Related
Hi
I think title says most of it.
I need push email from my companies corporate email system.
We have a Blackberry server but I have yet to find a working Blackberry client for the Wizard?
On my old PDA2K I have been using Smartner Duality which worked great HOWEVER this does not seem to be compaitble with the Wizard so suddenly I have lost my email capability and need to get it back urgently.
Any ideas out there folks?
Cheers.
Robin
PS Smartner client on my desktop in the office used to 'forward' all my outlook mail via a special server they had and thence to my PDA2K.
It is this kind of functionality I am lookiing to replace UNLESS someone actually has the Blackberry client software!!!!!!!!!!!!!!!!!!!!!
for MS's push you'll need to wait for a ROM update with AKU 2.0
for the time being you can just set your wizard to sync with your exchange server over the net (wifi/gprs etc) every x minutes
You can try vgsmail by geoffreycross to be found in the thread 'push-email now available' it's developed for 2003 & there are posts by yzzard to get working under 2005 as well. Need to add some reg.keys manual.
Cheers, M
DeanJ said:
for MS's push you'll need to wait for a ROM update with AKU 2.0
for the time being you can just set your wizard to sync with your exchange server over the net (wifi/gprs etc) every x minutes
Click to expand...
Click to collapse
I WISH.
My company is running a REAL OLD version of Exchange server and our Firewall will not allow PDA's to connect!!!!!!!!!
Unfortunately this is not an option for me.
Robin
oltp said:
You can try vgsmail by geoffreycross to be found in the thread 'push-email now available' it's developed for 2003 & there are posts by yzzard to get working under 2005 as well. Need to add some reg.keys manual.
Cheers, M
Click to expand...
Click to collapse
Hi
I don't think we have IMAP enabled on our mail server and I would still haev a firewall problem so this won't work for me either. :evil:
Robin
Do they support the imap protocol? if so try vgsmail.
Sorry didn't catch your last post, forget this one pls.
I doubt they actually block PDAs since Activesync just runs over port 80 and the mail apps just use standard mail ports. More likely they don't have the appropriate software set up to active sync. Sounds like you might be better off waiting until the next ROM updates (Rumors put it as close as this week, but deffinetly before the end of Q1 this year) and possibly looking into a hosted exchange solution and having your work email forward there.
Robster,
I don't know if Vodafone offers the same thing as T-Mobile here in the states but see if they have corporate email access available, T-Mobile does and it works ok, similar to Smartner (i used that when I was running 2003SE) it works on my network and it is really locked down from outside access and they have disabled pop and imap access plus we are running Lotus Notes (man it sucks)
Having spent the past day or so struggling to get my shiny new HTC Wizard syncing correctly with Exchange 2003 I thought I would post the solution...
This only applies to those of you using ActiveSync to communicate from a WM5 (and possibly earlier?) with an Exchange 2003 server with SP2. SP2 looks handy for mobile users as it introduces HTTP direct push (well, it will shortly..) among st other features - this is the reason that I chose to install it.
Once installed, it allows a range of Mobile Access settings that include direct push (only actually available once MSFP devices - or patches - become available... Q2 seems to be the best estimate) as well as some interesting security features that allow a remote wipe of sensitive data, should a WM5 device be stolen/lost.
One of these security settings is to require a password on the handled device - a great idea... DON'T SET IT!! None of these security settings work with non MSFP devices - they throw a general server access error 85010004. So the server setting to check, on your Exchange 2003 SP2 server is:
(DOMAIN) > Global Settings > Mobile Devices
Click the "Device Security..." button
Make sure that the "Enforce password on device" checkbox is cleared - at lest until you have MSFP devices around
After that you can correct any other 85010004 or 85010014 errors using the advice from the Microsoft KnowledgeBase (have fun!). This SP2 problem isn't listed there yet (I got it, eventually, from a MS partner tech support site).
Hi Guy,
Have you been able to get Push to work? I installed the Exchange service Pack and enabled HTTP push. My WM5 wizard does a manual sync fine via GPRS, but when I check off realtime receipt, it keeps asking me for the phone's SMS number...
