Hey guys, I tried to use a 2,5 to 3,5mm jack converter on my S200. The sound was exceptional. Although when i took the eadphones off the phone speaker was muted! I mean I have no sound on the rear speaker nor the phone speaker! I just bought it and I dont it to be broken. What can I do? Btw, if I receive a call or a SMS the phone rings (back speaker) but i cant answer it and I have no sound at all, only by phones
Everibody who has this problem, put the stylus in the jack and take it out, the sound should come back. Stupid but worked
Zero|Cool said:
Everibody who has this problem, put the stylus in the jack and take it out, the sound should come back. Stupid but worked
Click to expand...
Click to collapse
An alternative is to insert and remove the head phone jack a few times.
l3v5y said:
An alternative is to insert and remove the head phone jack a few times.
Click to expand...
Click to collapse
ive tried that, useless. The strangiest thing is that i now inserted the original htc phones and had the same problem again
Related
I lost the loudspeaker-sound in my Himalya. It works using headphones. I think it may have to do with another set of headphone I connected to it, which was not original. Perhaps it put the device on permanent headphone mode. But then again it might not have anything to do with that.
Is there a Himalaya expert in Berlin - Germany who might be able to help me with it? I dread having to send it to the official reapir center, as I expect it to cost a neck and a hand.
Happened to me when I received a call whilst listening to music. I pulled the headphones out before answering the call, and then answered it. I could here them but they cvouldn't hear me. If you plug the headphones in again and remove them it solves the problem. Well it did for me anyway
I tried that. I doesn't do it. It doesn't matter what kind of sound, if Media Player file is played of phone ringing, only the headphones work. I think I need a dotor.
I have read a lot about the problem in others threads. It seems the headphone-jack can get stuck, not making a contact, which normally is being made and which turns the XDA back to speaker mode, when the headphone-jack is pulled out. Hereto:
1- What does that mean exactely? Which part is that, in what part in the on-board jack? If it had been bent out of place, is it possible to bend the part pack (at best without having to disassemble)? (I tried the ramming in and out, no go).
2- I looked at the non-original jack I had used and it is about 2 mm longer than the original. Might perhaps that explain it? Is there a part in the back that could have been bent out of place?
3- If indeed this was the problem (if the jack had been bent out of place, one way or another), would the microphone work? I can record using the dictaphone and the micophone also works during a call.
When we had himalaya's it happened to both of our devices (my wife and I had one each).
It appears the spring in the speaker can come loose. I used to bang mine (pardon the pun) on my palm and sometimes it would start to work. Then we broke the speaker protection shield, and this made it easier sometimes and hard to fix in others.
When I sold it, my friend took it apart as it was out of warranty, and as he is electrically minded, he find the dodgy bit, and soldered it to the device, and now works perfectly.
Yes! Thanks Jasjar. It worked after a bit of beating.
I found a detailed instruction of how to fix it permanently in another thread. Sounds complicated and dangerous but eventually I must do it.
ran2far said:
I have read a lot about the problem in others threads. It seems the headphone-jack can get stuck, not making a contact, which normally is being made and which turns the XDA back to speaker mode, when the headphone-jack is pulled out.
Click to expand...
Click to collapse
Sorry for kicking the topic, but this was the solution for me. I just poked in the headphone-jack with a little stick and tataaaa... my sound is back!
Sound lost problem
Hi all,
same happen to me, the sound stoped working (on my side it had nothing to do with the phone jack).
After the modifaication which is described in this forum i had still the same problem so i solder the loud speaker directly - still same problem...
After some time i flashed the device again, now it works, so on my side it was a software problem...
The device was 3 month out of power, but i think remove the battery and if the sound appears on startup (on first boot) but later not, then flash the os and it will work ...
kr
chw
XDA 2 sound problem...
Hi!
Plese help me!
I have strange problem with my XDA 2.
I bough it 2 days ago. It was in O2 network.
Now when I unlocked it for my network (polish ERA-GSM) I saw that when I'm calling I cant hear anything. Person from the other sight can't hear me too..
XDA have sound becose I used media-player ando other sound stuff, thats why I think that speaker is ok. Microphone is ok too becose I can record animations with sound.
So what should I do now? ;/
Plese help...
Just for reference:
A friend of mine had this 2020, and both Speakerphone and mic were not working.
When somebody called, the ringtone DID sound.
Anyway, bluetooth handsfree worked fine.
All we did was play with the jack, using the stylus! Not even headphones...
And now it works fine!
He says he'll never put phones on it again... lol
cu around!
Looking for more Info
Hi, please help me find which points in the MDAII Motherboard can I solder to disable the headphones and get the audio and mic back to the MDA.
After a while my headphone-jack is broken from the motherboard and now I only have the pin outs in it.
The device is working perfect, and I can use bluetooth headphones. I just don't have audio in the speaker and no mic without bluetooth.
I hope someone can tell me which of the red points en the picture can I solder to disable the headphones.
I just want to do this temporally until I get a replacement spare part for it.
