I want to re-install the original bootloader (SPL) because I may have to return my TC for repairs. I have read the (beginner's) guide on how to install the original SPL but that method requires ActiveSync.
For some reason Activesync (on my 2 winxp pc's) doesn't recognize my TC anymore since about 2 weeks (Unknown Device) so that's a no go.
Can anyone recommend another way to restore the original SPL? I hoped that it could be done using the MicroSD method but elsewhere I've read that this doesn't work for the SPL part.
Try another USB cable (any MiniUSB, from your digi cam, mp3 player, ...) since yours might be invisibly broken inside. If it still doesnt work, in Settings > Connections disable Advanced network functionality to be found behind the USB to PC icon and try connecting your device again.
schaggo said:
Try another USB cable (any MiniUSB, from your digi cam, mp3 player, ...) since yours might be invisibly broken inside. If it still doesnt work, in Settings > Connections disable Advanced network functionality to be found behind the USB to PC icon and try connecting your device again.
Click to expand...
Click to collapse
Hi Schaggo, thanks for replying. I have tried 3 or 4 different cables, some of which I'm sure worked fine before. On all cables, I can see that my TC does charge, but for some reason there is no usb-data connection at all. I've also tried disabling Advanced network functionality on my TC, re-installing Activesync on my laptop and doing a win-xp system restore to a time where all worked fine. Short of completely re-installing Windows XP, I think I've tried all there is to try.
I am getting very suspicious of the hardware connection inside my TC. Could it be partly broken so that it charges only? The main reason I'm considering turning my TC in for repair, is that on soft resets, I regularly get the warning 'Main battery is very low' after which my TC shuts down. Even though my battery is charged for >90%. Maybe this relates to my Activesync problems.
Interesting... hmm... to check the hardware you could try to connect your TC to a different computer (AS doesnt have to be installed) and if it never was connected before, Windows should bring up a "Search for drivers" dialogue which shouldnt happen if the hardware is broken.
Alternatively you could remove the TC of your device manager (it still is there, just hidden):
Unplug your Touch Cruise
Open command shell (start - run - "cmd")
Type set devmgr_show_nonpresent_devices=1 and hit enter
Go to your device manager (right click computer - manage - device manager)
In device manager in the View menu select Show hidden devices
Delete everything grayed out which has to do with either ActiveSync or the Touch Cruise or Polaris, most likely to be found under USB stuff and/or portable devices. I'm not on XP, I'm on Vista...
Having that done might help your case. Reboot the system and reconnect the TC. A general hint: System recovery doesnt work on XP and it partially works on Vista. I explicitely do not recommend to use it, it usually does more damage in the background than it helps in the foreground.
Hi, I tried all your hints but still no luck. In Device Manager I can't find anything that's related to HTC/Polaris/Activesync. Only 'USB Root Hub', 'Standard Universal PCI to USB Host Controller' and 'Unknown Device' (which pops up after attaching my TC). I tried deleting all of those but my TC is always (not) recognized as Unknown Device.
Installing WinXP SP3 did not help, nor did running a clean WinXP Image in VMware.
could be your computers USB port as well. So the VM doesnt do anything if the host which it runs on is broken
But could be a seriously defective unit. I heard of reports where people got their devices replaced without even bothering putting anything original back onto the device. They sent in some HardSPLed and custom ROMed devices and everything went fine for them. Maybe you'll be lucky. I guess just try...
Thanks for your continued support on this
I gave it one more shot by re-installing the original WWE rom from the MicroSD card twice in a row with a hard reset in between. Also deleted all usb stuff again from winxp Device Manager and uninstalled my firewall (Comodo).
After a reboot of my PC and connecting my TC to the USB cable, I at least got the 'Found New Hardware Wizard' to tell me that a 'USB Device' (meaning my TC) was found and how I would like to install the software. I tried automatically and manually but it/I could not find suitable drivers on my PC. I think that the fact that my TC was found as a 'USB Device' and not something like 'HTC P3650' is a clue that something's wrong.
I don't think my PC/laptop is to blame. I'll probably either throw my TC out of a window or hand it in for repairs. Fingers crossed.