Have you encoutered this prob? I wonder if it makes a dif if my Phone OS is French while Exchange server is in English
Thanks
footang
Without the MSFP (which should be available VERY soon?) you have to rely on Exchange Server doing a 'fake push' using SMS... it sends an SMS to your device to tell the device to connect (over GPRS) to pick up new mail. This is NOT a proper push solution...
My understanding is that MSFP updates both the WM5 device AND the Exchange Server, enabling the server to implement true push... I'm seriously considering moving my Exchange to a hosted provider (probably Cobweb) as I have plenty of minor issues running Exchange 2003 on a small SBS server... Cobweb tell me they will have MSFP live this month.
I will let you know how I get on...
Guy,
I installed the latest QTEK Rom and push works great. The only prob is that it doesnt vibrate when the phone is in standby mode to let you know an email arrived.
cheers
Has anyone ever tried this out?
I am not sure if you need to install the server application on you workstation or on the actual exhange server. Would like to give it a go, as my company I work for is so slow in implementing any kind of mobile mail acess (we will have WM10 with 8mp camera pocket pcs before my work has mobile mail access). :shock:
you could try intellisync Wireless email http://www.intellisync.com/pages/Products/Express/
I have a similar problem with my company being a bit slow on the uptake...this works perectly...really pleased.
You install an application on your desktop and on the device (all very simple) The desktop app syncs your mail etc to a webserver, then the app on the universal connects to the webserver and sync it down onto the device. Very slick. Bear in mind that you have to leave your desktop logged in to your corporate network all the time, which isn't a problem for me as locking the pc doesn't affect the functionality.
I have seen that, but I don't want to use 6 different programs and places to sync. My dad has Intellisync Mobile Suite 6.2 on his Jam and works like a charm, but I can't get my hands on the original installation package.
I can access my work's e-mail via the web through webmail, but I don't know the settings like port numbers etc to get my Jam configured to connect. Is there anyway one can find out these settings without asking IT, as they are still testing it and won't give it to me at this stage.
Surely if you can connect to webmail (exchange), then my Jam should be also be able to connect. Imate Mail also uses webmail and it works on the JAM.
VoodooBOB said:
I have seen that, but I don't want to use 6 different programs and places to sync.
Click to expand...
Click to collapse
Not sure what you mean...there's one app on the pc and one on the ppc.
cdally said:
VoodooBOB said:
I have seen that, but I don't want to use 6 different programs and places to sync.
Click to expand...
Click to collapse
Not sure what you mean...there's one app on the pc and one on the ppc.
Click to expand...
Click to collapse
I was just being sarcastic.
I know on 2 apps, but you still have a "middleman" where you data needs to be sync from the pc, then from there to the ppc, back to the web server and again back to the pc. I want to go straight to the exhange server, which I should be able to do if I can get my work's webmail settings.
I see! Have you looked at xmail from o2...similar but your ppc connects directly to the agenct on the desktop...
it does
it works so far, but it is a pain to configure.
i hooked it up to my mail server.
with the admin tool you need to (under win or x) configure a user, device and principal and there you go.
what the manual does not tell you: you have to replace PipelineManager with PipelineManagerGeneric in ds-server/config/Funambol.xml to get it to work with your IMEI, or configure your device with IMEI syncml ..
It smashes my funny german umlauts, though. There is a patch (already included in Funambol) that should configure my internal storage to use utf-8, still its using internal iso-8859-15 (what ever that is for..)
I didn't get it to Unicode until now..
I have not tried to connect it to my mail server.. and i have not tried push email yet..
Stefan
I managed to get exhange activesync to work. But since last night I can't get internet access via GPRS and this morning I can't get VPN access. No nothing wants to work anymore.
Looks like I have to reload my ppc and start from scratch, I have checked all my settings and see nothing wrong.
So I reloaded my Jam this weekend, connected to the work's mail server via GPRS and got my stuff.
Came to work this morning, changed nothing on the pc's settings, plugged in my Jam via USB, pressed sync and it connect without giving me any funny error messages that I got on Friday.
It is weird that it works now with the same setttings and now juts because I reloaded my Jam, it works. :x
help with funambol
trying to get funambol to work on my xda iis 2003se, anyone else got it working with the push email ive set it up how the guide says but i dont get where the log in info goes for it to get your email. anyone willing to do a step by step walk through.
