Hi,
My wizard main battery (wiza16) was very low and the wizard stop with a message “The internal battery is very low”. After coming back home I have tried to charge but it is not taking charge and didn’t turn on anymore. I recently bought a new battery (wiza16, 3.7 VDC, 1250 mAH) thinking that it will work again but still the same problem, wizard is not taking charge or turn on.
Can anyone help me?? What can I do to start my wizard? Do I need to change the tiny little battery (which is inside the wizard)? Kindly help me.
Wizard service manual
Hi,
See if when you connect the power plug the led turns red, if yes....
If Charge light is red when plug in AC adapter, it means the main battery is not charge enough and can’t power on,
You just need to continue charge unit the light become Amber
If not, i think you have a problem.
Check if charger its working and if its pluged.
If it helps --- ftp://ftp.xda-developers.com/Wizard/Docs_Tutorials/Wizard_Service_Manual.pdf
Wizard Battery discharge completely
Hi,
Thanks for quick reply. there is no light when i connect my wizard with PC. I don't have the AC charger, I have lost that for long and was using my PC usb to charge. trying to get one AC charger.
There was no problem with my wizard, just can't turn on after it's battery discharge completely. Even the new battery couldn't turn that on.
You'll need the original charger if the battery has complelty discharged as it will only charge from the computer if the phone is powered on.
This happened to me before.
There is a trick to giving the battery a quick charge which will give it enough juice to boot the phone up and allow it to charge from usb. its not recommended but works.
You will need a spare usb cable, cut one end of, strip the wires back and connect the red wire to + and the black to - on the battery, only do it for a short period, about 30 seconds while conneted to your computer.
You may need to give it a few 30 second bursts to give it enough juice.
Pop the battery back into the phone and switch it on while pugged into the PC
Took me a few attempts to get enough charge in the battery for it to boot up.
Wizard battery
You can also use a 9V battery to jumpstart your battery. But then you have to be more careful. I connected the 9v battery to my Wizard battery for about 15 seconds, then tried to start up my device. If not successful I started again with 15 seconds jumpstart..
But you can find more information here in the forum: just search for jumpstart or something similar....
Regards
huibuh_!
Wizard Battery discharge completely
Thank you all for information. 9V battery method didn't work for me. Looking for AC charger online and get a link (http://www2.dustin.se/pd_5010073700.aspx). Do you think this is the right one? If yes, then I can order.
yea that's the right one but if you have a friend with a ppc or maybe a razor you can use there charger most ac adapters are starting to use mini usb just a way of saving some money even though having an ac adapter is good
could also try and get one of those usb plugs that you can plug up to a wall and plug in a usb cable into the slot
but don't take my word for this wit hmy wizard i haven't had it shut all the way day
if anybody can verify this would work
AC charger not also working
I have got the AC charger yesterday. When Connect the Ac charger first time the red light on my wizard showed for just half second then dissappear. Still let that connected for whole night but no response.
Thank you all for help.
@Keland44, most Razr chargers dont work, they MUST be at least 850mA in order for the Wizard's battery to receive anything. The older Razr chargers are sometimes as low as 350mA, but the never ones are as high as 1.2A, so you need to read the label on the charger itself to be sure.
ashasaur said:
@Keland44, most Razr chargers dont work, they MUST be at least 850mA in order for the Wizard's battery to receive anything. The older Razr chargers are sometimes as low as 350mA, but the never ones are as high as 1.2A, so you need to read the label on the charger itself to be sure.
Click to expand...
Click to collapse
Yup that is about right,
If the battery is complelty dead, then you need to original charger.
If you have got the right charger and you get a red light and it goes off. your phone might have a problem.
This happened to my last wizard after stupidly trying to dry out the screen after getting it wet which stopped the touchscreen working (i was drying it out while the phone was still on) well my wizard crashed.
Took ages to get it back on but it was very unreliable then one day, it wouldnt go on and charger done nothing. Unpluging and pluging the charger in several times got a red light on.
Sometimes i could get it to turn on, the charger would charge for about 5 minutes then the phone would die soon after.
Your phone might possibly be bricked.
Help :
I Have Same Problem with my wizard
Yesterday my wizard goes died, i think the battery out
when i came home, i use AC Charger for HTC Universal, for 1st time its red light then off,
after 15 minutes orange light, i try to turn on my wizard and works but only in boot loader 5 minutes again its going off again
until now my wizard wont turn on
some body help
Related
Hi,
My wizard run out of battery completly yesterday, I brought it home and try to recharge it, but no recharging light will appear.
