Related
Hi Guys,
I wanna share something i found out a while ago.
I am currently holding on to a Motorola HT820 and a BlueAngel and i was kinda playing around with it wondering why i cannot answer phone calls and only can play my MP3's. Here is the solution.
Install the A2DP Profile
Soft Reset
Pair it up to your BT Stereo headset using high quality audio
now, upgrade to build 3900.
Run the restartradio.exe
run the bt upgrade cab file
run the restartradio.exe
Now, pair it up to bluetooth handsfree headset.
This works wonders. It seems to work best on WMP10. I have tried
Mortplayer but, after i answer calls, it stops playing and does not resume.
For WMP10, it resumes fine. I have only tested on BlueAngel and HT820.
I dont have the luxury to get my hands on other devices as yet.
BT upgrade files found here
http://wiki.xda-developers.com/index.php?pagename=BA_Bluetooth_1.0.0.3900_Upgrade
A2DP details found
http://forum.xda-developers.com/viewtopic.php?t=25443
ENJOY !!!!
this currently works best on WMP 10
You can continue listening to music after your call ends with mortplayer,
you have to disconnect the pairing and re-pair again..
XDAII and Motorola HT820
Hey guys,
I'm contemplating buying a Motorola HT820 but I'm concerned that it might not work with my phone - I have an XDAII with WM2005 1.60A installed. anyone know anything?
Thanks and best regards...
Hi
This sounds like what I've been waiting for too.....
I have an XDA II running 2003SE will this work with this combo any ideas?
Good one... will try it later
Has anyone tried with Motorola HS 850???
Has anyone tried with Motorola HS 850???
So far, i have not tried it on XDAII... but i think it should work..
Can anyone confirm if this is possiable with an XDA II as having read through numerious threads on the subject of Bluetooth implementation with various Wicomm configurations, but cannot clearly identify that the A2DP Protocol can be successfully made to work on an XDA II.
I suspect that this can only operate on an XDA IIi or XDA IIs. My requirement is to get a set of Motorola HT820 Bluetooth Stereo Headphones to function with my XDA II via Bluetooth, I am not really worried about the Phone Headset function I would just like to hear Audio via Media Player 10.
Thanks
I have just upgraded to 1.40 ROM (iMate) with Orange EXT ROM on M2000. I have radio 1.13 and the A2DP profile loaded.
Everything was working fine with the old ROM and wmp9, but wmp10 does not respond to the pause, back and forward buttons on the ht820.
Does anyone have this working on ht820? Is there a known work around?
Motorola BT820 Audio Gateway and a player
I've followed the steps above and now have the two new profiles and have managed to pair my Motorola BT820's without any problems.
I've read that this works best with WMP10 but since I don't have this I decided to try Mortplayer.
Silly question : How do I get my XDAIIs to send the audio to the headphones ? Their is an outgoing connection between the two but the sound still comes out of the speaker on the XDAIIs.
If a phone call comes in then this is directed up to the BT820's
Help
Jason
i have done over 50 hard resets.. many tries and it seems to be an intermittend prob.
@woodrjh
In this way a HP Bluetooth Headphones and a Motorola HT820 works with my xda IIi in a2dp mode incl. the Buttons in WMP10.
1. remove the RunBT file from the Autostart dir -> softreset
2. Install the PDA2K_BroadcomCorp_BTUpdate.cab -> softreset
http://h18007.www1.hp.com/support/files/handheldiPAQ/us/download/22475.html
3. Install the HP iPAQ Bluetooth Stereo Headphones Driver Update -> softreset
http://h18007.www1.hp.com/support/files/handheldiPAQ/us/download/22475.html
If the error \windows\btceavif.dll in use come, rename it with Resco File Editor and try again the driver update.
