Database Users

T-mobile Wing issue

So I been searching on the forum for a while now, still haven't found the solution. Well I was deleting the status bar on the bottom of the screen from the registry. Then I did a soft reset, but it kept repeating itself on the boot. T-mobo screen, the Window mobile screen, turns black, then back to t-mobo screen and so on. So the solution to that problem was to take out the memory card and reboot it. But thats kind of annoying since I have soft rest once in a while and I don't want to keep taking it in and out. Does anyone have a solution for this issue?
Thanks in advance.

don't want to bash the n00b here but you could try posting this in the correct section. the t-mobile wing is not the same thing as a HTC wizard. you should try posting this over in the HTC herald section.

oh I'm sorry. I been looking through this forum and been dling things from it here. So I thought it would fit here. Thanks tho.

Sorry, but... along the way I did something that had the same effect, multiple reboots after a soft reset.
The only thing that worked was to hard reset and to rebuild my set-up (including removing the T-mo tray). Works fine now.
-Richard

Quite a few threads on this.
http://forum.xda-developers.com/showpost.php?p=1180349&postcount=1
Search soft reset loop, or boot loop and you'll find what you're looking for.

yea thanks for the reply. I couldn't take it anymore, so I did a hard reset.

stucked on 2nd splash screen

hi guys, this might seem to be posted a lot of times but i havent found anyone who experienced the same problem as me. ive flashed a custom rom (not found in xda dev) and the phone went well for 3 weeks to a month.however, today(lunchtime) i had a problem i soft reset my device and i was stuck at the 2nd splashed screen. i dont think my hermes is bricked because i can do anything a normal hermes do before. (pda function, calls, sms) really no problem at all until today. ive done what the wiki said like
Problem 2: stuck on windows mobile screen
Try to soft reset with stylus and wait 5 minutes on the windows mobile screen to see if OS boots
If all you get is same windows mobile screen, remove the battery for some time (about 20 min should be enough) and put it again.
Again, if all you get is same windows mobile screen do a hard reset.
If doesn't solve the problem do a hard reset, but do not press spacebar to reboot after. Instead, do a soft reset with stylus when the device asks you to press spacebar.
Check if you might have the NO GSM Problem
well i cant go pass the 2nd splash screen so what i did was hard reset it. and problems gone. my concern is ive lost a lot of documents because of what happened. so i just wanna ask you guys what could be the problem and the solution to prevent this from happening again.
much respect to all here!
TIA

What do you do just before the problem occur?

best thing to do is hard reset you phone this will reinstall you OS and resolve the problem. You need to old the 2 top soft key and press the reset but with your stylus. This will then bring then take u into the hard reset mode. follow the prompts on ur screen by using your keyboard .
This will work as i have experienced the same problem
kind regards
Ash

Did u happen to
a) disable the bottom tray
or
b) set PIE cache to storage card?
Both tend to cause this, tho not in every case.

hi guys
Did u happen to
a) disable the bottom tray
or
b) set PIE cache to storage card?
Both tend to cause this, tho not in every case.
ive done both of this in my ppc. hehehe
@sir mikechannon
yeah that was my badd. havent done bckup and all. hehehe
@sir ghz
hmmm nuthin, just the usual... havent installed anything prior to the problem.
well guys... thanx for the comments my ppc doing good now, i just hope it wont happen again. hehehe. much respect!

G-sensor failure

Hello everyone:
I've found a failure on my blackstone's g-sensor.
I noticed it wasn't working playing Teeter.
I tried to configure with the tool provided in the ROM but une of the bubles (horizontal) always goes back to the right side.
Tried hard reset, but still got the problem.
Is there something like a driver that I could reinstall, or should I send it directy to HTC??
Thanks in advance

If HARD reset doesn't work, I would suggest sending it back for repair.
- Steve

Yes, HARD reset didn't work.
The SOFT reset was the first thing I tried...
¿Wouldn't be possible to reinstall the software that uses the g-sensor?

The hard reset restores your phone to the state it was out of the factory. No additional software to the preinstalled stuff is required for the G-sensor to work. If immediately after a hard reset the G-sensor still does not work, it's 99% a hardware problem. The reason why hard reset is suggested is to make sure that other software possibly disturbing what does not work (the G-sensor software in this case) are removed, but, again, out of the box the phone already has the software and drivers needed for each part of it to work.
By the way, the calibration error is a clear signal of the problem.

