internet sharing - 8525, TyTN, MDA Vario II, JasJam General

im having a little problem with my internet sharing. when i try to download files sometimes it wont start or it will stop in the middle of downloading. or when i view a clip it only loads for about 8 seconds. Has anyone had this problem? do anyone know how to solve this?

sounds like a connection issue.
Ensure you are in a good Mobile signal area and ensure your phone is close to your computer (if using bluetooth)
you could also try connecting the phone by USB to rule out a bluetooth issue. if this is still an issue this is likely to be a connectivity issue with your carrier.
try downloading the same file directly from your phone - this will rule out this being an issue with internet connection sharing.
cheers
steve

im with att and this just recently started happening. I use the internet sharing which came with the phone. is there another one i can download?

Related

How to use P3600 as HSDPA Modem

I want to setup my P3600 (English ROM) as a 3.5G modem for my PC but not successful yet. The Telco service staff has no idea too and pass me a manual for dopod 838 pro. The mentioned programs are not there, nor in my dopod D810 CD.
I can:
- Activesync using USB
- Activesync using bluetooth
Question:
- Should I use the same HTC modem dialer on my PC for XDA?
- Should I use the Start->Program->Internet Sharing?. It allows me to choose bluetooth or USB to PC but both not working too after connect.
Anyone successfully connect their PC via P3600 using HSDPA, pls share the steps. Many thanks.
Eventually, I figure it out myself.
Forget all the HTC modem dialer or wireless modem program as in Xda.
1. Start->Program->Internet Sharing on WM5.0
2. Select the connection type: USB or BT
3. Select "Connect"
4. Then connect the USB and done.
For BT, it would have instruction for you to start PAN now. done.
Woo, it's much easier than the HTC dialer. But now my problem is VPN problem with my telco.
Thanks very much for reporting this info back, it will come in useful when I get my trinity!
mobiler2 said:
Eventually, I figure it out myself.
...
Woo, it's much easier than the HTC dialer. But now my problem is VPN problem with my telco.
Click to expand...
Click to collapse
just 2¢...
Sadly, because Internet Sharing is actually a NAT server running on your phone, it could prevent you from using 'classic' VPN. You can find more details by googling for 'VPN over NAT'.
for VPN purposes you can always use old good wireless modem mode. it works well.
I don't think it is related to NAT. As long as the VPN ports are opened, it should work. I am using a Wireless router at home and no trouble at all for using VPN under NAT.
Checked with telco. They can enable it for me with extra charge/month. and also the traffic would be charged as expensive GPRS plan. What kind of service!!!
Think twice before subscribing. I used "WonToFee / 1-1-" . The sales that say it can work for VPN may not even know what a TCP port is.
Anyone has use VPN over HSDPA with another telco? e.g. SMOOTH TONE
Hello,
This thread is a bit old, however I think it is related to my problem: I am trying to use Internet Sharing on my P3600 (ROM 1.23.405.2 / Radio ROM 1.38.00.11). Using BT, it works just fine. However, when connected on USB it works fine only for the first time. When I tap "disconnect", the HSDPA connection is stopped, but the status keeps displaying "Connected". There is now way to use Internet Sharing again before a soft reset (Windows XP wouldn't even recognize the P3600 again). Is this a known issue? I have googled a bit, but I haven't found any similar problems.
