I have browse the wiki, and learned that "info 7" command in mtty will show me the bootloader info, so I try it on my device.
In mtty , it says
---------------------------
HTC Integrated Re-Flash Utility, Common Base Version : 1.51d
Device Name: HERM100, Bootloader Version : 2.10.Olipro
Built at: Apr 22 2007 13:32:26
Copyright (c) 1998-2007 Modified By Olipro - Hard-SPL
CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x5
--------------------------
I notice the device name is HERM100, but I always thought of my device as a HERM200 before, cauz 1) the bootloader( tri-color ) screen says HERM200 2) A white paper near the SIM card slot says HERM200 too.
But I has seen some post saying that my device (Cingular 8525 ) should be a "HERM100 and CID is ......" ,because of the bootloader screen and the paper said the same, I just ignore the post, thinking may be my device is just some new born that has not been addressed in that post. Now I wonder...................
What this number actually mean?
The differences between Herm100 and 200 are just cosmetic... have a look at my signature... my phone is a mixture of the two.. so guess mines more of a herm150 lol
Related
I followed the instructions on http://opencodesolutions.com/~ronswens/Tutorials.htm
I am damn sure that my SDA has SuperCID and SPL 1.01.0109 instead of the original SPL 2.x. The tri-colour screen now shows:
Typhoon IPL 1.00
Typhoon SPL 1.01.0109
Typhoon IU
USB
... which should be correct.
Now I'm stuck on the last few steps which involves using the Multi-Port TTY via USB. This is what I get:
| c:\wm5.bin
Invalid command : | c:\wm5.bin
For a help screen, use command ? or h
Cmd>| c:\wm5.bin
Invalid command : | c:\wm5.bin
For a help screen, use command ? or h
Cmd>
Am I doing something obviously stupid?
My T-Mobile SDA has the latest German T-Mobile ROM (12/2005) from https://after-sales-service.t-mobile.de/eg_...obile/t_sda.htm
Please help!
It turns out that it WAS something really silly:
The "l" before the file path (c:\xxx.bin) is a lower case of "L", not a capital "i".
:lol:
hello everyone,
I recently bought a locked Qtek 9100 (SPV M3000/HTC Wizard) and I was trying to unlock it using lokiwiz v0.2. It went through all the steps without any problem, but one... it was still sim locked!
Maybe because my phone is a new version, as it had Feb 06 as its original date... I don't really have any clue.
As this didn't work, I tried to find out in Google if I could find any unlocking code, even if I had to pay 30 euros for it, as that free tool didn't work it out for me.
I used www.gsmliberty.net, paid for it, followed all their instructions - again, everything went perfect - and in the end... ... my phone is not working anymore!... It doesn't even get to the Windows Mobile Logo...
It shows HTC logo and the provider logo, but then reboots and keeps going on this cycle as long as the battery lasts.
I've tried to hard reset, but it stays all the same! I do everything as I have found out in every forum that has some information about it, and it still can't get out of this rebooting cycle...
Can anyone help me on this?
I fear that it had some kind of advanced protection against known unlocking tools and now its ruined for good
Please tell me that we can work this out! The phone was working perfectly before, when I inserted a SIM card that it allowed (from the phone's provider...)
Any help will be most welcome!
Cheers
Sorry to hear of your problems. Please tell me the details of the rom including the ipl and spl numbers. Is the rom a qtek one? - your post is confusing.
I would try reflashing the device with the original rom as the format has failed to do anything.
Download rom from here ftp://[email protected]/Wizard/Roms/Qtek/ password is xda.
To get to the bootloader screen to do this, turn off your device then press and hold camera button and then power on. You should then reach the multicolored bootloader screen. Connect to pc using usb cable and you should see usb in bottom left of screen. (the device does not need to be activesynced to flash rom) then start exe on pc and the device will reflash.
meschle said:
Sorry to hear of your problems. Please tell me the details of the rom including the ipl and spl numbers. Is the rom a qtek one? - your post is confusing.
I would try reflashing the device with the original rom as the format has failed to do anything.
Download rom from here ftp://[email protected]/Wizard/Roms/Qtek/ password is xda.
