Related
With internet sharing, my Kaiser used connect to the internet (T-Mobile mobile broadband) without problems fro the past year. Now since I got the HD, my internet connection is inconsistent. Sometimes it tries to load pages for ages, then timeouts, and sometimes it works like a charm. I don't think it's because of the signal, because network coverage seems fine (nearly always at 4 bars with HSDPA).
Has anybody been experiencing something similar ? Don't really think it's a problem related to USB because when my internet connection doesn't work when connected via USB, I sometimes switch to bluetooth, and that seems to work for a while, then it fails again.
I also tried it on a PC with XP, and had similar problems. Any ideas ?
Thanks
sbirsen said:
With internet sharing, my Kaiser used connect to the internet (T-Mobile mobile broadband) without problems fro the past year. Now since I got the HD, my internet connection is inconsistent. Sometimes it tries to load pages for ages, then timeouts, and sometimes it works like a charm. I don't think it's because of the signal, because network coverage seems fine (nearly always at 4 bars with HSDPA).
Has anybody been experiencing something similar ? Don't really think it's a problem related to USB because when my internet connection doesn't work when connected via USB, I sometimes switch to bluetooth, and that seems to work for a while, then it fails again.
I also tried it on a PC with XP, and had similar problems. Any ideas ?
Thanks
Click to expand...
Click to collapse
Hey there,
I'm experiencing the exact same problem with my Touch Diamond ...
My internet sharing via usb has been working fine for months now until this this week. Now, since monday, connection times out, loads half a page, etc. i.e. exact same symptoms as yours.
Internet sharing via bluetooth works fine.
Need help PLEASE!!!
Cheers
[email protected] G
It lasted for a few days and since last week it's working brilliantly as it should. Maybe it was just a network issue ? Did you manage to get your connection to work again ?
I also think it's network related ...
It was working fine again for one day, then it just started acting up again.
I now use the bluetooth connection instead of USB. Seems to be much more reliable and for some reason I'm getting better speeds than via USB.
I always thought USB wud be much quicker.
If only our ISP can get their damn act together.
Thanx for the feedback ..
Cheers
Has anyone found a solution to this problem? I'm having the same exact issue with my Raphael.
Hey... my Problem is the Internet, Data Connection to works fine very fast.... but the Internet Sharing with computer doesnt work anymore since Yesterday... but i dont know why... i flash new ROM and Radio Yesterday soo maybe thats why...
I flash Duttys V2.1 and the 1.12.25.16 radio....
Is it at all possible to use internet sharing and activesync or use the phone as a modem while using active sync?
O and O said:
Is it at all possible to use internet sharing and activesync or use the phone as a modem while using active sync?
Click to expand...
Click to collapse
So far i know active Sync Closing if you use it as Modem...
So no Sync and modem at all? That sucks, worked great for ym old Nokia.
I have noticed the following problem:
When I use my HD as a modem it functions properly for about the first 15 minutes, then HSDPA icon disappear and remain fixed only 3G icon and the connection becomes very slow.
Similarly this happens even if I use my HD with built in opera browser; besides in this manner I notice that the memory usage increases: even if I stop the internet connection and I delete cache the memory usage remain high and it is necessary to perform a soft reset to fix it.
I've tried with another sim card and GSM operator; with HSDPA and HSUPA enabled and supported by the operator, but I've experienced the same problems.
If I use my old USB or express card wireless modems I have no problems and the connection is always very fast
A ROM upgrade by HTC to solve once and for all this problem will be appreciated !!!
Reflashed my Jade from UK Orange to JADEMAN rom recently...
I don't think this is a ROm related problem (unless you know otherwise !) so I have posted in general part of forum.
Can anyone tell me how to force the phone to use Wifi to connect to the internet.
It connects via GPRS fine but i want to disable the GPRS DATA for travels abroad so I don't run up a huge data bill. I can stop the data with "NoData" app, but if I now try to connect to internet with Opera or Internet explorer if fails..
Is there something I am missing, to tell it either to connect via wifi before using GPRS data or to only connect via wifi. Do I need to create a connection ?
The create new connection page doesn't list using WiFi, bluetooth is the only "WIRELESS" type connection that appears to be offered.
Also when the wireless AP list is shown and I try to connect to an AP showing available that I have previously setup with WEP key etc, it fails to connect.
I am sure to be missing something but I can't spot what the problem is...