Well my friends...
The g-sensor failure issue has been solved without HTC's help...
Maybe using the Advanced Config tool, I changed the Gsensor value (don't know how to translate it, in spanish "Intervalo de muestreo del acelerómetro").
I set it in 200. Today, as my last attempt to solve it, I changed it again, to 150, and... et voila!!! It works!!!
The strangest thing is that I made several soft reset, even one hard reset (yes, a hard reset, I know how to do a hard reset), but it didn't worked.
It seems that some changes we make with this configuration tools, stay the way we set them, even if we make a hard reset... Is this possible?

Black Antitoon said:
If immediately after a hard reset the G-sensor still does not work, it's 99% a hardware problem.
By the way, the calibration error is a clear signal of the problem.
Click to expand...
Click to collapse
Definitely, I've found the 1% that always bothers us in computers...

I still tend to think that your sensor was "stuck" for some reason and after a bit of moving and shaking the device with normal use it got "unstuck". The stock settings are always correct for basic hardware features, and are the same for all users.

Black Antitoon said:
I still tend to think that your sensor was "stuck" for some reason and after a bit of moving and shaking the device with normal use it got "unstuck". The stock settings are always correct for basic hardware features, and are the same for all users.
Click to expand...
Click to collapse
Maybe you're right.
In fact, I've changed back the value back to 200 (ms.), and it still works...
But it didn't get unstuck by the normal use... I tried it several times. It happened only when I changed that value.

elmalomalo said:
But it didn't get unstuck by the normal use... I tried it several times. It happened only when I changed that value.
Click to expand...
Click to collapse
By doing a hard reset this value should be reset to default, so if you really did a hard reset, it probably wasn't a software issue at all.

I don't have any explanation. Maybe it was just a case that it got unstuck in that moment, maybe not, and changing the setting caused something in a microchip of the G sensor work again... No ideas.

johnpatcher said:
By doing a hard reset this value should be reset to default, so if you really did a hard reset, it probably wasn't a software issue at all.
Click to expand...
Click to collapse
Yes, a hard reset, switching on the PDA while keeping volume down pushed, as the user guide says...
I don't have any explanation. Maybe it was just a case that it got unstuck in that moment, maybe not, and changing the setting caused something in a microchip of the G sensor work again... No ideas.
Click to expand...
Click to collapse
OK, at least, if anyone reports same problem, this could help.

Hi,
I m facing the same problem as you described, my horizontal tube is stuck on the left side.
I tryed to change the polling interval setting without effect.
I discovered a weird (from my point of view) inside the registry. The calibrate2-? is set set at a very hight value (only 1 in binary).
Changing it by a registry editor doesn't work, it goes back to the weird value when i restart the device.
Can you tell me if you had such values when you experienced the problem ?
Thank you

Hi again,
You know what ? i m happy
It was a pure physical problem. I give on my touch hd a little pinch on the left side and it unstuck the problem.
Everyone must know that it can happen. No change inside the registry is needed. You just have to shake a bit your hd to make it work again (if you break it i m not responsible )

yann.gloriau said:
It was a pure physical problem. I give on my touch hd a little pinch on the left side and it unstuck the problem.
Click to expand...
Click to collapse
..............

I had this problem after I traveled in a bus on a bumpy road with HD in my pocket - No pressure fall or anything. I am surprised to see so many had his problem. Hard Reset was no use. I shook my HD vigorously and this solved it. I was worried if this baby gets a Shaken baby syndrome by the shake

Lol! You remind me of my car stand. Each time I am on my car with the HD on its stand, and I bump into a hole on the road, the screen rotates for a short while (due to the G-sensor). This is annoying, but funny... I think I will add TomTom to the exceptions list.

yann.gloriau said:
Hi again,
You know what ? i m happy
It was a pure physical problem. I give on my touch hd a little pinch on the left side and it unstuck the problem.
Everyone must know that it can happen. No change inside the registry is needed. You just have to shake a bit your hd to make it work again (if you break it i m not responsible )
Click to expand...
Click to collapse
Had the exact same problem, sensor was stuck on the left. I was about to retire the HD and go back to my rhodium when found this post.
Pinching didn't work but a minute of VIGOROUS shaking did the trick! Still looking for my stylus which flew out ... be careful when trying this at home children
Yay, my HD lives!