To get to the bootloader screen to do this, turn off your device then press and hold camera button and then power on. You should then reach the multicolored bootloader screen. Connect to pc using usb cable and you should see usb in bottom left of screen. (the device does not need to be activesynced to flash rom) then start exe on pc and the device will reflash.
Click to expand...
Click to collapse
Thank you for your help!
My ROM version is: 2.18.7.2 PTG (15 FeB 06)
IPL: 2.18
SPL: 2.18
I also have this numbers, which I wrote down before the phone got ruined...
Radio Version: 02.10.10
Protocol Version: 413.1.03
ExtROM: 2.18.7.9161
Which of the files in that FTP should I download?...
Looks like your rom is portugese so this will be the one
ftp://[email protected]/Wi...digy_2180702_21807102_20710_QTEK_PTG_Ship.exe
Perfect! Didn't want to do anything wrong this time.
I'll do it tonight, when I get home. Hopefully this will turn it around for me...
I'll let you know.
The least I can do is to say THANK YOU!
You have no idea of how much you can to to make the world a better place.
Thank you so much!
If there's anything I can help this forum in, please do let me know, I'll be glad if I can somehow pay back this enormous piece of advice.
hveiga said:
The least I can do is to say THANK YOU!
You have no idea of how much you can to to make the world a better place.
Thank you so much!
If there's anything I can help this forum in, please do let me know, I'll be glad if I can somehow pay back this enormous piece of advice.
Click to expand...
Click to collapse
No problem glad you got it sorted. I like to help (this is what this FORUM is for) and would hope that it does make a difference. Best way you can help is learn, learn, learn and then help, help, help others. The helpers in the forum seem to come and go so i suppose there is a shortage, most come for info and advice. I enjoy posting helps me relax lol thats why i have over 1000 posts - must be well chilled out by now :wink:
btw do other sims work in your device now - if not ask for your money back!
dun know
hi guys i need help here i'm using spv m3000 with french langueage
i did follow as what told in this part (Download rom from here ftp://[email protected]/Wizard/Roms/Qtek/ password is xda.
To get to the bootloader screen to do this, turn off your device then press and hold camera button and then power on. You should then reach the multicolored bootloader screen. Connect to pc using usb cable and you should see usb in bottom left of screen. (the device does not need to be activesynced to flash rom) then start exe on pc and the device will reflash.)
one thing i dun get is what is exe and where to find please help me
my ipl is 1.03
spl 1.03.0000
os 1.3.1.4
exe is the RUU (RomUpdate Utility) icon in the Rom you downloaded,just run the RUU,it'll start to flash.
hi thanks for ur info i did try to flah the rom ruu but it cannot
flash the rom is there anything else i forget to do /
i did follow all the instrution where i can get the upgrade rom for french version for this pda phone
btw i'm using window vista
chanra said:
hi thanks for ur info i did try to flah the rom ruu but it cannot
flash the rom is there anything else i forget to do /
i did follow all the instrution where i can get the upgrade rom for french version for this pda phone
btw i'm using window vista
Click to expand...
Click to collapse
Vista is still not compatible for flashing,use winXP,its highly recommended and doen't give any problems.
hi thanks alot for info
i did flash wt english rom i use as what u told ( winxp)
thanks alot i wont forget ur help
(zabardast_1)
chanra said:
hi thanks alot for info
i did flash wt english rom i use as what u told ( winxp)
thanks alot i wont forget ur help
(zabardast_1)
Click to expand...
Click to collapse
Thanz!
It was my pleasure to help you,glad you got it working
I have problem n unlocking M3000
I have problem in unlocking SPV M3000.
IPL 2.16
SPL 2.16
meschle said:
Looks like your rom is portugese so this will be the one
ftp://[email protected]/Wi...digy_2180702_21807102_20710_QTEK_PTG_Ship.exe
Click to expand...
Click to collapse
i try to download from link but ask for FTP pass !? what is ?
Hi am new here,
can i updat my device ?
i like to improve the GUI of my pocket pc ,ist possible?
now my device running wm 5 ,can i updat for wm 6?
my device is Qtek wizard200
and more as follows.
suggest me ...thank u
22/09/09 12:02:51
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: .................
