Hi!
My Artemis just stopped booting.
All I see is the T-monile start screen.
I tried a softreset as well as a hard reset. nothing helped.
I can just enter the Bootloader.
CID is not unlocked yet.
g_cKeyCardSecurityLevel = FF
Is there a possibility to do this from bootloader and start a ROM update from Bootloader menu?
Original ROM is Austrian T-Mobile.
IPL 3.15.0001
SPL 3.15.0000
GSM 03.06.90
OS 3.15.0.0
hope somebody can help me.
I found an Austrian Original ROM for T-Mobile!
Now everything works fine!
http://rapidshare.com/files/294586683/CompactIIIUpdate.rar
hello everyone ....i want to upgrade my o2 orbit wm6 to wm 6.1 or any cooked rom currently i am using wm6 but the problem is my active syncro is not working is there any other to start uspl without acive syncro.....give some suggestions ...thank for ur time...
Related
Has anyone managed to sim unlock the orange m600 unit
I have tried the lokiwiz from another thread but it didnt work.
rom version is 2.10.1.22 wwe
radio 02.07.20
extended rom 2.10.1.107
operator version 13.10.1.107
thanks
When you do manage it, do share the ROM!
willing to hep
IF anyone is working on this i would be willing to help
Me too ....
I can't unlock my phone to use my two SIMCards
HELP me ...
Please
(It's ORANGE FRENCH SPV M600 !)
Lockiwiz can only unlock your Prophet device if your Rom version is 1.XX.XXX. For the new AKU2 ones there is no solution yet.
:?
We just have to wait for an updated version of LOckiwiz or aWizard tools.
Ok, had a modicome of sucess with this, converted it to a Imate Jamin and then used the wizard unlocker to sim unlock it. Its works fine for voice but have not got the gprs to work yet. Although i am using a dual sim and this may be the problem.
will let you know as things progress
Has anyone tried the Imei check site (http://www.imei-check.co.uk/m600unlock.php) I know you have to pay for this, but that is still better than having your phone locked to orange (nothing against orange, just that I have an o2 contract...)
IMEI Check
Works ok unlocked mine there yesterday took less than 5 mins
Ok, thanks, i will stand a new version
Right, let me get this straight...
"Lockiwiz can only unlock your Prophet device if your Rom version is 1.XX.XXX. For the new AKU2 ROMS (i.e Orange M600 ROM) there is no solution yet."
If this is the case, then can we use A-Wizard or the hacked romupdateutility to FLASH back to a pre-AKU2 ROM and then use Lokiwiz to unlock the device, and then flash back to a 'latest AKU2 ROM' (Dopod one is latest and greatest atm) and continue to have a SIM UNLOCKED device???
Please can someone try this? I get my M600 in a week and need to be able to unlock it. Am in the USA atm and need to use a T-Mobile SIM in it.
Appreciate any help.
No lokiwiz can unlock the newer version, i have one and its done it fine, the problem is to achieve this i had to convert the unit from orange to either a dopod or an imate jamin.
Once flashed with the new rom lokiwiz quit happily unlocked the sim.
The only problem i have is i managed to disable the gprs connection detection. I think its something to do with the radio update and not quite getting the conversion right. I have been following the instructions from this and other sites and might have made a mistake.
Hopoing t sort this when i get time
I don't understand ???
You can UNLOCK or not ?
You want my ROM for check it and understand why it doesn't work ?
popeyesfx said:
No lokiwiz can unlock the newer version, i have one and its done it fine, the problem is to achieve this i had to convert the unit from orange to either a dopod or an imate jamin.
Once flashed with the new rom lokiwiz quit happily unlocked the sim.
Click to expand...
Click to collapse
thanks popeyesfx, but which ROM version did you flash to and how did you do it? Was it the new AKU2 Dopod rom specifically?
Did you have to use A-Wizard first to change CID or did you use the hacked romupdateutility to flash the rom from Orange to Dopod/I-mate?
