i just upgraded to O2 latest ROM which is 1.30.xxx. and it wont power up again. After browsing the internet, someone said is the bootloader causing problem. so i checked my bootloader, and it is v1.00 and it should not be a problem. Is any one having the same problem???
or is anyone can teach me how to flash the old ROM wiht a dead xda exec :roll: :roll:
Just a dumb question from me, did you hard reset the device after the upgrade?
Dead exec?
Try to reflash again
its work!!!!
it was the latest O2 ROM (v1.30.162) giving me problem. i have done soft/hard reboot after the upgraded the ROM but it wont power on. So i reinstall the old ROM and it works!!!! Any idea what is wrong with the v1.30.162?
Hi,
I'm facing a problem with my customer O2 phone. It's showing "No Service with "!" mark. I have upgraded everything .. but nothing changes ..
It's a hardware problem or Software problem ??
Thank You
ive got the same problem.... can anyone help please.
You need to reflash using the 'radio ROM.nbf' file.
My magician's radio, stops working after the unit reboots after doing a ROM update. The radio works immediately after the inital splash screen (before the extended rom autorun). After this, the radio doesn't work.
If I skip the extended ROM instal, by rebooting the device prematurely, the radio still doesn't work.
I've tried many different ROM numbers. I've even downgraded to the stock ones that came with the unit.
Any suggestions?
Hint: My radio only works immediately after a hard reset, but not after rebooting using the extended ROM (customization). (aborting the customization, the radio doesn't work anyway).
it could be barred IMEI
What now works for me, is enabling, then disabling 'Flight-mode" on the phone.
Hello.
Had a previous problem with my O2 Atom.. It freezes most of the time, when i tried to soft-reset the device.. it freeze at start-up (at the O2 Screen)..
Ive tried reflashing the ROM (both WM5 - Quanta and WM6 - Master Jiggs) via bootloader, but after reflashing the device, it will also still freeze at "Device clean boot".. I've just reflashed my atom (again) and i cant use it no more
Ive managed to go to Diagnostic Mode, All 5 test went well except for the flash test (failed).. Does this mean i have a bricked atom?
Also, Ive already tried removing the battery and putting it back in after 2 days (well, just to be sure..) but still the same problem.
Please help me bring my atom back to life.. no social life here
Thanks!
Alibot
I'm not sure what the exact problem could be but you could always try flashing with a new/empty SD card with just the ROM you want to use and see if that works.
Hi!
Please someone can help me?
I have a O2 XDA Exec with a SDHC 8GB...
I'm the second or third user that own this device. Because this, I don't know about roms upgrades with precision, but it's running WM5.
All was work fine... But some days ago, it was stopping in a black screen when I perform a simple soft reset...
I tryed remove the battery, all the cards (include the simcard), but the problem still there...
I tryed a hard reset, but the problem still there...
I tryed all that I know, but the problem still there again...
Trouble details:
The O2 XDA Exec aleatory freeze in a black screen after soft reset.
I persists pressing Reset key with some seconds intervals, untill it (aleatory) turn on the screen and load WM5.
The Bootloader and the HardReset screens comes normaly when calleds.
When I perform a hardreset, immediatly happen an freeze without the new system never was loaded before.
I disassembly the device and test the RESET key... there is no problem.
My big suspect is something corrupt in device's bootloader or other "BIOS" program.
I use many PDAs for a long time (8 years ago), but never see nothing like that...
Seed someone something like this before?
How can I solve this problem?
Can someone help me please?
Thanks a lot.
P.S.lease, excuse my poor english...
wfreed said:
Hi!
Please someone can help me?
I have a O2 XDA Exec with a SDHC 8GB...
I'm the second or third user that own this device. Because this, I don't know about roms upgrades with precision, but it's running WM5.
All was work fine... But some days ago, it was stopping in a black screen when I perform a simple soft reset...
I tryed remove the battery, all the cards (include the simcard), but the problem still there...
I tryed a hard reset, but the problem still there...
I tryed all that I know, but the problem still there again...
Trouble details:
The O2 XDA Exec aleatory freeze in a black screen after soft reset.
I persists pressing Reset key with some seconds intervals, untill it (aleatory) turn on the screen and load WM5.
