Database Users

Repair a Hermes

All,
I'm looking for a company which is able to clean and repair my HERM300 device.
It got wet and now when I want to charge it the led turns red.....
When I leave my device on a warm radiator it works and I can use the device...
But it seems to fail when it gets colder....
Any suggestions?
Cheers and thanks,
Hellejoep

hellejoep said:
All,
I'm looking for a company which is able to clean and repair my HERM300 device.
It got wet and now when I want to charge it the led turns red.....
When I leave my device on a warm radiator it works and I can use the device...
But it seems to fail when it gets colder....
Any suggestions?
Cheers and thanks,
Hellejoep
Click to expand...
Click to collapse
Can you say a bit more on "fail when it gets colder...."
I ask because soon maybe tonight I'm going to make a post on the charging and Red light problem but I'm just wondering exactly what you mean by "fail"
Cheers
Mike

mikechannon said:
Can you say a bit more on "fail when it gets colder...."
I ask because soon maybe tonight I'm going to make a post on the charging and Red light problem but I'm just wondering exactly what you mean by "fail"
Cheers
Mike
Click to expand...
Click to collapse
It blacks out as soon as I connect it to my activesync via USB....
Is it a short circuit?
Or something else?
Cheers,
Hellejoep

mikechannon said:
Can you say a bit more on "fail when it gets colder...."
I ask because soon maybe tonight I'm going to make a post on the charging and Red light problem but I'm just wondering exactly what you mean by "fail"
Cheers
Mike
Click to expand...
Click to collapse
I would like to add something, may be you already know, to red led knowledge. I have a car charger (just plain chinese USB charger with usb cable) When I connect my HERMES I could have 3 conditions: orange (charging) Nothing (not charging) or RED (?). If I soft reset, with charger connected, I ALWAYS have orange, after Windows Mobile screen, But if I disconnect and reconect I have ALWAYS No Light

connecting hermes to charger without battery also enables red light.

Charging Problems - Red Light of Death (RLOD)
Battery Charging Problems, in particular the RLOD so called because the phone refuses to charge and the red LED shows, indicating that the battery is NOT charging.
Background
Problems with charging are not HTC or Windows Mobile specific. Similar if not identical problems are reported across many models and platforms. The issues centre around the state of charge of the battery and the interpretive circuitry in the device and charger. Typically a device will show a Red light rather than an Amber charging light. (NB: RED LED always shows when battery is absent or fails to charge). see also http://forum.xda-developers.com/showpost.php?p=1076879&postcount=28
Getting the battery to start charging once this light is shown is not always straightforward and is as unpredictable and temperamental as priming a water pump (those that have done this will know what is meant). In other words, and to put it crudely, you need to kick start the system. Unfortunately those that have managed to do this have usually tried lots of things before it starts working again. This makes it hard to be absolutely certain about the solution other than perhaps the last 4 or 5 actions taken.
Those that have managed to recommence charging have not reported that the problem recurs on a frequent basis. (possible exception of in-car charging issue). This issue requires patience and time, (time maybe critical, it is possible the issue would resolve itself perhaps as charges dissipate within battery and circuitry involved). However the following points seem probable solutions and were thought to work by some who resolved the problem.
Failure to Charge (Red LED Lit when charger connected)
Causes of this problem are unclear, but in practical terms events leading up to this issue have included:
1
Leaving the phone on charge overnight (possibly but not necessarily with certain programmes or connections running) It seems a fault occurs in the charging system, which causes the battery charge to drain rather than increase. Resulting battery charge is very low. (Another Blog will be added concerning an Active Sync issue which can cause the battery to drain over-night through repeated connection attempts)
2
Through heavy use or not re-charging often enough so that the battery is permitted to reach a sub 10% charge (not precisely known but likely to be very low)
Possible Solutions:
A
1.) Remove battery
2.) Connect the phone to the charger or USB
3.) Insert the battery while connected to charger
4.) Red light should turn Amber
5.) Soft Reset
If this does not work immediately it is suggested that the battery be removed from the phone for around 1 hour and the above steps repeated.
OR
B
It has been found with some phones charging can be re-started by:
1 ) Remove battery
2 ) Connect charger (Optional. I would try this potential solution without the charger connected the first time I try this. If it fails to work then I would repeat the steps with the charger connected)
3 ) Holding the battery, line it up wiith the phone's battery contacts.
4 ) Move the battery rapidly on and off the contacts
6 ) Repeat the above until the Amber charging light comes on. So after perhaps connecting/disconnecting 20 times, insert the battery properly and give it a few seconds to see if the LED turns Amber.
7.) Soft Reset
NB: I have seen two reports where those attempting this report a fairly loud "pop" sound following which the phone began to charge. However in one case the person reported that they then had subsequent problems of signal reception on the phone and thought the popping sound may have been related to this.
OR
C
If your problems remain after trying this a few times you could always try the following to manually charge the battery a little (enough to let the phone charger circuit detect the battery is present when you put it back in)
1) Remove the battery from the phone!
2) Take 3 fresh AAA batteries in series (total 3 x 1.5V = 4.5V)
3) Connected the (+) wire to (+) on the battery
4) Connected the (-) wire to (-) on the battery
5) Hold this in place for 60 seconds.(possibly longer you are trying to charge it enough for charging circuitry to recognise there is a battery installed.
6) Put the battery in your phone
7) Switch on phone and start charging (via USB)
Hopefully you will get the Amber charging light.It may be worth repeating this a few times if not successful on the first try.
The electrical contacts are all important, poor contacts will render this a worthless exercise.
I leave it to you to decide how you connect the wires. If you have no other means you could enlist the help of someone to hold the batteries and wires together while you connect to the phone battery! Warning - Do not connect a mains based transformer to the battery with an incorrect charge rate (mAh) and voltage (V). Any attempt to force charge using mains transformers could be extremely hazardous (explosive). Only a qualified/competent person should attempt to charge the battery in this way. Similarly, even if you are using batteries to do this task, do not leave them connected for more than a few minutes and stop immediately if either set of batteries become warm.If the problem persists:The final resort - a new battery.
Mike
╤