4. Put the the RunBT file back to the Autostart.
cu bülo
does this method enable your bluetooth headset to receive calls?
hi guys, i know all of you want more bt stack rather than ms bt stack. now i found new bluetooth stock for dopod 818(o2 mini).
this is support your o2 mini support stereo bluetooth headset, but make should your bt headset supports. and there is also file transfer stock......and other thing, but stereo bluetooth function need to be improving.
attention: backup you system first.
i learn a lot in this forum, so i want to share this stock for all of you. this stock is i find from somewhere, so i can not fix any bug. anyway just enjoy....
First post and delivering such a revolution? Makes me nervous...
Chatty said:
First post and delivering such a revolution? Makes me nervous...
Click to expand...
Click to collapse
HAHA, I KNOW. BUT YOU CAN TRY, PLEASE FIND ATTACHED PHOTO. THIS DRIVER COME FROM ONE BLUETOOTH HANDSET.
Could this be? Can anyone verify?
Handsfree versus headset
Hi,
I tried and first thing, everything work now as fine as before so a first good point.
Second one problem : my Bluespoon AX is only recognize as a Hands-free and you can only set "Audio redirection" for Headset.
Perhaps some registry work ?
I will continue to investigate
very nice patch indeed..
installed it on my JAM... an it runs OK...
some extinsive testing is required however... I'll let you know later
Thank you kevinyang6688
If this works, you'll be the best
Works here aswell!
it even seems to support bluetooth printing???
---
just downloaded.. will give it a try.
thanks.
Re: O2 MINI NEW BLUETOOTH STOCK.
kevinyang6688, could u pls send me the program for testing only, i am using o2 mini w/ jabra bt330 headset, [email protected]
kevinyang6688 said:
NOW I FOUND NEW BLUETOOTH STOCK FOR DOPOD 818(O2 MINI). ENJOY.
THIS IS SUPPORT YOUR O2 MINI SUPPORT STEREO BLUETOOTH HEADSET
ATTENTION: BACKUP YOU SYSTEM FIRST.
Click to expand...
Click to collapse
Re: O2 MINI NEW BLUETOOTH STOCK.
vicqoo said:
kevinyang6688, could u pls send me the program for testing only, i am using o2 mini w/ jabra bt330 headset, [email protected]
kevinyang6688 said:
NOW I FOUND NEW BLUETOOTH STOCK FOR DOPOD 818(O2 MINI). ENJOY.
THIS IS SUPPORT YOUR O2 MINI SUPPORT STEREO BLUETOOTH HEADSET
ATTENTION: BACKUP YOU SYSTEM FIRST.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
When you're logged on, you can download the file in the first post.
INstalled it but I have no clue how to make it work. Been to the BT settings and everything is there but I have no clue to as it does not detect my my Jabra BT250V.
Will this work in actually turning my Jabra into an audio headset or is it only as phone headset?
Does this help at all with the Nokia car kit echo issue?
Cheers
i'm using O2 mini. After installed... Nothing shown in the "Default headset" drop-down-list-box of the Audio tab
Anyone having similar issue?
To Leewenam
Same thing for me but my Bluespon ax is only detected as a handsfree
Re: To Leewenam
eurorpeen said:
Same thing for me but my Bluespon ax is only detected as a handsfree
Click to expand...
Click to collapse
I guess this audio streaming thing only work for stereo BT? can anyone confirm this?
leeweenam said:
i'm using O2 mini. After installed... Nothing shown in the "Default headset" drop-down-list-box of the Audio tab
Anyone having similar issue?
Click to expand...
Click to collapse
maybe delete the device and bond it again???
Re: O2 MINI NEW BLUETOOTH STOCK.
kevinyang6688 said:
NOW I FOUND NEW BLUETOOTH STOCK FOR DOPOD 818(O2 MINI). ENJOY.
THIS IS SUPPORT YOUR O2 MINI SUPPORT STEREO BLUETOOTH HEADSET
ATTENTION: BACKUP YOU SYSTEM FIRST.
Click to expand...