=> Bootloaders:
IPL: 2.18.0001 (G4 device)
SPL: 2.18.0001 (G4 device)
Built on Feb 14 2006 at 18:47:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14955.2.3.0)
ROM: 2.26
Registry AKU: .2.3.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.26.10.105
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
8fb7d682 - 60.63M (0x3ca0000)
ee9e4266 - 9.99M (0x9fd800)
4ea9d13a - 43.24M (0x2b3e000)
cfb25f96 - 50.95M (0x32f4000)
4fb25f42 - 2.94M (0x2f0000)
0fb25fba - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000813902052e1c1780140406da
Key Index: 82
qtek wizard upadting
Hi am new here,
can i updat my device ?
i like to improve the GUI of my pocket pc ,ist possible?
now my device running wm 5 ,can i updat for wm 6?
my device is Qtek wizard200
and more as follows.
suggest me ...thank u
22/09/09 12:02:51
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: .................
=> Bootloaders:
IPL: 2.18.0001 (G4 device)
SPL: 2.18.0001 (G4 device)
Built on Feb 14 2006 at 18:47:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14955.2.3.0)
ROM: 2.26
Registry AKU: .2.3.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.26.10.105
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
8fb7d682 - 60.63M (0x3ca0000)
ee9e4266 - 9.99M (0x9fd800)
4ea9d13a - 43.24M (0x2b3e000)
cfb25f96 - 50.95M (0x32f4000)
4fb25f42 - 2.94M (0x2f0000)
0fb25fba - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000813902052e1c1780140406da
Key Index: 82
I've put my trinity in bootloader startup. But what i have to do to read the CID Locking ???
Thanx
EDIT : Ok i finally get the CID Code Sorry for my post
HTCSHTC__405L””'HTCE
HTC Integrated Re-Flash Utility, Common Base Version : 1.51b
Device Name: TRIN100, Bootloader Version : 1.06.0000
Built at: Oct 19 2006 20:31:29
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x41129200
Main CPLD version=0xA
Main Board version=0x5
Hi to all. I'm a new person in this fantastic forum. Before yesterday i'm just visiting and reading, but now i need your help
So, I have a Wizard with T-mobile logo on it. Display has been changed, 'cause the original was broken. New display has been buyed from *-bay. Both displays are the same. When put the new display in the Wizard, everything looks fine, except the 8-bit color on the skreen ;( . Last night i read and make step by step things in this Thread: http://forum.xda-developers.com/showthread.php?t=298613 , but i need to stop on step G3.4 - i have a success update from step G3.3 with CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE, but when i start the Wizard_Love_2.26.10.2_WWE_Novii_CF2, there is an error - 206 (on italian).
After that, i have read the http://forum.xda-developers.com/showthread.php?t=285435 thread, and started again... First update has been successfull (maybe), the Wizard started with Winmobile 5 (WM6 has been installed before starting updates).
That's the specs:
ipl: 1.01
spl: 1.01
rom date 2/02/07
radio: 01.12.10
rom version: 6.0.0.0 wwe
protokol version: 4.0.13.23
extRom version: Empty Extended (before updating)
Now, after 1st update are:
ipl: 1.01
spl: 1.01
ROM:1.5.4.2 WWE
ROM date: 11/8/05
Radio: 01.12.10
Protocol version: 4.0.12.23
------------------------------------------------------------------------
And now... i haven't idea what to do to update IPL and SPL to version 2.xx
and to install WM6 (XDA Mobile 6 Release 3).
Else, I think that the screen has only 8bit color is not a software problem. I think it's from hardware (display).
Else, i have install ActiveSync, but the program did not find any Wizard attached to the computer..
For first update, i connect and started wizard in bootable mode (3 color display, with 'usb' icon down left...
After restart, when starts normally, AS 4.5 didn't find it...
Can somebody explain me in a few simple steps what to do...
Please..
I'm new in this sphere. Sorry for my bad english.
Have a nice weekend to all.