Very good article Mike, I linked it on the Hermes problems wiki page

i just want to add my 2 cents to this, there was an earlier post on here that mentioned the car charger deal where it wont charge unless you turn the phone off, plug it in, then turn the phone.. right now i am on my 2nd 8525 and it has done this, but its not only the car charger (cheap belkin car charger) but it sometimes does this with usb cradle i got from ebay, i have opened the cradle and there isnt anything different, its a straight usb connection, hmm except now that i think about it there is a blue LED, but it shouldnt be drawing enough current to cause this. Also i have a motorola charger in my office that i used with my wizard (i believe output is slightly different, if i remember correctly its a .5 amp where as the HTC charger is 1 amp) but it also behaves in the same manner... the only 2 methods that work constantly and consistantly of plugging in without turning off is either the factory charger, or a regular usb cable on the pc..
just seems weird since all of these problematic situations worked fine on the wizard and i believe they both have the power requirements...
let me toss another idea in the fire here on this, something that just occured to me... i wonder if this somehow could be related to the factory installed driver for this. what made me think of this is how the battery meter only goes by 10%.. could this funky driver be the source of the problem?

shogunmark said:
right now i am on my 2nd 8525 and it has done this, but its not only the car charger (cheap belkin car charger) but it sometimes does this with usb cradle i got from ebay
Click to expand...
Click to collapse
If your cradle is not connected to your PC, or if your PC is off while you see the behaviour you described, then the likely reason is that pin 4 of the Mini USB connector isn't grounded on both your car charger and cradle. See here for more details.
Cheers
Daniel

pof said:
Very good article Mike, I linked it on the Hermes problems wiki page
Click to expand...
Click to collapse
Cheers pof.
Some of the type sizes are a bit strange (but readable!) serves me right for copying and pasting from Word formatting!
Tadzio's link is good/informative and I edited in a link to it in my post - though it's on this page anyway.
Mike

tadzio said:
If your cradle is not connected to your PC, or if your PC is off while you see the behaviour you described, then the likely reason is that pin 4 of the Mini USB connector isn't grounded on both your car charger and cradle. See here for more details.
Cheers
Daniel
Click to expand...
Click to collapse
cradle is connected to pc at all times, and i will deal with the car charger for now cause my HTC one should be arriving any week now, but thanks for the tip!