Click to collapse
Man, you seriously kick a$$! This cab adds A2DP, FTP (successfully sent a series of 3 files to my Magician :shock: :wink: ), Audio Gateway (was able to use my laptop as a BT handsfree ), BT Printing Profile... AWESOME!!! Takes MS BT stack to a whole new level :shock:
But you could already send files with activesync over bluetooth without this stack (do i suppose ftp service is the same thing). Btw can you acces the files located on your computer from your mini now??? (if yes plz tell me how)
As far as I am concerned, it works but doesn t change anything with my bluetooth headset and voice command, i always don t hear any voice command sound in my bt headset, but then I hear the phone conversation directly in the headset...so nothing has changed.
Would have loved so much to hear and launch voice commands directly from the headset's mic.
But thx anyway! that s a really good thing for us anyway =)
It does work with I-tech S35 Stereo BT Headset
As per subject really...
Just tested this on my 1.12.00 T-Mobile Rom and indeed all audio is indeed being re-directed to my headset. Only 'drawback' is that I can't get it to work with PocketMind Pocket Music- the sound it just muted.
But it works perfectly well with Windows Media Player. Slight hitch with WMP is that I am unable to change the volume on the software or indeed the JAM system volume directly- a minor fault for me since I have a volume control my headset Also the music seems to cut out for a second or so every 7-8 seconds.
Music pauses and restarts when an incoming phone call is received.
A massive thanks goes out kevinyang6688. Cheers mate, I have been wanting this for ages! Thanks again!
Hellow,
I bought one Sony DRBT20NX Bluetooth headphones for my X01HT (SoftBank ROM+Asukal patch for translate to English).
I paired both devices (Hands Free and Wireless Stereo services), but now I don't know what I have to do for listen music from my earphones. I switch on bluetoth on both but music is in he loudspeaker of the X0HT.
Also, I don't know how to make work AVRCP.
Thanks
Sesaru
sesaru said:
Hellow,
I bought one Sony DRBT20NX Bluetooth headphones for my X01HT (SoftBank ROM+Asukal patch for translate to English).
I paired both devices (Hands Free and Wireless Stereo services), but now I don't know what I have to do for listen music from my earphones. I switch on bluetoth on both but music is in he loudspeaker of the X0HT.
Also, I don't know how to make work AVRCP.
Thanks
Sesaru
Click to expand...
Click to collapse
You should have a 'Connect' button on your headset... check your manual. I have a diferent headset, but on mine I short-press the power button and an icon appears at the top of the screen.
This topic has been discussed quite a bit. Please use the forum's SEARCH feature. It's quite useful at times. AVRCP, for one, will not work unless you're using a media player that actually supports it, such as MortPlayer.
@sesaru
i use this headphones on X01HT too. just bought few days ago. if you want engilish manual for this pm me. push play pause in your headphones then open media player. this will open A2DP music mode (Wireless Stereo). AVRCP works with media player i dont know any other work one. imusic and gsplayer dosent work. if you push dark blue bar button you will open HFP (hands free). i have bad news too. i cant get good quality of sound. there is some noise when i listen music with it. user manual write it can be about 2.4 ghz wireless device. like microwave oven, wireless LAN and cordless telephone. all thing is what tokyo is haven of them. you must be 10m far from all of them. and this is mean i must to go 10m away tokyo to listen clear music. if you get good quality pls write me. i hope all this will help you.
Just to confirm i have these headphones and they work with all my windows mobile devices.
My hermes is WM5 but they work fine with my Universal with WM6
Someone already said it but yeah pushing the play pause button re-pairs them for a2dp. I think sometimes i push it twice to get it to do it.
Hello,
I fixed when I updated to WM6. But sounds is not good, so I installed Widcomm stack. But I have a new problem.
After install Widcomm stack (I have Windows Mobile VI - BLACK EDITION v1.2 but also happended with WM6 for Hermes LVSW Edition), I can't sync via USB. My computer don't detect the Hermes! Is if like I didn't connect to it.
Any idea?
UPDATE: Fix is here:
http://forum.xda-developers.com/showpost.php?p=1072534&postcount=59
sesaru said:
Hello,
I fixed when I updated to WM6. But sounds is not good, so I installed Widcomm stack. But I have a new problem.