The drivers come with ActiveSync, if you uninstalled AS it wont find the drivers. Most likely... If you uninstalled it, reinstall and try again.
Secondly, if you turned advanced network functionality off, the device doesnt get recognized by its name but as USB Device or so. Dont remember, tested it once... But its not Polaris or HTC or anything like that, it's a general descriptor. I hope you can get it to work, eventually...!
Hi, just to let you know: I turned my TC in for repairs because of the soft reset problem and when I got it back (supposedly with a new mainboard) ActiveSync worked like a charm again on the first try. So there must have been something wrong with the hardware inside my TC.
Unfortunately my repaired device was returned to me with a new hardware issue so it's on its way back to the repairboys in Belgium again. Boohooo.
Related
Dear All,
Please help, my new O2 EXEC is sitting here almost totally useless without ActiveSync.
I did a very stupid thing:
I plugged in the Exec via the USB cable before installing ActiveSync 4.0.
What used to happen (back inthe day 2001 etc) would be that windows would install its own driver for the portable device and then when you subsequently installed ActiveSync its drivers would not go in and hence ActiveSync would not recognise your device.
What is happening now seems like the same sort of issue in that now having installed ActveSync it is just sitting there saying no connection.
For ActiveSync 3.6 and below this is a documented problem and here is the fix
http://support.microsoft.com/kb/264693/en-us
BUT for me this does not work (well because there is no yellow unknown device in Device managers other devices).
In AUDIBLE terms
a) I get a du-duh sound when I plug in EXEC (like if you plugged in a USB key for example)
b) It shows up in the Device Manager-> Network Adapters as "Windows Mobile-based Device"
c) ActiveSync 4.0 or 4.1 does NOT give me the dulde-de-dah sound
d) ActiveSync shows no connections
Anybody any bright ideas? Surely I am not the only twonk to have inadvertently plugged in the EXEC first
Answers greatly appreciated.
BASICALLY HELP
PS: Have also looked at ActiveSync trouble shooter 2001, the ActiveSync 4.0 troubleshooting article from Msoft, tried switching off firewall, no result. Have tried deleting the Mobile-based Device, uninstalling AS 4.0, rebooting, reinstalling AS 4.0 or 4.1 then plugging EXEC,no good.
PPS: I convinced a friend to let me install AS 4.1 on his computer and then plugged in the EXEC and all was fine, so the EXEC itself is sound.
Maybe this will help:
http://www.microsoft.com/windowsmobile/help/activesync/default.mspx
Sorry, didn't read your message good.
Just see now you already did looked at the link....
But another idea: if your device works on your friend PC, then why not
do a clean install for the OS on your own PC?
Maybe this will solve your problem.
Dodger,
Thanks for the thoughts. Well actually thinking about a reinstall of my computer due a moments lapse of concentration is a difficult undertaking. With the backup of the on computer databases as well as over 100 applications installed, I think this would take me several person days.
Currently my thoughts are to clone the partition and then do a windows "over install" onthe clone, but logically that will not work because <of course> the whole point of an over install is that the registry and all applications are preserved.
I spent over 3 solid hours of googling, installing, uninstalling drivers yesterday trying to fix and can't believe I am the only one who has had this problem!
Perhaps somebody with a working ActiveSync can elaborate how does the EXEC show up in device manager (when its plugged in and synced), and also what device driver XP and /or Windows 2003 server would be using.
Thanks mb.
I was facing similar issue. Solution? Yes, uninstall my firewall, connect and sync with my JasjAr and then install the Firewall with Jasjar already connected !
This may help:
Open network connections on ur PC so u can see all connections.
Make sure AS (PC side) is enabled for USB
turn off JJ and plug it in to USB
Turn on JJ whilst watching the window of netwrok connections on ur PC
A new connection icon should pop up, then MAYBE dissapear again
Right click this icon, before it dissapears, and check it's enabled, then select properties
Now check the following items:
- does top box say "windows mobile based device"
- click "configure"
- under configure, is there a button somewhere (mine's working so I can't recall exactly where) that says something like "enable mobile device". If so, then you need to click this.