I left it overnight connected to the mains but to no appeal,
I also removed the battery for a few minutes and then plug again but no luck.
I´m not using the mains provided adaptor but my travelling kit, a proporta mains/usb adaptor and a retractable sync/charge cable with a mini-usb pin cos I´m back home for Xmas and I don´t travel with the mains.
I have read about problems with some chargers from Boxwave, but I have consistently using this charging conbination since October.
Any ideas, should I send it back to expansys to repair, or is there anything else I can try?
Thanks
Elsral
same thing happened to me.. Supposely the phone will not charge from being completely dead without a charger that puts out 1amp. There is another method if you are a little brave... cut up an old car charger and hook it directly to the battery (red cord to + on battery and black to -) Read about it on howardforums and it worked like a champ. I only needed to jump the battery for about 30 seconds before I put it back in the phone and the amber light kicked on.. I was very relieved!!
Same happend to me yesterday. Simply plug the carger in and wait 1 or 2 seconds then switch the power button. After some seconds the carging light should switch on.
The wizard won't charge if it's switched off.
Export800,
you are a megastar,
I put apart a usb adaptor that I had built to charge my gps and I connected cables directly to battery for a minute and Voile,
tnx a million,
elsral
Xunil99 said:
Same happend to me yesterday. Simply plug the carger in and wait 1 or 2 seconds then switch the power button. After some seconds the carging light should switch on.
The wizard won't charge if it's switched off.
Click to expand...
Click to collapse
But if the battery is totally dead surely the unit wont switch on ? Thus its a catch 22 ??? There is no power to switch on and the battery wont charge totally dead.
Ridiculous if you were caught out away from a charger and ended up having to pull apart a usb lead to get things back to life.
If the battery is so low, that the wizard switches off itself, and you connect the charger, it won't charge, because it's switched off.
Use the power of the charger to turn it on, then charging will beginn (and also the device will boot).
Xunil99 said:
If the battery is so low, that the wizard switches off itself, and you connect the charger, it won't charge, because it's switched off.
Use the power of the charger to turn it on, then charging will beginn (and also the device will boot).
Click to expand...
Click to collapse
Can anyone else confirm this works as there have been many people having this problem. Simple solution if it works.
Switch off your device completely (hold the Power Button) and try to charge: Nothing happens. Now switch it on - charging begins.
I have noticed that last week, when battery was very low and i know that i would need my wizard in about half an hour. So i switched it off completely, so that it would charge faster and noticed that.
Yesterday when battery was totally dead i remembered that and i switched it on.
Btw, doesn't it damage the battery, if you connect it to 12 V (!!)??
Xunil99 said:
Switch off your device completely (hold the Power Button) and try to charge: Nothing happens. Now switch it on - charging begins.
I have noticed that last week, when battery was very low and i know that i would need my wizard in about half an hour. So i switched it off completely, so that it would charge faster and noticed that.
Yesterday when battery was totally dead i remembered that and i switched it on.
Btw, doesn't it damage the battery, if you connect it to 12 V (!!)??
Click to expand...
Click to collapse
If I come across the problem will certainly be trying your method before I will be ripping into any usb leads
The same thing happened to me this past weekend. We were out camping and my MDA's (wizard) battery went completely dead. I had a USB sync cable for my laptop, but that would not revive the unit. I'm afraid the only way to bring it back to life is with the original OEM charger which has an output of 1 amp. Thanks for the post!
I had the same issue a while back. At first I thought the moto charger I had was dead but then I plugged in a old SMT5600 and it worked fine.
I left it plugged into my computer for a hour or so and finally I heard the "new usb device blip" from the other room and it started to charge. Guess I was lucky.
Same thing happened with my wifes SMT5600. The battery died and she couldn't get it to charge with her moto mini usb charger. I plugged it into my machine and a hour later the charging light came on.
I have heard that the Wizard will not charge from my laptop using a usb cable if it is completely drain. I find this to be NOT TRUE.
I ran out of juice twice last weekend. The thing about the Wizard is that, if it's completely drained, it will get stuck at the boot screen, and go no further.
Take out the battery to turn it off again. Put the battery back in, and then plug in your charger. DO NOT TURN IT BACK ON. It needs all the power it can get. Give it a minute, and you will see your orange charge light come on. Just leave it alone for several hours, and it will charge. This is my experience.
I got it! But, first the story.
None of the above methods helped me. I tried plugging it in to a big truck lighter, a pickup truck, even an ac adapter for my coleman cooler. Nothing!
