Hi,
I'm facing a problem with my customer O2 phone. It's showing "No Service with "!" mark. I have upgraded everything .. but nothing changes ..
It's a hardware problem or Software problem ??
Thank You
ive got the same problem.... can anyone help please.
You need to reflash using the 'radio ROM.nbf' file.
My magician's radio, stops working after the unit reboots after doing a ROM update. The radio works immediately after the inital splash screen (before the extended rom autorun). After this, the radio doesn't work.
If I skip the extended ROM instal, by rebooting the device prematurely, the radio still doesn't work.
I've tried many different ROM numbers. I've even downgraded to the stock ones that came with the unit.
Any suggestions?
Hint: My radio only works immediately after a hard reset, but not after rebooting using the extended ROM (customization). (aborting the customization, the radio doesn't work anyway).
it could be barred IMEI
What now works for me, is enabling, then disabling 'Flight-mode" on the phone.
Related
I have a Qtek S200, which is stuck in the boot sequence. what i beilieve is unique about my situation is that i am able to sucessfully flash updates roms, but even before i messed with anything the problem began. the strange thing about what is happening is on the boot scree where it should show all the rom versions, the 'GSM' line is missing. this seems to happen randomly, but most of the time, and the phone never goes beyond that screen, it just eventually goes all white, then reboots. i have flashed with older and newer radio roms, and have finally flashed with the newest dopod rom (2.15) with no change in the situation. does anyone have any suggestions?
Thanks, Mike
maybe you can try this one
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=444&PN=1
or downgrade to a v1 rom and see if you get to boot all the way
Now you issue could be something else but what you can do to make sure (to a certain level) that the GSM radio is the culprit is take out the SIM card and try to turn on the device. This way radio would not be initialized and if radio is the problem, this way device should boot up successfully.
I have had this problem with my older JAM and had to take it to service center (They said radio was sucking in too much power and making the device to reset itself.)
Hi all,
Since last friday I'm the happy owner of an S200, until sunday atleast. After a soft-reset, initiated from windows, my device won't boot anymore. It hangs in the red-green-blue bootloader screen (says: IPL 2.09, SPL 2.09). I've tried soft-resets and hard-resets, but the device would consequently keep hanging in the bootloader.
So for the past few days I've been searching the web and just managed to update the ROM. I was expecting that updating the ROM succesfully would mean my device would boot again, but it still keeps hanging in the bootloader (saying IPL 2.09 SPL 2.15 now, so the update did take place).
Does anyone has any idea whats wrong with my phone? Or how to fix this? Please help.
* bump *
I've been searching further and tried to do a SD dump, but I'm getting the message I don't got enough rights to perform a SD dump. This meens my S200 isn't CID unlocked. Is there any way to CID unlock the device without the need of booting into WM?
The solution to your problem
Hello, if you are having bootloader screen right after starting your mobile (prophet) check if your camera button is depressed since i had the similar problem. In my case i had to disassembly the phone in order to fix it. Right after fixing the button it worked fine
hi syzzer,
i really feel with you - why? - i have the exactly same problem. after i tried to upgrade my rom from o2-germany to another one the device isn't starting anymore and hangs in the beautiful-colored bootloader. and now, if i just even want to re-install the same or another rom, doesnt matter which one, the s200 wont start again. i think this is a really unlucky situation for us to stand alone with our weak pda =) hoping for more help, otherwise we have to take up our warranty and try to get it fixed by the store we did buy it (if a rom-update damage is still in warranty )
good luck
budy!
awechris said:
Hello, if you are having bootloader screen right after starting your mobile (prophet) check if your camera button is depressed since i had the similar problem. In my case i had to disassembly the phone in order to fix it. Right after fixing the button it worked fine
Click to expand...
Click to collapse
in my case, the camera button is not pressed in... i truly don't know what to do hopeless? mhm?
greets!
budy!
hello Syzzer
I have the same problem, but i make a soft reset and it works.
Camera but + Com Button + Power
Wait until message appear.
You Get the message : For Hard reset press send
If you choose other key the system boots normaly.
I had already tried all your suggestions, but nothing seemed to work.
About a month ago I bought a Trinity. In the mean while, I forgot I had put my S200 in my bag and carried it around for a month. When I found it a week ago and started pressing random buttons, it suddenly booted and has been working ever since! The problem has gone as mysterious as it came. I can only imagine there was some hardware failure / dirt in my device that caused the trouble and is now gone / moved to some place it does not do harm. Because I already bought a Trinity, I gave the S200 to my brother. He's been using it ever since and did not have any problems. So keep your head up, there's hope!
I m also having the same problem
Now I am having the same problem, no button is pressed, and I can not install the NVID ROM
Actually I can install only a few ROMs, the NVID ROM was working before on my Neo perfectly but, I think it can be because I have changed many ROMs, from a month, actually I have tried different WM6 ROMs and I used NVID ROMs mostly for Step 1.
Now when I install any ROM, it shows a msg some nbf one after 80% or 95%
It can install the pdaviet first step ROM, but now the problem is that it hangs very much and it can not start Wifi, it has stopped working, a few more ROMs i have tried, but the WIFI is completely stopped.
When I press it in communication manager, it will show busy icon for a few seconds and will not start it in end.(I tried it in both WM5 and WM6, same problem, I also tried after soft reset and hard reset, the problem is still there)
Please someone help me out.
hi all,
my jasjar had an error while upgrading to ranju 7.7,
i tried to reset, didn't came back,
hard reset neither,
i went to bootloader mode, i could,
i connected it again to the pc, it showed usb,
i tried to flash to Rom that was working previously it arrives to 7% than stops,
what should i do ...
i tried to flash with official rom, it says that the rom wasn't designed for this model, it has worked before...
please help...