If this all fails, then repeat but with another USB port. The reason for this seeming waste of time is that you will get a DIFFERENT "Local area connection nn" icon, which may work for you.
I cant believe there hasnt been one mention of rebooting your PC - Which I can assume you already have done?
What OS are you running on your PC?
I have only just got my MDA PRO but this may help! as I did the same thing and for a while XP Pro wouldnt recognise the device.
Uninstall ActiveSync
Reboot PC
Install Activesync V4.0
Plug in USB Device
If there is still a problem connecting you shoudl see a USB device not recognised in your deviuce manager.
It almost seems like there is a time you have to wait before XP will respond normally to you unplugging and replugging in the USB.
Failing this you may have to uninstall Activesync and tehn remove all activesync registry keys it may have left behind! Then reboot and start again!
Just having tisproblem now, this is pïss poor of MS to still be foisting off onto us this Activesync package in such a terible state.
I've just had activesync stop working on me. It would connect but then refuse to sync anything even though it previously worked fine. I think it got upset after I booted up the PC with the Exec connected.
Anyway an uninstall and reinstall of Activesync on the PC cured the problem. Not the most robust software though.
Moandal said:
I've just had activesync stop working on me. It would connect but then refuse to sync anything even though it previously worked fine. I think it got upset after I booted up the PC with the Exec connected.
Anyway an uninstall and reinstall of Activesync on the PC cured the problem. Not the most robust software though.
Click to expand...
Click to collapse
What works for me is to turn off the handheld, and connect the cable after that. Then turn on the device if needed. Works mot of the time then.... no excuse for MS though....
Hi there,
I'm using a TYTN (from SFR v1605).
It used to work well when I was on XP but since I've upgraded to Vista, in most cases the USB connection does not work.
As seen on some threads here, I have tried to tick / untick the "advanced network" option in the USB to PC settings panel: sometimes it works (rarely) but since few days I'm not able to synch through USB at all.
I don't know what to do.
I'm able to charge the TYTN, but I cannot see the panel displaying "USB connection..." on the TYTN.
Also the TYTN is recognized from Vista (I see it in the USB ports) and I cannot see any specific error message in Vista, just the mobile device center says the TYTN is not connected.
Any help would be appreciated.
Best Regards,
erixsamson said:
Hi there,
I'm using a TYTN (from SFR v1605).
It used to work well when I was on XP but since I've upgraded to Vista, in most cases the USB connection does not work.
As seen on some threads here, I have tried to tick / untick the "advanced network" option in the USB to PC settings panel: sometimes it works (rarely) but since few days I'm not able to synch through USB at all.
I don't know what to do.
I'm able to charge the TYTN, but I cannot see the panel displaying "USB connection..." on the TYTN.
Also the TYTN is recognized from Vista (I see it in the USB ports) and I cannot see any specific error message in Vista, just the mobile device center says the TYTN is not connected.
Any help would be appreciated.
Best Regards,
Click to expand...
Click to collapse
I had the same problem a couple of times. After a considerable amount of searching this forum, and other sites, I stumbled across a routine which fixed it for me.
With your TyTN connected by USB, on your PC/Notebook open up System Properties, Device Manager. You should find an entry, Portable Devices, showing the TyTn, It will probably have a yellow triangle with an asterix, showing that there is a problem. Right click on that and select Uninstall.
Then disconnect your TyTN and reconnect it. The PC/Notebook should then rebuild the USB driver, and everything should then sync.
HTC USB Sync with Vista
Thank you for your kind help.
I can see the HTC in the device manager, under mobile devices, but with no yellow triangle.
Anyway I've uninstalled it, and then disconnected and reconnected the TYTN.
It reinstalled the driver, but I still have no UBS Sync recognized on the TYTN.
Best Regards, Eric.
erixsamson said:
Thank you for your kind help.
I can see the HTC in the device manager, under mobile devices, but with no yellow triangle.
Anyway I've uninstalled it, and then disconnected and reconnected the TYTN.