8525 (hermes) Charging may be voltage sensitive
I have noticed with my new 8525 (USA Cingular model of phone) that it came with a 5.5V charger. Whenever I connect to a 5.0 V USB source charging the phone is very "iffy". Given that the standard for USB is 5.0 V (4.75 - 5.25) there is a problem with the design. My question for the HTC crowd is can this be fixed via a ROM change or are we stuck with a bad design?

hellejoep said:
All,
I'm looking for a company which is able to clean and repair my HERM300 device.
It got wet and now when I want to charge it the led turns red.....
When I leave my device on a warm radiator it works and I can use the device...
But it seems to fail when it gets colder....
Any suggestions?
Cheers and thanks,
Hellejoep
Click to expand...
Click to collapse
http://www.america.htc.com/support/service-repairs.html
Since you got it wet, it is most likely not covered by the warranty, these and the numbers for out of warranty repair if you live in the U.S. I know that for cingular, you have to ship it to them yourself, and they will charge you a $28 diagnostic fee, before telling you how much is costs to fix the problem (if they even can)

heh here almost the same, providers are charging ~$29.5 USD as diagnostic fee but they are more polite, they first tell estimated costs, and only ask for the sum if you (usually) don't order the repair but need back your phone
Hellejoep:
if you are willing to send it abroad (inside EU) and you are either not need "overnight return" or such nonsense or cover the extra costs such operations really need, you may contact me. no diagnostics fee or anything such (though you will have a small loss.
about the charging problem:
the same issue occurs also in Wizard/Prophet, and Charmer (compactII) as well. though not in Magician, even so that they share the exactly same battery.
I believe it must have something to do with the charging controller. I don't have a disassembled unit at home with me now, but I suppose it should be a crap companion chip from Texas, to be interfaced with the ever-worst TI OMAP platform
(sorry, no hard feelings, pals, but someone using such one as an actual everyday phone must have some sorta mental problem )

strange battery issue
Hi all,
I've a similar issue with any charger.
It happened first with car charger (one cradle with an usb output): sometimes it charged, most of all it charged only when power was off.
Now I cannot charge with any method. (those described here: battery charging problems)
Usb cable (it's not original), original power supply, even with the y cable.
When i try to charge, it drain battery (i tried with a new one) and amber led blinks slowly instead to be firmly light.
There's anything I can do?
It's a SPV M3100 buyed two months ago on ebay.
I tried also with two roms WM6 official release ITA ver and Schap's 3.54b ITA ROM WM6
radio 1.48
Any suggestions?

Herm200/tytn problems
hi to all,
i read most of your post on possible problems with this PDA (HERM200/HTC TYTN).
i'll try to spent some few words to explain the story around my pda.
i live in italy and i bought the TYTN on december 2006 and for 6 months with his software problems i used it day by day in my business activity, untill one day, it falled down the ground from my and with all the leather cover (bundled with the pda, an hard black belt cover); then i took it and picked up a telephone number from my addres book and then putted it in charge for all the night; when, late in the morning, i took it, i noted that there was still the red light of the battery indicator and then PDA didn't turned on.
i tried to make soft/hard reset but nothing.
I carried to the italian warranty service of HTC and after 7 days they deliver to me the PDA in the same state that i carried; on the technical report there was: pcb damaged, battery connector pinouts damaged, pda not Repairable - out of warranty.
i thought: "i have had a lot of care for this PDA that still look like as new one"
and now i have a 700€ of unusefull PDA.
Last day i finally decided to open my PDA to find broken pieces and more.... but nothing.... i observed really well: NOTHING of wrong.
Now i will to know if somebody of you, can suggest me something to revive my PDA or suggest me any service center (affidable) in europe (not like the italian one) where to send it for maintenance: I DONT WANT TO THROW OUT MY PDA!
Thank you in advance for your attention and patience.
ps: sorry for my english, i hope it will be comprehensive.

