My farther has asked me to sort his new phone for him, not sure where he got it from but it's a HTC Touch P3450...... I think, and the Windows is in Japanese.
I did some searching and found that I needed a English Windows Mobile Rom and thats where all the problems started.
1. I cant Hard Reset the phone. I hold the 'talk' and 'end' buttons while reseting and the phone just boots into the Windows. (I do hold the buttons down)
2. I cant get the Bootloader Screen, the TriColour screen. I downloaded 'enable-rapi' and followed the instructions but the phone always boots into the Windows.
3. I downloaded 'Touch3G_2.33.CO2.V33_host_by_mu' which I belive to be an original Rom, WM6.0. When I run 'ROMUpdateUtility' it goes through until it displays 'Verifying the information on your PDA phone' but the space on the next screen where the information about my phone should be, is blank. I click 'next' and the software says it going to copy to Rom over and to wait about 10 mins, and then the USB Connection drops. This happens EVERY time.
I also downloaded a 'device_info' program but I got these results
HTC Touch device information - by dsixda
Touch version : Unknown
Device ID : Unknown
CID : Unknown
IPL : ÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
SPL : Unknown
ROM Version : Unknown
ExtROM Version : None
Operator Version: None
AKU Version : 0.5.0
Page Pool (MB) : Unknown
RAM Size (MB) : Unknown
ROM Size (MB) : Unknown
Model No. : Unknown
Part Number : Unknown
MCC+MNC : Not found
IMEI (private) : Unknown
Serial Number (private): Unknown
MAC Address (private) : Unknown
Any help with any of the above questions would be great, or maybe someone who has experienced the same problems.
Hi
There are 2 possibilities:
1 this is a chinese clone, do a search for these 2 words to understand. The clues are you can't hard reset with the normal combination and device info can't recognise it.
2 you bricked your device by not Cid unlocking before flashing the WRONG rom, Touch 3g is another device. If you can still use it normally then it's the first possibility.
BTW you also skipped the most important step before flashing: read carefully the wiki
Good luck
Many thanks Tito12, I have been looking into this a bit more but only managed to comfuss myself more. lol
I dont think its been 'bricked', if I switch the phone on normaly it loads in Windows and works fine - but in Japanese.
I have looked more into the idea of it being a 'cloned Jap WM' but nowhere seems to show any answers on being able to change the installed Rom to another one.
I have also found out that there is a difference between Elf and Elfin, I have been using the Elfin software, so I searched for Elf software and got redirected to the Elfin software.
I tried the CID Unlocking again, the info on the computer screen says its going to restart the phone into BootLoader but the phone resets and loads Windows - Aggghhhh
I also tried to Flash the Rom with a new WM I downloaded but the USB drops just before the Rom starts to install.
Also, you said 'BTW you also skipped the most important step before flashing: read carefully the wiki'. I hate to be a Noob but I have searched the XDA Forums for the answers and even tried the Wiki but still no luck. Is it something Im doing wrong.
Thanks all
Hi
This is the link http://forum.xda-developers.com/wiki/index.php?title=File:HTC_Elf.png
There's no japanese clone, chinese clone is a device that looks like the Elf/in but cannot be flashed with winmo tools. There are a couple threads dealing with it but AFAIK you have to find other ways to change the rom (if they exist).
Do you see IPL and SPL when you are in bootloader?
Related
Hi to all in this forum.
I have one T-Mobile MDA Compact II PM200. In this forum i hound that his name is Charmer. I try to unlock it with Lokiwiz03a. Program give me a code but device says that code is wrong. I try with other software to unlock it and after that mobile work with SIM card but no signal
I reflash mobiele with WM6 founded her in the forum, not it have English (before have German) but again no signal. I try now to unlock it with Lokiwiz02a and choose CID unlock. Again no signal.
When device in Automatic search mode no found network. If in Manual mode found but unable to register in network. When i put mobile to my computer speakers no outgoing signal from mobile that's not normal.
What is the problem ?