It reinstalled the driver, but I still have no UBS Sync recognized on the TYTN.
Best Regards, Eric.
Click to expand...
Click to collapse
Two final suggestions from me.....
Firstly, ensure that you have the updated version of WMDC on your PC/Laptop. Mine is Version 6.1.6965.
Secondly, try deleting the existing partnership(s) on your TyTN. To do this, go to Start, Programs, ActiveSync. This will show you which partnerships are active. To delete them, go to Menu, Options, Delete.
When you reconnect your TyTN, it should set up a fresh partnership.
If this doesn't work, perhaps someone else out there could offer more advice.
Still not working
Hello Syd,
Thanks agaon for your kind help.
I've been travelling a lot these last weeks, sorry for the late answer.
I'm using the same version of WMDC as you.
I've also reset the partnerships.
It still does not work. Each time I reboot my phone it will loose the ability to establish the USB connexion with the PC. Fews days (sometimes weeks) after the connexion will work and I don't know why.
I'm sure this is linked with the phone, not the PC.
I've read somewhere in this forum it could be linked with the automatic time zone adjustment. I have the feeling it is linked with that, as my problems initially started while I was travelling in foreign countries.
I've seen somewhere that I should disable the automatic time zonbe adjustement, but I cannot find this option.
ALso, since I've created user defined alarm clocks, I have a very long list of alarms when I reboot the phone. I think some "events" are locking the phone, I just don't know how to fix it.
Maybe I should perform a full reboot, but I dislike doing it as I've installed many applications on my phone.
Thanks again for your help.
Best Regards, Erix.
Have you tried going into the usb to pc setting on the device (setting - system) and unticking advanced networking support?
advanced network
Yes, for sure I've tried this option.
Sometimes when I enable / disable this several times, it will eventually activate the USB connexion.
It used to be a workaround in the past, but it does work any longer.
A little bit like if there is a growing list of "events" which prevent the USB connexion from being activated. I really would like to understand what happens.
Are you using SP1 on Vista? If not, there is a USB update that you need to apply that fixes communication issues with USB devices and the host controller. I would HIGHLY recommend updating to SP1 ASAP. It makes Vista worth using.
If you are running SP1, I don't have any more thoughts other than replace the mini-USB cable. I actually had a bad one recently so it can happen.
Vista SP1 and USB
winnebago said:
Are you using SP1 on Vista? If not, there is a USB update that you need to apply that fixes communication issues with USB devices and the host controller. I would HIGHLY recommend updating to SP1 ASAP. It makes Vista worth using.
Click to expand...
Click to collapse
No I don't use SP1. I let the system installing updates and fixes automatically, so I don't know whether that USB patch you mentioned has been installed or not. I'll have a look at it... I'll also install the SP1 ASAP.
Thanks for the tip.
winnebago said:
If you are running SP1, I don't have any more thoughts other than replace the mini-USB cable. I actually had a bad one recently so it can happen.
Click to expand...
Click to collapse
It is not the cable, I've bought a second one to check, and it behaves the same... And sometimes it works.
I have the following problem with my HTC Touch HD. Since yesterday after i transfered 2 video files and a few pictures, when i connect it through USB, the computer doesn''t detect HTC anymore (nor syncing nor file transfer). Even the Bluetooth syncing does not work. I performed several soft and hard resets, and it seems it;s getting worse after every reset.
I bought the phone 2 weeks ago, after i sold my Apple iPhone 3G 8GB. As we speak, i kind of regret i did that...any advise for me ?
I forgot to mention: when i plug the uSB cable, the device goes recharging.
Have you tried booting your pc ?
Also try unchecking Settings/connections/Usb to Pc/ "enable faster data synchronization"
r
Andrew
What cable do you use? I had similar problems with non original (asus) usb cable.
greetings everybody..
1) i tried what you said several times, no result.
2) i get same results with the original and the other cables..
3) i noticed one thing . . . if i connect the device to a computer that i never conected before the device, it launches active sync....and Active Sync just wont interact with my device.
Did you try reinstalling ActiveSync on your PC?
yes i tried....same result. Do you think a change of ROM would solve that ?