therock-htc said:
Now i will to know if somebody of you, can suggest me something to revive my PDA or suggest me any service center (affidable) in europe (not like the italian one) where to send it for maintenance: I DONT WANT TO THROW OUT MY PDA!
Click to expand...
Click to collapse
If I understood you correctly, your TyTN still works - it just cannot charge the battery, right?
Then, probably one of the cheapest (although not perfect) solutions is to get a cradle that can charge a battery outside the TyTN (like this one on eBay). You will have to power down your TyTN, remove the battery and put it in the cradle every other night or so, so it's not very convenient. But it's cheap. Maybe you'll want to keep this as "plan B" in your mind while you look for a more perfect solution.
Cheers
tadzio

elehcimo said:
Hi all,
I've a similar issue with any charger.
It happened first with car charger (one cradle with an usb output): sometimes it charged, most of all it charged only when power was off.
Now I cannot charge with any method. (those described here: battery charging problems)
Usb cable (it's not original), original power supply, even with the y cable.
When i try to charge, it drain battery (i tried with a new one) and amber led blinks slowly instead to be firmly light.
There's anything I can do?
It's a SPV M3100 buyed two months ago on ebay.
I tried also with two roms WM6 official release ITA ver and Schap's 3.54b ITA ROM WM6
radio 1.48
Any suggestions?
Click to expand...
Click to collapse
Hello!
I had also a battery charging problems with my MDA Vario II (TyTN; Hermes; HERM300):
1. Charging from the AC mains supply with the original miniUSB 5V charger: no problems.
2. Charging in the car with the non-original car lighter miniUSB 5V charger: it was charged only when the phone was OFF; no charging when the phone was ON.
3. Charging with the USB-miniUSB 5V cable connected to the notebook: it is charging only when the phone is OFF; no charging when the phone is ON.
So I asked myself: what is the difference between all these three cases? They are all miniUSB 5V power sources... And I found out an answer: It should be a matter of the USB current amperage.
Original AC miniUSB 5V charger delivered with the phone is 5V/ 1A. When I have bought the car 5V miniUSB charger with the 1A (one amper) amperage - there is no problem with car battery charging anymore... ;-) The phone is charged either way: ON or OFF.
But is it possible to charge the battery correctly from the notebook? I think not, because I have no influence on the current value from the 5V notebook USB.
Previously I had MDA Vario (Wizard): in this phone there were no battery charging problems... I wonder why the are some with the Hermes...
Take care,
Przemo

Przemo_55 said:
And I found out an answer: It should be a matter of the USB current amperage.
Click to expand...
Click to collapse
This is not correct. The problem is well understood and has been discussed several times.
The key is that your device tries to sense what it is connected to:
- if there is USB data traffic, it concludes that it is connected to a computer. It will then negotiate the current (power) it can draw from the USB port with that computer.
- otherwise, your device checks if pin 4 of the connector is pulled to ground. If yes, it concludes that is is connected to a dedicated USB charger, and starts charging, consuming as much power as it needs. This mechanism seems to work only if the device is on - and sometimes not even then (bug?). I guess the mechanism is implemented in software, so it can't function when it is off.
- otherwise, it doesn't know what it's connected to. Could be a computer in stand-by that didn't power off its USB ports or something. Your device concludes it may be unwise to start charging (could, for example, drain the other device's battery).
The cheap after-market chargers do not connect pin 4 to ground (pin 5), so your device doesn't charge. If you are really good with a soldering iron, try connecting pins 4 and 5 of the charger's USB connector, and you'll see that your device will start charging with it.
Cheers
tadzio

tadzio said:
If I understood you correctly, your TyTN still works - it just cannot charge the battery, right?
Then, probably one of the cheapest (although not perfect) solutions is to get a cradle that can charge a battery outside the TyTN (like this one on eBay). You will have to power down your TyTN, remove the battery and put it in the cradle every other night or so, so it's not very convenient. But it's cheap. Maybe you'll want to keep this as "plan B" in your mind while you look for a more perfect solution.
Cheers
tadzio
Click to expand...
Click to collapse
Thank youu Tadzio,
but my PDA is DEAD !
I still don't try to charge the battery separetly.
The reason is that when i carried the PDA to service i leaved the PDA and Battery: i dont wanto to believe that service dont check the battery !??!?
However , i will try to charge the battery separetly and then i will know you the outcome.
Thanx and Cheers
Therock-htc

Internal battery is very low!!! Need Help

Hi,
My wizard main battery (wiza16) was very low and the wizard stop with a message “The internal battery is very low”. After coming back home I have tried to charge but it is not taking charge and didn’t turn on anymore. I recently bought a new battery (wiza16, 3.7 VDC, 1250 mAH) thinking that it will work again but still the same problem, wizard is not taking charge or turn on.
Can anyone help me?? What can I do to start my wizard? Do I need to change the tiny little battery (which is inside the wizard)? Kindly help me.