Hi all, im kind of new to this but i just read about push email with exchange server and i was wondering how i could use it with my mda vario. I've already installed an updated rom with push email but i dont know how to use it. can any one fill me in on this? thanks for any help.
You need a Exchange 2003 server with at least SP2 installed. Also a UMTS/GPRS connection because is not working over WIFI.
Bitfrotter 8)
Go to www.mail2web.com, sign up there. Than put the settings from the website in the Exchange Server settings in Active Sync on your PPC. Set your current email address to automatically forward your email to your mail2web email address. Enable GPRS and enable push email from the Comm Manager and bingo, push email is yours.
Ok, ive already signed up with mail2web but i want to automatically retrieve hotmail emails. i don't see an option on hotmail to forward all my emails to mail2web. am i missing something here? sorry, im inexperienced and all and these are probably lame questions and all. but please help me out. after reading that article i got hyped up in doing this. thanks for any replies.
Bitfrotter said:
You need a Exchange 2003 server with at least SP2 installed. Also a UMTS/GPRS connection because is not working over WIFI.
Bitfrotter 8)
Click to expand...
Click to collapse
I've gotten DirectPush to work over WiFi... Maybe that was an earlier ROM version though... I don't recall the circumstances under which I got it to work.
MS says that Direct Push does not work over WiFi. WiFi does not allow disconnected connections (in other words, a connection that allows for the data stream to be suspended). If WiFi did it, it would require a continuous connection that would drain the batteries at a very rapid pace.
Setting up Exchange for Direct Push is pretty easy. I set up ours in about 5 minutes.
One of the coolest things you can do with a correctly configured Exchange 2003 system is with the Mobile Admin pack (free download from MS). It allows you to tell the PDA that it needs to "self-destruct" in case the phone is stolen. A remote wipe will do a hard-reset on the phone, deleting all data not stored on an external SD.
I usually get my email on the MDA faster than Outlook on my desktop.
If any Exchange admins are out there, I can post how to set it up if anyone needs help.
exchange/activesync
Yes please!
Hotmail has deleted the possibility of forwarding mail automatically a few years ago in the free version, only Hotmail Plus subscribers can use this option. With gmail however it is still free. So a basic hotmail account will not be able to use Push over Exchange. You can however sign in to MSN Messenger on your device and will then be notified as soon as an email arrives on the hotmail server. This will cost you extra data charges though, since contacts coming online will also result in data transfer to your device.
Romp said:
MS says that Direct Push does not work over WiFi. WiFi does not allow disconnected connections (in other words, a connection that allows for the data stream to be suspended). If WiFi did it, it would require a continuous connection that would drain the batteries at a very rapid pace.
Setting up Exchange for Direct Push is pretty easy. I set up ours in about 5 minutes.
One of the coolest things you can do with a correctly configured Exchange 2003 system is with the Mobile Admin pack (free download from MS). It allows you to tell the PDA that it needs to "self-destruct" in case the phone is stolen. A remote wipe will do a hard-reset on the phone, deleting all data not stored on an external SD.
I usually get my email on the MDA faster than Outlook on my desktop.
If any Exchange admins are out there, I can post how to set it up if anyone needs help.
Click to expand...
Click to collapse
that would be awesome if you know of a tutorial anywhere on this..
so by creating an exchange server as romp said, you can sync any email including hotmail? well that's really a bummer that microsoft disabled forwarding on hotmail. Its mainly my primary email which all my friends/family know. so it would be a miracle if anyone knew how to sync hotmail without subscribing to their hotmail plus.
Well, getting outside emails are a bit more complex. This is usually for a business, but there are plenty of POP-to-Exchange plug ins that would allow getting Hotmail emails. Of course, you would need the Hotmail Plus for the POP.
http://www.slipstick.com/exs/popconnect.htm
My answer was more concerning the Exchange Direct push question, not the hotmail one.
Where I work (yes, I did set up the Exchange system) we have GFI spam filtering and virus filtering (www.gfi.com) and they have a POP2Exchange bridge included. It just checks the account, downloads any POP emails, and drops it in the right mailbox.