Now, even a syncronisation using bluetooth is almost impossible, since i cant pair the computer and the device. Damn, it's like a virus or something.
stupid thought:
Do you think a change of ROM would solve that ?
Click to expand...
Click to collapse
Impossible since i cannot connect using USB. Sorry !
I too had problems with my PC not recognizing the HD. Found out that it was a problem with my firewall and anti-virus. I adjusted anti-virus settings to allow active sync to pass through and have had no problems after that.
HTC also recommends going to Start --> Settings --> Connection tab --> USB to PC and deselect the checkbox for "Enable faster data sync"
For device recharging when plugged in to USB : go to Start --> Settings --> System tab --> Power. here below the battery charge indicator, there is a checkbox. Read the message and check/uncheck as desired.
Hope this helps !!
i thought one potential source for my problem would be the antivirus, but i disabled firewall (eset at work and symantec end point protection at home) and no result what so ever.
I cand figure a way to sync the device even with the bluetooth since i cannot pair the device and the computer.
I am starting to regret i bought HTC...
Try click the Activesync icon on HD Program, there is a "Option" on the menu, click and see if you could delete all the old connect. If yes, re-establish the connection again to see.....good luck
Option menu item is disabled (i performed several hard resets)...(
Another thing i noticed. I unchecked the box (when connected to USB charge), so now when i plug the usb cable, it wont charge. But, if the device is in stand by (black screen), and i plug the usb cable, it wakes the device up. So, in my mind, i think it is something wrong with the OS, it still "feels" the USB cable, but cannot (for an unknown reason) take the necesary action.
For 4 hrs i try to sync the device with the computer using bluetooth, and i cannot manage to do so.
Is there any way to reinstall ActiveSync on my HTC device ?
daemonus said:
Option menu item is disabled. For 4 hrs i try to sync the device with the computer using bluetooth, and i cannot manage to do so. Is there any way to reinstall ActiveSync on my HTC device ?
Click to expand...
Click to collapse
My sync problem with HD and my PC with Vista, was solved as follows:
- Uninstall Windows Mobile Device Center
- Reboot and reinstall WMDC
Ton V
NLBeev said:
My sync problem with HD and my PC with Vista, was solved as follows:
- Uninstall Windows Mobile Device Center
- Reboot and reinstall WMDC
Ton V
Click to expand...
Click to collapse
Tonight i will try to install at home Windows VIsta (at work and at home right now i have XP). I cannot use my phone - no phone number in agenda and it's driving me mad. The phone rings and there are quite a few persons i dont want to talk with.. HEEEEEELP
nobody there to help me ?
If you did a hard reset, and you can connect in drive mode, but can not sync, then I am 99.9% sure that there is nothing wrong with your phone, but that your computer is messed up.
Uninstall all your antiviruses, firewalls, and other bloatware, and see if it works then.
Just a possible solution, but did you try plugging in your phone into other USB slots on your PC? Are you perhaps trying to sync it through an USB extension cord, or maybe USB hub? I had problems with my PC recognizing the THD if I tried syncing that way. Best results were plugging it directly into the back side of the casing.
The reason I'm asking this is that if you have too many USB devices plugged in, it's possible that the USB voltage drops too low and devices won't connect to the computer.
I tried on 5 different computers, all available USB ports.
On a new computer, sometimes on the device screen it shows up Active Sync but that is all, no sync occurs. If i try again on that computer, i get the same result as i get using the computer at home or work.
The device cannot conect as a Disk Drive
Is there a way to reinstall Active Sync on HTC ? My guess is that this software is all gone with the wind (even i performed a hard reset). The big question is what the hell happened ? Could be a ROM fault ? I mention i never tried to change ROM, the only software i installed was S2U2 and Core Player.
If by monday it wont work, then i'll send it into service (i have warranty). But i hate service
all out of ideas...
Any ideas ?
Which items are checked when you go to Settings/connections/Usb to Pc/ on youre phone?
Have you tried to use another memory card (because youre problems started with copying)?