After install Widcomm stack (I have Windows Mobile VI - BLACK EDITION v1.2 but also happended with WM6 for Hermes LVSW Edition), I can't sync via USB. My computer don't detect the Hermes! Is if like I didn't connect to it.
Any idea?
UPDATE: Fix is here:
http://forum.xda-developers.com/showpost.php?p=1072534&postcount=59
Click to expand...
Click to collapse
Oh!! I just realised now I can't switch on the phone module of the comm manager (>_<) So It doesn't work; I give up.
Can you post where exactly is the fix for this? I'm reading a lot, but I can't find it ...
Hello,
What I did is this:
I installed WM6 ROM in my X01HT and WC Stack. After That, I did this:
1. Close BT Manager and turn BT off.
2. Open registry (need Resco Registry plug-in) and make the following changes (no need of soft reset after them):
[HKLM\Software\Widcomm\BTConfig\Applications\0001]
Change ComPortNumber from 8 to 7
[HKLM\Software\Widcomm\BTConfig\Services\0001]
Change ComPortNumber from 9 to 6
Rename [HKLM\Drivers\BuiltIn\Serial8] to [HKLM\Drivers\BuiltIn\Serial6] and change these subkeys acordingly
"FriendlyName"="Bluetooth Serial Port COM6:"
"DeviceArrayIndex"=dword:00000006
"Index"=dword:00000006
When you have changed this, suspend (off) the PDA for a few seconds and turn it on again. Then goto Bluetooth Settings- Services-Serial Port-Advanced and verify that thet ports that Widcomm is using are 6 & 7
But now I can't switch on the phone App. When I open the Comm App, and push the "Phone" button, it didn't start.
Please, somebody let me know what I'm doing bad.
Thanks
Cesar
Hi everybody!
I've used several Nokia Symbian devices before my TouchHD and I've always used them with onboard navigation together with a bluetooth carkit.
Nokia 6600 + Parrot CK3500
Nokia N80 + Parrot CK3500
Nokia N80 + Parrot LS3400GPS
The great thing of this combination was, that every voice command from my navi software was transmitted over my car speakers and the radio was muted!
But with my Bury CC9060 and my TouchHD this great feature doesn't work!
1. Is there a special bluetooth protocoll needed?
2. How can I make sure wether it is the blackstones or the carkits fault, that I don't get voice commands over the car speakers?
3. When I start the MP3 Player in Manila the bluetooth carkit also keeps silent.
Nobody? Here are so many WM experts. Someone must have an answer!
Hello
What version of software are you running in the cc9060?
The latest is v1.74 and this works well with the Touch HD, all contacts are there only battery power level is not working on mine.
The problem you have might be that the car kit connects by default on A2DP and trys to output sat-nav and music via this, if you do not have the cc9060 connected to a aux input you will not hear the audio.
To get around this you can always disconnect the A2DP in the options of the phone ,Comm manager>Settings>Bluetooth>cc9060> then untick wireless stereo
then audio will come out of phones loudspeaker
I have my Touch HD and cc9060 connected to my Focus aux-in and use it as music player while running TomTom, the phone then overlays sat-nav directions over playing music they work well together, the touch screen music controls work well with manillla player and allow control of music without interupting tomtom
If you need to update cc9060 you can get new software from bury's website at
http://www.bury.com/en/hands-free-car-kits/system-bt-bluetooth-systems/cc-9060/software.html
hope this helps
CC9060 Software is already the latest: 1.74
I found these checked bluetooth options:
Wireless Stereo
Hands Free
I'll give that a try and uncheck Wireless Stereo!
Do you already know, that bury will release an actice cradle for the Touch HD in June/July 2009! Then I am able to load the battery while driving.
Update:
With unchecking bluetooth stereo, the navi software uses the phone speakers, whereas it is connected to the CC9060.
But there are still two disadvantages:
- Radio ist not muted when a call comes in.
- Not as loud as the car speakers
I've written to bury and they've answered me the same:
The device must be connected to AUX to hear something over the car speakers.