Exchange is a complete system, not just mail. It has webmail, Windows Mobile direct push, calendar, contacts, and more. Unless you are in a company with Exchange or Small Business Server, its not a cheap thing to do for a home network.
If you DO have Exchange at your office, run to the IT guy and hurt him until he sets your phone up on it. Its all the functionality of Blackberry and more, built into Exchange.
I'll write that tutorial, g0nk.
ok so if we go the mail2web route... i dont need to install exchange 2003 on a pc myself? does it only work on windows server 2003?
im interested in doing this at my job but i want to make sure it is not too difficult
edit.. well we have our own domain email addresses so the [email protected] is not an option..
any suggestions?
Romp said:
Exchange is a complete system, not just mail. It has webmail, Windows Mobile direct push, calendar, contacts, and more.
If you DO have Exchange at your office, run to the IT guy and hurt him until he sets your phone up on it. Its all the functionality of Blackberry and more, built into Exchange.
I'll write that tutorial, g0nk.
Click to expand...
Click to collapse
1) Agreed
2) I am the IT guy and it don't work on our server - the rootcertificate won't install to the PPC - an MS acknowledged problem............
3) Please forward ASAP !! Thanks !! :lol:
Is it a self published cert? Because you CAN get any externally issued cert to work just fine. We use a $15 GoDaddy cert with no problems.
The big screw up most people have with the cert (myself included) is that the cert is not correctly installed, even though it says it is.
Cheaper certs are called "Chained" certs. All certs need a path back to one of the big cert companies. So, companies like GoDaddy get approved to be second level cert issuers. IE on the PC will look at the cert and track it back to the main cert issuer. For example, the cert on GoDaddy goes from GoDaddy, to Starfield, to VeriCert. The VeriCert certificate is installed on all PCs.
Anyway, the problem is that the PC can follow an undefined cert path, the PPC can't. If you install the cert on the server, IE on the PC can figure out the whole path, PPC can't. So, the big thing is to make sure the MIDDLE CERTS are installed on the server. Even though everything seems fine, chances are that the middle ones are not (in this case STARFIELD)
The easiest way to find out if the cert is valid or not is try to get to your webmail on PIE. If you get a message about the cert, your server is not set up completely.
For my server, I had no luck until I found the Intermediary Cert and installed it. https://certificates.starfieldtech.com/Repository.go
Once that was done, my GoDaddy cert worked on the PPC and syncs went perfectly. Once the server has all the certs in the cert path installed, the PPC can validate each level. Until then, its clueless. Most people think you need to install the cert on the PPC. Its the server that needs it.
Does the self published cert only cause problems with direct push? I've got the "old" polling method working. I created a root CA on my server to sign the cert created for the web server and then turned that root CA into a CAB which was installed on the PPC. I should say that my phone doesn't have an AKU 2.xx rom on yet so I've not tested push mail.
This is all outlined in the following doc :
http://www.microsoft.com/technet/itsolutions/mobile/deploy/msfpdepguide.mspx
Also look at http://support.microsoft.com/kb/817379 if you are running a non sbs2003 exchange server in a configuration that doesn't have a front end/back end exchange server configuration. As there are some minor tweeks needed to the registry and to the default web server setup.
If you can do a remote Activesync, then DirectPush will work just fine.
A newbie Direct Push question:
I upgraded my 8125 ROM to the official Cingular June 19 version, and direct push SEEMS to be working great my my Hosted Exchange provider. When new email comes in to my Exchange server and/or a task / calendar / contact is changed on the desktop Outlook client, those get pushed quickly to the 8125.
Problem is, it doesn't seem to work in reverse. For example, IF I get an email pushed to me on my PDA, I read it and delete it on my PDA.....that deletion action is NOT getting syncronized back to my Exchange server. Is that by design, or is indeed something wrong?
Thanks in advance!
not sure if it helps, but you can change when pocket outlook deletes mail, there are 3 options:
on connect/disconnect
immediately
manually
I dunno if changing that will help you at all, but its in the pocket outlook options.
I'll shut up now, in case I misunderstood
jmel said:
not sure if it helps, but you can change when pocket outlook deletes mail, there are 3 options:
on connect/disconnect
immediately
manually
I dunno if changing that will help you at all, but its in the pocket outlook options.