Please advice where can i find the advance config tool? i'm facing the same problem

rahilpatwa said:
Please advice where can i find the advance config tool? i'm facing the same problem
Click to expand...
Click to collapse
Here you go mate

rahilpatwa said:
Please advice where can i find the advance config tool? i'm facing the same problem
Click to expand...
Click to collapse
It sounds like the less Advanced tool also does the trick - just give it a vigorous shake

Leo won't boot anymore

Hi everybody!
Just got my Leo two days ago and I was bombed. Had a 4350 before and you can imagine what big a difference that is. But now this occured and I really don't know what the heck is going on here. Without any reason the Leo froze after not using it for two hours, just an active sync connec. So I grabbed it and it was frozen. Thus i did a soft reset. When it rebooted, for some reason it seemed like the first time I started the device, asked me for the time and google settings etc. Very confused. But then I came to the Homescreen, which was blank, just like after a hard reset. Ok, I thought. This is nasty but all my stuff was backed up, so what. I tried to switch to the settings panel and found it ultra super slow and the settings panel wouldn't even appear on the screen, just the title on top. I thought, this is wrong, very wrong and decieded for another soft reset. And now it won't boot at all. It stands still in the screen where it shows this pink circle and the RUU and whatnot version.
I am speechless. It just doesn't start, tried it like 4 times now. I didn't update RUU or anything since this thing is T-Mobile branded and it wouldn't let me. I tried it this morning but just got the error in windows that my device won't allow... After that I took it for a 3 hour ride outside and used it for like 10 more hours. And now this!
Has this ever occured to anyone else around here?
Any suggestions? I'm quiet angry right now, think I gonna return it tomorrow. Hopefully they don't say I tried to flash it or whatever since I did not. Cannot explain this to me.
Regards,
Zoimt

hi sounds like bad news have you tried a hard reset

Do a hard reset, press the up and down volume then at the same time press the power button. Keep all three pressed for about three seconds and a hard reset will start. If it happens again you have a faulty device.

I thought a hard reset is only possible in windows. Since I never come so far in booting process, I just tried it once but nothing happend. Not sure if I tried it for 3 seconds I assume I did

zoimt said:
I thought a hard reset is only possible in windows. Since I never come so far in booting process, I just tried it once but nothing happend. Not sure if I tried it for 3 seconds I assume I did
Click to expand...
Click to collapse
Take the battery out then put it back in. Once it's in press all three buttons at once until you see the hard reset begin. It will ask you to confirm by pressing the up volume button.

Oh boy! It started again! I thought I tried to hard reset it with the key combo you also adviced me and nothing happened but this time it worked. Thus I assumed it only works at a later point in the boot process. But thanks for showing me the opposite!
Man, this takes a load off my mind, thanks! Just hope this was a one time thingy and doesn't occur every 28 hours again.
Regards,
zoimt

Leo Screen freeze crash Issue

I have been having some problems with my leo where i cannot unlock it after coming out of standby. The screen just freezes.
And sometimes when i press the END button to get it out of standby, the key lights come on, but nothing else happens.
Apparently others have this issue too! - check out u-tube video:
http://www.youtube.com/watch?v=wqJw5omurLA
Has anyone else had this or still having this? Do i have to return my phone for another one?

Have you tried a hard reset?

ronald_adi said:
I have been having some problems with my leo where i cannot unlock it after coming out of standby. The screen just freezes.
And sometimes when i press the END button to get it out of standby, the key lights come on, but nothing else happens.
Apparently others have this issue too! - check out u-tube video:
http://www.youtube.com/watch?v=wqJw5omurLA
Has anyone else had this or still having this? Do i have to return my phone for another one?
Click to expand...
Click to collapse
Haven't had the issue. Vaguely read about this somewhere else, might be related to the default WM 6.5 lockscreen. Disable it and try something like S2U2 and see if u still have the same issue.

I have same problem with my device. Is this software or hardware problem? I have to do hard reset, and after that display can be stack. So I have to do soft reset, and phone working. It happens to me 2 times in one day, both times after I have been in room with very bad signal. Maybe that can produce problem. Symptoms are same as on YouTube video.
Does anybody know how to solve this?

i face this b4, it happend few times a day. but after i do hard reset the problem is solved. i think should be installed something conflict with the phone or inproper amended some registry

i used to have this but now it is less common after I have installed WMTask to Close applications when I hit "X" (instead of WM just minimizing the app). In effect it frees up memory and hopefully does cause your HD to struggle for memory when waking up?

guys,
for your info, I installed a new ROM and this didnt help. So it is NOT a SOFTWARE issue. I returned my phone for a new replacement unit and no more issues.
Sorry to say but if u have this problem u need to send your phone back.
I now have no more issues!

Mine has been doing this a lot. Turning it back on just results in the keys lighting up and nothing more.
Work around is to turn on so keys light up, hold down power key until lights all go off, then press power key again ... it will come back to the lock screen.