Any help appreciated.....
Phil
Normally Windows Mobile connects via WiFi first, if available, and only when not present it uses GPRS. That means that you do not need to disable GPRS if an WiFi-connection is established.
I have no personal experiences with "NoData". Perhaps someone else can help.
phil-w said:
Can anyone tell me how to force the phone to use Wifi to connect to the internet.
It connects via GPRS fine but i want to disable the GPRS DATA for travels abroad so I don't run up a huge data bill. I can stop the data with "NoData" app, but if I now try to connect to internet with Opera or Internet explorer if fails..
Is there something I am missing, to tell it either to connect via wifi before using GPRS data or to only connect via wifi. Do I need to create a connection ?
The create new connection page doesn't list using WiFi, bluetooth is the only "WIRELESS" type connection that appears to be offered.
Also when the wireless AP list is shown and I try to connect to an AP showing available that I have previously setup with WEP key etc, it fails to connect.
Any help appreciated.....
Phil
Click to expand...
Click to collapse
MvBoe said:
Normally Windows Mobile connects via WiFi first, if available, and only when not present it uses GPRS. That means that you do not need to disable GPRS if an WiFi-connection is established.
I have no personal experiences with "NoData". Perhaps someone else can help.
Click to expand...
Click to collapse
AFAIK the moment you invoke any app that requires internet connection (weather update, activesync, opera) Jade invokes data connection first (3G, GPRS, etc) That's how it works on my set. Unless you invoke Wi-Fi connection first, then data connection is ignored.
I have had a bad experience that even if all setups are ok Wi-Fi conn thru Ap fails.
Corrected such a way;
Under 'Wireless /Lan' settings
Power mode should be brought to 'best performance'
azahidi said:
AFAIK the moment you invoke any app that requires internet connection (weather update, activesync, opera) Jade invokes data connection first (3G, GPRS, etc) That's how it works on my set. Unless you invoke Wi-Fi connection first, then data connection is ignored.
Click to expand...
Click to collapse
That's what I meant: You have to activate WiFi by yourself to prevent jade using GPRS (etc.). Your description is more precise, I did not make it clear enough. Thanks for correction.
Hi and thanks for replies so far...
I have just done a hard reset to make sure I haven't loaded anything that may mess up the wifi connection... Even when wifi is on and I am connected to a wifi access point OK it still uses gprs/3g not wifi..
Back to the "drawing board" I think...
Any more ideas please...
Phil-w
with this app you can disable or enable data connections as you please.
there is another app here in the xda that will disable data when roming automatically, but i don't remember the name.
faria said:
with this app you can disable or enable data connections as you please.
there is another app here in the xda that will disable data when roming automatically, but i don't remember the name.
Click to expand...
Click to collapse
Hi faria
Unfortunately I find it better to go into connection manager, select airplane mode, then enable wifi. Then do any surfing, live messenger etc. Then once finished go back into connection manager, re-enable phone.
Like others, I'm on Orange, wifi no longer stays the internet source even if it is connected. I have it on all the time, but if I use the internet, I have to go through the above procedure or it costs me credit through Orange.
Janeway
janeway said:
Unfortunately I find it better to go into connection manager, select airplane mode, then enable wifi. Then do any surfing, live messenger etc. Then once finished go back into connection manager, re-enable phone.
Click to expand...
Click to collapse
The only disadvantage is here is that, you'll miss calls when there are incoming calls because your phone is inactive (while PDA is). You can just disable data connection (CommManager - Data Connection - off) and leave wi-fi connected.
Like others, I'm on Orange, wifi no longer stays the internet source even if it is connected. I have it on all the time, but if I use the internet, I have to go through the above procedure or it costs me credit through Orange.
Click to expand...
Click to collapse
Just wondering.. how you identify which connection is being used, wi-fi or 3G/GPRS when both are connected.
What if you disconnect data connection (3G/GPRS) without activating the airplane mode, can you surf using wi-fi connection.
One possible reason - set connected to the AP via wi-fi but AP is not connected to internet, thus set seeks 3G as another route to internet.
Hi azahidi, thanks for taking time to reply to me . Your points as follows:
Yes, missing calls is the disadvantage, but I use my pda more for data and hardly any calls, so not so important for me, but obviously we be much better if that were possible as I do sometimes forget to swich back. If I disable the data connection, it automatically re-initializes itself as soon as ANY data is being transmitted - even with just wifi active - except when it is in airplane mode. This is a new thing for me with the Jade, didn't have that problem before with my previous HTC phone.
