Database Users

XDA ORBIT not able to flash ;(

Hy..
belive me.. i tried nearly everything... and ive been through all of these posts... but i dint find anything helping me out with my problem...
ok, i try to explain in a short way!
I want to upgrade my "old" xda orbit (rom: 3.4.207.2GER, Rom Date: 18.04.07) wit a new rom ( something like "Artemis_Touch_4.02_Full_with_4_sided_cube")
BUT IT DOES NOT WORK!
Yesterday i updated my "new" DIAMOND to a new rom (Bepe 0.94)... so i basicaly know what to do..
But my ORBIT doesnt like to be upgraded..
USPL: doesnt work
RUU: doesnt work
Artemis_Touch_4.02_Full_with_4_sided_cube: doesnt work
downgrade to wm5: doesnt work (dindt find the correct one, i guess...)
now i am out of any more idears... ive got a lot of error messages... such as 260, 270 corrupt files, and many more...
wonder why my orbit is still running after all these unfinished and unsucessfull "updates" but still running with original german O2 WM6 system.
Does anybody can give me a hind what do do, how to update or where to look?
Thanks a lot...
Using Artemis USPL: in the DOS window always the message "program cannot be found".. running aprox up to 50% and stops, than closing the DOS windo
the orbit stays, after a short action showing the Linux guy, with a "white/black" display..
than using the RUU: still connected via usb to my pc.. still black display..green LED on top of the device on..checking the rom.. showing mine correct (3.4.207.2) to 9.99
clicking "next": starting updating... pda display gets threecolored.. than gray.. showing 99% and than 100% after just a few seconds..
Prog stops.. telling me that the file is corrupt (Error 270).. my device reboots and starts with the O2rom
I downloaded the Artemis USPL several times from several locations.. always the same message...
Hard to explain.. but i hope you got my point?!
Btw.. thats just one of the ways i tried.. and just one of my errormessages..
Thanks

Did you tried to remove your SD card before you flash?
Cheers

I Got It I Got It
Thanks "Zecanilis" for your answer.. but that was not my problem.... i took out the sd card as well as the sim card.. as i said.. i tried nearly everything!
But this morning ( i spent the whole night in front of my computer ) i foud the mistake.... an easy one!!
The "Artemis_USPL" file, you can find in all of these threads, is not working with my devices (pc and/or ppc)!?! i dont know why.. but it doesnt.
As i told you i always got messages in the DOS window "program cannot be found", "program cannot be used"... and the intallation skipped all files and stopped always around 50%.
but at 3 in the morning i found a USPL file in the net, with a different name, and it worked with the first try!!
The File is named "arte_uspl".
Just worked fine and smooth 10..20..30....... finisehd.
I am able now to install any rom I like!
Btw... i swithed to Mossis V2.2Ger - a very nice one i think.
But maybe i'll try some more...... because i am able to!
Take care and a lot of fun with your devices!
Bobo

I have the same problem
Where can i find/download the "arte_uspl"?
Thanks for your help.

well...good question
i didnt write down the link.... i dint save the link... sorry!
what i did was to save the file on my computer!
i tried to uplad it to this post... but it didnt work?! sure i am to stupid to do it right!?
so plase help me to post it here, and i will do so!
or gimme a mailadress to send it to!
sorry for beeing so stupid!
greetings

orbit do not boot, do not flash
Hello,
i am searching for a solution of my problem:
i updated my orbit with the new mossis ROM and everything was well, and i used my orbit after this update!
Yesterday i Reset my device and after this the orbit dosen't start again!
After showing the bootsplash the device hangs
So i try to flash the device again:
first i try this:
- start the bootloader manually (voice button + reset)
==> shows: IPL 3.04.0001
SPL 1.11.0000
- starting the ROM Update Utillity
==> the screen of my orbit is grey and shows the update bar (0%)
==> RUU shows the following mesage: ERROR[300]: INVALID UPDATE TOOL
(i used the original german o2 update file)
second try:
update with the SD-card:
- SD-card (512MB) formated with FAT32
- copy the image file xxxx.nbh to the SD-card and rename it to ARTEIMG.nbh
- start the bootloader manually (voice button + reset)
==> screen: Checking SD contens
==> Update SD Image?
- bushing the volume down button
==> screen is red green blue and shows IPL 3.04.0001 and SPL 1.11.0000
Update flash do not start!!!
if i try this sd-card based update with the RUU_uspl_signed.nbh file, the device bootloader start and update the ROM
have anyone an idea???