Can onyone help me with information ot needed software ?
In moment mobile information is:
ROM version: 10.2.0.8 WWE
ROM date: 2/03/07
Radio version: 01.12.20
Protocol version: 4.0.13.23
Identity:
Model No.: WIZA200
Platform: PocketPC
IMEI: 35703700051525500
Hardware:
CPU: OMAP850
Speed: 195 MHz
...
I try to found information about this problem here in forum but w/o result.
10x in advance
Did you try to flash a new radio? 2.69 or 2.19?
No.
I found this files:
BREEIMG.zip
breeze.zip
inside breeze.zip are:
SSPL.exe
spl
breezessplv1.nb
inside BREEIMG.zip is:
BREEIMG.nbh
is this needed files for radio flashing ?
if not then what files I need to try with other radio version ?
I download Radio from ftp on this form for Prophet. And try with Prophet_G4_RadioRom_v2.47.11 but now mobile not start. Go to splash screen and after few seconds restart.
I try to put it in bootloader mode but ActiveSync can't make connection and for that flash software can't wreit new radio or flash into mobile.
I ry with:
1. dowenload this t-mobile official rom (http://www.tm-phonedownloads.com/files/RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship.exe)
2. enter your Charmer into bootloader mode by pressing power + camera + reset, let go of the reset, but keep holding power + camera until the three colur screen will show up (that is bootloader mode).
3. connect the Charmer to your pc (make sure your battery is fully charged)
4. run the t-mobile rom.
5. good luck!
but ActiveSync can't make conection.
?
If you are in bootloader Active Sync wont make a connection. Just plug in the usb cable into your phone while in bootloader and run RUU.
Cheers,
vlodeck.
I try with this 2:
1. T-Mobile official rom RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship
2. Prophet_G4_RadioRom_v2.69.21
T-Mobile official rom RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship
===================================
inside are this files:
EnterBootloader.exe
nk.nbf
README.doc
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
Prophet_G4_RadioRom_v2.69.21
========================
inside are this files:
EnterBootLoader.exe
nk.nbf
ROMUpdateUtility_G4.exe
RUUGetInfo.exe
RUUResource.dll
phone not start normaly. just start and after 5sec restart. i put it in Bootloader mode (press Camera, Power_buton and Reset. then release Reset and after few sec. mobile goto in Bootloader mode). when conect USB cable ActiveSync not find mobile and this file not make upadte/conection: ROMUpdateUtility.exe and ROMUpdateUtility_G4.exe
if I try to start RUUGetInfo.exe windows says that this is not valid Win32 application.
then what RUU to start ?
how to flash other Radio into this mobile or to reflash it again to be alive ?
anyone will help me for my problem ?
in moment when i start my pocetpc it displays:
IPL 1.12
SPL 1.12.0000
OS 10.2.0.8
the row GSM .... missing.
in moment i can't make connection with ActiveSync. then how to flash again mobile ?
now i try to flash it with RUU:
http://www.tm-phonedownloads.com/download_manager_mda_com2.html
http://www.t-mobile.de/downloads/?r...ku3.3_38222_382117_026921_tmo_de_ger_ship.zip
but it gives a error
i try with this:
http://www.my-audio.net/xda/Univers...s/Universal_Upgrade_v1.30.68_radio_1.09.0.zip
but when software start flashing says that this Utility is not for my device and to find right
?????
I'm guessing that this universal radio upgrade is for universal
Download this:
http://www.mobione.pl/pliki/ruu_252_eng.zip
Extract it, copy the .nbf of the rom you want to upgrade your device with to the extracted RUU folder. Once copied - run RUU.
P.S. The problem with your device is that you have upgraded wm6 on 1.xx bootloader. Thats why the system doesnt start. If the method I described above doesnt work. Post me.