However, I had a powered Pro-Clip mount that I had as a backup for the one I use. Guess what? THAT worked!
I think the cable makes the difference. Need to find the specs on those puppies. LOL
Thanks for the help.
My atom is not getting charged.When i put it on ac adaptor it shows charging but even after 10 hoiurs the battery is empty and after removing from the power the phone shows main battery very low.
I tried charging thru laptop and same problem.
i have changed the battery also still the issue remains.
advice.
praveen
Yeah.. Atom behaves strangely sometimes.. In my case, some times when I switch on the bluetooth and try to charge it, It does not charge. But it seems to use the power coming from the charger to stay alive and operate normally (even if the battery is completely exhausted).
any suggestion how to make my atom charge
my xda atom started doing the same thing, I would plug it in and it would say that it's charging for about 5 seconds then the battery indicator would say full. Then I would unplug it and it would die out. I tried both charger & usb and the usb wouldn't work at all. So what I did is, I removed the battery let it sit for a minute. Put the battery back on and plugged the charger back in (without turning it on) and it's working. I was actually doing a search on this issue for the past couple of hours since this is the first time I've encountered this problem, but the phone seems to be charging now. I'll give everybody a update tomorrow to see if I have to keep taking out the battery everytime I want to charge it.
My problem is a bit different.
My Atom Exec charges with the USB cable synced to PC, and with one specific wall charger (specs: Input: 100-250V, Output: DC 5.5-12V, Max 1000mA, Min 150mA)
But it won't work with any other charger I try it with, even Universal charger I used to use with my HP iPaq. Is there some kind of trick to charging the Atom?
I as well have had this annoying problem happen a few times. I have a second battery and it happens with that battery as well so it has to be the Atom not 'reading the batteries' properly. As posted I have also found taking the battery our for a short time them putting it back seems to fix the problem untill it happens again
Try WM5torage. It will make your phone appear as a card reader in windows. Now pc will supply power to your device. Nice software trick.
the first battery charge on the HD is supposed to be a 8 or 10 or 12 hour charge? or on its not necesary
also the time used to charge it to the pc via usb cable is same as if ud plug it in the electric socket?
how long dose it take for u to charge ur phone.....
mine had 4 lines out of 10 and after 3 hours of it beeing conected to my pc and not in use its still got 4 lines....
opinions seem to vary on how long for 1st charge - personally I left mine on (mains) overnight, but that's just because I've had mobiles since year dot, and you used to have to!
But charging via PC doesn't seem to work as well as from the mains charger - depends a lot on the PC and how much juice it kicks out, some are a lot better than others.
Modern phones/batteries do not need "overnight" charging. My Touch HD even came with a little note saying you don't need to charge for 16hrs/overnight. Just charge until it's full...
Better to charge with wall socket because not all USB ports provide enough current. Some can't charge through the USB port while some can.
I can charge through my notebook but it takes a lot longer than the wall socket.
thanks bouth of u for the fast anwsers....
When I set WiFi settings to max performance, my HTC HD will not charge at all, actually it will loose charge during night, display is off, just WiFi, GSM and GPS is active, connected to provided wall charger. Back side of phone is really hot, I measured over 54°C
Problems charging.
guys(and lady's) Just got my HD. been running it for some time to drain the battery, while on my laptop the battery starts charging. I wanted to drain the battery to give it a good charge afterwords so I turnd off the option of charging while unit is active( in batt. menu) but When I got to 5% batt.cap. an tried to charge the unit (batt. option enabled again) it doesn't charge. now my batt. is empty and can't get in the phone. while on power my battery charging led gives a couple of seconds of charge indication then it turns off.
Any suggestions or is my battery dead. (charging unit is oke, and when on power the HD does give sufficient power to the battery (measured with mulitmeter) thx guys edit - Als when on power green and amber lights blink.
Could that be that your battery is too hot ? There is some safety protection that prevent the batyery to charge when it is over a temperature level.
battery not charging properly
My touch hd not charge the battery more then 50% i change the battery but same as before.
any suggestion
Regards
funstuffalex said:
also the time used to charge it to the pc via usb cable is same as if id plug it in the electric socket?
Click to expand...
Click to collapse
Power socket gives about 1amp - USB 500mA (.5 amp)
Touch HD Battery Charging Problem
The rom i am using is Energy 3 Rom
and try to use both sources wall socket and pc usb both are same.
if i charge the battery on usb cradle and put the phone it shoes 100% but after some use of the phone the charging start again and never show's full even left it over night.