ohs said:
Hello,
i am searching for a solution of my problem:
i updated my orbit with the new mossis ROM and everything was well, and i used my orbit after this update!
Yesterday i Reset my device and after this the orbit dosen't start again!
After showing the bootsplash the device hangs
So i try to flash the device again:
first i try this:
- start the bootloader manually (voice button + reset)
==> shows: IPL 3.04.0001
SPL 1.11.0000
- starting the ROM Update Utillity
==> the screen of my orbit is grey and shows the update bar (0%)
==> RUU shows the following mesage: ERROR[300]: INVALID UPDATE TOOL
(i used the original german o2 update file)
second try:
update with the SD-card:
- SD-card (512MB) formated with FAT32
- copy the image file xxxx.nbh to the SD-card and rename it to ARTEIMG.nbh
- start the bootloader manually (voice button + reset)
==> screen: Checking SD contens
==> Update SD Image?
- bushing the volume down button
==> screen is red green blue and shows IPL 3.04.0001 and SPL 1.11.0000
Update flash do not start!!!
if i try this sd-card based update with the RUU_uspl_signed.nbh file, the device bootloader start and update the ROM
have anyone an idea???
Click to expand...
Click to collapse
Dear ohs,
There are many ppl, who have this Error 300 issue, but there is no help/solution available anywhere. Maybe the best option is to send your device to HTC, I guess they'll replace your motherboard, if in warranty you'll be lucky!!! unless they find out if you have messed up the device

xda orbit
same problem here,i tried eveything,my xda orbit wont flash it starts to instal the new rom but when it reaches 3% it resets himself ...any sugestion guys ? i tried upls,hard-spl etc arthemis rom everything . help please

Guys, I would suggest, if your device is under warranty, do send it to HTC Service center rather than breaking your head with it. Even I have been through such problems but ultimately I sent it to the service center and expecting my device in a couple of days with a motherboard changed.
If your warranty is not valid anymore then you are in trouble.
Good Luck

Xda Orbit
dose anyone knows the right stepts to flash this Xda Orbit German rom with a wwe rom ? please post it so we can try,i have this xda for 1 year now and iam still using the german rom on it,i what to start to use it but what can i do ? learn german ? somebody help ! i tried to flash it with RUU_Artemis_O2_UK_3.4.206.2_4.1.13.50_03.06.90_Ship all gose well untill 3 % from update the xda resets and gose back to his rom,please help me out ! i`ll mae a donation for this cause ! Thanks

arte_uspl
bob75 i found the rar arhive for your arte_uspl the link is : http://rapidshare.com/files/36943423/arte_uspl.rar

please help!! after ROM upgrade the device stuck completely!

please expert guys help ...
i have new leo with ROM 1.43 today after trying to upgrade to ROM 1.66 I did everything as asked, the installer began , with all the colours on the leo display then it started the percent completion counter , and after 2% it wrote me error something , and the leo restarted but stuck in the white start up menu with the green HTC icon and below the R G D information but the device doesnt proceed further and stuck here !!!
please help !!!!

it write me as i recall
it wrote me if i recall right :
INVALID MODEL ID

did you install HSPL before trying to install the ROM?

no i didnt try to install anything !
no i didnt try to install anything ! , just started the intallation file ROM arabic-english , and did what i asked to do !

if i didnt install hspl what can i do ?
can i take the device to the shop i bought it from and use the warranty ?

well, no...did you get the file from HTC direct or off here? your phone could be vendor locked to your provider so if you can get the original ROM that was on your phone you can flash that back on...
you should really read into things before jumping in at the deep end...

well i have an inlocked device ...
o bought the device in europe , but i am from israel , htc sent me notification about new arabic ROM with link , i tried with my serial to download but couldnt , it wrote me "this upload not compatible with ur device" , i downloaded it from here XDA developers , but it went wrong !! , the problem that the phone stuck in the loader menu , before uploading the sense interface , and i have no connection between the pc and the phone "no active sync" so how can i reinstall the older version or make the phone load again ?!!?!! plz help !

