Database Users

Urgent Artemis Powermap Problem

This is what is in the meniu. And I am waiting for more than an hour.
WHAT SHOULD I DO?
Start Time: 8:37:38,28
*
* Dopod P800W Rom Upgrade to WM5 AKU3.0.1 PDAMobiz Edition v1.1.2 (PowerMap Vers
ion)
*
* Total process may take about 15-30 minutes depends on CPU speed.
*
Initializing..............*
UPGrade OS to WM5 AKU3.0.1 RuChonburi PDAMobiz Edition... DO NOT DISCONNECT UNTI
L PC Process Finish...
*
* Start Time:
8:38:35,14
*
* Upgrade OS: This process takes about 12-20 minutes depends on CPU speed
* Please wait...
*
* After 30 minutes if it hang, just press at reset
*
Copying D:\UPROM\itsutils.dll to WCE:\windows\itsutils.dll
3 partitions, 2 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 f5 2b 02 03 30 02 07 a9 02 08 06 6f
CopyFileToTFFS(powermap.nba:0, 0, 03900000)

Calm down. Seems the process did not work. Now you will need your original rom and flash it back from bootloader mode.

how am i going to flash my original ROM?

how?
Adigital said:
Calm down. Seems the process did not work. Now you will need your original rom and flash it back from bootloader mode.
Click to expand...
Click to collapse
How can i do this?

1. You connect you device to pc
2. Then you enter into bootloader in you device like this
"""""""
The bootloader is invoked by pressing down the Power and Voicedialer buttons simultaneously, and using the stylus at the same time to press the RESET button at the left side. Continue pressing the two buttons for a few seconds after pressing and releasing the reset button until the bootloader screen appears.
""""""
3. And then you run the .exe file , i mean the rom file... I think you can try any dopod's rom...
4. You are done
Here is a dopod's rom...

OK, i'm in bootloader mode.
But from where do i run this exe file, because active sync doesn't see my pocket pc?

macoveibp said:
OK, i'm in bootloader mode.
But from where do i run this exe file, because active sync doesn't see my pocket pc?
Click to expand...
Click to collapse
Just connect device and click on the RUU file

I used ART_HTCWWE_11240501_026790_WWE_Ship
An it is error[244] invalid model id

I think i will suffer a PANIC ATTACK

now i'm wondering. Is p3300 the same thing with Artemis?
I don't have the guide of the pocket pc or anything else.
All that i have is the pocket pc, made by HTC and the cables.

Please, somebody HELP.
Anybody?

Same old ****
Im not so sure if this is comforting news, but I did the exact same just now, and I have the exact same results. I am stuck on the same place as well.
Should we CID unlock the phone for it to work with other ROMs? or what. the activesync does not recognize the phone, and neither does any other roms.
Anyone?

I cannot say that for 100% but as long as you have the original ROM that came with your device it should be possible to recover. I used the T-Mobile UK shipped rom cos I have MDA Compact III and it went ok. The ID in the ROM mached the one in the device. I might be wrong but that's what I know.

As you could read in the other thread, you're stuck now.
- CID unlocking your phone can't be done without a working phone.
- You can get back a working phone if you have your original rom only.
Please read the other thread and you will find the answers.

fragger believe me I read so many threads already, but it is still confusing! I understand that for example only the original will work. Fine, where do I find my original?? There is a tmobile NL version on the ftp of this site, but when I unzipped it, it had no executable file, and all I had was about 20 files with wierd extensions. How do I use them?
I tried many of the other versions too, but because the activesync does not recognize the phone, none will work so far. I tried a lot of them already, including the original tmobileUK one, and I get the invalid ID crap. Have no idea what to do now! Maybe you would know of anything else I can try.

tghobar said:
fragger believe me I read so many threads already, but it is still confusing! I understand that for example only the original will work. Fine, where do I find my original?? There is a tmobile NL version on the ftp of this site, but when I unzipped it, it had no executable file, and all I had was about 20 files with wierd extensions. How do I use them?
I tried many of the other versions too, but because the activesync does not recognize the phone, none will work so far. I tried a lot of them already, including the original tmobileUK one, and I get the invalid ID crap. Have no idea what to do now! Maybe you would know of anything else I can try.
Click to expand...
Click to collapse
There is no TMobile rom on this ftp server, only an ExtROM.
As far as I know, there is no TMobile NL rom available. So you can't fix your phone, you have to send it to the repair center.