Best regards
Not sure what's going on there,but try draining the battery to almost empty each time and then turn your phone off before charging it. Do this a few times and see if it helps. Mine took about a month beforeit came good.
Dear samlives
Thanks for helping
I will try it
Best Regards
HTC Touch Battery Charging Problem
I got a solution its not 100% but for time being its working for me.
Long press the power button and put the device in sleep mode.
All Done now charging 80 to 90% quite better then before.
Thanks a lot
Hi everyone!
I have just recently acquired an old imate k-jam that was not working
I managed to resurrect it for a wile by connecting 5v to the battery for a minute and then it was working for bout half a day and ten it just stopped working.
Now i need to use a 9v batter to get it to start and after 2mins it will just stop and the battery will be at 0v again.
Now do you guys think this is my battery being stuffed or is it the phone?
Stupid Question:
Is this the only way you're charging the battery? =-O
The connection wires to the battery is an "emergency jump start only" procedure. It's only used because the Wizard won't charge unless it can first boot.
You should connect your Wizard to a charging source as soon as (or before) it boots.
The AC wall charger is the best. Lacking that, use a USB cable that fits or a car charger, if you have one. The USB / car charger methods will take many hours longer. Also, avoid using the Wizard while it's charging. Just let it charge until the LED goes from orange to green. THEN if you get just a couple of minutes, it's new battery time.
If the Wizard boots, it's very unlikely that it's the Wizard/k-jam.
My Brother-in-law gave me his "old" Cingular 8125 when he "upgraded his phone", he said it was "too heavy and clunky and hard to use". Battery was deader than the proverbial doornail. After the "jump start", it took a full 8 hours of charging via the car charger and computer USB cable to get it to green. (He left the wall charger in South America somewhere.) The battery has been working fine for the last 8 months.
Hi guys,
Suddenly facing a strange problem since last night.
My x10i was running out of charge & i connected to the comp to charge while i was working. I noticed the charging speed was extremely low, so i restarted the phone to see if it would help. Did not.
Thought there is some problem with the cable, used a different cable as well, but no use.
The slow charging had stopped and eventually the phone died.
Tried connecting to the socket & charging, still no use.
The red led blinks when i connect the phone to a charger via the usb or the socket.
needless to say the phone does not even boot up now, obviously for no charge...
any ideas wat maybe wrong or wat i could do ?
please advice
Have you tried to let it charge for some time in off mode? As long as your battery is not dead, and the phone get the right voltage through the USB connector it should charge in an "emergency mode". This is a slow way of charging, but allows for charging without any electronic circuits to monitor it, it is not the same as the charging screen that usually displays when you connect the phone while it is powered off. Usually when a phone is completely discharged it needs to be connected at least 15 min, sometimes a lot longer, before the electronics kicks in, and starts the speedcharging.
My best advise would be to connect it to the mains charger, or a USB port you KNOW supplies power. Some laptops cut down on the powersupply to the USB ports when they run on battery. Let it be connected for a long time (several hours), and then try to power it on again.
If that does not help three things can be wrong
1. Somewhere the USB connection is broken, either in the cable or in the connector on your phone (or on the PC's connector, but that is less likely).
2. The battery is dead, modern batteries contain circuits that actually disables the battery when any given parameters gets outside the defined limits. This is to prevent the battery catching fire. On some batteries this renders the battery useless, and you need a new battery.
3.) The mainboard of your phone is dead, and hence nothing works, can be ruled out if you can borrow a battery from someone to test if your phone works then.
I hope a good and long charge can sort out your problem, that is the easiest fix, and it is free.
Hi O_K,
well, i have been charging (or trying to) the phone since it died last night.
i have used different chargers & different modes of charge (through the system & the wall socket) - no joy at all.
the LED blinks red a couple of times when connected.
Very occasionally, the SONY ERICSSON logo (startup) shows on the screen & it switches off again, back to the blinking.
So charging for a long time & through different chargers has not helped.
gonna try a different battery now to see if that can help.
Thanks for your response!
well, tried switching chargers & batteries.
The problem seems to be with the charging unit on the phone (USB)
with any charger or battery, wen connected the led blinks (like wen the phone is charging), but there is no charge happening.
eventually the phone dies, even if charging
any ideas?
There is a thread some where in this forum for fixing the same problem you have...I don't remember the exact name of the thread..if I find it I'll post the link here..Anyways what the guy did was
-Pull the battery out and connect the charger till the led turns green.
-put in the battery now and charge the phone...
and I think that was it.
Hope it helped..
EDIT: Found the link.
http://forum.xda-developers.com/showthread.php?t=944322