Cheers,
vlodeck.
now i can bootloader mode,
i did it but got this error while i upgrade my rom to newest rom 3.3...
i got this "invalid command 326": please check your NBF data, this NBF data cannot be used for your PDA Phone.
hi again to all
after long time i try to play agian with this brick-PM200 that haven't signal.
last time (before more 2 years) i write ROM and after that PM200 not start, only in Bootloader mode (3 color lines).
today i revive it when flash this:
HTC_charmer_upgradeut_noid.rar
(
EnterBootloader.exe
nk.nbf
ROMUpdateUtility.exe
RUUGetInfo.exe
RUUResource.dll
)
PM200 start, in begin fave full signal. after 30-40 seconds signal gone (but not test in/out call). i try to restart mobile, try hardreset, try manual search on operator - all no result.
on start i put near radio but power amplifier not work. i think that this is harware problem.
but not 100% sure.
is possible this problem to be from wrong radio settings ?
i try to write different radios for Prophet but every time get message "Invalid tool" and radio flashers stop.
i try with universal radio thata Vlodeck says but again this message.
what to do ?
before two days i repair one HTC Touch Elf100 and read that can sniff USB comunication to check Vendor ID and other ID.
but in my PM200 this not work. on Elf100 work easy like is writed here in forum.
when start wyty (or what's name is) make connections with mobile but after write:
ruurun 0
says that need password. if try with password for Elf100 not accept it.
what is the password for Charmer (PM200) ?
or if there is other way to get Vendor ID and other ID how ?
I can help you maybe. You need to downgrade to Aku 2.2 using the original utulity. Then the Radio will be downgraded too. But nobody knows the exact way on how to do that. (Maybe Vlodeck knows that?) I'll try to get it this week and tell you then.
As for the password try CHARMER. I have never been able to test it with MTTY cause I don't get in the right mode but I think the olny possibility is CHARMER. Just try it with whatever tool you want.
Hope that was helpfull
10x for answer.
next day will test password and post result.
how to downgread to aku2.2 ?
if you find solution please post it.
today i try but w/o success:
Cmd>password charmer
Cmd>ruurun 0
Cmd>getdevinfo
Invalid command : getdevinfo
For a help screen, use command ? or h
Cmd>
i try and with passwrod CHARMER. result is same.
what are commands for MTTY that supported Charmer ?
OK you have the same problem I have. You have Cmd> in the window. To get the comands and the password working you need USB> instead of Cmd>. That is the same problem I have and I don't know how to fix it.
in moment i use MTTY 1.42
before 3-4 days i repayr one HTC Touch Elf100. and this MTTY work find. no problem that write CMD not USB.
terminal show CMD> i write commands and mobile answer w/o problem.
but in my Charmer not answer.
possible reason is access password. but not sure.
There are simple comands. And for them you don't need SuperCID. I tried them and they haven't worked too. So I think there is something else with it. Maybe the Bootloader locks all comands and you need a password for that too. But I don't know about that.
@ChrBeck
you try to make SuperCID SD card to have full access to mobile. and after that to try flash it with RUU ?
next morning will try this.
p.s. now find this:
http://www.tm-phonedownloads.com/
http://t-mobile.iris-global.com
Well, we can't SuperCID and Security unlock a Charmer with a bootloader over 1.x at the moment. This is surely impossible. That won't work using a SD Card too. So I think you will not have any luck.
NO GSM FIX FOR SOME PHONES:
CLICK ON LINK
http://forum.xda-developers.com/showthread.php?p=2276981#post2276981
POST #56
I am making this thread so someone can please help us users of a HP hw6900 Series with the "NO GSM" startup message.
I have a HP hw6925, NO GSM, my product was under warranty and I recently sent it in to HP, , it would cost almost $300.00 for a new board, and I had the warranty at that time.
My next attempt to try and fix this issue will be what is posted at the link below.
If anyone out there has any "Sable" Backups, post in this thread, email me at [email protected]
I will post them on rapidshare, and alternate sites for everyone to download.
This is a huge problem. These HP hw6900 are nice phones, most of us still want to be able to use them as a phone, and a "PDA", some of us right now inlcuding myself can only use them as a PDA, or not at all, I will posting links later today, that should get any SABLE from the "Stuck on Bootloader Screen".