NEED ROM for my T-mobile III
I have flashed rom and ended like some fellows here.. all I can do is get to bootloader.. so I need original ROM for my MDA. Does any7one have the device like mine and can get ROM from his device and put it here.. PLEASE.. My device is ARTE110 T-Mobile MDA compact III from Austria

hello I have the same question!
how can I unlock my Phone Model-Nr.:ARTE110 T-Mobile compact III
thanks a lot

Where to start?

I have an HTC Innovation, Qtek 9100...also wizard i think, Os: 1.1.7.8
GSM 1.4.10, SPL 1.01, Ipl 1.01, The language is in french.
I want at least to change the language to english, but i want it also a little updated.
I don't know what g3, g4 means and how to find out what version i have.
Please tell me where to begin to upgrade the phone, here are to many post and are some terms i don't understand like g3, g4, ipl, spl.
I don't think the phone is locked.
I also have vista
Thankyou and please guide me a little.

Start Here
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
You have a G3 device
Here is a link to flash an english rom to your device
ftp://xda:[email protected]_9100_RUU_Prodigy_10107105_Qtek_WWE_ship.exe
it is not an upgrade basically the same as you have now but in english
here is a link to all the files you need to unlock the wizard both sim unlock(any sim card can be used) and cid unlock( You can install any rom)
http://rapidshare.com/files/53377946/Wizard__CID___Sim_Unlocker.rar
password for rar file is scousemartin
Once you have all this installed, you can flash any wm5/6 rom available for the wizard

thankyou, u've cleared things up for me ...
just how u know that is ia g3 or g4, g i think g stands for generation right??.....
found the info from the links...thanks again..
lanst question, after u what is the best wm5/6 to install onto the wizard? what rom posted here? i see here some tnt rom, are they good?

I use tnt 1933 from here and have no problems with it ,i would use radio 2.19 as well,as people have issues with missed calls etc, a link for that is there too
I know you have a g3 as your ipl and spl are 1.01 if it was a g4 it would be 1.01.xx
http://forum.xda-developers.com/showthread.php?t=341550
download links are located in post 3

you know what is not working? the link to the original wwe rom, from the ftp, looks like it is not there anymore!? can u verify that? or is my computer the problem?

yes i have just checked it isnt available anymore, in fact none of them are there anymore. download my wizard unlock pack and unlock the wizard with lokiwiz2b how to is here http://forum.xda-developers.com/showthread.php?t=249474

hope this is my last question!
What i have missed or what am i doing wrong?
so, i installed the rom from your unlock archive and it is ok, my wizard is in english now
i tried my simcard and it works so that results that my phone is not sim locked so i didn't use any of the sim unlock tools.
now i try to flash the tnt rom and gives me : error 295 and says something like imposible to use on your device and says to use some newer nfb file
...and what is the extended rom?
now i am reading: You MUST have an IPL and SPL at 2.xx or higher (BOTH not just one or the other).
so this means i can't install this rom if i have ipl spl 1.01?
reading a tutorial while updating this post!, so i red that i have to install a tmobile rom before i can install any rom? is this true?