Thanks!
shefful said:
Hello,
This thread is a bit old, however I think it is related to my problem: I am trying to use Internet Sharing on my P3600 (ROM 1.23.405.2 / Radio ROM 1.38.00.11). Using BT, it works just fine. However, when connected on USB it works fine only for the first time. When I tap "disconnect", the HSDPA connection is stopped, but the status keeps displaying "Connected". There is now way to use Internet Sharing again before a soft reset (Windows XP wouldn't even recognize the P3600 again). Is this a known issue? I have googled a bit, but I haven't found any similar problems.
Thanks!
Click to expand...
Click to collapse
Hi shefful,
I have had the same problem. I have come across a possible solution while browsing forums. When you need to disconnect press and hold down the red end call button for a few seconds and this disconnects the modem. I haven't tried this yet but it's worth a shot.
regards
Adam
shefful said:
Hello,
This thread is a bit old, however I think it is related to my problem: I am trying to use Internet Sharing on my P3600 (ROM 1.23.405.2 / Radio ROM 1.38.00.11). Using BT, it works just fine. However, when connected on USB it works fine only for the first time. When I tap "disconnect", the HSDPA connection is stopped, but the status keeps displaying "Connected". There is now way to use Internet Sharing again before a soft reset (Windows XP wouldn't even recognize the P3600 again). Is this a known issue? I have googled a bit, but I haven't found any similar problems.
Thanks!
Click to expand...
Click to collapse
Hi shefful,
I have had the same problem. I have come across a possible solution while browsing forums. When you need to disconnect press and hold down the red end call button for a few seconds and this disconnects the modem. I haven't tried this yet but it's worth a shot.
regards
Adam
Hi adamwolfe,
Thanks for your help, unfortunatelly this is not the solution to my problem. The GPRS connection ends (according to the icon on top of the screen), but the status keeps displaying "Connected". The application stops responding and can't be stopped from Settings/Memory/Runnning Programs.
Hi shefful,
Yeah, I have the same problem too. Looks like the program freezes in the Connected status. Even tried terminating Internet Sharing with Start/Settings/.../Memory/Running Programs and relaunching Internet Sharing.
Sometimes I get a popup message saying the remote host has terminated the connection before the program hangs. I think this may be the cause of the problem. Which mobile operator are you on?
Rebooting is the only solution so far. Fortunately the Trinity reboots in 20 seconds - one of the fastest in the PPC market I think.
Hi ayhansan,
For other reasons I needed to hard reset my Trinity and the freezing problem has disappeared. I don't know what had caused this problem, I just hope it won't happen again. If I disconnect the USB cable, the status changes to "disconnected" and I can always reconnect.
same problem here
i am connecting to laptop thru USB
after I disconnect UMTS phone syaing still connected
and want kill Internet Sharing
???
thanks
regards
mobiler2 said:
Eventually, I figure it out myself.
Forget all the HTC modem dialer or wireless modem program as in Xda.
1. Start->Program->Internet Sharing on WM5.0
2. Select the connection type: USB or BT
3. Select "Connect"
4. Then connect the USB and done.
For BT, it would have instruction for you to start PAN now. done.
Woo, it's much easier than the HTC dialer. But now my problem is VPN problem with my telco.
Click to expand...
Click to collapse
does this work with Mac as well?

