Dear all,
I have a HTC TOUCH CRUISE
I tried to change the ROM with ROMupdateutility.
I had a SFR ROM
i had a problem during the update and now i have a screen with red green blue and white line ...
I can read POLA 100 SPL 1 25 0000 CPLD-2 RUUNBH
When i try to update he put 0% then error connection ...
Can you help me
Rgds
Hi, you must install first the hard-spl by olipro.
Guide
http://forum.xda-developers.com/showthread.php?t=381600
Related
I have HTC 4350 (Sim Locked) and i run WM6 utility with CID unlock (ASerg19). After the upgrade is completed 100% , the device is freezed on a green screen and stopped. if i enter bootloader mode (Trying to recover to Original ROM WM5) it gives me 4 Colors Screen with IPL 1.08.0001 , SPL 1.08.0001 . And the upgrade process halt on 0% and the ROM Utility from PC exits with an error [300]
Plz need your advise urgently
Thanks
Maged111 said:
I have HTC 4350 (Sim Locked) and i run WM6 utility with CID unlock (ASerg19). After the upgrade is completed 100% , the device is freezed on a green screen and stopped. if i enter bootloader mode (Trying to recover to Original ROM WM5) it gives me 4 Colors Screen with IPL 1.08.0001 , SPL 1.08.0001 . And the upgrade process halt on 0% and the ROM Utility from PC exits with an error [300]
Plz need your advise urgently
Thanks
Click to expand...
Click to collapse
Find an ruu suit your cid
http://forum.xda-developers.com/showthread.php?t=342273
I have HTC 4350 and i run WM6 utility with CID unlock (ASerg19).I closed flasher and only console program worked with my ppc, the device is freezed on a white screen and stopped. if i enter bootloader mode (Trying to recover to Original ROM WM5) it gives me 4 Colors Screen with IPL 1.08.0001 , SPL 1.08.0001 . And the upgrade process halt on 0% and the ROM Utility from PC exits with an error [300]
i have only sunday to recover. Plz help!
P.S. I tryed all ROMs what i downloaded
I have russian CID (HTC__A07) and ROMUpdate doesn`t want to flash
how do u know what cid you have if its stuck in boot loader?
its an htc model i downloaded the rom fromhtc but it reboots after 2% and shows error ( invalid model id ) error 244 thats really odd i dont get it.
any help would be great.
thanks
My problem is, my htc touch elfin? (mda touch elf0300) stuck in bootloader-mode. Is there any Solution to get it working ?.
IPL : 2.26.0002
SPL: 2.26.0000
ELF0300
After 2 % crashed the rom update. I can´t the uspl until again because, the device wont connects to active sync.
Need Help
Thank you
.
i have same problem too, but
IPL 1.16.0002 and SPL 1.16.0000
I also have this problem
IPL 1.16.0002
SPL 1.16.0000
Stuck on bootloader screen none of the usual reset options seem to work and doesn't show up when plugged in to usb port
Help
Thanks Si
Hi,
I have htc polaris (pola100)
but I unwillingly flash spl version 3.13.000 but now doesn't go anythink flash,
don't go flash anythink other spl version (1.25.0000, 1.28.0000)
Please anybody help me.
You had to flash the original ROM of your Polaris before flashing the Original SPL.
Can you get the tricolor screen?
I have original spl but after I flash hard-spl v2 and flash not original rom,but this rom was very bad.
So I would back my original wm6.1 rom htc, so i find original three original spl (1.25.0000 1.28.0000 3.13.0000) I flash spl 3.13.000 but now doesnt flash anythink anythink spl and anythink rom
please and now?
(ps: sorry my english is bad)
but yes a see my bootloader , i see red blue green and white color
on the left side is write:
POLA100
SPL-3.13.0000
CPLD-2
and the right side is write:
RUUNBH
okay, I understand.