Which rom did you install the button rom? or the o2 rom?
if it was the button rom did you follow these instructions
1 - Unzip lokiwiz.zip to a folder on your desktop
2 - Copy EnableRapi.cab to your Wizard
3 - Execute the EnableRapi.cab in your phone. Wait for it to finish
4 - Guarantee that your phone is connected via activesync with the computer
press the windows key + r and type cmd and press enter to get a dos window,that way when lokiwiz finishes you will still be able to read what it says
5 - Click on the black dos window that has opened and type cd desktop then type dir /ad and then a list of all the directorys on your desktop will be shown then change directory to the lokiwiz2b directory and Execute lokiwiz.bat (on your computer!)
Extended rom is what it says, a part of rom that is in an extended partition, basically it contains customisation programs and important files for installing into the wizard when it is hard reset.
when you say you tried your simcard ,was it the same provider e.g. o2 that you were using before? If it is the same that wont make a difference, try a sim from a provider that you dont have like t-mobile.
Anyway simunlock just allows you to use any sim, cid unlock allows you to load any ROM which is what you want to do.

Iolite: can I change with Qmat from RUS to GER?

Hi
to my 60. birthday I received an HTC Touch Cruise 09 (T4242) as present from my friends in Moscow together with the file
RUU_Iolite_HTC_GER_1.11.407.1_Radio_Sign_12.41.30 .16_0.41.30.12_Ship.exe,
I think it's a non-branded version.
At first I wanted to check with Qmat_442 if I can read the CID of my SD-cards (1GB Sundisk - delivered with the phone - and 512 MB Kingston, formatted as recommended) but was not successful. Before I unlocked the Registry with CeRegEditor and changed the value of 00001001 from 2 to 1. ActiveSync 4.5.0 (Build 5096) is connected and synchronized. I use XPSP3.
After an Hardreset I receive:
R 0.41.30.12
G 12.41.30.16H
D 1.09.40104
Is it possible that I can't read the CID because Qmat is not registered yet? How can I save the original ROM content?
Please help me!
With the help of registered QMAT and the created Goldcard it was a snap to load the unbranded German version ...
Due to a contact problem I couldn't read mySD-card. Now all works fine!

HTC P3300 ARTE 100 PocketPC (how update?)

I have an htc P3300 art 100 I never updated PocketPC! currently has:
Microsoft "Windows Mobile" 5.0
ROM version: 1.12.408.1 ITA
Date ROM: 09/12/06
Radio version: 02.67.90
Version: Protocol: 4.1.13.28
Version ExtROM: 1.12.408.8006
Hardware: CPU: OMAP850 - speed: 201 MHz - size RAM: 64 MB size Flash: 128 MB - bus data: 16 bit - size store: 37,63 M - resolution display: 240 X 320 - colors: 65536
Tom Tom NAVIGATOR 6
1 micro SD 2 GB I loaded map tomtom Europe v6.75 and various PDI for a total di1850 MB.
Given that the site of the htc has lifted the updates of Windows Mobile that htc.
Who can help me with clear steps to update my htc P3300?
Having said that I have a notebook with view 32-bit with a usb with pochet PC connection "Centre management devices floating Windows"
Please help!
Thank you.

i suggest u take a look on forums on how to installate a custom rom, but since its friday and i am always ready to go home from work i thought, lets be helpfull lol
step one: by the looks on what u write u dont have activesync installed on the laptop: go download Activesync from Microsoft website
step two: read the following topic http://forum.xda-developers.com/showthread.php?t=311403 and in that way u can unlock your phone for custom rom flashing
step three: download and install a custom rom of your choice. U could try to start with one of the roms of Shady313. They are downloadable @ http://forum.xda-developers.com/showthread.php?t=546805
be very carefull what u do, try to read several topics first like http://forum.xda-developers.com/showthread.php?t=308242
look around on the artemis forums and read the topics which concern flashing rom subjects.. u might learn a bit before you start flashing [or wrecking ] your phone

Hello, you original wm5? I have problems with the P3300, is cid locked, if you please upload somewhere wm5.and do not make the mistake of another rom on the phone without unlock CID first.

Yes, the original wm5.