I recently had to replace my notebook, new one came with Vista, also coincided with purchase of Touch Pro 2.
my current kaiser (WM 6.0) works fine, connect usb, vista fires up mobile device center.
connect pro 2 (WM6.1) via usb , nothing, device center does not start up.
run active sync on the pro 2, Sync button is grayed out. I have set 'sync all pc's....' to usb in the connections screen.
have checked other threads but so far come up blank.
can anyone point me in the right direction to possible fixing this, I need to reload some software not to mention I would like to and would like to check out some of the roms on this sight.
chrisnz1947 said:
I recently had to replace my notebook, new one came with Vista, also coincided with purchase of Touch Pro 2.
my current kaiser (WM 6.0) works fine, connect usb, vista fires up mobile device center.
connect pro 2 (WM6.1) via usb , nothing, device center does not start up.
run active sync on the pro 2, Sync button is grayed out. I have set 'sync all pc's....' to usb in the connections screen.
have checked other threads but so far come up blank.
can anyone point me in the right direction to possible fixing this, I need to reload some software not to mention I would like to and would like to check out some of the roms on this sight.
Click to expand...
Click to collapse
Have you tried starting mobile device center manually? Also had some troubles now and then, reboot of my pc and softreset of my phone usually fixed my problems. Else most responses will probably include the usual: remove all partnerships and/or reinstall mobile device center.
Btw, does your device show up in your hardware list or under my computer when connect it to your USB port?
mobile devioce center (Vista) and htc pro 2
have tried pc reboots and htc reset, no go.
If i connect my kaiser it appears as a device under my computer and device center picks it up.
connect the pro 2, does not appear as a device under my computer and if device center running does not attempt a connect, if device center not running vista does not start it
also no partnerships currently set up.
did have a kaiser one , deleted this when the pro 2 did not connect
chrisnz1947 said:
have tried pc reboots and htc reset, no go.
If i connect my kaiser it appears as a device under my computer and device center picks it up.
connect the pro 2, does not appear as a device under my computer and if device center running does not attempt a connect, if device center not running vista does not start it
Click to expand...
Click to collapse
Well as far as I know Windows should at least show your device under My Computer, even without a partnership or without even having Mobile Device Center installed.
So my best guess is there is some conflict which prevents your TP2 from even connecting to your notebook. Have you tried connecting it to a desktop PC? Or are you trying to connect it through an USB hub or something? If so it is possible the hub isnt delivering enough power.
I had the same issue and ending up hard resetting my phone before I figure what I did wrong. Go to settings on TF3D then all settings. Go to connections, and under usb to pc, select active sync. If it says disk drive it will not work in active sync. Also if the enable faster data sync is checked...uncheck it. Sometimes this causes an issue.
Go to settings and choose USB->PC Settings. Here you can disable "fast synch". Now it should work, if not, activate "fast synch" ^^
YOu might want to re-instal active sync ( device center ), I had a simulair problem, and it was solved
gz reb3lzrr
rodium and vista sync
firstly thanks for the many replies.
still no go
reinstall device center
rebooted pc, reset phone.
tried with a xp laptop with active sync, still no go.
neither pc recognises the rodium phone.
when I attach my kaiser each pc 'chimes' , ie recognises the attachment and activesync or device center start up and connect
rodium nothing.
tried each of the usb ports and couple of cables, all work for kaiser non work for rodium.
Hi. I have had the same problems. Disable fast sync like my man neonoxDE said. That will help you. Altough it helped me. With Win7 you can sync with that option enabled.
(QUOTE: Go to settings and choose USB->PC Settings. Here you can disable "fast synch". Now it should work, if not, activate "fast synch" ^^)
thanks tried that as well, still no joy.
Its has if the phone is not telling the op system that its there. Ie the interupt to the op system that happens when a usb device is attached is not happening, or being ignored.
i had the same problem. i had to uncheck the box advanced network funtions. that wen you go in to settings and usb to phone.
that was the problem with my phone sync.
sorry for bad english.
Ugh
Just went through this all tonight. Also coming from a Kaiser (AT&T Tilt).