One question is still unanswered:
What is the reason, that Nokia devices where able to transmit the navigation commnands over the car speakers?
Bury mentioned, that the handy must support this!
Hi Pal
I have the parrot Ck3100 and it would play the sat-nav commands via the stereo speakers with my N95 but won't with the Blackstone. So it must be WM or the Touch HD that is not sending commands to the carkit. I also noticed that with my N95 when I got a text the sms alert was played through the car speakers the touch Hd does not do this.
Hope that helps and if you find a solution I would love to know.
Sully
Damn! Is it the handy operating system or the handy-brand?
As you mentioned already your symbian device is doing it right. But the WM6.1 device fails!
Maybe I should test it with the new omnia HD (also symbian OS) if it works!
Please report back if you find ourt anything more, I am sure it must be possible maybe with a reg tweak.
Sully
At the moment I don't see any possibilities to get that to work.
The manufacturer of the my new bluetooth car kit (bury) said, that it is very seldom, that a mobile phone sends navigation commands to the carkit. They are also not testing this feature, when they are adding a mobile phone to their supported phones list.
Should't a carkit in handsfree mode work as a headset?
Even Parrot was unable to say which device is generally sending every sound to the their carkit. But they said, that their carkit is reacting on EVERY activity from the mobile phone, when it is in handsfree mode.
We need more feedback from carkit / navigations users to finde the weak point!
Hi Pal
Just been reading about vjvolubilis and btmusic and some diamond users have managed to make it work. I have just installed it and will try it out on the way home tonight.
Sully
hungabunga said:
Hi Pal
vjvolubilis and btmusic
Click to expand...
Click to collapse
So those are the right apps? Are they free and maybe also available here?
I could test them, too.
they are free to use, i had some success with vjvoubilis. it worked but kept muting the stereo even though there were no commands from tomtom. for btmusic you need .net
sully
btmusic wants to have 2.0. But in my Rom .net 3.5 is already included. Does it work with you?
EDIT: After installing v2.0 via activesync btmusic starts but then a message "license expired 01/09/2008" appears.
I had to download .net 2 to make it work, the phone still works fine after installing version 2 and I am running duttys 2.7rom. Link for .net2 found on this page under requirments http://maxmobilesoft.com/index.php/software/btmusic
Sully
I thought in v3.5 v2 is icluded.
Get it to work now, too. But:
How did you solve the license expired message? Setting back the system language is starting the programm but not a solution for always.
use the link I provided above, you have to register to download but that version doesn't have licence problem.
Sully
Thanks a lot, but I've registered now, too. The app works.
But I am to tired to walk down to the car and test it. Maybe in a few hours after sleeping for a while.
go to sleep man and check it in the morning, there is no rush.
Sully
i cant get my hd to work with my intergrated bluetooth either.
i have tried software call JETware, that many people talk about... still my phone will not ask for the pairing passcode(password or key).
Any help would be great.
thanks
btmusic didn't solve my problem.
Igo8 did not talk to me via bluetooth and the manila music player, too.
I've spent days searching and trying all sorts of tweaks but I can't get anything to work. Can anyone PLEASE help!
I use Tomtom 7 and I've always sent the voice instructions to the bluetooth speaker in my bike helmet (just a handsfree paired item). I've previously done this on HTC devices with BTAudio and a one line registry tweak. Can anyone offer a solution to send all the audio to a bluetooth handsfree on the HD2?
I really hope someone can help, I've got the HD2 setup just right except for this last remaining item.
Many thanks,
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
xardus said:
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
Click to expand...
Click to collapse
Yes I've tried the "manage system audio in handsfree device" option. I can get some background noise on the headsets (I'm trying with a Scala Rider and Motorola 700 & 850) but I never manage to get any sound.
Can anyone please offer a solution? It's a big disappointment for me if this isn't possible. Any suggestions welcome, many thanks.
My Observations
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Fadetogrey said:
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Click to expand...