HSDPA Internet sharing / modem issue

With internet sharing, my Kaiser used connect to the internet (T-Mobile mobile broadband) without problems fro the past year. Now since I got the HD, my internet connection is inconsistent. Sometimes it tries to load pages for ages, then timeouts, and sometimes it works like a charm. I don't think it's because of the signal, because network coverage seems fine (nearly always at 4 bars with HSDPA).
Has anybody been experiencing something similar ? Don't really think it's a problem related to USB because when my internet connection doesn't work when connected via USB, I sometimes switch to bluetooth, and that seems to work for a while, then it fails again.
I also tried it on a PC with XP, and had similar problems. Any ideas ?
Thanks
sbirsen said:
With internet sharing, my Kaiser used connect to the internet (T-Mobile mobile broadband) without problems fro the past year. Now since I got the HD, my internet connection is inconsistent. Sometimes it tries to load pages for ages, then timeouts, and sometimes it works like a charm. I don't think it's because of the signal, because network coverage seems fine (nearly always at 4 bars with HSDPA).
Has anybody been experiencing something similar ? Don't really think it's a problem related to USB because when my internet connection doesn't work when connected via USB, I sometimes switch to bluetooth, and that seems to work for a while, then it fails again.
I also tried it on a PC with XP, and had similar problems. Any ideas ?
Thanks
Click to expand...
Click to collapse
Hey there,
I'm experiencing the exact same problem with my Touch Diamond ...
My internet sharing via usb has been working fine for months now until this this week. Now, since monday, connection times out, loads half a page, etc. i.e. exact same symptoms as yours.
Internet sharing via bluetooth works fine.
Need help PLEASE!!!
Cheers
[email protected] G
It lasted for a few days and since last week it's working brilliantly as it should. Maybe it was just a network issue ? Did you manage to get your connection to work again ?
I also think it's network related ...
It was working fine again for one day, then it just started acting up again.
I now use the bluetooth connection instead of USB. Seems to be much more reliable and for some reason I'm getting better speeds than via USB.
I always thought USB wud be much quicker.
If only our ISP can get their damn act together.
Thanx for the feedback ..
Cheers
Has anyone found a solution to this problem? I'm having the same exact issue with my Raphael.
Hey... my Problem is the Internet, Data Connection to works fine very fast.... but the Internet Sharing with computer doesnt work anymore since Yesterday... but i dont know why... i flash new ROM and Radio Yesterday soo maybe thats why...
I flash Duttys V2.1 and the 1.12.25.16 radio....
Is it at all possible to use internet sharing and activesync or use the phone as a modem while using active sync?
O and O said:
Is it at all possible to use internet sharing and activesync or use the phone as a modem while using active sync?
Click to expand...
Click to collapse
So far i know active Sync Closing if you use it as Modem...
So no Sync and modem at all? That sucks, worked great for ym old Nokia.
I have noticed the following problem:
When I use my HD as a modem it functions properly for about the first 15 minutes, then HSDPA icon disappear and remain fixed only 3G icon and the connection becomes very slow.
Similarly this happens even if I use my HD with built in opera browser; besides in this manner I notice that the memory usage increases: even if I stop the internet connection and I delete cache the memory usage remain high and it is necessary to perform a soft reset to fix it.
I've tried with another sim card and GSM operator; with HSDPA and HSUPA enabled and supported by the operator, but I've experienced the same problems.
If I use my old USB or express card wireless modems I have no problems and the connection is always very fast
A ROM upgrade by HTC to solve once and for all this problem will be appreciated !!!

Final Plea - Help with proper configuration

Guys,
I have a Touch HD and I have tried as I might to get it working with Wifi and Data connection perfectly; let me explain.
What I want to happen is this:
Wifi to connect to my home router (which it does) and allow the internet and access to my network (think I have that one sorted)
Data connection to start on all Internet based applications, when Wifi is not turned on
When Wifi is turned on, this connection to be used for all internet based applications
My issue is that I can only ever get some of these working at a time. For instance, my email is set to check every 5 minutes. If my wifi is on, my data connection still fires up and attempts to grab my mail, as opposed to using my already connected wifi connection.
I think I have sorted the Wifi connection issue when connecting to my network...I used to have to switch between "Internet" and "Work" for it to identify my LAN....however Resco Explorer seems to fix this issue.
Can anyone provide a comprehensive guide as to how to achieve the above....just annoys me how shockingly implemented WinMo networking is!
Thanks again - all help appreciated.
Sorry, I have no solution for what you ask.
Wiggz said:
I think I have sorted the Wifi connection issue when connecting to my network...I used to have to switch between "Internet" and "Work" for it to identify my LAN....however Resco Explorer seems to fix this issue.
Click to expand...
Click to collapse
Lately I do have problems using my WiFi though. I have it all setup with my home router since months and had no problems. Then at some point (don't know when exactly), all programs (like the weather, opera, email) started to not be able to connect anywhere, while at the same time my HD reports it is connected to my home WiFi network.
Everything works fine (internetwise) when connected through Activesync.
I saw this "Internet" and "My Work" options too, and I also have Resco Explorer. Could you please explain what it is you have sorted out in case it helps people ?
Edit: here's the problem thread