I am willing to donate to anyone who is serious about helping us fix this issue if it is possible, without replacing the mainboard of the hw6900, I will also be calling HP, and post the part number here and actual price for the hw6925 board.
"stuck On Bootloader"
If you are stuck on a HP Invent Screen, with G.39, etc.
And you have tried to hard reset and softreset with no luck, this is what you do.
XP Instructions:
1. Download this link http://www.mediafire.com/?3ygfbx0sjdy
2. In the taskbar area in the right hand corner, right click on activesync, bare with me, I'm using Vista and have to remember this, click connections..., you need to uncheck everything click ok or apply...
3. press ctrl-alt-delete, end process wscescomm.exe, (named something like that, end the process.
4. Extract the file you downloaded if needed.
5. Connect your device to the usb port on your computer.
6. Run Uni Exit Bootloader Application. Done
Vista Instructions:
1. Download these 2 links, and extract them if necessary.
http://www.mediafire.com/?3ygfbx0sjdy
http://www.mediafire.com/?9pmjkponfsg
2. Start Device Manager, (Start-Control Panel, Class View[Far Left Corner])
3. Connect HW6900 to USB port, you should now see a Mobile Devices (Next to + sign), Double Click
4. Right-Click on the Device, Click Update Driver Software, Choose let me pick from a list, Uncheck compatible hardware box.
5. Click have disk, Browse to location where USBAS is extracted, choose the wceusbsh.inf file, Double Click.
6. You should see Microsoft USB Sync, if not and it reverts back to the already installed file, and the box rechecks itself, uncheck it, choose microsoft, and choose the latest Microsoft USB Sync to install
GOOD LUCK
My Current hw6925 Status
"NO GSM" When Booting Up
I beleive it has No RadioOS.Nbf & No RadioFS.Nbf & No Imei.
Here is a screenshot of the Asset Viewer on the GSM Tab
Windows Mobile 6, Windows Mobile 6.1 Port
Official Windows Mobile 6/6.1 Port for hw6900 Series
Let's Get started people, Contribute to this thread.
If you have any Full Backup's of any hw6900 series thread post on rapidshare.com or mediafire.com
If you can not let me know by email, I will figure out a way to post them for you.
Again, any programmers willing to help any of us hw6900 Users, Please Help
Let me know the paypal account to deposit to via pm, I will post that information via this thread.
I need official 1.30 Cingular Roms from "Working" Devices.
If you can backup everything, including, RadioOS, RadioFS, CEOS, CEBL,
for those of you with fully working devices, please contribute to this thread.
Everyone please, I am trying not to wake up and see myself as the only one posting in this thread, I'm not the only one that wants this or the only one with problems with their hw6900 Series phone.
Please Contribute
HP HW6925 Repair Costs
Repair Cost $286.48 + Sales Tax.
Payment by Credit Card
Will take 3-5 Days,
I beleive they ship the box to you. (I think)
To much for my blood, May as well get a I-Phone
Hi,
I don't have any problem with my 6915 i have a french rom if you want and if you say me what i do to extract my rom i can upload everything to you
++
Radio Backup
dexxa05 said:
Hi,
I don't have any problem with my 6915 i have a french rom if you want and if you say me what i do to extract my rom i can upload everything to you
++
Click to expand...
Click to collapse
Do you have at least a 1 - 2 gb minisd card?
If so download mtty here
http://buzzdev.net/downloads.php?file=75
If you have Windows Xp, (CTRL-ALT-DEL) end process for wcescomm.exe (something like that).
put 6915 in bootloader mode, connect to usb port, press ctrl-alt-del, make sure activesync process is not running (WCESCOMM.EXE .......)
Start the mtty1.42.exe program
you should see:
USB>
now type
d2s 60000000 800000
If you have any problems please email me or im, [email protected]
Alot of people need this file, if possible, I am willing to even remote desktop connection, if you are unable to extract the radio rom.