Hi,
if you search in the ranju's thread there's the solution.
You could have the doc corrupted. Simply read the wiki,
you must use mtty to format your device and then reflash the rom you want (with radio rom also).
Had similar problem
upgrading Imate JasJar to Ranju 7.7, only at first it showed as success, then it started behaving funny during customization, then failed to customize, then got stuck on Windows 6.1 green flash screen and eventually refused to budge beyond blue Imate screen with versions info. I tried everything, a few dozens of hard resets returned me to the same problem, removing the battery didn't do much and mtty didn't show USB as available option, so couldn't even use that. I was pretty much stuck solidly and for a while. At my wits end I read that problems like mine are associated with DOC corruption and my JasJar is as good as dead, quite a few people suggested to those who are in the same position to throw their bricked babies away, as there is no economic solution apart from sending it for service where the corrupted chip may be replaced. What do you know, I followed wiki recommendation and entered a boot screen by pressing light power reset, then just flashed back to Ranju 7.6 and my JasJar was brought back to life!!! The update went without a glitch and everything is working fine. I guess I will keep the 7.7 on my O2 and 7.6 on my Imate for now, won't be risking an update anymore on the JasJar, don't think I have much hair left after all the pulling I did trying to bring it back to life. Hope this helps someone in the same predicament
jokove said:
hi all,
my jasjar had an error while upgrading to ranju 7.7,
i tried to reset, didn't came back,
hard reset neither,
i went to bootloader mode, i could,
i connected it again to the pc, it showed usb,
i tried to flash to Rom that was working previously it arrives to 7% than stops,
what should i do ...
i tried to flash with official rom, it says that the rom wasn't designed for this model, it has worked before...
please help...
Click to expand...
Click to collapse
does it turn on at all?
Does the device turn on at all after a hard reset?
Dude, I had a same problem it rectified though, check following of my blog...
http://jay-joshi.spaces.live.com/blog/cns!851D717EDFF14CEC!3258.entry
or
http://buzzdev.net/read.php?40,13307,page=1
Rarest_Kind said:
Dude, I had a same problem it rectified though, check following of my blog...
http://jay-joshi.spaces.live.com/blog/cns!851D717EDFF14CEC!3258.entry
or
http://buzzdev.net/read.php?40,13307,page=1
Click to expand...
Click to collapse
Problem resolved?
Recently, i found a problem with my o2 atom. When i soft-reset my o2 atom, it hangs on that initial blue screen that pops up with the O2 sign on it and will not move beyond that. However, if I reset it for several times, it can start to windows interface successfully sometimes, but it failed for the most times. I have tried to take out the battery and put it back in. But the problem still exists.....
By the way, i did not update my ROM. The ROM is WM5.0 CHT(initial version).
I'll be crazy by this problem
I want to know that this problem is caused by software or hardware and how to solve it ?
Thank u in advance!!!
It is an inherent problem of O2 Roms. Try flashing with a newer ROM. If you would prefer sticking to a XDA Rom, then check out the rom by MWG.
Hi, had a problem flashing my bro in law's Titan.
I unlocked the titan with the titan unlocker by Olipro and flashed with the round 4 reloaded (loaded) rom (dcd 3.2.6)
unlocked fine, installed the rom to 100% rebooted phone and its stuck on the Bell screen. (its after the HTC screen and after the screen that shows versions, which it does show D. version 3.2.6) any ideas how to get it to where i can flash it again?
Does it have a compatible v3.x radio installed as well? I recommend 3.42.40 personally, but just about any v3.x radio will work.
BTC
Tzetsin said:
Hi, had a problem flashing my bro in law's Titan.
I unlocked the titan with the titan unlocker by Olipro and flashed with the round 4 reloaded (loaded) rom (dcd 3.2.6)
unlocked fine, installed the rom to 100% rebooted phone and its stuck on the Bell screen. (its after the HTC screen and after the screen that shows versions, which it does show D. version 3.2.6) any ideas how to get it to where i can flash it again?
Click to expand...
Click to collapse
Ok, solved the problem by pressing the power button, camera button and reset button all at the same time. This of course enabled the bootloader on the phone. installed another rom which gave me the same result, stuck at carrier screen. This is of course because i didnt know i had to upgrade the radio first. Got the phone running again by updating the rom with the one at the HTC website for my carrier.
Now i'm trying to update the radio. there isnt alot of instruction out there, but i did find this http://wiki.xda-developers.com/index.php?pagename=Radio only upgrade instructions Although after following the instructions, the universal rom upgrade tool never connects to my phone. I tried the vista fix here http://forum.xda-developers.com/showthread.php?t=313001 But being that its over 2 years old, i'm guessing its now useless as when i try to update with the files there my OS says my drivers are more current and wont allow me to install them.
So now i'm stuck at the "how to upgrade my titan's radio" stage. Anyone have better instructions? (or can tell me what i'm doing wrong?
what i've done
downloaded radio version 3.42.40 as BTC suggested
downloaded "universalRUU" and extracted it to its own folder
copied the radio's file "TITAIMG.nbh" into the UniversalRUU folder
reset my phone into the bootloader screen
ran the ROMUpgradeUt.exe from the UniversalRUU folder
pressed "next"
it says "checking information on your device" and hangs there forever.
if i press update anyway, it continues to the last screen where i can press "finish" and thats it. nothing happens. which part am i missing? the phone is DEFINATLY connected to windows at that point, so it should be able to detect it, but it doesnt seem like it even tries as there is no system pausing or stuttering like it might be trying to do something.
thanks for the help so far.
Solved the problem on my own, as well as the other couple problems i ran into.
Updated the Titan WIKI to reflect my solutions and clarify some key points.