you need the original ROM and a connection to your PC. run activesync as even not working it should connect up...

no there is no connection the device centre says not connected
the phone is not responding and the pc doesnot establish connection with it , i am stuck with loading menu with the R 2.04.50.22~2
G 15.26.50.070
D 1.43.7024
from there nothing moving , if i do soft reset it , it stucks again in the same menu !!!
i didnt install HSPL , and i guess i tried to install not the correct region ROM upgrade , the phone was purshased in lithuania , but htc offerd me middle eastern ROM because i want the arabic - hebrew support !
plz help

You could try installing the Shipped ROM via microsd card method. Just make sure your battery is above 50%. then follow these steps:
1. Using 7Zip, Open your Shipped ROM.exe (You need your exact shipped ROM for this, anything else will give you the error you got)
2. Look for the "RUU_signed.nbh" (without the quotes)
3. Copy RUU_signed.nbh to your microsd card AFTER formatting the microsd as FAT32 (quick format works well enough, using Win 7)
4. Rename 'RUU_signed.nbh" to "LEOIMG.nbh" (again, without the quotes)
5. Take out the HD2 Battery and insert microsd card in slot.
6. Put Battery Back on and hold the "Vol Down" key while pressing the Power key
7. Follow the instructions on the screen... (remember you need at least 50% battery power just to make sure everything goes as planned)
8. Soft Reset after your done and you have a "Fresh" Shipped ROM on your HD2!
Optional:
9. Install HSPL (use the guide that's been stickied in the ROM Dev Section)
10.Flash the ROM of your choice via MicroSD method or activesync (again, please read the Stickied guides in the ROM Dev Section)
Good Luck!

total storage 328 instead of 180 !!!
well i didnt need anything to do, i pressed and hold the up vol. and down volume and pressed the power key , it did a hardreset and my old ROM back to me , though i noticed strange thing !!!
after the hardreset back to my old ROM i checked the SD card & phone storage and i found that i have now total storage 328 instead of 180 !!!
but then i upgraded my ROM this time with legal one from HTC support site , and the total storage got back to 180 again !!!
anybody knows what happened here ?!
p.s thank u guys for the help

[Q] the image file is corrupted , please check your update utility

Hey all so my phone crapped out on me for some reason im not able to boot into my rom anymore and i wanted to uninstall Cotulla HSPL so that i can exchange phone through warranty. I keep getting error message "the image file is corrupted , please check your update utility" after trying to flash.
I am really stuck on this one, please help

Same problem with me, any news yet?
Did you send it back to HTC?

Bump
My friend is having this exact problem. Any solutions

dadogintown said:
Hey all so my phone crapped out on me for some reason im not able to boot into my rom anymore and i wanted to uninstall Cotulla HSPL so that i can exchange phone through warranty. I keep getting error message "the image file is corrupted , please check your update utility" after trying to flash.
I am really stuck on this one, please help
Click to expand...
Click to collapse
If you can go into bootloader screen (the four color screen), you still can uninstall HSPL. First off, turn off your phone. Then, press the volume down button AND the power on button, AT THE SAME TIME, until the four color screen appear (bootloader screen).
Now, connect your device to your PC, and wait until the text "Serial" change to "USB" (you should see it at the white color part)
Now, run HSPL 4 from your PC. Dont forget to turn off Anti Virus, Firewall, Internet Connection, Screen saver and your battery must be at least 50%. And if you are on Vista or win 7, run as an Administrator. If for some reason, Serial doesnt change to USB, you unplug it and try different USB port (try the rear USB port)
Now, you can choose which HSPL you want to remove.
Alternatively, you can erase HSPL using Micro SD Method.
Download your CORRECT STOCK ROM. Extract it, and find the fie named : RUU_signed.nbh . Rename it to : leoimg.nbh. Copy this file to the root of your SD Card. Before copy it, it is advisable to format the sd card using card reader and dont put other files except leoimg.nbh file.
Now go into bootloader screen as mentioned earlier. And follow the instruction screen.
Done.
Goodluck