The Bootloader and the HardReset screens comes normaly when calleds.
When I perform a hardreset, immediatly happen an freeze without the new system never was loaded before.
I disassembly the device and test the RESET key... there is no problem.
My big suspect is something corrupt in device's bootloader or other "BIOS" program.
I use many PDAs for a long time (8 years ago), but never see nothing like that...
Seed someone something like this before?
How can I solve this problem?
Can someone help me please?
Thanks a lot.
P.S.lease, excuse my poor english...
Click to expand...
Click to collapse
Have you tried to install another ROM? with a different Bootloader
Battery?
Check the Wiki, there is a lot of usefull info there
Good luck
Hi, orb3000!
Thanks for your very quick answer!
Are there real chance this solve this kind of trouble?
Suggest someone a good, quick and stable WM5 rom to I try?
Are bootloaders upgradibles without need all rom update??
I'm trying understand what is happen. All we knows no erros are acceptable in ROM (firmware) upgrade... so...
Can someone explain to me how is made the XDA Exec (HTC Universal) boot routine??
Eg: In x86 PCs, first it load the bios, the bios load the setting that said to PC where is HD, the bios load the Master Boot Record with partition table, the partition table said to bios where is the active unitie with FAT, the active FAT said to bios where is the boot file, the bios said to processor load boot file to the ram and execute, etc.
Thanks!
wfreed said:
Hi, orb3000!
Thanks for your very quick answer!
Are there real chance this solve this kind of trouble?
Suggest someone a good, quick and stable WM5 rom to I try?
Are bootloaders upgradibles without need all rom update??
I'm trying understand what is happen. All we knows no erros are acceptable in ROM (firmware) upgrade... so...
Can someone explain to me how is made the XDA Exec (HTC Universal) boot routine??
Eg: In x86 PCs, first it load the bios, the bios load the setting that said to PC where is HD, the bios load the Master Boot Record with partition table, the partition table said to bios where is the active unitie with FAT, the active FAT said to bios where is the boot file, the bios said to processor load boot file to the ram and execute, etc.
Thanks!
Click to expand...
Click to collapse
Hi
here you can find one: http://forum.xda-developers.com/showthread.php?t=409966
The other questions I am no the master, so let´s learn form them
Cheers
Thanks a lot all yours!!
I solve my trouble reflashing my WM5 rom...
I used the Jwrightmcps Crossbow ROM Update 2.12.08 WWE, very fast and very stable WM6 rom! Realy a amazing work by our friend Jwrightmcps!
Including, I want suggest here that all those that still suffering in WM5 (living slowly with crashes, troubles, crashes, more troubles and this poor and slow system), try reflash your HTC with a rom like this... my device reborn!! It was dead more now is alive!!! And much more fast and stable! Before it is slowly my old Jornada 720 (206MHz), but now it realy seems have 520MHz!
Thanks a lot for all.
The link for this excelent work is HERE:
Jwrightmcps Crossbow ROM Update 2.12.08 WWE
(Download the apropriate rom to your device, folow the instructions and EnJoY!! Be HaPpY!!)
This rom don't supports 8GB SDHD cards, but download and Install 2 cabs below and it will support it:
CAB01 - SDHC_DRIVERS_FOR_C550_AND_N560_BY_GreateVK_AND_Fre ePK.cab
CAB02 - Signed_Storage_Settings_App.cab
Special thanks to big_quads for this solution!
I face a strange problem on my dopod 818pro after I donwgrade from wm6.5 back to wm5 NVID rom.It take about 5 minuets to boot back to the windows,even thought i did several time of hard reset it is d same too. Does anyone encounter with this kind of problem before? Please advice.
No sifus can HELP???
Finally I solved d problem liao by upgrading back to wm6.5 Build 23053 WWE bikertibi edition.
Help <urgently needed
Hi everyone,
I tried to upgrade my HTC universal from WM 5 to WM 6.5 using the rom provided by xda v1.01 (128MB rom).
I tried to install the upgrade from my laptop but during the process i noticed a sound indicating that the USB connection was lost. Now all i can see in my phone is 'Serial' at the top and 'v1.01' at the top. Aside that, the phone's literally DEAD.
Is there anything I can do about the phone or is it wasted?
Would appreciate any form of response.
Thanks.