Thanks
I used the modified update util of the ftp site and then used the latest jamin rom from the ftp site, this updated fine and i didnt get any operator errors.
I then used lokiwiz and it unlocked the sim fine.
just as an aside, the problem with the gprs turned out to be a thing with the orange unit itself. I tried a non flashed on and it has the same problem (doesnt show the connection but will connect to it fine when triggered by other software)
there is another link on here that gives you a full discription on how to convert the unit just cant remember it (old age im afraid lol) :lol:
Which ROM to install on an Orange SPV M600?
Just got a new Orange M600, herebelow is the device info;
ROM version: 2.10.1.22 WWE
Rom Date: 2/16/06
Radio Version: 02.07.20
Protocol Version: 413.1.03
ExtROM version: 2.10.1.107
Operator Version: 13.10.1.107
IPL 2.10.0001
SPL 2.10.0001
I used machinagod lokiwiz 0.3 to SIM unlock my SPV M600.
Now;
1) Will my phone be SIM Locked again if i did a Hard Reset?
2) Which ROM is the latest and best and can i install it on IPL/SPL 2.10.0001? If yes, then how?
merci pour l'astuce
Free Unlock Tested Prophet Spv M600 Pm300 From Amena
HI...
It's simple and the process is free ...
Only thing you need is the program Lokiwiz03a and no more. . .
1. Copies Cert_SPCS.cab, EnableRapi.cab to spv
2. install in the spv; 1. Cert_SPCS.cab, 2. EnableRapi.cab in order. . .
3. running the LokiwizMsl.bat which give you the code which you enter with not accepted simcard. . . enjoy. . .
work on all version and all spl . . . tested on ipl 2.15.0001 spl 2.15.0001 g4 chip . . .
Big thanks Juliocesarmaster ! Worked 1000% !
Juliocesarmaster that worked a treat thanks
Hi!
I have a problem. I installed WM6.1 on my VPA C2. Everything went fine, but WM6.1 seemed to be slow on my device. So I decided today to downgrade to the original Qtek AKU2 WM5. After I was done downgrading my VPA is not booting and hangs up on the provider screen with the Vodafone Logo.
Here my facts:
IPL 2.21.0001
SPL 2.21.Olip
GSM 02.19.11
OS 2.18.7.7
Please tell me how I can reactivate my device.
Soft- and hardreset didn't work.
Greetings,
Chris
moiney said:
Hi!
I have a problem. I installed WM6.1 on my VPA C2. Everything went fine, but WM6.1 seemed to be slow on my device. So I decided today to downgrade to the original Qtek AKU2 WM5. After I was done downgrading my VPA is not booting and hangs up on the provider screen with the Vodafone Logo.
Here my facts:
IPL 2.21.0001
SPL 2.21.Olip
GSM 02.19.11
OS 2.18.7.7
Please tell me how I can reactivate my device.
Soft- and hardreset didn't work.
Greetings,
Chris
Click to expand...
Click to collapse
Your phone is HardSPL,did you first remove it before flashing wm5 ? if not than you have to first remove the HardSPL flash back to official original vodafone IPL/SPL and than flash official wm5.
Well,you are lucky,if it still boots up or goes into Bootloaders,coz flashing a rom with IPL/SPL even if its an official rom, to a HardSPL device will 'Brick' the phone.
Now,if it still gets into Bootloaders,reflash any custom build wm6 or 6.1 rom to recover the phone,than remove HardSPL,flash back to official IPL/SPL and than revert back to wm5,hope it'll work out.
@zabardast_1: Thank you for the fast answer!
Okay, I now flashed the phone again w/ WM6.1. Everything works again.
What do I have to do now to get WM5 back on the device? I don't want the Vodafone ROM, I want the Qtek ROM. How can I remove the Hard SPL so?
Greez,
Chris
Read and do the method explained in this thread and remove HardSPL :-
http://forum.xda-developers.com/showthread.php?t=342744
The Mighty Search
...knows all!