Did you fix it??
Same problem here.
Give me some advice.
Thanks in advance!

my touch screen is dead HELP

i have htc hd and my touch screen and the button down is dead.
i make hard reset and now says "tap the screen to set up your windows mobile based device" and he didnt do anything is dead, i cant complete the instal i want to re instal the original rom and spl and i cant.when i perform reinstal a message say connect cable on pc and device.
what can i do pleaze help.
R 1.12.25.24
G 52.62.25.34u
D 1.56.00.00
thanks

if you can access bootloader mode, then you can flash back to the stock rom. if you are having connection troubles with your pc, you can also flash back using the sd card method: extract the shipped rom (it's a self extracting exe, with 7zip or winrar, you can right click and extract) and inside you find ruu_signed.nbh, rename that to BLACIMG.nbh and copy it to the sd card. then in bootloader mode, it should show up and give you further instructions.

Ok but the screen is steel dead.any idea.

well, if you finished to flash back your stock rom, radio and spl, and the touch screen still doesn't work, it is apparently one of those cases, where a hardware issue appears at a very strange time, but back to stock, you are ready to get it repaired using the warranty, so it'll probably be free.

[HELP] HTC HD2 cant boot after hard reset or hard reset failed

hi guys..
please help me .. i flash my HTC HD2 with a MAGDLR111 and after it doesnt continue to boot and only stock in boot image. i try to use Hard Reset (holding down the up and down botton and tapping the power button), it response very quick but it says the "restore completed and press up botton to reboot" and so i did but still, it still stock up in boot image forever.. please help me, what should i do..thanks

Possibly a radio problem. Boot pressing volume down button to get into bootloader and flash a radio WITHOUT .51. in its name....
Sent from my Nexus One using XDA App

thanks, already did... and it works.. )))

hey i have that same problem now can you help me get a radio so i can download it or can even help me through the steps to get back my phone to normal plzzz.? thank you

Any new user most definitely has a lot of questions...
Here is a thread you should carefully check - it explains some basic stuff, and it offers links to many other specific threads, incl. Radio ROM.
To return to "normal" ROM, please just check the standard flashing process. You can flash via USB or SD card, whatever ROM you like, stock or custom.

Hey man thanks for all that but i really don't want just any rom, i wanna know if anyone can get me the rom that comes with the phone for windows mobile 6.5, you know with the orange load screen etc, i really dummy in this thing and i should not of even played fast to go try flashing my HTC HD2 with a MAGDLR111.

so i've tried various roms and everyone of them was going great unitl step 2 in the upgrade process, it kept saying error filr open, check update rom utility. where do i go from here?

It is quite difficult to help if there is so little basic information available.
The error you mention can have a simple reason. Usually, the ROM image file name is simply not correct.
To flash via USB:
There are 2 options:
First, you can take an original RUU of your network operator (in case you have a branded phone) or HTC, put the phone into boot loader mode (see below), start the RUU.exe on your PC.
Second, you can extract the original RUU.exe with WinRar or a similar program, take the .nbh file and rename it to leoimg.nbh.
Once you take an image of the ROM, you have to put it into the very same folder where your ROM update software is (LeoCustomRUU, SSPL, whatever). One more time, please check the suffix, it should be .nbh, as in "leoimg.nbh".
Keep in mind: Do start the RUU software as "Admin" - whichever you choose.
Instead of the original ROM, you can flash custom ROMs, too - since your device must have HSPL installed when you used WP7 or Android before.
If you´ve got issues (because of Win 7 on your PC or such), please try to put your device into bootloader mode before connectint it to the PC (turn off the device, push vol. down and power at the same time, the multi color bootscreen should appear, only now connect it to the PC).
To flash via SD card:
Re-format your SD card FAT32. Don´t put anything else on it. Copy the ROM image file with the exact naming as above on the SD card.
To start the flash process, do the same as above, go into bootloader mode, the flash process will start - just follow the on-screen instructions.

i have this same problem only it happened without me flashing anything or something like that. i dont have custom rom or hspl. everything is stock. what should i do?

bump ^^
The message you have entered is too short. Please lengthen your message to at least 10 characters.