There is an icon for the 3G - when its in use it shows it - it goes from being a large G in a square to a smaller one with signal bars.
Wifi is definitely connected, I surf online with it all the time.
Its like 3G has priority over wifi - there should be a way to change that.
Hope the above makes sense.
Janeway
I'ven been using 'Nodata' succesfull the last past months, it does it's job well, but i'm not on Orange as you are, that might be the difference.
Just to be sure i've also changed my settings:
start > settings > connections > connections > advanced > select network > My work network (twice).
and
start > settings > connections >advanced network > uncheck HSDPA and in SMS choose 'GSM'
(all is translated from Dutch, hope i used the right words)
Thanks Nirak.
One of my settings was wrong - I should have known that from last time, but my brain's elsewhere at the moment!
Must have upset it when I flashed
Cheers for now.
phil-w said:
Hi and thanks for replies so far...
I have just done a hard reset to make sure I haven't loaded anything that may mess up the wifi connection... Even when wifi is on and I am connected to a wifi access point OK it still uses gprs/3g not wifi..
Back to the "drawing board" I think...
Any more ideas please...
Phil-w
Click to expand...
Click to collapse
Phil, can't you simply switch the "Data Connection" on/off switch to 'off' ?
I have it in the Comm Manager right at the bottom. The Wi-Fi and Phone could be left 'on'. I can't try if it works because I only use the phone on 2G.
Joe
jfranek said:
Phil, can't you simply switch the "Data Connection" on/off switch to 'off' ? I have it in the Comm Manager right at the bottom. The Wi-Fi and Phone could be left 'on'. Joe
Click to expand...
Click to collapse
That's how it should work actually. Either one, Wi-Fi or 3g/GPRS. But what phil is saying is that it also activates data connection (3G/GPRS) even when wi-fi is connected.
On my set, and in my network (not Orange but standard GSM).. this is how it works :
The moment I invoke any application that requires internet connection (weather update, activesync, opera, etc) Jade invokes data connection first (3G, GPRS, etc). Unless if I invoke Wi-Fi connection on first, then data connection is ignored, it will stay off.
So what I normally do is, whenever I want to use internet, I connect using wi-fi then browse the internet. If there is no available AP, then I turn off wi-fi and continue browsing , which is then connected using 3G/GPRS/EDGE?HSDPA
azahidi said:
(...) The moment I invoke any application that requires internet connection (weather update, activesync, opera, etc) Jade invokes data connection first (3G, GPRS, etc). Unless if I invoke Wi-Fi connection on first, then data connection is ignored, it will stay off.
So what I normally do is, whenever I want to use internet, I connect using wi-fi then browse the internet. If there is no available AP, then I turn off wi-fi and continue browsing , which is then connected using 3G/GPRS/EDGE?HSDPA
Click to expand...
Click to collapse
This is the way it normally works and should work under WindowsMobile. The Orange-ROM seems to be "manipulated" by the provider (?) not to work in this desirable way. All (or some?) Orange-ROM-Handsets seem to activate the data connection (3G/GPRS) every time ignoring the established Wi-Fi-connection. This rises the providers business volume.
It would appear to be correct about orange having had the method of connection changed.
I have just found and installed a different RADIO.ROM to my Orange Touch 3G and now it appears to connect as required.
Still not 100pc happy but will post my observations later with the rom numbers if it helps anyone else out..
Phil-w
Look on the HTC JADE reflashing on this site
Hi All,
There is no way around the Orange apps to enable WiFi, but I successfully reflashed the Roms in my Orange touch 3g yesterday.
Have a look here for the details on what to do:
http://forum.xda-developers.com/showthread.php?t=514406
Follow the instructions carefully, and I chose to install the Stock HTC ROM 1.40.721.2 from the ROM post.
Wifi is then free....
)
Well I appear to have got around the Orange Unique problem.
I upgraded the Rom on my Orange UK Touch 3G to the Jademan SuperRom V3. That got rid of the Unique side of things but with no improvement with Wifi connectivity.
The connectivity problem with wifi still caused problems, the internet connection would NOT use wifi even if I disabled the GPRS / 3G data connection with "NoData" It just returned a message saying it had failed to connect.