I'll shut up now, in case I misunderstood
Click to expand...
Click to collapse
I appreciate your reply, but my question is beyond that......it centers around Driect Push.....my thinking is, regardless of that setting you referred to, once the email is deleted on the PDA, the PDA should "reverse-push" that deletion to the Exchange server, and mine does not seem to be doing that.
I hope that is a little clearer?
No, his answer was right. The reverse of the Push is not the same. You have to set the options as Jmel suggested. Its basically to save data.
This allows you to go through your mail, delete all your spam and crap, then update the server. Doing so immediately would be a waste. Recieving/sending emails is considered vital, deleting them...not so much.
Hi
I used to be able sync to my work Outlook email via ActiveSync / Outlook Mobile Access (OMA). However, yesterday my work IT department disabled OMA on my Exchange server as they do not support anything other than the blackberry. Despite my protestation they are refusing to re-enable OMA. This leaves me with a big issue!
Does anyone on here know of a third party application that can sync outlook emails and calander using Outlook Web Access (OWA)?
I have found an application called Chronobis which is able to sync from OWA but only one way i.e. deleted items on Chronobis will not delete from my Outlook inbox and calendar appointments added won't sync to my outlook calander (or so I believe). Whilst this is a good start it really doesn't get me to where I need to be.
I am desperate to sync my work outlook emails to my new HTC HD2 (its the main reason I got it)!
Anyone got any other ideas / know of any other applications?
Would really appreciate any suggestions.
Thanks in advance.
Yes, you can use a service called Seven.
Thanks for your response.
I've had a look and it seems this could do the job! Seems that the only way to get it was to join the beta programme which I've done but when I put my the vendor in it doesnt give me the HD2 as an option.
Any ideas what handset I should choose that will work with the HD2?!
I've also read compatibility issues with Manilla 2.5 in their forums. Has anyone managed to get this working successfully on an HD2? Also, are you able to move emails to your different folders using this app and have them sync with the exchange?
Is this the best / only app out there for my requirement?
Sorry for all the qus!
Thanks again.
ActiveSync uses OWA. Put in webmail server, username, password and works.
OWA still works, like afterburn said, i got my calendar, email and tsks to synch. lol now all my contacts are on my university email accounts, pretty cool tho.
no need for thirdparty, active sync does it.
dont know what OMA is. but what you want is exactly what OWA gives you.
dont set your owa using HCT SENSE/MANILA SETTINGS. do it through normal out look ad account way. HTC tick boxes for tasks, calendar and other stuff are greyed out and only email is available.
but on the standard outlook mobile all the settings are there.
need a run through of how to set it up?
Thanks for your responses guys.
OMA is office mobile outlook. It is a setting within the exchange server which either allows or disallows a mobile device to access emails through the mail app. Having OWA does not mean that you will be able to access your emails from a mobile device (except through the mobile browser).
Activesync uses OMA rather than OWA so at the moment I'm stuck!
As a result I need an app that syncs via OWA.
Seven seems to be able to do it but I could do with any answers to my qus above.
Happy to be proved wrong on this but one day it was all working fine and the next my exchage server settings had been changed and it stopped working.
Any exchange server admins on here who can confirm my thinking is correct?
Gooner4_1998 said:
I've also read compatibility issues with Manilla 2.5 in their forums. Has anyone managed to get this working successfully on an HD2?
Click to expand...
Click to collapse
I'm using Seven on HD2. There were compatibility problems with custom ROMs on other devices based on leaked Leo Manila.
Why don't you use Blackberry Connect on your Wm device? That way, you can sync the same way as Blackberry devices. Of course that requires you to have BB access rights, but since they are so BB happy, you may be able to get that.
You can get it here: http://www.htc.com/us/mobile/connect/8925/install/default.html
Of course it is not specific for the HD2, and I have no idea if it'll work, but it is worth a try.
BB connect sounds like a good idea, wasn't aware it was a possibility, thanks.
I actually have a BB from work so I know that I am set up for it. However, I work for a company that are very keen on security so there is no way they will give out the settings I would need (its set up by the IT department and then just given to you).
Is there any way to get the info / settings I need from my current blackberry? Ive had a look on it and can't see anything obvious.