How to update your HTC Artemis
Those having questions on flashing (i.e. updating) their HTC Artemis could try following these steps 1) Backup e.g. PIM Backup 2) disable standby and hibernation then remove SIM & SDHC cards 3) if necessary then cid unlock 4) recommend hard reset or update to the latest official build 5) if necessary Update SPL to latest 1.11.cmon 6) flash new rom then hard reset 7) put in SIM & SDHC cards and enjoy the result of the hard work by the developer
Also check out this thread Uspl/rom upgrade/tips&tricks
Cheers
Tom

My P3450 is nackered. lol

My farther has asked me to sort his new phone for him, not sure where he got it from but it's a HTC Touch P3450...... I think, and the Windows is in Japanese.
I did some searching and found that I needed a English Windows Mobile Rom and thats where all the problems started.
1. I cant Hard Reset the phone. I hold the 'talk' and 'end' buttons while reseting and the phone just boots into the Windows. (I do hold the buttons down)
2. I cant get the Bootloader Screen, the TriColour screen. I downloaded 'enable-rapi' and followed the instructions but the phone always boots into the Windows.
3. I downloaded 'Touch3G_2.33.CO2.V33_host_by_mu' which I belive to be an original Rom, WM6.0. When I run 'ROMUpdateUtility' it goes through until it displays 'Verifying the information on your PDA phone' but the space on the next screen where the information about my phone should be, is blank. I click 'next' and the software says it going to copy to Rom over and to wait about 10 mins, and then the USB Connection drops. This happens EVERY time.
I also downloaded a 'device_info' program but I got these results
HTC Touch device information - by dsixda
Touch version : Unknown
Device ID : Unknown
CID : Unknown
IPL : ÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
SPL : Unknown
ROM Version : Unknown
ExtROM Version : None
Operator Version: None
AKU Version : 0.5.0
Page Pool (MB) : Unknown
RAM Size (MB) : Unknown
ROM Size (MB) : Unknown
Model No. : Unknown
Part Number : Unknown
MCC+MNC : Not found
IMEI (private) : Unknown
Serial Number (private): Unknown
MAC Address (private) : Unknown
Any help with any of the above questions would be great, or maybe someone who has experienced the same problems.

Hi
There are 2 possibilities:
1 this is a chinese clone, do a search for these 2 words to understand. The clues are you can't hard reset with the normal combination and device info can't recognise it.
2 you bricked your device by not Cid unlocking before flashing the WRONG rom, Touch 3g is another device. If you can still use it normally then it's the first possibility.
BTW you also skipped the most important step before flashing: read carefully the wiki
Good luck

Many thanks Tito12, I have been looking into this a bit more but only managed to comfuss myself more. lol
I dont think its been 'bricked', if I switch the phone on normaly it loads in Windows and works fine - but in Japanese.
I have looked more into the idea of it being a 'cloned Jap WM' but nowhere seems to show any answers on being able to change the installed Rom to another one.
I have also found out that there is a difference between Elf and Elfin, I have been using the Elfin software, so I searched for Elf software and got redirected to the Elfin software.
I tried the CID Unlocking again, the info on the computer screen says its going to restart the phone into BootLoader but the phone resets and loads Windows - Aggghhhh
I also tried to Flash the Rom with a new WM I downloaded but the USB drops just before the Rom starts to install.
Also, you said 'BTW you also skipped the most important step before flashing: read carefully the wiki'. I hate to be a Noob but I have searched the XDA Forums for the answers and even tried the Wiki but still no luck. Is it something Im doing wrong.
Thanks all

Hi
This is the link http://forum.xda-developers.com/wiki/index.php?title=File:HTC_Elf.png
There's no japanese clone, chinese clone is a device that looks like the Elf/in but cannot be flashed with winmo tools. There are a couple threads dealing with it but AFAIK you have to find other ways to change the rom (if they exist).
Do you see IPL and SPL when you are in bootloader?