Related
Please help me, I need ROM 1.11.0000 German. I can't boot to Windows Mobile, only see Logo O2 then XDA Orbit has a black screen. I only can run Boot Loader.
Thanks all.
help me, Pleae
When you get into BootLoader why don´t you flash with official HTC WM6 ROM?
I flashed Rom WM6 Ship German from HTC successful but it's only stop at O2 Logo and auto turn off screen to black. . Please help me. Thanks all.
The update was successfull?
Try a reflash?
yes, i tryed twice but can't boot to WM only stop at Logo O2 and atuo turn off. If you have ship rom German, you can help me, thanks you
You flashed your device with HTC WM6 ROM... and your Bootscreen shows the O2 Logo...
hm...so the update was not succesfull...
Have you tried the official O2 ROM?
http://www.o2online.de/nw/support/downloads/software/xda/xdaorbit/index.html
I Flashed rom from site O2 - Online German but it's only can boot to O2 Logo and auto turn off screen to black. Please, anybody can help me. (
hieupc said:
I Flashed rom from site O2 - Online German but it's only can boot to O2 Logo and auto turn off screen to black. Please, anybody can help me. (
Click to expand...
Click to collapse
just try and run USPL first then flash the Rom [NEW ROM]: Artemis Vanilla 1.0 WWE - 5.2.1908 (Build 1850)
this should solve your problems.
i only can run Boot Loader, so i can't use USPL to Unlock CID
help me, please
please help me (
Hi!
I have a problem. I installed WM6.1 on my VPA C2. Everything went fine, but WM6.1 seemed to be slow on my device. So I decided today to downgrade to the original Qtek AKU2 WM5. After I was done downgrading my VPA is not booting and hangs up on the provider screen with the Vodafone Logo.
Here my facts:
IPL 2.21.0001
SPL 2.21.Olip
GSM 02.19.11
OS 2.18.7.7
Please tell me how I can reactivate my device.
Soft- and hardreset didn't work.
Greetings,
Chris
moiney said:
Hi!
I have a problem. I installed WM6.1 on my VPA C2. Everything went fine, but WM6.1 seemed to be slow on my device. So I decided today to downgrade to the original Qtek AKU2 WM5. After I was done downgrading my VPA is not booting and hangs up on the provider screen with the Vodafone Logo.
Here my facts:
IPL 2.21.0001
SPL 2.21.Olip
GSM 02.19.11
OS 2.18.7.7
Please tell me how I can reactivate my device.
Soft- and hardreset didn't work.
Greetings,
Chris
Click to expand...
Click to collapse
Your phone is HardSPL,did you first remove it before flashing wm5 ? if not than you have to first remove the HardSPL flash back to official original vodafone IPL/SPL and than flash official wm5.
Well,you are lucky,if it still boots up or goes into Bootloaders,coz flashing a rom with IPL/SPL even if its an official rom, to a HardSPL device will 'Brick' the phone.
Now,if it still gets into Bootloaders,reflash any custom build wm6 or 6.1 rom to recover the phone,than remove HardSPL,flash back to official IPL/SPL and than revert back to wm5,hope it'll work out.
@zabardast_1: Thank you for the fast answer!
Okay, I now flashed the phone again w/ WM6.1. Everything works again.
What do I have to do now to get WM5 back on the device? I don't want the Vodafone ROM, I want the Qtek ROM. How can I remove the Hard SPL so?
Greez,
Chris
Read and do the method explained in this thread and remove HardSPL :-
http://forum.xda-developers.com/showthread.php?t=342744
The Mighty Search
...knows all!
Hint:
try "remove HardSPL"
Thank you all!
Everything is back on WM5 and working!
Thanz!
Have a nice day
Hi, i try update ROM with WM 6, update go to 99% but on the end return error. When now i turn on Cingular 8125 i see onli red, green and blue screnn with IPL: 2.25.0001, spl 2.25.0001.
Pleas can you tel me how i can restore rom and my mobile go.
Have somebody ROM 2.25. for this mobile?
THX!
Flash back to the carrier ROM that came with the device and then try this new ROM.
Help
But how i can flash back to the carrier ROM? Im novice. THX
kareem9nba said:
Flash back to the carrier ROM that came with the device and then try this new ROM.
Click to expand...
Click to collapse
Forgot to ask this first, have you cid unlocked your device?
Hey I have a Cinguler 8125 IPL/SPL 1.08 and it stop at 99%, did the recovery , but still stop at 99% can someone have me.
my dear friend - read the stickies at the top of Wizard Upgrading forum. just read, and understand every word before you flash.
you're problem seems to be simple - you don't have SuperCID or your Carrier ID is still locked, therefore it won't update.
Go through the process, download the WST4.2 download all the programs required.
That, or you can flash the original ROM supplied by your manufacturer
Hi!
My Artemis just stopped booting.
All I see is the T-monile start screen.
I tried a softreset as well as a hard reset. nothing helped.
I can just enter the Bootloader.
CID is not unlocked yet.
g_cKeyCardSecurityLevel = FF
Is there a possibility to do this from bootloader and start a ROM update from Bootloader menu?
Original ROM is Austrian T-Mobile.
IPL 3.15.0001
SPL 3.15.0000
GSM 03.06.90
OS 3.15.0.0
hope somebody can help me.
I found an Austrian Original ROM for T-Mobile!
Now everything works fine!
http://rapidshare.com/files/294586683/CompactIIIUpdate.rar
hello everyone ....i want to upgrade my o2 orbit wm6 to wm 6.1 or any cooked rom currently i am using wm6 but the problem is my active syncro is not working is there any other to start uspl without acive syncro.....give some suggestions ...thank for ur time...
Hi i'm sebastiano, can someone help me pls?
i've buyed an htc p3450 with windows 6 , but i don't know the id and other codes.
i only know theese: ipl 2.20.0002
spl 1.11.0000
this morning i tried to change original rom with onyx 5.6
i've made this things:
i've installed cert.spcs.cab and enablerapi.cab
after using ELF_USPL_2.26.0000 i made the procedure for charge rom
and all were ok.
after i used the new os and its worked good. i made an hard reset before using definitively it. but after 10 minutes the system didn't start yet.
It run the image of Tim Operator and shut down.
The boot loader work now. i tryed to reinstall the sistem, the procedure finish without problem but when the system try to initialize the new rom , display the tim logos and after shut down..
someone know what i do and why system not reboot?
i read that i need the original italian rom for retry all my operations..but i don't know hot to find the id of my precedent rom...
pls help me
What's your actual IPL/SPL ? (you can see it in bootloader)
ipl 2.20.0002
spl 1.11.0000
theese are now
Do you know if it Elf or Elfin (Elfin is double memory), it's important if you have to flash a rom. Here's a link for original roms http://forum.xda-developers.com/wiki/index.php?title=Elf_Upgrades , none is Italian.
tito12 said:
Do you know if it Elf or Elfin (Elfin is double memory), it's important if you have to flash a rom. Here's a link for original roms http://forum.xda-developers.com/wiki/index.php?title=Elf_Upgrades , none is Italian.
Click to expand...
Click to collapse
yes it's surely elf because on the box the name is htc p3450/3452 Ita S
so elf isn't S i think is the xl model
now i'm going out, but if you can help me to know what is the problem, tomorrow we can meet again
i want to remove tim's brand and i will put in a good rom with large buttons
see you bb and thanks
As far as I know xl is elfin, and if you flashed the wrong rom maybe that's why you got this problem. Anyway here's a link to a good friend who's probably more expert on Italian roms than me, Flaviopak, send him a pm http://forum.xda-developers.com/member.php?u=778494