Let me know what happens
i'd like to contribute what I can to this project I have an hw6955, when I went into bootloader to try to make a backup of my rom I get an error and it does not complete the process
jambongo said:
i'd like to contribute what I can to this project I have an hw6955, when I went into bootloader to try to make a backup of my rom I get an error and it does not complete the process
Click to expand...
Click to collapse
Do you get a "Cal Cheksum" on your Screen
try backing up your device using awizard tools, posted on here in the somewhere,
full backup including radio, ext rom, etc ........
then post it here
I will begin the Real WM6 Port
here's the message I get:
Code:
SD:Waiting for card insert.........
CMD3 for SD, it's OK, ready to get RCA from response.
SD:Detected one card
SD:ready for transfer OK
d.total_lba=1E4A00
d.block_size=200
d.RCA=E624
d.drv_type=40000000
d.busWidth=1
Total card size=3C940000
Read singal error D3
Read singal error!
SDCARDD2S+,cStoragePlatformType=FF
Some more info that may be useful:
Memory
System ROM Size : 128MB
System RAM Size : 64MB
ROM Is Flash : Yes
Flash Chip Type : G4
Flash Block Size : 256KB
PSM Driver Version : N/A
Version
Product Revision Level :
ROM Date : 08/28/06
ROM Revision : 1.52.00 ENC
Extended ROM Version : N/A
OS Version : Windows CE 5.1
Bootloader Version : G.39
XIP Version : 1.0.0.0
Camera
Module Present : Yes
Hardware Revision : 9650
Hardware Driver Version : 0.8.0
Software Driver Version : 4.1.0
Software Version : 1.0.21
Camera API Interface Version : 1.0.7
Camera Information : 1.3 MP 8X Zoom
Bluetooth
Radio Present : Yes
Firmware Version :
Hardware Revision :
Driver Version : 1.7.1.7800
Software Version : 1.7.1.7800
Wi-Fi
Radio Present : Yes
Firmware Version :
Hardware Revision :
Driver Version : 1.00.00
Software Version : 2.0.53
IP Address : Radio is Off
GSM
Radio Present : Yes
Radio Firmware Version : 1.02.00
Radio Protocol Stack Version : R5G.27.00.05
Radio Bootloader Version : 0.06
Radio File System Version : 0.07
Default Radio GDFS Version : 0.05
GPS
GPS Present : Yes
Status : GPS is Disabled
Manufacturer : Global Locate
Revision Level : N/A
Driver Version : 2.00
Firmware Version : 4.169.154.0
Software Version : 2.9.0.0
Awizard Tools
http://forum.xda-developers.com/attachment.php?attachmentid=26038&d=1138056282
Download the link above, then, run the program in windows 2000 compatibility mode, choose that by right clicking the file, click on properties, then, compatibility tab, check mark run in
compatibility mode, choose windows 2000, click apply ok, then run the program, choose the option for backup your device, backup everything choose [Y] or [YES] to everything, including radio, os, ext rom, .....
Follow the directions, beleive the device has to be connected to activesync, let me know what happens, any questions email, me,
Anyone else can do the same, lets fix these Sable devices, and start on a WM6 Port,
jambongo said:
here's the message I get:
Code:
SD:Waiting for card insert.........
CMD3 for SD, it's OK, ready to get RCA from response.
SD:Detected one card
SD:ready for transfer OK
d.total_lba=1E4A00
d.block_size=200
d.RCA=E624
d.drv_type=40000000
d.busWidth=1
Total card size=3C940000
Read singal error D3
Read singal error!
