Database Users

I cannot change to "phone pad" input method

Hi All,
I have got my Qtek9100 since yesterday. I already upgrade to ROM 1.6.7.1 WWE. Today I just tried to have some basic lessons on my PPC. When I tried to change to "phone pad" input mode from "Input Selector" arrow, I failed. My PPC just stays in "Keyboard" mode. I can change to any other input mode, but "phone pad".
Please help

Hello,
I have had this problem and still suffer with it on my JAMin, the fault with mine is the sim compatibility with the rom.
try and start your phone without the sim if it works then the next step it put your phone into flight mode and do a soft rest, once the phone has started then switch off flight mode.
it should work

I don't think the Phone SIP (Soft Input Panel, used to enter text) has anything to do with the phone part?

I'm having the same problem with the new leaked AKU 2 ROM. I can't use the phone pad, and also it takes like 20 seconds when I click on the arrow to change the keypad.
Any ideas?

I have just noticed that "phone pad" pull out appearance is more or less occasionally. For instance yesterday, after soft reset I have got phone pad. Today I didn’t have it in the begging, but after some activities it appears again. So I cannot tell what the case is after all. The good news is that I don’t use it at all, so it is more like curiosity that real problem. 8)

I dont know if anyone can verify this but I had Phone pad working fine after a hard reset a week or so back. After the hard reset I did the reg tweaks for Glyph and the other one 4096 or whatever. After that it takes forever for the menu to pop up and then phone pad dosent come up when selected. Anyone else apply these tweaks?

Funny I also ran into the same problem just last week. Phone pad don't show anymore, and menu takes a long time to pull up. I thought it was the software "CE Star" which I installed, but looks like it's happening to everybody.
Hopefully somebody will find a solution soon. This is annoying.

Same problem here. No ROM update here though. I've seen the phone pad application before though. I did a hard reset a while back for something I can't remember now, but ever since then....no phone pad.
I can choose all the other options, but the phone pad stays in keyboard...
Please someone find the solution, the phone pad is essential to a true "one-hand" operation...

same for me...
always stays on keyboard, going into text messages, virtual keyboard always comes up and i cant change it from the input in settings... it stays on keyboard and keeps popping up. i dont need it, i got a pullout keyboard in that qtek 9100!!!!! please anyone?

I've got the same problem with my Atom. Has anyone already found the solution?

What worked for me is using registry wizard to change default input method to phonepad and soft reset and phonepad will be available - I think it stays available if you reset back to keyboard as default. You can use pocket tweak to do the same thing

Help!! Tmobile Wing Dead!

Hi,
Yesterday, all of a sudden, my Tmobile Wing started vibrating and it wouldn't stop. I took a look at it and the front two lights displayed red and blue during this vibration episode. The only way I could stop it was by taking the battery out. After reinstalling it, I did a soft boot and it turned back on and worked perfectly fine for about eight more hours. Then, last night, it started vibrating again on it's own so I did the same exact thing as earlier in the day.
This time, it did not respond to a soft boot. It won't respond to a hard boot either. It won't take a charge (or at register it's taking a charge). Nothing!
The only thing that displays is a little BLUE light on the keyboard where it says, ALT. If I remove the battery, the light goes out. Once I insert the battery again, the blue Alt light goes back on. The phone is completely dead otherwise.
I have not done any hacks, updates, changes whatsoever. It didn't get wet and was not dropped.
Any possible ideas what the little blue light is supposed to mean? It's got to be some kind of service code or something? I'm pretty sure the battery still has a charge, but I haven't tried a new one. I even tried the plugging in the AC adapter and the phone still wouldn't respond at all. Is there any reason to think the computer would recognize it with the USB cable when it won't even power up?
Any solutions or where to turn with this thing? I think the little blue ALT light must signify some error code possibly......
Thanks.

it's the ALT key..
so you can input the blue characters on the keyboard.
you're phone is possessed.. sorry

can it go into bootloader mode(hold camera key and pole hole on side)?
if it can just flash a new rom into it or the original tmobile stock rom.

Have you hard-resetted your phone?
Which ROM are you using?

mv3, the answers to your questions.
Brudha said:
It won't respond to a hard boot either. I have not done any hacks, updates, changes whatsoever. It didn't get wet and was not dropped.
Click to expand...
Click to collapse

--------------------------------------------------------------------------------
Hey I Install The Cube And Enable It But How Do I Run It Like How To I Turn It On What Button Am I Suppose To Put

--------------------------------------------------------------------------------
Hey I Install The Cube And Enable It But How Do I Run It Like How To I Turn It On What Button Am I Suppose To Put

vietkiller said:
--------------------------------------------------------------------------------
Hey I Install The Cube And Enable It But How Do I Run It Like How To I Turn It On What Button Am I Suppose To Put
Click to expand...
Click to collapse
what cube did you install?
well install ftouchflo config by schaps and enable ftouchflo
i suggest you uninstall your cube and install slithers cube here.
then either get ftouchflo config or get the _ftouchflo_config.txt file from the windows folder and make the down-up gesture to be slithers cube.