Thanks
EDIT: 12-12-2007
I got it. Just joining 1 and 3 and you will get audio back to the PDA disabling the headphones jack.
Thanks anyways for reading this..
Did you find out what all the mboard pins are for the jack?
I have a dodgy jack and would like to take flying leads of the mboard jack to an external (easily changed) inline jack. Does any know what the 1 to 6 pins correlate to. I would like to still switch the audio via the external jack. Not bothered about the mic.
TIA.
hi i have a spv m5000 (htc universal) with jcwrights 2.02.02 rom is was working today worning but in the afternoon the sound does not come, when i use headphones it works perfectly i havent dropped the phone or nothing could someone please help thanks
Plug in and plug out the earphones several times to re-route the sound to speakers.
PS: play some song on WMP so that ASA sound comes from the device to make yourself aware that the things are back to normal
hi it quite worked when i put the earphones all in theres no sound but to the earphones but wen its taken out no sound however when i put the earphones when its in the middle it plays perfect please help me anyone with instant messaging will please help i need it its not a loose wiring i know but please i will wven pay if you help me to get it up and running before wednesday thanks
It's your headphone jack
Theres a problem wit hyour headphone jack, i think the bit inside that works out if there are headphones in the device or noot has got stuck to thinking there are always headphones in the slot.
The solution to this is to put the headphones in and out til lyou get sound back, maybe do a soft reset. I dunno I started to get it on my last uni but i had that replaced due to scren failing.
i have no idea?, i put it in and out maybe 100 time it still doesnt work please help me please will pay donation to the soloution which works! please
hello, i have sent it for htc repairs hopefully some result has anybody ever sent it for repairs
hi samzurai,
I have exactly the same problem as you. did you manage to solve it somehow?
I had same problem solved it this way.
when sound does not start put stylus in the headfone jack turn it a bit and take it out
that should get your sound again
grifone said:
I had same problem solved it this way.
when sound does not start put stylus in the headfone jack turn it a bit and take it out
that should get your sound again
Click to expand...
Click to collapse
Same thing happened to me...listened to WMP through headphones...take the headphones out & NO SOUND!!! I could put the headphones back in and hear sound, but NO sound on the phone or sound from WMP w/o the headphones. I G-E-N-T-L-Y moved the 2.5 jack in and out of the audio jack and the sound almost instantly came back...repeat as necessary!
Hi ppl! Let's see if I can express my problem!
My wizard is having this problem:
The inside speaker doesn't work during a call, only loud speaker(hands free) works, or by handset or bluetooh speaker! Does any one have this kind of problem?
I've send this one to warranty but, i've got a stupid respond from HTC:
"....Dear Sr. You have used an illegal software that damage you HTC motherboad...". Uaaauuu I've never used any 3rd software on this one. after received this answer Yesterday I made the first update to this phone (install the XDA Mobile 6 Release 3) but the problem still there.
Does any one have some ideas?
Now a stupid question ? how many speakers does wizard have ? 2 ?
Thanks for your time.
Rui
A while ago i had a similar problem where the phone thought my wired headset was plugged in and would not send the sound to the speakers... Only the headset, so i put some music on and plugged the headset in and out pretty fast until the sound came out the speakers in the phone. I think it had something to do with the switch inside the jack port that controls where the sound goes. Anyway that fixed mine but im not sure whats happening with yours.
The wizard has 3 speakers
2 Stereo speakers, one on each side
1 Speaker for calling in between the flashing lights
intheloft said:
A while ago i had a similar problem where the phone thought my wired headset was plugged in and would not send the sound to the speakers... Only the headset, so i put some music on and plugged the headset in and out pretty fast until the sound came out the speakers in the phone. I think it had something to do with the switch inside the jack port that controls where the sound goes. Anyway that fixed mine but im not sure whats happening with yours.
The wizard has 3 speakers
2 Stereo speakers, one on each side
1 Speaker for calling in between the flashing lights
Click to expand...
Click to collapse
Thats very true, if headset is used often or used much of the time,then the clips inside the jack port get over stretched and won't come back to it's original place after the input jack of headsets is plugged out,thus,not allowing to pass through the voice to the speakers.
Hi again! thanks for your replay!
Yes it was true about the mini jack! A good cleaning have solve 50% of the case!
The sound now cames out from the 2 stereo speakers ! But not from the speaker for calling!
I'm start to suspects from the speaker! Is it hard to dismount the wizard ???
Regards ,
Rui
zabardast_1 said:
Thats very true, if headset is used often or used much of the time,then the clips inside the jack port get over stretched and won't come back to it's original place after the input jack of headsets is plugged out,thus,not allowing to pass through the voice to the speakers.
Click to expand...
Click to collapse
THANK YOU!!!
Thanks guys. Had the same problem and the cleaning seems to have helped for now.
Hi everyone...
I just pulled out my headphone plug and now I can't hear any sounds over the Prophet's speakers - No ringtones, no system sounds, nothing. Not even the other person when I call someone...
Still works over headphones though...
So what's wrong? Is my headphone jack screwed?
Thanks in advance...