Wizard service manual
Hi,
See if when you connect the power plug the led turns red, if yes....
If Charge light is red when plug in AC adapter, it means the main battery is not charge enough and can’t power on,
You just need to continue charge unit the light become Amber
If not, i think you have a problem.
Check if charger its working and if its pluged.
If it helps --- ftp://ftp.xda-developers.com/Wizard/Docs_Tutorials/Wizard_Service_Manual.pdf

Wizard Battery discharge completely
Hi,
Thanks for quick reply. there is no light when i connect my wizard with PC. I don't have the AC charger, I have lost that for long and was using my PC usb to charge. trying to get one AC charger.
There was no problem with my wizard, just can't turn on after it's battery discharge completely. Even the new battery couldn't turn that on.

You'll need the original charger if the battery has complelty discharged as it will only charge from the computer if the phone is powered on.
This happened to me before.
There is a trick to giving the battery a quick charge which will give it enough juice to boot the phone up and allow it to charge from usb. its not recommended but works.
You will need a spare usb cable, cut one end of, strip the wires back and connect the red wire to + and the black to - on the battery, only do it for a short period, about 30 seconds while conneted to your computer.
You may need to give it a few 30 second bursts to give it enough juice.
Pop the battery back into the phone and switch it on while pugged into the PC
Took me a few attempts to get enough charge in the battery for it to boot up.

Wizard battery
You can also use a 9V battery to jumpstart your battery. But then you have to be more careful. I connected the 9v battery to my Wizard battery for about 15 seconds, then tried to start up my device. If not successful I started again with 15 seconds jumpstart..
But you can find more information here in the forum: just search for jumpstart or something similar....
Regards
huibuh_!

Wizard Battery discharge completely
Thank you all for information. 9V battery method didn't work for me. Looking for AC charger online and get a link (http://www2.dustin.se/pd_5010073700.aspx). Do you think this is the right one? If yes, then I can order.

yea that's the right one but if you have a friend with a ppc or maybe a razor you can use there charger most ac adapters are starting to use mini usb just a way of saving some money even though having an ac adapter is good
could also try and get one of those usb plugs that you can plug up to a wall and plug in a usb cable into the slot
but don't take my word for this wit hmy wizard i haven't had it shut all the way day
if anybody can verify this would work

AC charger not also working
I have got the AC charger yesterday. When Connect the Ac charger first time the red light on my wizard showed for just half second then dissappear. Still let that connected for whole night but no response.
Thank you all for help.

@Keland44, most Razr chargers dont work, they MUST be at least 850mA in order for the Wizard's battery to receive anything. The older Razr chargers are sometimes as low as 350mA, but the never ones are as high as 1.2A, so you need to read the label on the charger itself to be sure.

ashasaur said:
@Keland44, most Razr chargers dont work, they MUST be at least 850mA in order for the Wizard's battery to receive anything. The older Razr chargers are sometimes as low as 350mA, but the never ones are as high as 1.2A, so you need to read the label on the charger itself to be sure.
Click to expand...
Click to collapse
Yup that is about right,
If the battery is complelty dead, then you need to original charger.
If you have got the right charger and you get a red light and it goes off. your phone might have a problem.
This happened to my last wizard after stupidly trying to dry out the screen after getting it wet which stopped the touchscreen working (i was drying it out while the phone was still on) well my wizard crashed.
Took ages to get it back on but it was very unreliable then one day, it wouldnt go on and charger done nothing. Unpluging and pluging the charger in several times got a red light on.
Sometimes i could get it to turn on, the charger would charge for about 5 minutes then the phone would die soon after.
Your phone might possibly be bricked.