I decided to find a new radio rom image which I managed to on this Jade forum. I flashed the new rom and tested the same connections again. This time the wifi connected via Wifi first and without any problem... It would appear that flashing the Jademan rom didn't update the radio as well, I needed to update the radio as well.
The clue may be in the radio rom version number,
Original orange 0.29.30.U23
New Radio rom 0.41.30.12
A assume that the U in the orange rom refers to "Unique", which now I have replaced it, it appears to have cured the wifi problem and it is working just as any other Non-Orange Jade / Touch 3G does....
I have not noticed any problems with any other radio related issues since the upgrade, GPS, 3G/GPRS etc all seem to be fine.
I do find that the phone does struggle to connect with some Dlink AP's though... It may be a problem with the Dlink more than the phone but I still need to do more tests on that.
May be that will help a few other people out there...
Phil-w
Hi Phil,
I had exactly the same problem!
Started with an unlocked HTC Touch 3G with Orange customised ROM and then replaced it with the SuperROM. WiFi was unusable so (having read your post) I re-flashed with the standard ROM released from HTC and then re-flashed the SuperROM. This gave me the same Radio ROM that you show above however the WiFi problems seemed to be no better.
While I liked the idea of having the SuperROM I have gone back to the latest standard HTC ROM and all seems to be well.
John
Hi John,
My wifi now seems fine except not liking Dlink AP's for some reason.
I don't even need to stop gprs data with NoData etc, if there is a wifi connection available that I have setup previously it will use that rather than GPRS..
I appear to have "de-Oranged" it !!!
What probs do you still have on your Touch 3G ??
Phil
How do I disable the phone from auto connecting to gprs? I tried testing it by launching opera without switching on wifi. The phone still connects through gprs although I turn data connection off. It will turn data connection on by itself. Even when I switch wifi on and want it to connect through wifi instead, it is still connecting through gprs. How do i solve this?
When wifi is "connected" (not only "on"), it uses wifi, no dataconnection.
If you really don't want a dataconnection, use something like NoData...
i tried NoData but it's not working. i'm using official htc wm6.5 rom.
Sorry I cannot be more precise because I don't use it anymore, but I remember there was an option to block data connection in HDTweak. Is that you want? Block dataconnection permanently? If so, you could alternatively delete your mobile operator connection in Settings/Connections. If anyone knows the registry changes involved in this,please post them so that I can make a .cab, I need it when roaming.
try MWLongLife! It's magic
this program is developed for saving battrey life by controlling 3G/2G network and data usage
you can set each program which need data access by 3G, WiFi, USB, etc.
Also, force to use Wifi rather than gprs if it's available.
Thanks for all of the suggestions. I tried installing nodata again and it worked this time.
for those interested there's also a cab to disable push internet completely (think that was the origin of your problem).
Search the forum on NoPushInternet
336663 said:
try MWLongLife! It's magic
this program is developed for saving battrey life by controlling 3G/2G network and data usage
you can set each program which need data access by 3G, WiFi, USB, etc.
Also, force to use Wifi rather than gprs if it's available.
Click to expand...
Click to collapse
Any link to this? didn't find anything around
sualc said:
Any link to this? didn't find anything around
Click to expand...
Click to collapse
Yes please... I was about to post the same issue. I think the precedence in WM6.5 of using mobile wireless over WiFi is the wrong way around if the WiFi signal is strong. In my house, my WiFi is strong everywhere but 3G comes and goes. It's darn annoying to get the message about "No connectivity" when I know for sure there is a very good WiFi signal.
Cheers, Rob.
PS. Just had it whilst writing this email - "Messages cannot be downloaded to your mobile device..."
It's "WM" not "MW".
http://www.freewarepocketpc.net/ppc-download-wmlonglife.html
That's much better!! thanks fighter7139, gonna try right now!