SDCARDD2S+,cStoragePlatformType=FF
Some more info that may be useful:
Memory
System ROM Size : 128MB
System RAM Size : 64MB
ROM Is Flash : Yes
Flash Chip Type : G4
Flash Block Size : 256KB
PSM Driver Version : N/A
Version
Product Revision Level :
ROM Date : 08/28/06
ROM Revision : 1.52.00 ENC
Extended ROM Version : N/A
OS Version : Windows CE 5.1
Bootloader Version : G.39
XIP Version : 1.0.0.0
Camera
Module Present : Yes
Hardware Revision : 9650
Hardware Driver Version : 0.8.0
Software Driver Version : 4.1.0
Software Version : 1.0.21
Camera API Interface Version : 1.0.7
Camera Information : 1.3 MP 8X Zoom
Bluetooth
Radio Present : Yes
Firmware Version :
Hardware Revision :
Driver Version : 1.7.1.7800
Software Version : 1.7.1.7800
MAC Address : 00-17-E5-A4-B3-97
Wi-Fi
Radio Present : Yes
Firmware Version :
Hardware Revision :
Driver Version : 1.00.00
Software Version : 2.0.53
IP Address : Radio is Off
MAC Address :
GSM
Radio Present : Yes
Radio Firmware Version : 1.02.00
Radio Protocol Stack Version : R5G.27.00.05
Radio Bootloader Version : 0.06
Radio File System Version : 0.07
Default Radio GDFS Version : 0.05
IMEI Number :
GPS
GPS Present : Yes
Status : GPS is Disabled
Manufacturer : Global Locate
Revision Level : N/A
Driver Version : 2.00
Firmware Version : 4.169.154.0
Software Version : 2.9.0.0
Click to expand...
Click to collapse
gave the tool a shot, but it gives me this error when it tries to backup the radio:
Code:
ERROR: ITTFFSGetInfo: outbuf==NULL
WARNING: using default 512 bytes for sectorsize
CopyTFFSToFile(0x50000, 0x280000, ROM\sable\sable-Radio.nba)
ERROR: ITReadDisk: outbuf==NULL
besides that no problems generating an OS and a boot.rgu image file
Okay, I'm also using a hw6915 with original german ROM, and I'm interested to get an to help getting WM6 on it.
Where is the problem? So many HTC devices have been got to run WM6. I thought the 69xx has also been built from HTC. Is there such a big difference, or is the "Sable" just a rarely used device so that no one knowing how to do is just doing it?
I am using the hw6915 with english uk original rom.I would like also to see the wm6 on my device..But the problem is that the developers will not fix a version for this device,because they are not interesting for this.We would be lucky if somebody of them had a device like ours and he had the grazy to make a version for this,for his own use,but they have Htc all of them and our mobile is old for their fancy now...Too bad..
any progress on this?
jambongo said:
any progress on this?
Click to expand...
Click to collapse
no progress at all, no one to help, or even a email reply back
my knowledge is limited in this area, but I am more than willing to help, I did provide a partial backup to you about a month or so ago
I'd still love to see a Windows Mobile 6 or 6.1 upgrade. I'm not sure how I could help. Does anyone else know why no one has cooked one up? I'm guessing no one who can owns one of these things.
I have a 6955 and will be doing a backup soon. I will post it as soon as I have it. Lets get things rolling.
This link should help with raw ROM dumps through the bootloader.
http://forum.xda-developers.com/showthread.php?t=325683
Hello eneryone. I am a brand new user of an htc touch elf 0100 with rom 1.11.706.1.b en , ce os 5.2.20758 .i have a lot of quaetstions about it.
1. I cant do hard reset on the device. Why? I tried both green and red buttons with reset button with stylous but nothing...
2. Whitch rom update is suitable for my device? If anyone can post the link i will be very happy
3. I live in greece and i bogth fron uk, is there any update of rom in grrek
4. I bought an 4 gb micro sd ram but the device doesnt recognize it. What can i do? Please if anyone knows abut it help me!!!
Thnx alot
Hi spirosleon
To hard reset:
Hold down send/reject buttons (green/red at the front) and reset with the stylus; release the stylus but keep holding the buttons till you get 'this will erase all your personal data' message, then press 'action' (big front button) to hard reset.