Help :
I Have Same Problem with my wizard
Yesterday my wizard goes died, i think the battery out
when i came home, i use AC Charger for HTC Universal, for 1st time its red light then off,
after 15 minutes orange light, i try to turn on my wizard and works but only in boot loader 5 minutes again its going off again
until now my wizard wont turn on
some body help

HD2 Died - Power Problem

Thats right.. last night i left my Leo charging, today when i woke up i noticed that the battery level was very low so.. i unplugged it and plugged it again, noticed that the orange led wasnt lighting up, neither was the phone charging.
The phone gets very very very hot when plugged to charger or USB port on my computer and does not charge at all.
Tried it all, left it all day long with the battery out of the phone, tried charging without it in.. and nothing..it just gets very hot where the connectors (pins) make contact with the battery.
Now im trying to charge the battery on a cradle to flash it with stock rom and SPL to get it to warranty..
Any of you guys has any thoughts?

I see i posted in the wrong section.
Thank u mod

Do you always charge via usb into pc? Is your cradle plugged into the wall or pc? I don't know if you have done this, probably so, but check in windows settings->system->Power and inside the battery tab see if the "When phone is on, do not charge the battery when connected to a PC" is checked.

Sean3 said:
Do you always charge via usb into pc? Is your cradle plugged into the wall or pc? I don't know if you have done this, probably so, but check in windows settings->system->Power and inside the battery tab see if the "When phone is on, do not charge the battery when connected to a PC."
Click to expand...
Click to collapse
Yeah.. it crossed my mind to check for it, and that option is unchecked.
Though the charging "orange" led doesnt turn on even if the phone is off.
I usually charge it via usb->pc, allthough i tested with the wall charger and nothing.
I suspect it must have been a power surge that burnt in some way the PBC of the "charging module..thing"
Thanks for the suggestion

i'd check that none of the pins for the battery are in contact with each other if there is heat in that area.

Ok, I'm assuming then that the phone works, but just has low battery at the moment. If that's the case then it doesn't appear to be the battery or the leads. Any chance it's the cable? That of course assumes your using the same one with the cradle. I ask because my device didn't come with a wall charger, just a usb cable so I had to get a few extra plus a wall plug-in with a usb port.

Jack E said:
i'd check that none of the pins for the battery are in contact with each other if there is heat in that area.
Click to expand...
Click to collapse
Yep already checked it..although if it was something wrong with the pins the phone wouldnt turn on.. i dunno

Sean3 said:
Ok, I'm assuming then that the phone works, but just has low battery at the moment. If that's the case then it doesn't appear to be the battery or the leads. Any chance it's the cable? That of course assumes your using the same one with the cradle. I ask because my device didn't come with a wall charger, just a usb cable so I had to get a few extra plus a wall plug-in with a usb port.
Click to expand...
Click to collapse
I have a car charger also.. and nothing.
Your leo didnt came with a wall charger?

BillReed said:
I have a car charger also.. and nothing.
Your leo didnt came with a wall charger?
Click to expand...
Click to collapse
Weird, but unfortunately it didn't. I think being in the US and getting the device from Telstra in Australia may be why I didn't. Well, if it is a hardware problem and you can't get it to charge from the device, I believe you can get a cradle that will allow you to charge the battery independant of the phone. I know it's not the best option on the planet, but it would get your battery where it needs to be to flash and confirm whether or not it's a charging issue with the battery itself.
Come to think of it, this did happen to me several weeks ago. I plugged the phone in before bed as usual and noticed the charging light didn't go on and the battery drained overnight from about 60% to 15%, which it shouldn't have done. Not in standby at least. Soft-reset the next day fixed it. It hasn't done it since. I was installing a bunch of things that evening, which may have been what did it.

I had a same problem with my hd2 and by some miracle and few days of pain
it workd again...and it workd about 5 days and same thing happend al over again...and I think I have solution!
It may be stupid but it work for me...
try to connect your hd2 to charger but without battery and then insert the battery and it should start up your phone and charging...
I apologizes for my poor english

mikelebrat said:
I had a same problem with my hd2 and by some miracle and few days of pain
it workd again...and it workd about 5 days and same thing happend al over again...and I think I have solution!
It may be stupid but it work for me...
try to connect your hd2 to charger but without battery and then insert the battery and it should start up your phone and charging...
I apologizes for my poor english
Click to expand...
Click to collapse
I'll try that when i arrive home..