kidnamedAlbert said:
mv3, the answers to your questions.
Click to expand...
Click to collapse
uhmm...no.
hard boot does not = hard-reset.
boot = to load your device.
there's no such thing as a hard boot or is there?
i assumed this person meant a power cycle..because if the device is not booting even after performing a hard reset command via hardware keys..blablablah..
saying you have a wing does not mention which of the stock ROMs is on the device.
so yeah... my questions werent answered.. :/

mv3 said:
uhmm...no.
hard boot does not = hard-reset.
boot = to load your device.
there's no such thing as a hard boot or is there?
i assumed this person meant a power cycle..because if the device is not booting even after performing a hard reset command via hardware keys..blablablah..
saying you have a wing does not mention which of the stock ROMs is on the device.
so yeah... my questions werent answered.. :/
Click to expand...
Click to collapse
I might be using the words 'reboot' and 'reset' interchangeably (incorrect or not). What I have attempted to do is a soft reset by depressing the little hole by the volume control. This is what worked the first time for me. The phone will NOT respond to that now.
In attempting a hard reset, I pressed the two buttons on the front marked with a '-' at the same time as depressing the same hole. Nothing responds to this at all. Is this the corrrect procedure for a factory reset?
I'm not sure the exact ROM installed. I have not changed it at all since the phone was purchased, so it's original. Since the phone doesn't even work now, doesn't seem like I can find out the ROM version.

Brudha said:
I might be using the words 'reboot' and 'reset' interchangeably (incorrect or not). What I have attempted to do is a soft reset by depressing the little hole by the volume control. This is what worked the first time for me. The phone will NOT respond to that now.
In attempting a hard reset, I pressed the two buttons on the front marked with a '-' at the same time as depressing the same hole. Nothing responds to this at all. Is this the corrrect procedure for a factory reset?
I'm not sure the exact ROM installed. I have not changed it at all since the phone was purchased, so it's original. Since the phone doesn't even work now, doesn't seem like I can find out the ROM version.
Click to expand...
Click to collapse
continue holding the 2 soft keys, don't release. a warning should appear.. if you press the 'Send' key... the send call/talk/etc button.. then it should initiate a dealer specified ("hard")reset.. if you press any other buttons, it will ignore the attempted hard reset.
if that doesn't happen.. then that's very uncool....

Well, after trying just about everything, I've pretty much accepted there's got to be some sort of 'short' to the motherboard. I think the ALT light constantly on signifies the phone thinks that key is indefinitely in a depressed state. Or something like that...........

same thing happened to my phone. does anyone know if there's a known fix for this?

"L" letter problem

This is the most bizarre that could happend...every single time i type the letter L my mogul froze, it doesnt matter if its from the screen or keyboard still do the same thing and it doesnt allow me to do anything AT ALL!! it start with opera, now i cant even send txt message...this is really annoying..

lepapirriky said:
This is the most bizarre that could happend...every single time i type the letter L my mogul froze, it doesnt matter if its from the screen or keyboard still do the same thing and it doesnt allow me to do anything AT ALL!! it start with opera, now i cant even send txt message...this is really annoying..
Click to expand...
Click to collapse
I'm guessing hardware failure. Something failed on a board that's under the L key. Pressing it flexes whatever is failed such that it causes a short or opens a connection/trace on the board.
its time to get 'er serviced/replaced.

lepapirriky said:
This is the most bizarre that could happend...every single time i type the letter L my mogul froze, it doesnt matter if its from the screen or keyboard still do the same thing and it doesnt allow me to do anything AT ALL!! it start with opera, now i cant even send txt message...this is really annoying..
Click to expand...
Click to collapse
doesnt sound hardware because the screen does it also. Maybe try a hard reset.

rockfshr said:
doesnt sound hardware because the screen does it also. Maybe try a hard reset.
Click to expand...
Click to collapse
its really weird, it only happends when i type the letter at the beggining but not in between, ei Lame but not blame, this is really weird.
i thought about doing a hard reset but my only concern its my contacts, is there any other way to save it besides using the outlook?
thanks guys.

BUMP?
anyone!!

i had the exact same problem with my f key this week. I was forced to do a hard reset go get it to stop freezing. it was really weird how it just started out of the blue i wonder what the reason for it was tho.

joo333 said:
i had the exact same problem with my f key this week. I was forced to do a hard reset go get it to stop freezing. it was really weird how it just started out of the blue i wonder what the reason for it was tho.
Click to expand...
Click to collapse
how did you backup your contacts?

Sorry missed the soft keyboard bit.
My guess is corrupted word completion file, since it happens on the first letter.

I am having a similar problem with mine only when texting . I f I do a hard reset will I lose all of the registry tweaks I have made along with my aGPS fix? If so that would really suck.

schettj said:
Sorry missed the soft keyboard bit.
My guess is corrupted word completion file, since it happens on the first letter.
Click to expand...
Click to collapse
this sounds like a possibility. if you're having this problem, try turning off word completion and see if the issue remains... may be able to rule that out.

it got worse..it got to a point that i couldnt type anything, not even see the keyboard on the screen..i had to hard reset and lose all my contacts...i install outlook to only backup my contacts but it gave me error message..really bad..now since i hard reset all synch goes fine...too bad i had to hard reset..