Every now and then, I notice that my phone connects to the internet (t-mobile internet). I find this strange because I've disabled everything (i can think of) from automatically updating or connecting (weather, email and msMyPhone). I have an unlimited data plan so I'm not particularly worried about the cost; however, it drains my battery fast. Just yesterday, I tapped the top of the screen to see my notifications and I noticed that t-mobile internet had been connected for over 2 hours. I just can’t figure out the cause. I've even done the auto disconnect registry tweak (auto disconnect after 60 seconds) but still no joy. If anyone can help or even suggest a process monitoring application, I’d be very grateful. Thanks in advance.
shaliru said:
Every now and then, I notice that my phone connects to the internet (t-mobile internet). I find this strange because I've disabled everything (i can think of) from automatically updating or connecting (weather, email and msMyPhone). I have an unlimited data plan so I'm not particularly worried about the cost; however, it drains my battery fast. Just yesterday, I tapped the top of the screen to see my notifications and I noticed that t-mobile internet had been connected for over 2 hours. I just can’t figure out the cause. I've even done the auto disconnect registry tweak (auto disconnect after 60 seconds) but still no joy. If anyone can help or even suggest a process monitoring application, I’d be very grateful. Thanks in advance.
Click to expand...
Click to collapse
Did you disable the rest of the services ( HTC location service, stocks, Internet time sync, Facebook, Twitter, YouTube as well ? In my case the Stock were causing unwanted connections before I figured out..
jarbi said:
Stock were causing unwanted connections before I figured out..
Click to expand...
Click to collapse
I think stock was the culprit. I removed it from the home tab from day one and as a result couldnt access it's settings. I put it back on and sure enough it was connecting every 30 mins.
Thanks alot mate. I'll report back in a day or two with the results, though I'm pretty certain it was the stock application.
If you want to be able to turn internet off so it cant connect when you dont want it to then just install the attached cab, run the program then you can enable or disable both settings as appropriate.
I also recommend to use NoData.
Just go to settings->wireless control->connection->advance->select network(choose my work connection if you havent rename it yet) If you would like to use hsdpa/edge/gprs again you will have to change it to as it was before.
mskip said:
If you want to be able to turn internet off so it cant connect when you dont want it to then just install the attached cab, run the program then you can enable or disable both settings as appropriate.
Click to expand...
Click to collapse
Got a brand new HD2 and each time I install NoData, I get an error. What should I do to fix this please?
What's the error message you are getting?
WB
str0g said:
Just go to settings->wireless control->connection->advance->select network(choose my work connection if you havent rename it yet) If you would like to use hsdpa/edge/gprs again you will have to change it to as it was before.
Click to expand...
Click to collapse
the best solution without any installation .
HD2 connection problem
Hi i have encountered the same problem my phone keeps logging into its internet for no reason , i have to disconnect it regularly . now that i have downloaded the nodata.cap how do i use it ? i have installed it onto my phone . how does this file work
feliciang said:
Hi i have encountered the same problem my phone keeps logging into its internet for no reason , i have to disconnect it regularly . now that i have downloaded the nodata.cap how do i use it ? i have installed it onto my phone . how does this file work
Click to expand...
Click to collapse
Just run nodata and then follow the on screen instructions its easy to use.
Mark.
mskip said:
Just run nodata and then follow the on screen instructions its easy to use.
Mark.
Click to expand...
Click to collapse
Even better, you can use Dial-up Enabler/Disabler: works like nodata but interface is a little better and is more user friendly ;-)
thegios said:
Even better, you can use Dial-up Enabler/Disabler: works like nodata but interface is a little better and is more user friendly ;-)
Click to expand...
Click to collapse
Pls note that with nodata, you disable the internet connection but, if the connection is active while disabling it, you still need to end it manually after exiting nodata.
This sounds weird I know...
With dial-up enabler/dsabler it is a lot easier as you will see two connections: one is the internet connection configured on your phone and the other is the current active connection, and you can disable them at the same time.
In addition it does not have annoying confirmation messages on disabling and exiting
shaliru said:
Every now and then, I notice that my phone connects to the internet (t-mobile internet). I find this strange because I've disabled everything (i can think of) from automatically updating or connecting (weather, email and msMyPhone). I have an unlimited data plan so I'm not particularly worried about the cost; however, it drains my battery fast. Just yesterday, I tapped the top of the screen to see my notifications and I noticed that t-mobile internet had been connected for over 2 hours. I just can’t figure out the cause. I've even done the auto disconnect registry tweak (auto disconnect after 60 seconds) but still no joy. If anyone can help or even suggest a process monitoring application, I’d be very grateful. Thanks in advance.
Click to expand...
Click to collapse
how do u do auto disconnection tweak
HD2 connection problem
Connect your HD2 to your computer and transfer the cad file to your mobile.
Find the file on your phone using File Explorer (on the phone).
Double click on it and follow the instructions.
Then go to Start and locate the nodata programme.