That is a commun problem with this equipment.
The spring on the plub doesnt work right with the time.
One solution is to to plub and unplug several times and then test it if it the the problem has been solved.
Prepare to buy a new headphones plug.
Thanks for the reply... so you're basically saying, there's a mechanical problem with the headphone jack? That's strange, because when I call the phone from a different one the ringer works fine. But when I call someone else from the Prophet, I can't hear a thing...
I think that the problem lies with a little metal pin/pad inside the jack hole on the prophet.
When you put the jack in, it depresses this little pin, and deactivates the speaker, earspeaker and microphone, and transfers that over to the headset. After a bit of usage, it appears that it can get stuck when you remove the jack, disabling the phone's speakers etc.
I find that shaking it/hitting it/ramming the jack in and out, whilst building up frustration, can remove stress. It also can have some effect on the problem.
I'm just waiting it out until my contract ends, and i get a new phone.
EDIT: Ah, and the prophet naturally rings out loud aswell when you have the headset in, so that's why you can hear it.
I had the exact same problem, I sloved it by rotating a pin inside the headphone jack and it is sloved the speaker worked. I inserted the headphone and it work thus i took it off and prophet worked as normal.
wish good luck 4 u
Hi!
A few days ago i bought a mda vario 2. The problem is that i have no sound. When some1 is calling i have only vibrations or when i want to listen a song, watch a film etc. I did hard reset a few times. I tried diffrent roms but it doesnt help. Cleaning mini usb gives nothing. I have wm 6.1 proffesional. Please help me sorry for my english im from poland
Yes i had the same thing when i got my hermes, it was my first WM device so i wasnt familiar with it. If your case is the same as mine then you have your sound profile set to "Vibrate". You can change it either by taping on the little loudspeaker icon on the top of your today screen and selecting "On", or if you have the HTC Today plugin, by selecting "Profiles" and then "Normal" mode. Hope this helps
But i have "normal" profile with sound on. Also when i try to see a video or listen mp3 files i dont have sound
adachu59 said:
Hi!
A few days ago i bought a mda vario 2. The problem is that i have no sound. When some1 is calling i have only vibrations or when i want to listen a song, watch a film etc. I did hard reset a few times. I tried diffrent roms but it doesnt help. Cleaning mini usb gives nothing. I have wm 6.1 proffesional. Please help me sorry for my english im from poland
Click to expand...
Click to collapse
There are several threads on sound problems here. Do none of them fit your situation?
Is it just the rear speaker that has no sound?
Do you get sound using the headphones?
Could it be that the Rear speaker push on connector needs pushing back on?
http://forum.xda-developers.com/showpost.php?p=1376254&postcount=2
Mike
mikechannon said:
Is it just the rear speaker that has no sound?
Do you get sound using the headphones?
Could it be that the Rear speaker push on connector needs pushing back on?
http://forum.xda-developers.com/showpost.php?p=1376254&postcount=2
Mike
Click to expand...
Click to collapse
I dont know if only rearspeaker has no sound i dont have sound in anything in my hermes. Idont have headphones ;/ i have only nokia bluetooth set? I cant find 4ed screw.
adachu59 said:
I dont know if only rearspeaker has no sound i dont have sound in anything in my hermes. Idont have headphones ;/ i have only nokia bluetooth set? I cant find 4ed screw.
Click to expand...
Click to collapse
OK, but if someone phones you I know you do not hear it ring BUT can you hear their voice in the front speaker?
Mike
I can talk normally.
Try the info for new members http://forum.xda-developers.com/showthread.php?t=325748 . I had the same issue and had to re-attach the speaker plug.I checked this out by gently squeezing the unit below the speaker about 2cm down, it would make the connection then quit sound again. When I removed the back case (not the battery cover) I saw the plug was loose. Follow the instructions in the Hermes manual (from the post) carefuly.
How to unscrew 4ed screw under "void" sticker??What is "void" sticker for?
adachu59 said:
How to unscrew 4ed screw under "void" sticker??What is "void" sticker for?
Click to expand...
Click to collapse
If you remove the void sticker then the Warranty becomes useless. It is supposed to stop you dismantling your phone.
So, if you have a warranty then use it. If you have NO warranty then use a a Torx No 6 screwdriver to remove the screws. (Just peel off the sticker, it will break up into little pieces).
Mike
i had same problem but i upgraded my rom to the v7 blue calm and now it works perfectly..i also have vario 2 but my warranty was voided long time ago lol if doesnt work theres a guy who made a website detailing instructions on how to fix it
I am having a sound issue, but it's pretty unique.
My rear speaker works fine if I'm trying to use it for the speaker phone, but it won't work in any other application. For example, I cannot play songs from windows media player, it won't play any ringtones when I receive a call.
I tried plugging in the USB headphones, and it's exactly the same. Works for the phone, not for anything else.
HOWEVER, with a bluetooth headset, I can play songs just fine. This leads me to believe it's a software issue but I can't pinpoint what it could be. Anyone have any ideas before I hard reset this bad boy?