Leo won't boot anymore

Hi everybody!
Just got my Leo two days ago and I was bombed. Had a 4350 before and you can imagine what big a difference that is. But now this occured and I really don't know what the heck is going on here. Without any reason the Leo froze after not using it for two hours, just an active sync connec. So I grabbed it and it was frozen. Thus i did a soft reset. When it rebooted, for some reason it seemed like the first time I started the device, asked me for the time and google settings etc. Very confused. But then I came to the Homescreen, which was blank, just like after a hard reset. Ok, I thought. This is nasty but all my stuff was backed up, so what. I tried to switch to the settings panel and found it ultra super slow and the settings panel wouldn't even appear on the screen, just the title on top. I thought, this is wrong, very wrong and decieded for another soft reset. And now it won't boot at all. It stands still in the screen where it shows this pink circle and the RUU and whatnot version.
I am speechless. It just doesn't start, tried it like 4 times now. I didn't update RUU or anything since this thing is T-Mobile branded and it wouldn't let me. I tried it this morning but just got the error in windows that my device won't allow... After that I took it for a 3 hour ride outside and used it for like 10 more hours. And now this!
Has this ever occured to anyone else around here?
Any suggestions? I'm quiet angry right now, think I gonna return it tomorrow. Hopefully they don't say I tried to flash it or whatever since I did not. Cannot explain this to me.
Regards,
Zoimt

hi sounds like bad news have you tried a hard reset

Do a hard reset, press the up and down volume then at the same time press the power button. Keep all three pressed for about three seconds and a hard reset will start. If it happens again you have a faulty device.

I thought a hard reset is only possible in windows. Since I never come so far in booting process, I just tried it once but nothing happend. Not sure if I tried it for 3 seconds I assume I did

zoimt said:
I thought a hard reset is only possible in windows. Since I never come so far in booting process, I just tried it once but nothing happend. Not sure if I tried it for 3 seconds I assume I did
Click to expand...
Click to collapse
Take the battery out then put it back in. Once it's in press all three buttons at once until you see the hard reset begin. It will ask you to confirm by pressing the up volume button.

Oh boy! It started again! I thought I tried to hard reset it with the key combo you also adviced me and nothing happened but this time it worked. Thus I assumed it only works at a later point in the boot process. But thanks for showing me the opposite!
Man, this takes a load off my mind, thanks! Just hope this was a one time thingy and doesn't occur every 28 hours again.
Regards,
zoimt

hd2 did a master reset by itself and bricked itself.

I pressed the I.E to log on here funny enough,when suddenly my hd2 did a master reset by its own accord. A full master reset not a soft reset. How can this be even possible ?. This is crazy doing it by itself. After a while i tried setting up my internet again when it froze. i did a soft reset and now its stuck in load up(blue o2 screen). tried taking battery out and in and several soft resets but same. help.

fallenmonk said:
I pressed the I.E to log on here funny enough,when suddenly my hd2 did a master reset by its own accord. A full master reset not a soft reset. How can this be even possible ?. This is crazy doing it by itself. After a while i tried setting up my internet again when it froze. i did a soft reset and now its stuck in load up(blue o2 screen). tried taking battery out and in and several soft resets but same. help.
Click to expand...
Click to collapse
are you sure you havent tried flashing a custom rom recently?

Thankyou for the fast reply. My hd2 is still basically standard. No roms flashed ever. last thing i downloaded was yesterday which was win office 2010 update on market place. phone has been fine all day.

started working again. i saw that somehow only had 11mb left on device memory. it was 90mb a few hours a go. i started looking into win and what suddenly swallowed my memory when it has self master reset again. Going to call it HAL from now on lol. Im just leaving it on charge at moment.

Just a quick update.. I managed to beat hal to it and do a master reset. Seems to be working ok. Even opera working again. I think it was the app i downloaded from market place. All i can think off.

all the best and good luck
mine is on repair now, got oily thingy on the center of screen...

screen size of games on hd2
hello... i had a brief search in thease forums but couldn't see anything on my issue... appologies if i have overlooked it... i was wondering if there was any way to increase the screen size of some games i have on my hd2... they appear at the top left of my screen and look like they would be more comfortable on my old se k800i screen...
if anybody has any answers to help me then it would be much apprieciated...
thanks in advance
luke

TheDaddy187 said:
hello... i had a brief search in thease forums but couldn't see anything on my issue... appologies if i have overlooked it... i was wondering if there was any way to increase the screen size of some games i have on my hd2... they appear at the top left of my screen and look like they would be more comfortable on my old se k800i screen...
if anybody has any answers to help me then it would be much apprieciated...
thanks in advance
luke
Click to expand...
Click to collapse
this is the most unadequate place to post this question, probably it's a case of thread hijacking, anyway those would be games programmed to specifically work on VGA screens, there's no way that I know of to make them work in WVGA, because they just don't know how to

sorry... was browsing through... didn't mean to post hear... but thanks anyway