Here -> http://www.snimka.bg/album.php?album_id=234481 <- are 3 pictures from wizard. 8bit color loooooks very very badd
Lattante said:
Hi to all. I'm a new person in this fantastic forum. Before yesterday i'm just visiting and reading, but now i need your help
So, I have a Wizard with T-mobile logo on it. Display has been changed, 'cause the original was broken. New display has been buyed from *-bay. Both displays are the same. When put the new display in the Wizard, everything looks fine, except the 8-bit color on the skreen ;( . Last night i read and make step by step things in this Thread: http://forum.xda-developers.com/showthread.php?t=298613 , but i need to stop on step G3.4 - i have a success update from step G3.3 with CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE, but when i start the Wizard_Love_2.26.10.2_WWE_Novii_CF2, there is an error - 206 (on italian).
After that, i have read the http://forum.xda-developers.com/showthread.php?t=285435 thread, and started again... First update has been successfull (maybe), the Wizard started with Winmobile 5 (WM6 has been installed before starting updates).
That's the specs:
ipl: 1.01
spl: 1.01
rom date 2/02/07
radio: 01.12.10
rom version: 6.0.0.0 wwe
protokol version: 4.0.13.23
extRom version: Empty Extended (before updating)
Now, after 1st update are:
ipl: 1.01
spl: 1.01
ROM:1.5.4.2 WWE
ROM date: 11/8/05
Radio: 01.12.10
Protocol version: 4.0.12.23
------------------------------------------------------------------------
And now... i haven't idea what to do to update IPL and SPL to version 2.xx
and to install WM6 (XDA Mobile 6 Release 3).
Else, I think that the screen has only 8bit color is not a software problem. I think it's from hardware (display).
Else, i have install ActiveSync, but the program did not find any Wizard attached to the computer..
For first update, i connect and started wizard in bootable mode (3 color display, with 'usb' icon down left...
After restart, when starts normally, AS 4.5 didn't find it...
Can somebody explain me in a few simple steps what to do...
Please..
I'm new in this sphere. Sorry for my bad english.
Have a nice weekend to all.
Here -> http://www.snimka.bg/album.php?album_id=234481 <- are 3 pictures from wizard. 8bit color loooooks very very badd
Click to expand...
Click to collapse
You have downgraded your phone to IPL/SPL 1.xx by flashing Button's Rom 1.05.there's no need to flash wizard_love_Rom,instead download and apply lokiwiz02b tool to SIM/CID unlock the phone and then download T-mobile 2.26 and flash to upgrade to IPL/SPL 2.xx for upgrading to wm6.The above guide was written quite a while ago,its better you follow the most updated guide as in the link below:-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Thanks a lot zabardast_1, but I have 1 problem - Activesync didn't find any Pocket, attached to the computer, so i can't make the steps in the tutorial.. the pocket is SIM unlocked.
Lattante said:
Thanks a lot zabardast_1, but I have 1 problem - Activesync didn't find any Pocket, attached to the computer, so i can't make the steps in the tutorial.. the pocket is SIM unlocked.
Click to expand...
Click to collapse
Is your phone working normal,does it load up to OS ? to check the connectivity,get the phone into bootloaders(tricolor screen) connect via usb cable and check if usb appears at the bottom of the bootloaders,if not then there's a connectivity problem,either with usb cable or the mini usb port of the phone.
if the phone works normal and loads OS,then you can even try to use lokiwiz02b or WST tool via BT and CID unlock the phone.
It's normal working, like I said in my 1st post - 8bit color. I think it's from OS, but i'm not sure - i have downgrade form WM6 to WM5, and the problem is still here .
In bootload mode have indication for USB - bottom left on the screen, the battery has charging, but ActiveSync still don't want to find my Wizard..
P.S. Pfffff, I decline to fight with that.... Monday i'll test with other USB cable. Even it charging battery, i think ActiveSync can't recognize the Wizard, because USB cable is failed somewhere,...
I don't know what i think.. I'm tired.... Good night..