Isn't there any ROM flashed?
i tried rom:
3LIT3_VI_Full
udK_Syrius_R7_WWE
c_shekhar_Pola_WM3.13.755CS_Build20755_Public_Final
and original rom htc wm6.1
But all roms frozen near 0% on htc display
I think you've bricket your phone
but on this list:
http://forum.xda-developers.com/showthread.php?t=351964&page=28
he have same problem as I.
mtelleria mtelleria is offline
Junior Member
Join Date: Jun 2008
Posts: 6
Default Problems installing HardSPL
Hi,
I have installed the last official version on WM6.1 on my htc, now i want to install one custom rom from this forum.
I tryed to istall first HardSPL, but i don't know why, the process get stuck at 0% of the istall and never continue.
In the 3 color screen appear:
POLA100
SPL-3.13.0000
CPLD-2
Someone can help me?
Thanks
____AND THIS ALSO BUT OTHER SPL:
he write:
"donchischotte" donchischotte is offline
Junior Member
On the screen I read:
-------------
RUUNBH
POLA100
SPL-1.28.0000
CPDL-2
--------------
Here is what I do and what happens when I try to use HARD-SPL V2:
1) I connect the USB cable and the writing on the device changes from "serial" to "USB"
2) I run romupdateutility
3) I check "I understand..." + next
4) I check "I completed..." + next
5) on the PC a message "verifying the information on your PDA phone, please wait" appears and after a while the device switches to a screen with a progress bar at 0%, while on the PC the following message appears:
--------------------------------------------------------------
Current information about your PDA phone:
Image version:
Select from below:
UPDATE Update the current ROM version
--------------------------------------------------------------
6) I click UPDATE and the following appears:
------------------------------------------------------------------
Verify that you want to update the ROM version:
From:
Image version:
To:
Image version: OliNex-2.20
------------------------------------------------------------------
7) I press "next" twice and I get the message "updating the ROM image on your PDA phone", but the progress bar is stuck at 0% and after a minute or so i get the ERROR[262] : UPDATE ERROR
I tried usinr both Vista and XP, with or without MicroSD and SIM card. It's always the same.
I tried flashing different SPLs (even the two original ones) with the same problem. If I try to flash a ROM I get the ERROR [294] : INVALID VENDER ID"
after 1% progress.
I HAVE SAME PROBLEM
I think you must wait Olipro or another chef here to say you how to refalsh SPL with 2.40 version in command line
You can try to flash you original ROM via SD-Card.
what is the solution ? I have the same problem with :
SPL-3.13.0000
I can't flash ...
Now its workhttp uff;-)
I flash my polaris 10* and all of a sudden work.
i HSPL my HTC Pharos and after HSPL successfully done my htc stuck at bootloader, so i update it with ROM but still on bootloader screen, so i update it again with official rom so still same plz help me how can i solve this problem
thanx in advance
can anyone help me plz
i am in trouble
any body here
plz help me
plz anyone can help me or not?
hey iwant to help..
but i am not understanding whats u saying..??
thanx for your reply
i have change language from norwigian to english but now my htc stck at bootloader screen (tri color), now i can't update any rom, please help me
shahzaadbutt said:
thanx for your reply
i have change language from norwigian to english but now my htc stck at bootloader screen (tri color), now i can't update any rom, please help me
Click to expand...
Click to collapse
When you plug your pharos to usb and run the ruu aplication is the official rom
loading or not?
When you switch your unit off and then press and hold camera button and press
power button do you get something on your screen or not? At this point you should have connection with your PC and update should start, when you run
ruu update.
when i run the update ruu application its start but after 2% its give me error
ERROR 270 UPDATE ERROR
i can't update it now, and its stuck on bootloader screen (tri color), on screen show this
ONBL 1.11.0000
SPL 1.11.0001
one question: ARE YOU SURE U USED A ROM OF THE PHAROS ROM DEVELOPMENT FORUM?
shahzaadbutt said:
when i run the update ruu application its start but after 2% its give me error
ERROR 270 UPDATE ERROR
i can't update it now, and its stuck on bootloader screen (tri color), on screen show this
ONBL 1.11.0000
SPL 1.11.0001
Click to expand...