To get it functional, I had to:
1.) Add Remove Programs
2.) Remove Windows Mobile Device Center
3.) Remove Windows Mobile Device Center Driver Update (if you installed it).
4.) Disconnect USB from phone.
5.) Reboot
6.) Reinstall Windows Mobile Device Center 6.1 from CD (Sprint here).
7.) Install Windows Mobile Device Center Drvupdate. (WMDC dir on Sprint CD, called drvsomething or other, depending on if you're 64 bit or x86 on your PC).
8.) Then had to "Clear Storage" on the phone and let it clear itself (a simple reset did not let this work)
9.) Once soft reset was completed, I could connect the phone, it then found it, and worked correctly.
Yeesh.
Unchecking the box everyone is saying didn't have an effect for me, though I tried it many times before going all nuclear.
Thanks for this.
Tried this on my vista laptop still no go.
If I connect my kaiser 'installs device driver software' pop up displays and when this is finished windows mobile device center starts up.
Initial connection of pro2, nothing
After having the pro 2 connected for at least 45 mins I did get an an install device driver message, the device was unknown and device center did not start up.
so it appears that the pro2 was recognised has an unkown device
additional info
loaded down a usb moniter onto my laptop.
When I plug in the Kaiser usb monitor shows connection of the device on the specific port.
Unplug this and plug in the PRO2 onto the same port nothing shows as being connected.
rapidlycomming to the conclusion problem with the data pin outs on the USB, does anyone know of a diag program that could test this out or an easy way to check this.
save me the initial cost of checking by a repairer (which in the UK can be steep)
Although my TP2 will sync with USB, most of the time I sync via a bluetooth connection.
Have you tried doing it that way?
Maybe this will work.
One unconventional way to fix this, is to go to your phones activesync. select menu, then change it to bluetooth sync. After that, soft reset phone and connect via usb.
Windows Update
Try conducting a Windows update manually when your phone is connected via USB cable.
Cheers
andrew-in-woking
this is my problem,
when i connect my hd2 it charges but the computer doesn't recognize it. on the phone settings it is set to active sync. i also have 2 computers; xp and vista, both do the same thing.
i could careless about active sync, i just want to plug my phone into my pc and transfer files in and out. ive also tried the disk drive option but still no go?
if i enter bootloader and plug it in it recognizes the usb setting but when the phone is normal, it doesn't??
it did this with the stock rom and its also doing this with nrg titanium rom.
any help would be appreciated
Same thing here.
It charges through USB but it doesnt connect.
If i choose the storage option it works fine.
I want to sync my outlook and i cant...
What the heck...?
i know this may seem a bit "it helpdesk-ish" but try re-booting your PC
Come on... give something drastic!
Already done that, rebooted the pc and the hd2...
still nothing
djchubbs said:
i know this may seem a bit "it helpdesk-ish" but try re-booting your PC
Click to expand...
Click to collapse
believe it or not i have done that mannyy times and did alot of device manager things to try and let both computers recognize the hd2 but still nothing haha..
ive had previous hd2's and they've all connected fine untill this one, maybe its this specific one thats giving me trouble. but regardless, it charges via usb then it should be able to recognize it
Check the active sync settings to ensure that usb connections are enabled. You can tell be looking at the system tray icon - there's a read circle with a white X in it if USB is disabled.
Saying that though, if it doesn't even recognise it when the device is in USB mode, I'd try a different cable. It's perfectly reasonable that the cable could power the device but not fully facilitate a USB connection.
johncmolyneux said:
Check the active sync settings to ensure that usb connections are enabled. You can tell be looking at the system tray icon - there's a read circle with a white X in it if USB is disabled.
Saying that though, if it doesn't even recognise it when the device is in USB mode, I'd try a different cable. It's perfectly reasonable that the cable could power the device but not fully facilitate a USB connection.
Click to expand...
Click to collapse
but the thing is when i go into bootloader it recognizes it as usb and i can add customs roms and such. just not when the phone is normal weird ?
k20a1 said:
but the thing is when i go into bootloader it recognizes it as usb and i can add customs roms and such. just not when the phone is normal weird ?
Click to expand...