If its working normal and it establishes connectivity through usb as it appears in the bootloaders,then,its the AS software,which is not detecting.Assuming you are using winXP,Delete all partnerships/profiles in the settings of the AS or Uninstall As and download the latest version 4.5 and install it,close any Antivirus/Firewall or any other software which might be hindering with AS and let it again activesync.Also remember to uncheck 'Enable advanced network functionality' in the settings...> connections...> usb to pc options in your phone.
Hello again. I try to install 3 versions of AS, but the result is the same - No Connection. reset the wizard 3 times, stop all running software - ICQ, Skype, antivirus, browser... no and no.
When AS looking for device, there is 7 8 COM ports, Infrared (no installed), USB available, but AS can't find my bluetooth...
I have install bluetooth, and make connection with the wizard, but i can't unlock with lokiwiz02b-HTC Unlocker.
Better try on other winXP based pc
I think so, tommorow at work zabardast_1 thanks a lot man.
My farther has asked me to sort his new phone for him, not sure where he got it from but it's a HTC Touch P3450...... I think, and the Windows is in Japanese.
I did some searching and found that I needed a English Windows Mobile Rom and thats where all the problems started.
1. I cant Hard Reset the phone. I hold the 'talk' and 'end' buttons while reseting and the phone just boots into the Windows. (I do hold the buttons down)
2. I cant get the Bootloader Screen, the TriColour screen. I downloaded 'enable-rapi' and followed the instructions but the phone always boots into the Windows.
3. I downloaded 'Touch3G_2.33.CO2.V33_host_by_mu' which I belive to be an original Rom, WM6.0. When I run 'ROMUpdateUtility' it goes through until it displays 'Verifying the information on your PDA phone' but the space on the next screen where the information about my phone should be, is blank. I click 'next' and the software says it going to copy to Rom over and to wait about 10 mins, and then the USB Connection drops. This happens EVERY time.
I also downloaded a 'device_info' program but I got these results
HTC Touch device information - by dsixda
Touch version : Unknown
Device ID : Unknown
CID : Unknown
IPL : ÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
SPL : Unknown
ROM Version : Unknown
ExtROM Version : None
Operator Version: None
AKU Version : 0.5.0
Page Pool (MB) : Unknown
RAM Size (MB) : Unknown
ROM Size (MB) : Unknown
Model No. : Unknown
Part Number : Unknown
MCC+MNC : Not found
IMEI (private) : Unknown
Serial Number (private): Unknown
MAC Address (private) : Unknown
Any help with any of the above questions would be great, or maybe someone who has experienced the same problems.
Hi
There are 2 possibilities:
1 this is a chinese clone, do a search for these 2 words to understand. The clues are you can't hard reset with the normal combination and device info can't recognise it.
2 you bricked your device by not Cid unlocking before flashing the WRONG rom, Touch 3g is another device. If you can still use it normally then it's the first possibility.
BTW you also skipped the most important step before flashing: read carefully the wiki
Good luck
Many thanks Tito12, I have been looking into this a bit more but only managed to comfuss myself more. lol
I dont think its been 'bricked', if I switch the phone on normaly it loads in Windows and works fine - but in Japanese.
I have looked more into the idea of it being a 'cloned Jap WM' but nowhere seems to show any answers on being able to change the installed Rom to another one.
I have also found out that there is a difference between Elf and Elfin, I have been using the Elfin software, so I searched for Elf software and got redirected to the Elfin software.
I tried the CID Unlocking again, the info on the computer screen says its going to restart the phone into BootLoader but the phone resets and loads Windows - Aggghhhh
I also tried to Flash the Rom with a new WM I downloaded but the USB drops just before the Rom starts to install.
Also, you said 'BTW you also skipped the most important step before flashing: read carefully the wiki'. I hate to be a Noob but I have searched the XDA Forums for the answers and even tried the Wiki but still no luck. Is it something Im doing wrong.
Thanks all
Hi
This is the link http://forum.xda-developers.com/wiki/index.php?title=File:HTC_Elf.png
There's no japanese clone, chinese clone is a device that looks like the Elf/in but cannot be flashed with winmo tools. There are a couple threads dealing with it but AFAIK you have to find other ways to change the rom (if they exist).
Do you see IPL and SPL when you are in bootloader?