HTC HD2 charging problem

i am new to all this windows mobile thing .. bought a used hand HTC HD2...
thing is i tried to connect HD2 with charger but there was no charging sign on mobile screen... after that i tried to connect it with my USB and cell phone starts charging...
turned off my cell phone.. reboot again and now when i try to charge my cell phone through USB wire nothing happens.. Windows Mobile Device Center shows that my cell phone is connected with my PC but there is no charing sing on my cell phone.

I have a extremely basic idea of what you're trying to say. So you tried to hook it up to a wall charger, but it didn't charge. Then you hooked it up with a USB cord and it started charging? Now it wont charge through USB at all? Sounds like the USB port on the phone is busted.

jdwrrzmm said:
I have a extremely basic idea of what you're trying to say. So you tried to hook it up to a wall charger, but it didn't charge. Then you hooked it up with a USB cord and it started charging? Now it wont charge through USB at all?
Click to expand...
Click to collapse
thats right.... but if USB port is broke then why Windows Mobile Device Center shows that is connected with my PC :S

Sounds like a faulty USB port on the phone if a wall charger wont even charge it.
Just to be sure, go to the settings tab in Sense, click on About Phone, then Battery, and make sure that checkbox that says 'When phone is on, do not charge the battery . . ." and make sure it's unchecked.

already unchecked that option. if USB port is faulty why WMDC showing it is connected with PC?

Only the power part, and not data, is dead?

I would take out the battery & check the pins that make contact between the phone & battery incase they're damaged or bent.
Also could be a faulty battery or loose connection on port?

rgrover said:
I would take out the battery & check the pins that make contact between the phone & battery incase they're damaged or bent.
Also could be a faulty battery or loose connection on port?
Click to expand...
Click to collapse
i was thinking the same thing had it happen to me before. the middle pin was bent up a little i just bent it back and all was well from there.

last night i left the phone... now in morning i just changed the Sim and connected again and now its charging...
I am confused because i cant pin point the exact problem...
rgrover said:
I would take out the battery & check the pins that make contact between the phone & battery incase they're damaged or bent.
Also could be a faulty battery or loose connection on port?
Click to expand...
Click to collapse
will check it out..

all these problems i am facing is it because of rom
Hardware:
QualCOMM(R) 8250B
Speed 1024MHz
RAM 448MB
Flash Size 512MB
Software information:
OS version 5.2.21864 ( 21864.5.0.81 )
Manila version 2.5.19202525.0
Rom version1.43.110.2 ( 70315 ) WWE
ROM Date 10/28/09
Radio version 2.04.50.22_2

The HD" doesn't actually show a large battery charging animation across it's screen when it's charging - instead you just get a light illuminated on the earpiece speaker so it's not that obvious that it is charging compared to other devices.

HTC HD2 Leo Charging Problem
If youre having charging problems then my best advice is to remove the sim card and charge it.
It works that way for some reason. I tried everything from trying different chargers and different usb ports. I tried plugging it in to a computer but nothinig seemed to work. So i removed the sim card for no reason and plugged it in and booom It worked!
Hope This Helps​-Drian

htc hd2 charging problem
strangely enough,removing the sim card actually allows the phone to be charged....weired
thankss

some slight oxidation (not visually detectable)
For those people where the phone charges without SIM Card:
Since SIM Card is so close to battery, could it be that the contacts of the battery are not making good contact?
It looks like fumbling around with battery helps with your problem.
Have you tried charging with SIM Card and just fumble with battery?
Looks like you are suffering from poor contact between phone and battery. Perhaps some oxidation?
Another solution/test:
Take soft normal pencil (no colouring pencil, B, 2B or softer) try colouring contacts of phone and battery with pencil taking care to "stay within the lines"
This does two things: leave a residue of carbon, which favors making contact and scours slightly removing slight oxidation and or grease, removing that favors contact too.