Hint:
try "remove HardSPL"
Thank you all!
Everything is back on WM5 and working!
Thanz!
Have a nice day
hi i have one HTC p3300 with french language how can i install wondows mobile 6 english can write anyone step by step because this is the first time try to install windows mobile in smart phone ..........(and one question-HTC P3300 or Nokia N95 8GB is better) thnx......
hey
first about your question about which are better you can see this
http://my-symbian.com/s60v3/review_n95_artemis.php
and for flashing your mobile.. you have to do the following:
1. unlock your mobile by USPL [don't flash any rom without this step]
2.pick a rom you think it's the best for you
and finally while sycronizing run the update utility which are in the folder of the rom you picked.
and that's all
y_bother said:
hey
first about your question about which are better you can see this
http://my-symbian.com/s60v3/review_n95_artemis.php
and for flashing your mobile.. you have to do the following:
1. unlock your mobile by USPL [don't flash any rom without this step]
2.pick a rom you think it's the best for you
and finally while sycronizing run the update utility which are in the folder of the rom you picked.
and that's all
Click to expand...
Click to collapse
i not understand this (1. unlock your mobile by USPL [don't flash any rom without this step] can you write where to download this and how to unlock???
see this
http://forum.xda-developers.com/showthread.php?t=311403
y_bother said:
see this
http://forum.xda-developers.com/showthread.php?t=311403
Click to expand...
Click to collapse
Now i have one question is logically to unlock cid in my device because my device work with every sim card's can i only update rom without cid unlocking with uspl......my device: Ipl 3.13.0001, spl 3.13.0000, gsm 02.94.90, os .13.0.0.0 wich rom you prefer without cid unlocking...thnx.....
svchost said:
Now i have one question is logically to unlock cid in my device because my device work with every sim card's can i only update rom without cid unlocking with uspl......my device: Ipl 3.13.0001, spl 3.13.0000, gsm 02.94.90, os .13.0.0.0 wich rom you prefer without cid unlocking...thnx.....
Click to expand...
Click to collapse
you can only flash original htc rom if you don't unlock the device
cid unlocking is not sim unlocking and has nothing to do with sim or provider,it just removes some locks regarding the operating system
generally there are hard spl (uspl) and jump spl (or soft)
hard spl - cid unlocks the device permanently
jump spl - enables you to flash only one rom (for further usage you have to do the process again...but it doesn't matter right now)
only hard spl (uspl) is developed for artemis and is working like charm
i flashed few artemises many times and all works great
i found this rom http://forum.gsmhosting.com/vbb/showpost.php?p=3863781&postcount=70, can i flash with this rom without cid unlocking , my device Ipl 3.13.0001, spl 3.13.0000, gsm 02.94.90, os .13.0.0.0 , this rom 3.13.405....thnx...and this is a windows mobile 6.1 or ????
it's wm6
i'm affraid that you'll have to unlock it because unlocking is NOT required only for flashing original rom provided by htc specially for your device... in your case htc can provide you only FRE rom
so to flash WWE rom you'll have to unlock it
don't be afraid of doing that...thousands did it before you without any damage to the phone
unlocking is far better than bricking ( state where your device is unusable because of flashing other rom than the original ---bricking is in most cases reversible ,but don't play with it)
still i have to say "use at your own risk"
which flash(englissh) you prefer for my device htc p3300 wich is new version....
svchost said:
which flash(englissh) you prefer for my device htc p3300 wich is new version....
Click to expand...
Click to collapse
i used...my dad still uses artemis 4.02 rom by meschle...very good rom,has everything needed and lot of free memory...
i can't recommend any newer rom because i haven't tested any but you can always test it yourself
can you write me any link whre to download (english-rom), and tell me now i understanding good or no how to install rom??? first unlock cid with uspl and second updute rom, thnx for everything...............
can you write me any link where to download this artemis 4.02 rom by meschle (english-rom), and tell me now i understanding good or no how to install rom??? first unlock cid with uspl and second updute rom, thnx for everything...............
