up.
Has anybody any idea what I can do to fix it?
Thanks
Cathy

My Qtek 2020 is behaving very wierd

My 2020 is soon to be 2 weeks old, and has been placed as a DOA.
Still, there is som problems that I would like to know about before getting the new one.
I've tried to search, but I'm going to admit that my english isn't that good.
Problems with the device;
Active Sync pops up when sending MMS. Eror message "Communication Error"
This also came when I tried to sync it with mye Acer Travelmate.
When calling out, there sometimes starts to blink blue on the left side of the 2020. I know that it shows Bluetooth on. The only problem is that I've never turned it on.
When sending sms, it somtimes comes with the Dialer screen and following messages
"unsupported pin"
"unsupported sim-status"
The return button (on the screen) sometimes stops working
When using the expansion pack I experience that the Device slows down (too much)
There is no respons at all and after som minutes it's impossible to use.
update: is it supposed to use almost 30 minutes or more to backup 30MB to a CF card?
Device slows down and dosen't respond, hangs and almost goes to a complete stop before starting to work again. This can happen just like that.
There is no innstalled programs running, it starts when Active Sync is running in the background.
and there is 125MB free with memory.

Glitching

So I've had this happen quite a few times on my Wing.
The phone has nothing in the outbox, and tries to continuously connect to MMS services and never stops. I found one fix for this, and that is to turn the phone OFF and back on. Well I did this this time, and it did it again.
Other glitch:
I all of a sudden had a message in my outbox that I could not delete, and the phone kept resending. Ultimately leading to me hard resetting the phone.
What the heck? Any ideas?
i have had both problems, here is what i did
for the first issue:
1) let it stay connected for about 10 minutes, make sure you aren't receiving an MMS.
2) make sure your HTC Home Weather is set to update MANUALLY
3) make sure you don't have palringo or other internet usage programs set to run on startup
for the second
1) hard reset
haha, yeah, that's the only solution i found for the second one.

Hayalp! USB fails connect on boot, but OK in bootloader

With my x7501 I can connect in bootloader. Just flashed factory ROM, the Michy's 6.1 clean. In both ROMs I get the "failed to connect" sound from my PC in the fisrt boot screen, just when the red text disappears (and of course, then, nothing happens reagrding the connection). I can connect my wizard and sync.
Lately:
I installed Shantz Today Changer, uninstalled a dumb Minsweeper game (my four-year-old loves the OEM version). I've been having some PC issues, like dropping wifi every few minutes, Google Chrome crashed the OS so I uninstalled, and Quicklaunch icons show up funny occaisionally. My BT also isn't working, (Broadcom stack) software can't find the local device.
So whatever happened to "cable is stable"? Anyone up for a puzzle and kind enough to give me a clue?
Next steps: restore from Sprite Backup and keep popping out my card to exchange files (sneaker mail, anyone?). I'll probably live without Desktop Outlook until I get this solved, since I started using Flexmail and Pocket Informant, I can pretty much do what I need to do on the handheld and have to take it with me, but what a hassle (yes, I'm spoiled). I will try another PC, too.
Working for now
I waited overnight, let it reboot twice as per my nightly routine, this morning unchecked "Enable advanced network functionality" under USB-to-PC in the system tab of Settings. I have a funny feeling that anything I did didn't make a difference, since it all happened so early in the ROM loading process.
I hope the thread helps someone who runs into the same problem.
I am so tired of all the WTF moments in WM. I guess, no matter what, if you want it all, you have to fight for it and deal with the setbacks.

Categories

Resources