Click to collapse
I think that you have to try official pharos rom.
When you press and hold both buttons directly under the screen
and then power button, you will get reset to factory setting option.
Here is a link how to restore your pharos:
http://forum.xda-developers.com/showthread.php?t=458965
There is missing nbhextract in first lot of downloads, but when you scroll
down the page, you'll find it there.
Here is a link to official English pharos rom:
http://forum.xda-developers.com/showthread.php?t=394721
ojejoe said:
I think that you have to try official pharos rom.
When you press and hold both buttons directly under the screen
and then power button, you will get reset to factory setting option.
Here is a link how to restore your pharos:
http://forum.xda-developers.com/showthread.php?t=458965
There is missing nbhextract in first lot of downloads, but when you scroll
down the page, you'll find it there.
Here is a link to official English pharos rom:
http://forum.xda-developers.com/showthread.php?t=394721
Click to expand...
Click to collapse
i have already try this rom but after 2% give me error
shahzaadbutt said:
when i run the update ruu application its start but after 2% its give me error
ERROR 270 UPDATE ERROR
i can't update it now, and its stuck on bootloader screen (tri color), on screen show this
ONBL 1.11.0000
SPL 1.11.0001
Click to expand...
Click to collapse
Hello Brother,
Did u flashed hardSPL first or the rom directly????As the SPL is in your phone is not patched "Hard SPL".........Hard SPL sould look like "SPL 1.11.00MOBIZ"....So thats the problem!
Hard SPL was not flashed successfully!SO that was the problem!
BR
have a HTC Athena x7500.
Im stuck in bootloader.
Wend I power on the device it goes directly to bootloader and
the screen say :
ET \ Njq
IPL - v1.00
ET \ Njq
SPL- v1.20. Olipro
USB( wend is connect )
serial ( wend is unconnect )
I dont remember what it was befor I try to flash a WM 6.5 rom on it.
It as a WM 6.1 in Portuguese Rom befor my attent.
I cannot power off the device by pressing the button but have to take
the battery.
I already try to change the rom, the SPl and put everything inside just
to try to move from were I am but no results.
Began to update but ends or in 1% or in 7% and loose the connection.
The device connects to the PC but in PC in WM device center nothing happens.
I try Win7 and also XP.
I went to HTC site to download the official portuguese ROM but there are no
ROM to download.
So I´m dead on the water.
I will apreciate very much any kind of input that take me out
of were I´m now.
I´m not a expert as you already notice.Please keep it simple.
Thank you
stuck in bootloader. Help needed.
stuck in bootloader. Help needed.
have a HTC Athena x7500.
Wend I turn on the device, it goes directly to bootloader and
the screen is:
ATHE 100
IPL - v1.00
ATHE 100
SPL-v3.05.0000 OR my old spl spstuck in bootloader. Help needed.l is 1.10
I have tried to change the language of my athena and then he died :spanish > fransh
USB (wend is to connect)
series (wend is unconnectable).
I can not turn the unit off by pressing the button, but must take
the battery.
I have tried with hardspl its not working
I want a solution in the forum xda-develop it says my q must upgrade to the rom of espana oficial
After downloading the rom:Advantage_HTC_SPA_2.21.412.1_1.50.00.00_Ship
I tried to upgrade to this rom May j has a mesage on my athena screen:
found spl v1.10
dowload Spl before v3.05 is not allowed!
I tried to update it with the sd card i have the same mesage
upgrade with athenaUnlucker not work
upgrade with hardspl v7 not work
upgrade with CheetahUnlocker not work
upgrade with athena wraper not work
J have explored ruu_signeg.nbh with notepad jai entered the signer spl 1.10 I know if c is vrait or name
I believe there is a problem in the image rom saved in my athena rom
what I see on the screen of my athena is the spl 3.05.0000
The real spl is 1.10.0000 there is confusion in my spl
is what I can fix this problem with mtty
so if possible please guide me
sorry for my bad Englis
thank you in advance
My email: [email protected]