Hej I have some problems with my p3300
it just freezes sometimes and after half a minute or something
the display slowly becomes black
I want to install wm6 on it and hoped this might help something but
when i run the uspl and it starts running my device freezes again I think
(it gives a weird red green display) and is disconnected from my pc
I have no idea what is wrong or what I can do about it
so please help
thnx
...
forum.xda-developers.com/showthread.php?t=838044
Hi there, I'm reading this forum since this early morning but even if is full of infos, I cannot find the mine.
I got htc touch ELFin 3452
device elf 30050 256/128
cid id t-mob102
ipl 2.21.0002
spl 1.11.0000
cid unlocked
Totally bricked after flashing a wrong rom (3450) and inserting a SIM Card.
I tried several different roms, 'cause I don't have the original one but nothing. The PDA is blocked at bootloader, ActiveSynch does not work, Mytty restart only the splash logo.
Have I to suicide myself or there are some possibilities?
thanks a lot to everybody.
Novolli from wien, austria.
solved
i flashed:
1 a rom 4 the same device model,the dutch one
2 hard spl 4 elfin
3 the onyx rom
all the stuff above is in da forum.
pleeze take note I restored the device wo the original T-mobile rom
Dear all,
I have a HTC Charmer (t-mobile, German) and I am trying to change the ROM to an english one. I already managed to unlock the phone with Lokiwiz 3.0a but I didn't have any success at all trying to get a WiMo 5 ROM. Does anyone know where can I get one? I found one in t-mobile website (uk) but when I'm installing it, it says "invalid vendor ID".
I read in other threads that Prophet ROM may work.
http : //forum.xda-developers.com/archive/index.php/t-343356.html
However, I'm not sure if it's true and I'm afraid of obtaining a cool brick as an outcome.
Many thanks,
N
Next time just read and if you ask give more info. Which SPL and IPL do you have?
And to flash the English Aku3 to a German phone you need the NoID ruu. You can get it here: http://forum.xda-developers.com/attachment.php?attachmentid=42657&d=1183226200
If your SPL is 2 or higher I would recommend you to use an English WM 6 6.1 or 6.5 instead as they can be found in Charmer Mobile 6 subforum.
Before you flash WM6 or higher please read how it works. (The CID unlock part of the one howto isn't needed to be done!!)
Hope that helps.
And next time please read first and ask then!!!
have down grade my MDA compact 2 to WM 5 RUU_Charmer_38221_382116_026921_TMO_UK_WWE_Ship rom supplide by T-mobile and tried flashing it to 6.5 but it didnot work, now tried ur ROM to flash it to wm 6.1 but it get stuck at
while showing the following information;
IPL: 3.08.001
SPL: 3.08.001
GSM ; 02.60.21
OS : 6.1.0.0
Can you tell me what might have gone wrong.
Can you please help me.
Can you suggested any Cooked ROM which can i flash on to my charmer which is on WM2005 at present.
unforgetable0708 said:
have down grade my MDA compact 2 to WM 5 RUU_Charmer_38221_382116_026921_TMO_UK_WWE_Ship rom supplide by T-mobile and tried flashing it to 6.5 but it didnot work, now tried ur ROM to flash it to wm 6.1 but it get stuck at
while showing the following information;
IPL: 3.08.001
SPL: 3.08.001
GSM ; 02.60.21
OS : 6.1.0.0
Can you tell me what might have gone wrong.
Can you please help me.
Can you suggested any Cooked ROM which can i flash on to my charmer which is on WM2005 at present.
Click to expand...
Click to collapse
Hi!
You need 2.06 IPL,SPL to flash cooked ROMs.Downgrade is risky,I did it,but it needs some knowledge.
Before do anything with your Charmer,make a Goldcard,it can be useful!!!
http://forum.xda-developers.com/showpost.php?p=5612551&postcount=38
BR
Scootie