Start it and disable what you want.
I disabled the Orange (in my case) internet connection and WAP.
In my case it is crucial that I donet't g automatic access to internet services when I roam because I am on a PAYG tariff.
£20 last me up to three months normally with a different phone (SIC) and since I started using my HD2 my last top up lasted me less than a week.
It's a rip-off!
Once beaten, twice shy...
I won't be caught again!
Hope this helps
Djam2011
Hey all,
I'm on my 3rd htc device and I should have asked this question ages ago!
With things like weather updates and emails is it possible to have them automatically update and download when I'm using WiFi without it trying to open a gprs connection at all other times?
I would also be interested because coming from a symbian phone I really dont like that the phone does not ask me which access point I want to use and that gprs connection is the primary one to use on win mo phone. Nokia is better for me from this point of view, you have to choose which access point to use and there is no way you surf on the net thinking you are on wifi while in reality you are using gprs.
As a former Symbian user, I must agree. 1 point for Symbian, and inexcusably lame for Windows Mobile. Let's hope that this is something that can be worked out in an update to 6.5.x while we wait....and wait.... and wait for WP7.
dan_t said:
With things like weather updates and emails is it possible to have them automatically update and download when I'm using WiFi without it trying to open a gprs connection at all other times?
Click to expand...
Click to collapse
No, there's no way to force wifi. If wifi is connected it will use it, but if it hits the time where it's set to autoupdate, and no wifi is available, it will connect to gprs.
but... if you are in a WiFI area, but without data service, you are SOL, because it won't use the WiFi for the status updates, email, etc.
Pretty dumb, really.
use bsb tweak to disable all mobile data connections or use nodata program... then it wont be able to try to connect while its not on wifi... but u wont be able to use data connections either unless u enable them again
Of course it does use wifi if it's connected and no other connection is present... I'm doing that every day!
When I arrive home I turn on wifi, disconnect data if it was connected, and I can do all I want, it will use wifi and not try to connect data.
is there a way to auto-download once wifi or data connection is detected? my carrier charges me bigtime for every connection access and not by the minute oe data use.. so I just want everything to update automatically in 1 access without manually doing so for each..
kilrah said:
Of course it does use wifi if it's connected and no other connection is present... I'm doing that every day!
When I arrive home I turn on wifi, disconnect data if it was connected, and I can do all I want, it will use wifi and not try to connect data.
Click to expand...
Click to collapse
If disable my data connection, and enable WiFI, and then choose the Weather tab and Update Now... nothing happens. It tries... it fails. Always has on every ROM I've used.
Does it not do this for you, for example?
If I reverse the process.... enable my data connection and disable WiFI.... choose Weather tab, and Update Now.... it works!
Why should such an integral part of the Homescreen UI be utterly and completely dependent on a data connection?
That's something I do not understand.
its working fine over wifi if i turn off data connection for me
Lake292 said:
its working fine over wifi if i turn off data connection for me
Click to expand...
Click to collapse
You follow those steps, and it will update?
Any idea why it never has for me?
I've used
1.48 WWE (Stock)
1.66 WWE (Stock)
Dutty's HG v.08
Dutty's HG v.09
and it has never worked for me one time in this way.
donalgodon said:
If disable my data connection, and enable WiFI, and then choose the Weather tab and Update Now... nothing happens. It tries... it fails. Always has on every ROM I've used.
Does it not do this for you, for example?
Click to expand...
Click to collapse
No, if I do that it works perfectly.
I'd say you have a connectivity problem with your Wifi.. does it work to browse then net in Opera? Wouldn't you use a proxy by any chance?
that's sometimes a problem of synchronization of your wifi router and your device (e.g. dhcp or timeout reconnect of your wifi router)
try this:
switch on router and then wifi on your device.
then start quickgps and try to update.if it fails, then try again quickgps.
if it works on second time then it's because of this synchronization...but update weather should work now by wifi.
kilrah said:
No, if I do that it works perfectly.
I'd say you have a connectivity problem with your Wifi.. does it work to browse then net in Opera? Wouldn't you use a proxy by any chance?
Click to expand...
Click to collapse
Opera and every other connection works. I think it has something to do with my location. It could be that my ISP or my service provider is part of the problem.
Oh one thing I forgot:
In wifi options, advanced, network cards, network cards tab, make sure it's set that your network card connects to the Internet, not Work.
That could be it.