Click to collapse
It gives me some hope that you've got it to work with one bluetooth device. Can you please let me know exactly what you did to get the $20 bluetooth earpiece to work?
Thanks,
yeah that was my idea but without a stereo bt device i cant try to myself...i ordered to vodafone one with some of my tons of points...3 weeks and no answer!
I had the same issue and on my old phone, the HTC Touch HD, I used the following program to my satisfaction:
BTAudio
On my HTC HD2 however this doesn't seem to work anymore. :-(
it does the same thing of the inbuild bt option on hd2 its just a "quick link" to place on the bar
anyone of u have any problem with bt device volume? before i have an Artemis and 3 different device i used the device volume was every time the one i choose...now every time a new call starts phone volume its right but device volume jump to minimum level and every time i have to press + button like as i'm playing videopoker to dont miss fist seconds of a conversation
Works fine with Jabra 3030, all audio over it, music, system sounds and calls.
Maybe it's only working for bluetooth devices that are setup as stereo. Can anyone please offer a solution here?
I've installed a 6.5 rom (dutty v7 - thank you) on my HD and after a sprite restore (level 2) bluetooth audio divert works fine. Although I notived that the bluetooth options remained the old settings (possibly due to my backup restore) and the divert was done using the BTAudio. Sorry to keep asking but if anyone can shed light on this.
Is it possible to tweak the HD2 so that audio can be sent to any bluetooth headset/handsfree or is there some hardware limitation that stops this from being done?
I've tried every app and tweak that I can think of! Please can anyone help, even iof it's to let me know why this can't be done.
Thanks,
its what we all are trying to do......now i think its only a bt device problem...if it support bt2.1 and a2dp with edr seems to work all good....
i solved in car with headphone in the box...but bluetooth should be much and much better without any cable that always have to remove nodes (its the right word? sorry if not hehe)
I'm connecting to my HD2 using Jabra Stone, an A2DP headset. When I selected the stereo headset profile on the HD2, it redirected all system sounds to the headset: reminders, SMS alert, soundtrack for videos, audio player....except phone ring. I used BT Audio over a non-A2DP headset before with Diamond2, but the ausio is very poor, and the connection drops very often. Since I changed to A2DP headsets, the Diamond2 and HD2 supports it out of the box - no hack needed.
So look for A2DP headsets if you want to redirect audio.
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
I have an LG HBM-220 bluetooth and cannot put audio to in, only phone calls!
How can i manage to do it?
I blame it on the stupid Widcomm Bluetooth stack... If the HD2 used the better MS stack, BT would play nice with with more of our periphirals and apps
I can't use MSVC properly with BT either....
the solution is to go to the bluetooth settings, select your device and connect the stereo audio connection.
Way back, Microsoft decreed that ONLY the phone app could use a mono BlueTooth headset, although any audio could be redirected to a stereo A2DP headset.
In order to get around this you need to fudge the sytem with something like BTAudio or TekSoft's BlueAudio.
The latter worked on my XDA Orbits (1 and 2) but does not work on my Touch HD with Dutty's R6 ROM (WM 6.5) possibly because BlueAudio requires the Microsoft BlueTooth stack and I suspect Dutty's ROM has the Widcomm stack. But I could be wrong about that.
BTAudio sort of works on my Touch HD, but outgoing audio is speeded up like I've been breathing Helium.
So no current solution to yet another idiotic gotcha from Microsoft.
Noony said:
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
Click to expand...
Click to collapse
Hmmm. When I conect via gprs to youtube aps I can hear the voice in my mono headset (jabra 2020) but via wifi and computer as modem voice is only in phone speaker. So maybe we should look gprs or youtube aps reg tweek.
Guys
i have a nokia HB-100 headset and i'm experiencing all kinds of strange behavours
sometimes system sounds including music ...etc get directed to the headset and some other time it just directs calls no matter how hard i try thru soft resets or unchecking then checking the "play system sounds ..." option!
very strange, any insights about this? is there a tweak to go with or is it a known WM defect?