[PROBLEM] Internet Connection Stops Responding

Hi,
I'm having this weird issue with internet connection on my Touch Pro. I'm using WM 6.5 build 24631 and 23134.
I'm able to connect to the Internet (3G) and is able to use it without any problem if I do not use it heavily, meaning light surfing. However if I use it heavily, like constant high speed download (either directly from the device or via Internet Sharing), then after a few minutes, the connection stops responding. When this happens, everything still works fine except the internet. I can't disable the data connection. Trying to do so will cause the application used to disable the data connection stops responding too. I can however enable Flight Mode, thus closing the data connection, but by doing so, I am not able to reconnect the data connection anymore. After a soft-reset, everything will go back to normal.
Does anybody out there ever experience this? If possible, a solution would be greatly appreciated.
Hmm ive been having some weird data connection trouble myself. im on a hd2 custom rom with 23134. sometimes the data connection taskbar icons show a working connection but none of my apps connect.
Maybe its related to the new builds
Mikenif said:
Hmm ive been having some weird data connection trouble myself. im on a hd2 custom rom with 23134. sometimes the data connection taskbar icons show a working connection but none of my apps connect.
Maybe its related to the new builds
Click to expand...
Click to collapse
Yes, that is what I am experiencing. BTW I discovered that if I use Internet Sharing via bluetooth, the problem would not occur.
Interesting,i would check if this problem is still active in 6.5 builds (21915),unfortunately i dont have a data plan so i can test it.
I attached Internetsharing and Browsing family from 21915 if you wanna try it but the connection package could be also in Os folder.
af974 said:
Interesting,i would check if this problem is still active in 6.5 builds (21915),unfortunately i dont have a data plan so i can test it.
I attached Internetsharing and Browsing family from 21915 if you wanna try it but the connection package could be also in Os folder.
Click to expand...
Click to collapse
Thanks for the files. I will try it out. Just now I just have to soft reset because I downloaded a big file using Opera 10. Only happens when the download speed is high. It's like it goes too fast for something to handle...
Hello guys i have the same problem but i dont need to use internet sharing havily in one minute internet sharing have stuck... i have try to contineus ping one web page and after a few secs its down.

[Q] Desire Z looses Data link following USB Internet Pass-through.

Hi,
Not sure if anyone else has experienced this issue so here goes.
I regularly connect my Desire Z to my PC in Internet Pass-through to get data for updating apps and Navdroid map updates.
No problem connecting and the data throughput is great.
However, once I have disconnected the phone from the PC I have lost 3G/HSPD connectivity. The only way to get these back is to restart the phone.
I have tried turning on Airplane mode, and then turning it off - no success.
I also tried turning off data and then turning it back on - no success there either.
Is this a known issue or has anyone else come across it. Anyone found a solution if they have, bar restarting the phone that is.. ?
Thanks,
Des. . . ; )
Yeh this also happens to me, though only sometimes. Unfortunately, all I've been able to figure out in terms of fixing it is just restarting.
Data connection is not the only thing that glitches for me with internet pass through, sometimes the other types of USB connection stop working as well (e.g. the phone will not be seen by my windows machine when put into removable drive mode after being in internet pass through) until I restart. Essentially, even though internet pass through does not always cause problems I always restart after using it since it seems to be good at glitching other things out and probably messes up things I don't even notice at first.
This has happened to me several times...
What I noticed is that whenever I disconnect the phone while it is in Internet Pass-Through mode, I couldn't get my mobile data connection to work afterwards..
So before disconnecting, maybe you can try changing your USB connection mode, say, to Charge Only. When disconnecting from that mode, mobile data works.. at least in my experience..
Hi,
Might be worth a try, that. Czechton can you try and see what sort of results you get?
Thanks,
Des. . .
I will second that - this problem occured for me everytime I connected the phone in the "internet pass through mode" - I also noticed (although I did not keep track to check if this solves the problem EVERY time) that if I change to the "charge only"
mode and then disconnect - I get back my mobile data connectivity back
cis1016 said:
This has happened to me several times...
What I noticed is that whenever I disconnect the phone while it is in Internet Pass-Through mode, I couldn't get my mobile data connection to work afterwards..
So before disconnecting, maybe you can try changing your USB connection mode, say, to Charge Only. When disconnecting from that mode, mobile data works.. at least in my experience..
Click to expand...
Click to collapse
There is another thread about this problem: http://forum.xda-developers.com/showthread.php?t=849248
Hi,
Yes. Spotted! But they have no answers in that topic unfortunately.
Arcao said:
There is another thread about this problem: http://forum.xda-developers.com/showthread.php?t=849248
Click to expand...
Click to collapse
Des. . .

Categories

Resources