Just checked through some documentation on BB connect and unfortunatley it requires that I install ActiveSync and BB Connect on a computer connected to my works network.
As I dont have admin rights on my work laptop I won't be able to do this (unless anyone knows how to install programs without being an administrator!).
Looks like Seven might be the bset solution!
Vangrieg, which handset did you choose to set up for the HD2?
Thanks
I admin an exchange server, the most common reason for OMA not working is if there isnt a valid ssl cert for the domain, but i can confirm that as you mentioned, it will deffo not work if mobile access is turned off on the user account (there are 2 seperate options for web and mobile access)
i dont see any decent reason why a server admin would disable it, he must be on a power trip or sommert!
Thanks lancemate.
Could the valid ssl cert be the reason even if others in my company are still able to access as before? Its only affecting me. I've set up one of my collegues mail accounts on my phone to see if it still worked and it did without any issues.
When I called IT they said they hadn't changed any of my settings so I had assumed that OMA was the issue. I asked them to check and to re-enable and they told me they were unwilling to even look at my settings!!! Our IT department has been moved to India which makes it even harder to get any help!
Could an ssl cert suddenly just expire?!
Is there anyway of me to get a valid ssl cert for the domain witout going through IT to see if this is the issue?!
Been doing some more research and want to see if getting an ssl certificate onto my phone will make it work. Absoloutely no idea if it will work but its the last thing I can think off!
Is it possible to download the SSL certificate from my OWA site?
If I double click on the padlock in the bottom left corner I can get the certificate details up on the "details" tab (although there are loads of files and I don't know what I'm looking at!). When I click "copy to file" the export wizard come up but I have no idea where to go from there!
Anyone able to offer any assistance please?
Also, I'm sure this is a stupid question but would I need to put this certificate on my phone or could I use a different one?!
Thanks
It cant be an SSL Cerificate issue if your Colleague's account works on your device.
It MUST be that OMA is disabled on your account or something else is horribly wrong. As mentioned above i cant see any reason why an Exchange administrator would disable OMA.
Can you connect to your account using activesync on a different device to check whether its the phone or settings on server side?
To help you with using Blackberry Connect as a possible solution here are some resources on how to run programs that require admin level on machines you havent been given admin rights to. Some methods cover your tracks completely and others simply let you create/amend and delete windows accounts and associated rights in whatever way you need.
i would suggest using the first link to create a bootable usb stick that loads a modified linux command prompt. You can then use this to give yourself local admin rights.
http://pogostick.net/~pnh/ntpasswd/
http://www.jms1.net/nt-unlock.shtml
http://internetbusinessdaily.net/how-to-hack-a-window-xp-admins-password/
I've tried to set up on 2 other phones, bith with no joy so I'm guessing its the server side rather than the phone.
Is there no way that its anything to do with the ssl certificate? Are they set up company rather than by user? Will my suggestion of putting a certificate on my phone definately not work (if I could even find out how to export it from OWA)?!
I also cant see why the OMA would have been diabled so thinking it must be something else!
Thanks
I share Gooner's concerns and look forward to finding a solution. 1) My company has not yet enabled mobile devices to sync via Outlook Web Access. 2) Blackberry Connect does not yet work on HD2. There is a thread for BBC on this very same forum.
I am confident that a solution will soon emerge for 1) and/or 2).
Audio Oblivion said:
It cant be an SSL Cerificate issue if your Colleague's account works on your device.
Click to expand...
Click to collapse
Well, sometimes you need to install the certificate manually on your device to make it work. That's the case where I work - we use a self-signed certificate.
I use zarafa as a direct replacement for exchange, it syncs my emails,calendars, contacts etc.
It allows push email as well.
Hi JMes
After looking around I have found it appears that there are 2 services that will allow you to sync a mobile device using OWA, even if it is not set up for OMA.
Seven - Currently in beta but others have had success with this service on an HD2. I believe that it will sync Calendar, Tasks and Email.
Emoze - Also allows you to check outlook via OWA and offers a free service or a paid for service. Paid for service allows you to remove the "sent from emoze" tag allows attachemnts to be sent up to 2mb (rather than 100kb). Think it costs 10 euros a year.