Click to collapse
That is very weird. Sorry mate - never heard of it doing that for anyone before.
Make sure you have the mobility center/active sync program installed on your computer. Without it it won't work.
On Vista or Seven, with the HD2 plugged in, you can find the program/drivers by launching and refreshing manually Windows Update. On XP you have to do that manually.
Good luck.
This happens to me often. In my case I have found it to be a weird driver issue. Go to device manager and look for the yellow triangle. Right click and update driver software. This worked for me I hope it helps.
bit late but just flashed maxsence and i love the look, but have allready had to restart by phone 10 times in 10 minutes. I'll wait for the next release. back to GTX for now.
Good work NRG. keep it up.
this is one of the many WM6.5 errors!
need Android soon!
Ok here we go.
The phone did not connect through activesync to my pc. When i selected to connect as mass storage it connected.
I checked for driver issues in device manager but nothing came up.
I checked the hd2's activesync. Bingo! the activesync was crashing when i was running it. I had to hard reset the phone.
Now it works fine.
My guess is that maybe a program that i installed recently was buggy and created this particular problem. Unfortunately i have about 50+ programs installed (including themes etc) and i m not sure which one it was.
I was installing all the programs again today one by one and after the install process was completed i connected the hd2 to usb to find which app was the problematic one.
After installing almost(some were found useless) all of the apps (here is the crazy part) the hd2 still was connecting through activesync....
HTC will drive me nuts...
Anyway the phone now connects correctly.
I cant understand which was the problem....
as odd as it may sound i think i figured it out.
i think its the usb cable that im using, i have to wiggle it around for it to connect to active sync but once it connects its not a stable connection as it cuts in and out.
but charging capabilities work though!
pos wire, i ordered a new wire and if that one fails also, i will have to get my hd2 replaced for faulty usb port
thanks for all the replies much appreciated
@k20a1
Try to hard reset the phone.
It worked for me.
If not again, then use your warranty!
angelossssss said:
@k20a1
Try to hard reset the phone.
It worked for me.
If not again, then use your warranty!
Click to expand...
Click to collapse
i did whenever i custom rom'd it, it still does the same thing. yes it will connect via usb while in bootloader but will not during regular phone operations lol
"Disk drive" mode not working with XP laptop
HD2 is working fine with my desktop, but wit laptop I can only use ActiveSync to browse files.
When I connect the USB cable I get:
"Found new hardware wizard"
but it tells me that it Cannot Install This Harware - Disk Drive
"An error occurred during the installation of the devie The system cannot find the file specified"
And I only have "Finish" to click - if I click it the wizard lunces again immediately and goes on and on with no end.
HD"/Leo does not appare in Disk Manager (I know ablut the drive lettering issue)
I'm sure its my XP issue, but I havent found drivers to fix that, and I'm not about to reinstall XP on my lappy in near future.
Transfer files - Solved
;
k20a1 said:
this is my problem,
when i connect my hd2 it charges but the computer doesn't recognize it. on the phone settings it is set to active sync. i also have 2 computers; xp and vista, both do the same thing.
i could careless about active sync, i just want to plug my phone into my pc and transfer files in and out. ive also tried the disk drive option but still no go?
if i enter bootloader and plug it in it recognizes the usb setting but when the phone is normal, it doesn't??
it did this with the stock rom and its also doing this with nrg titanium rom.
any help would be appreciated
Click to expand...
Click to collapse
I share the same here and I was despaired of trying to solve it with any logical, as well with illogical, measures. Such as: rebooting, changing usb cables, reinstalling activesync 4.5, etc.....etc...blla..blla...blla...
However, I solved the "Transfer files issue" by taking out the sd card from the HD2 and connect it with an external cards reader to my pc.
The card reader connected and works with the same usb cable that does not work with the HD2.
That way I load it with all files and in the same occasion I reload into my computer the daily spb backup files.
However, I have the feeling that the reason for that problem is a missing file/driver named: "Setup1.SPL" in the pc windows operating system.
In order to solve that it seems that only reinstalling windows on my pc will be the solution which defiantly do not like.