Thanks for your prompt answer.
It is not seems as memory problem, because if I remove and return battery problem stay. Maybe it can be problem with display driver. Also it is a little strange that after hard reset, I have to do soft reset to get it work again. I not like to change rom version, because it can void my guaranty, and maybe it is hardware problem.

Mine does exactly the same thing once it gets warm. Decided to return it after trying multiple hard resets. ROM changes and S2U2. Made no difference.
As I've joked on this forum before (although it's true), I had to put mine in the freezer to get the screen to work again so it sounds to me like a hardware issue.
Mine's going back for a replacement next week...

HTC HD2 freezes quite often Solution
le_paulo said:
Mine does exactly the same thing once it gets warm. Decided to return it after trying multiple hard resets. ROM changes and S2U2. Made no difference.
As I've joked on this forum before (although it's true), I had to put mine in the freezer to get the screen to work again so it sounds to me like a hardware issue.
Mine's going back for a replacement next week...
Click to expand...
Click to collapse
Well thanks for the solution so if we get that bug , just put your brand new HTC HD2 on the freeser lol

I had similar problem four mornings in a row. Hardware keys would light up but screen dead. Soft reset got it going again, and a hard reset made no difference, even without reinstalling my softwares (I had a clock alarm set for each morning, maybe this is just coincidence). Someone on another forum with a similar issue suggested installing MemMaid, and for me this has worked. Running a regular 'clean' has meant that the problem has not returned, for three days now. So far! I notice that every clean finds many duplicate or invalid 'notifications', not sure if these somehow accumulate and cause the device to crash? Maybe worth trying? So problem for me at least is software related. HTC need to sort this as it is really annoying, and MemMaid is only free as a trial.

dazz29 said:
I had similar problem four mornings in a row. Hardware keys would light up but screen dead. Soft reset got it going again, and a hard reset made no difference, even without reinstalling my softwares (I had a clock alarm set for each morning, maybe this is just coincidence). Someone on another forum with a similar issue suggested installing MemMaid, and for me this has worked. Running a regular 'clean' has meant that the problem has not returned, for three days now. So far! I notice that every clean finds many duplicate or invalid 'notifications', not sure if these somehow accumulate and cause the device to crash? Maybe worth trying? So problem for me at least is software related. HTC need to sort this as it is really annoying, and MemMaid is only free as a trial.
Click to expand...
Click to collapse
I am not quite sure that is software problem, if you done hard reset, and display still not respond on touch.

Soft or hard reset could clear the problem, I just mean that a hard reset didn't avoid the problem coming back. My current ROM is the official 1.48, didn't have this issue on the previous official ROM.

I got confirmation from service today, that it is hardware issue with phone display.

Bogi79 said:
I got confirmation from service today, that it is hardware issue with phone display.
Click to expand...
Click to collapse
How do you know if youre phone should be replaced? Does it happen every time?
This happens to me every so often.

ya, I'm experiencing this as well. real drag!

The same thing happened to me aswell.
I recieved a message and when I tried to unlock the screen, nothing happened. The hardware keys worked but the screen didn't register my touches.
Tried soft reset, didn't work. Removed battery for a while, didn't work. Hard reset, didn't work. Flashed official ROM from HTC, didn't work.
It's been sent for repair. Hope I get it back quickly

I actually don't. But I insist to get phone replaced. I wrote appeal to company where I buy phone. Also I wrote down S/N and IME so I can check if I get new one.

Got the exact same problem, have been complaining about this in different topic here.
Sometimes couldn't unlock screen for many hours... then suddenly works again.
I've tried everything : decreasing/inscreasing screen sensitivity with reg, removing the screen lock, stopping the weather animation as suggested, putting a second finger in a corner while touching the screen : NOTHING WORKS
The only thing i'm convinced : it IS a hardware problem.
When the screen didn't react at all for some hours, sometimes playing with its humidity could help for a few minutes only ( by cleaning the screen with some special wet lcd cleaner or cleaning the screen with some humidity from my breath).
Also i'm travelling a lot (several countries a week)... and noticed THE PROBLEM APPEARS IN COUNTRY WHERE HUMIDITY IS HIGH. (that's also the reason why freezer could help. in a freezer, it's so cold, that the humidity is not in the air anymore, but is in ice state).
MAYBE SOME GOOD NEWS:
I recently bought the HTC screen protection for the HD2 (5 days ago).
Thanks to it, Air humidity doesn't touch the screen directly anymore.
And the problem hasn't appeared, not even once!
I just arrived a few hours ago in the country where i always had the problem (cause of its high humidity), and guess what ? Screen is still working great
I'll keep u up to date if problems come back.... but for now, i really think this is the solution (with logical explanation).
Kaemon.