Similar Problem
I have the same symptoms BUT the device charges under Windows Mobile and NOT Android. I have had the android os crash last night when I didn't know that it wasn't charging and just now it was at 40% and I had it plugged in and did a battery pull to find it dead. Looks like Desire v5 isn't allowing it to charge through USB. Very disappointing situation.

Thank you guys
I woke up this am to a dead phoen that owuldnt charge unless phone was off a quick search and this thread sorted.. I love this website..

To me it all sounds like a bad contact in the micro USB on the phone. I have personally a problem with this and I found this by moving the plug slightly during sync as it cancellers the sync and restarts it.
Now for another problem I have in this direction; I always charge my phone from USB and this gives me no problem, but every now and then (1 in about 10 charges) the phone is locked after disconnecting from power or it switches on OK but after that does not recocnize my password and the only way to get “in” is a hard reset (battery out). Is there anyone had a similar experience or knows a solution.

THanks guys i was thinking i may need to pay money for fixing but it works fine because of your help

Hi all,
After flashing the ROM v.3 Hyper-CM7 XMAREX my Leo does not charge the battery more.
The LED lights up, but the battery will not charge.
I tried the original ROM, but Windows is almost the same thing.
The LED lights alternately red and green but the battery does not charge.
Any advice?
Thank in advance.

Hi guys, i also have a problem with my HD2.
My USB port is broken and i brought it to several shops to fix it but they couldn't fix it.
How can i fix it myself? (And by myself i mean my own dad)

X10i not turning on / charging

Hi guys,
Suddenly facing a strange problem since last night.
My x10i was running out of charge & i connected to the comp to charge while i was working. I noticed the charging speed was extremely low, so i restarted the phone to see if it would help. Did not.
Thought there is some problem with the cable, used a different cable as well, but no use.
The slow charging had stopped and eventually the phone died.
Tried connecting to the socket & charging, still no use.
The red led blinks when i connect the phone to a charger via the usb or the socket.
needless to say the phone does not even boot up now, obviously for no charge...
any ideas wat maybe wrong or wat i could do ?
please advice

Have you tried to let it charge for some time in off mode? As long as your battery is not dead, and the phone get the right voltage through the USB connector it should charge in an "emergency mode". This is a slow way of charging, but allows for charging without any electronic circuits to monitor it, it is not the same as the charging screen that usually displays when you connect the phone while it is powered off. Usually when a phone is completely discharged it needs to be connected at least 15 min, sometimes a lot longer, before the electronics kicks in, and starts the speedcharging.
My best advise would be to connect it to the mains charger, or a USB port you KNOW supplies power. Some laptops cut down on the powersupply to the USB ports when they run on battery. Let it be connected for a long time (several hours), and then try to power it on again.
If that does not help three things can be wrong
1. Somewhere the USB connection is broken, either in the cable or in the connector on your phone (or on the PC's connector, but that is less likely).
2. The battery is dead, modern batteries contain circuits that actually disables the battery when any given parameters gets outside the defined limits. This is to prevent the battery catching fire. On some batteries this renders the battery useless, and you need a new battery.
3.) The mainboard of your phone is dead, and hence nothing works, can be ruled out if you can borrow a battery from someone to test if your phone works then.
I hope a good and long charge can sort out your problem, that is the easiest fix, and it is free.

Hi O_K,
well, i have been charging (or trying to) the phone since it died last night.
i have used different chargers & different modes of charge (through the system & the wall socket) - no joy at all.
the LED blinks red a couple of times when connected.
Very occasionally, the SONY ERICSSON logo (startup) shows on the screen & it switches off again, back to the blinking.
So charging for a long time & through different chargers has not helped.
gonna try a different battery now to see if that can help.
Thanks for your response!

well, tried switching chargers & batteries.
The problem seems to be with the charging unit on the phone (USB)
with any charger or battery, wen connected the led blinks (like wen the phone is charging), but there is no charge happening.
eventually the phone dies, even if charging
any ideas?

There is a thread some where in this forum for fixing the same problem you have...I don't remember the exact name of the thread..if I find it I'll post the link here..Anyways what the guy did was
-Pull the battery out and connect the charger till the led turns green.
-put in the battery now and charge the phone...
and I think that was it.
Hope it helped..
EDIT: Found the link.
http://forum.xda-developers.com/showthread.php?t=944322