I took this from http://wiki.xda-developers.com/index.php?pagename=HTC_Elf
You should read all of it and slowly try to understand the basics.
For Greek you need to change MUI read http://forum.xda-developers.com/showthread.php?t=374677&highlight=greek+rom , the Greek cab is in post 92
I did it but nothing!!!!!
It just soft reset. I hold them for more than minute but nothing. Is it possible to be an mulfaction of the rom? Its the original one
HI
First Your touch should recognize 4GB Sd card check it is formated as Fat32 or not
Second ressing red and green buttons together with stylus soft reset the screen becomes blacck with several lines of words on it at this point press midlle action button for hard reset
If the device doesnot hard reset and cannot see all size of SD this may be a phake (clone) device
If it is a clone you cannot upgrade rom
tito12 said:
Hi spirosleon
Hold down send/reject buttons (green/red at the front) and reset with the stylus; release the stylus but keep holding the buttons till you get 'this will erase all your personal data' message, then press 'action' (big front button) to hard reset.
Click to expand...
Click to collapse
Did you do exactly this, pressing the stylus for one second, not more ?
i still cant do hard reset. and how can i recognize if it is a clone? it has the same processor as the elf, the same size memory but not exactly the same menu with the original(if its a clone)the infos of my device are:
ROM VERSION 1.11.706.1.B En
ROM DATE 5/24/07
MODEM VERSION 03.07.90
PROTOCOL VERSION 4.1.13.51
MODULE ID ELF 0100
PLATFORM POCKET PC
CE OS 5.2.20758 (BUILD 20758.1.4.1)
I TRYIED TO UPDATE THE ROM BUT WHEN IT BEGINS THE ACTIVESYNC STOPS!!!!!!WHY???
Hi
First use this app to get the info we need
http://forum.xda-developers.com/showthread.php?t=418892
Then we continue
i did it but nothing!!! look what it says
HTC Touch device information - by dsixda
Touch version : Unknown
Device ID :
CID :
IPL :
SPL :
ROM Version : Unknown
ExtROM Version : None
Operator Version: None
AKU Version : 1.4.1
Page Pool : Unknown
RAM Size : MB
ROM Size : MB
Model No. : Unknown
Part Number :
MCC+MNC : Not found
IMEI (private) :
Serial Number (private):
MAC Address (private) :
oh my god....
htc s1 i have......
oh my god....
htc s1 i have......
I am sorry, it looks like a chinese clone
See if this works for hard reset: press and hold volume up button + camera and then use the stylus to do reset
This looks like a clone as the rom version is also strange to HTC roms try to return to the seller if you bought it as original also compare its price to original
if you by on net give them negative feedback
Hi, to everybody:
I have got a HTC P3300 device (Artemis) purchased in Spain in 2006, unlocked, so I've got no problems on that.
It's was updated by me to WM6 Professional (OS CE 5.2.1620, Build 18125.0.4.2) using official ROM for free devices.
ROM Ver.
ROM Ver: 3.13.412.1 ESN
Date: 8/28/2007
Radio ver: 02.94.90
Protocol ver: 4.1.13.44
ExtROM ver: 3.13.412.102
Now I would like to upgrade it to a cooked ROM like Shady's new ones with WM6.5 or another one with TouchFlo but I can't, altough I've tried almost everything. I'm not a newbie and I work like developer so I understand the most I read but now I'm completely lost; let me explain to you.
My laptop has Windows 7 Ultimate (32bit) installed and I know that this OS(and Vista) have problems so I also tried on XP Professional SP2 without success.
I tried to upgrade the device using the exe directly and trough USPL (from this site and others) but nothing works. I always get the same 2 errors; normally when I use USPL I have error 260 (connection) because the device doesn't go to bootloader screen and if I restart the device into bootloader manually, if the update process starts (not always), it reaches less than 5 or 10% returning a 270 error with message "File corrupt".
I read a lots of in this forum and similar ones checking steps one by one, even trying to update/install USB drivers for Vista but nothing works. When I use USPL, screen goes to black and "unkonwn device" plugged in to USB port is detected on the system so I think the problem is the program can't put the device in correct state, but if I activate bootloader by my self "Sync Device" appears in devices manager but I cannot go futher as I said before.
Do I must make a downgraded to original WM5 and start from it (maybe a problem with loader version)or there's anything that I forgot?. If someone knows a link or think that I missed some step, please help me.
Any kind of help would be appreciated so much. Thank you in advanced
Solved!
OK, here I am!.
Finnally I solved the problem. The issue was that I had have to "do a hard reset before" try to update the ROM. I read somewhere that an application locked the device avoiding the ROM upgrade. I just went to settings > system > emtpty memory and since then I was able to upgrade like the posts said .
Best regards
LoKatEs said:
OK, here I am!.
Finnally I solved the problem.
Click to expand...
Click to collapse
6 minutes between your first and second post and u say: finally i solved the prob!
hahaha
good to hear its working again
Can you post a link for the WM 6.5 version, i found two files, but couldn't install
in the rom section u can find a few wm 6.5 versions.
unlock your phone with USPL and then follow the installation instructions of the roms posted
shady313 and babbelut roms are the most current ones based on 6.5
neither of them have touchflo support though but babbelut rom has spb shell, a different kind of touch cube system
mvenneker said:
babbelut rom has spb shell, a different kind of touch cube system
Click to expand...
Click to collapse
which is really awesome!
its a shame i prefer the 6.1 simple style otherwise i would of kept his rom
Hi all!
I was searching the entire forum about how to change my IMEI number of my HTC Universal. But unfortunately I couldn't find any specific topic which instructs the process totally, from the beginning till the end.
I made a detailed research in the forum many hours and downgraded my rom file to a lower version from 2.00.45 to 1.90.94 (although it was the original t mobile rom loaded) because I learned that it may not unlock the CID if the version is higher than 2.00
I succesfully flashed the rom for i-mate jasjar and downgraded. Then, I used HTC universal sim unlock.. I did everything what is written and radio version become 0.00.00... I copied the exe file "uni unlock v1.exe" to the device memory and it was also successfully completed..
However, I couldn't identify my IMEI number correctly when I used aWizard and Lokiwiz.. (they both gave me some errors) and I couldn't identify my IMEI number correctly ( it gave me sth like C34AE5 etc...)
the information of my HTC is recently as follows:
CE OS 5.1.342 (Build 15605.3.2.0)
Memory: 49.73 MB
R 1. 11. 00
G 42. 53. P8
D 1. 90. 94 WWE
my device has G3 chipsets
I looked everywhere but nothing happens. Please help me asap!
N0KTuRN4L said:
Hi all!
I was searching the entire forum about how to change my IMEI number of my HTC Universal. But unfortunately I couldn't find any specific topic which instructs the process totally, from the beginning till the end.
I made a detailed research in the forum many hours and downgraded my rom file to a lower version from 2.00.45 to 1.90.94 (although it was the original t mobile rom loaded) because I learned that it may not unlock the CID if the version is higher than 2.00
I succesfully flashed the rom for i-mate jasjar and downgraded. Then, I used HTC universal sim unlock.. I did everything what is written and radio version become 0.00.00... I copied the exe file "uni unlock v1.exe" to the device memory and it was also successfully completed..
However, I couldn't identify my IMEI number correctly when I used aWizard and Lokiwiz.. (they both gave me some errors) and I couldn't identify my IMEI number correctly ( it gave me sth like C34AE5 etc...)
the information of my HTC is recently as follows:
CE OS 5.1.342 (Build 15605.3.2.0)
Memory: 49.73 MB
R 1. 11. 00
G 42. 53. P8
D 1. 90. 94 WWE
my device has G3 chipsets
I looked everywhere but nothing happens. Please help me asap!
Click to expand...
Click to collapse
try with use HTC IMEI Restore Wizard >> http://forum.xda-developers.com/showpost.php?p=995304&postcount=1