Today i had no sound in vista, no error mrssages, everything seemed to work there were just no sound, rebooting and reinstalling sound driver did not solve the problem.
finally i tested sound in wm it was not working there either... soft booting wm made it work again in both vista and wm.
I am beginning to think that this is much more than just two operating system with a kvm switch.
no sound
try reinstall the drivers realtek audio
i have the same problem, and resolve it
Related
I'm having problems with audible books from audible.com. Specifically, the audible ppc software won't load on my i-mate ppc pe because it claims that it is having problems connecting to the device. Audible's help (such as it is) seems to think that the problem is with activesync 3.7.1 and that installing the old v.3.7 will solve it. Though it sounds to me like audible is just too lazy to support it's product, I tried. Loading v.3.7 doesn't make bit of difference.
Has anyone gotten audible content to work on an XDA II/i-mate/MDA II?
Audible works fine with my i-mate. Are you having problems installing the software or activating it? Personally, I haven't had a problem with either, except the software (upon install) occassionally complains it can't find the device. I find if I try to close the install it will let me install then... or I install via the CAB file.
Jon.
Thanks for the help!
Seems that if you close the box which opens when the install program "tries to connect to the device," then the install program continues to work properly and successfully installs version 3.5 onto the pda. After this, the pc-based software recognizes the pda and transfers programs to it which are usable.
Activation occurs normally for both the proprietary program and MS's Reader.
Audible.com would be wise to recognize this situation and take note for tech support purposes.
Hey all,
I have been running the underground crossbow rom for a week or so, and I must say that I like it a LOT. For those that have a Cingular 8125, I would greatly recommend this rom.
I have noticed a couple quirks, and wondered if anyone has experienced them as well. First of all, OMAPClock isn't retaining its setting. I check it every once in a while to make sure it's still running at 252, and it's back at 180. I verified this speed in TCPMP. I decided to try the OMAPClockPlus helper, and when I registered it as a notification, it seemed to be fine until I did a reset, in which it wasn't registered anymore. I couldn't even find the notification it was supposed to create. So that did absolutely nothing for me.
Next I tried manually making a notification in memmaid that pointed to the /windows/startup/omapclock.lnk that I made that has the -clock 252 parameter after it. Even though this is set to run at wakeup and still appears in my notification queue, I check it and often it's back to 180. Any ideas?? Do I have a bum version of OMAPClock? It's the one that came with the rom. Oh, forgot to mention. I commented out the line in the smartskey ini that calls omapclock since I made a notification. It works fine for a while after resetting, I assume until it goes asleep. This tells me that the notification works as it is set to 252 when I reset, but that something is failing later. Maybe some of you that know more about omapclock and how it works can shed some light.
My next issue is with Windows Mobile Device Center (ActiveSync Replacement in Vista) and bluetooth. Has anyone successfully set this up in Windows Vista? I don't like WMDC, activesync was easier to set up. basically with wmdc you can't choose which BT port to allow, you can only choose "use bluetooth." This being said I can never get "ActiveSync" to show up as a service when pairing my phone. I tried installing AS 4.5 beta and WMDC wouldn't allow me to even install it. I'd like to get it working with BT, so if anyone has a success story, would you mind sharing it?
I am hoping the omapclock issue isn't related to the rom, as I really like it so far. I used it with no problems on every other rom I've had so far. Thank you for reading this short novel, and thank you also in advance for any expertise you can share!
Sorry, I cannot help you with you Omapclock issue, but I can provide some insight to your WMDC and bluetooth issue, because I ran into the same problems.
My computer shipped with the Toshiba bluetooth stack, and that automatically installs a port for ActiveSync on Comm 7. However, after switching to the default bluetooth stack in Vista, I was able to add an Incomming Port (ended up being Comm 4), and then ActiveSync showed up as a service on my fone. I have read places that people cannot get WMDC and Bluetooth to work if they are running the Widcomm stack, and I can personally say it was impossible with the Toshiba Stack. I guess because the built-in bluetooth stack is Windows made, WMDC knows where to look to get the incomming port, becuase as you stated, you cannot specifiy it. My advise, therefore, would be to use the default windows stack, and add an incomming port, which hopefully will solve your problem.
The problem with the default bluetooth stack in Vista is that it doesnt support some key profiles, A2DP being one of them. To me, bluetooth connectivity with my phone was more important than wireless headphones, so I switched to the default stack.
Let me know if this works out.
Hi,
at first: i already did a hard reset... didnt help.
so to the topic: when i am syncing my device with active sync everything works fine. then i disable bluetooth on the touch dual.
after doing this, i cant enable it again, whether in the connection manager nor in the settings table for bluetooth. it spends 10-20 seconds with doing anything but then jumps back to "off". then i have to restart my touch dual and after that i can enable bluetooth normally --- till i sync the next time.
has anybody got a clue, why this is happening?
has anybody the same problem?
no ideas? anyone?
lastpush for today, its midnight now here in germany ;-)
good night
I too have a similar problem like yours all of a sudden I can no longer sync with bluetooth properly for some bizzare reasons it connects and it just hangs can't do anything i.e browse files or tranfer on dual however it works fine via USB but with bluetooth it has mind of it's own it just work now and then, sometimes I have to wait at 20 minutes for it to sync properly weird
Tried everything re-boot, re-paired the device, system restore, did hard reset on dual, re-installed WMDC 6.1 even to the point downgraded to WMDC 6.0 still now joy!!!
Can't fathom what's wrong!! it was working fine couple days ago did not install any new apps on my laptop and I have a Microsoft Bluetooth stack as it's well know that WMDC has issues with other bluetooth stacks i.e. toshiba, widcomm etc... this WMDC is driving me nuts!!!!
Any tips would be appreciated I'm almost giving up! getting used to the old fashioned USB sync.
Running Vista Ultimate if that helps!
i will get a new touch dual on saturday or monday next week. i then can tell you, if its a problem with the touch dual or with the pc you connect to..
but for testing you could try to send some big files over bluetooth from your touch dual to another bluetooth phone.
I've got some problems just with the Toshiba BT drivers on my laptop... it seems that the Serial Port Profile is not recognized as "Active sync" connection in the BT device manager on the Dual. I have to change the serial port in Active Sync on the laptop (to a wrong one), change again to the right port (com7) and then refresh the services for my laptop in the BT device manager on my phone. After that the sync works again...
I've tried with Microsoft BT drivers and it works fine ! Somethimes i have to stop BT on both pc and Dual, and start it again....dunno why...
I've reinstalled the Toshiba BT drivers because on my laptop with M$ drivers i can't able to shutdown the BT device... so i have to switch the com port and refresh the services everytime.... a little bit tricky but it works...
Regards,
Raid.
well but in my htc touch dual i cant swith bluetooth on after syncing *g*
i always have to soft reset
is there any registry trick or something i could try?
Bluetooth issues here, too!
Please advise if this is a known feature.
I only got my Touch Dual yesterday. So far seems a great device. However, I can not get it to turn on the bluetooth at all!
Everytime I try it says bluetooth error!
I can't pair with anything at all.
Many thanks for any help.
well now we are four people with the same problem...
I think we have to wait till the first rom update, or a custom rom...
I emailed HTC support - their suggestion is that I try a hard reset - not done yet.
If no luck with the reset then it might be an electronics issue! If so it will be a discussion with Orange to get fixed.
I will update you on progress...
Well, I can confirm, as expected that the Hard Reset did nothing at all!
A new phone is on its way to me apparently...!
i have same problem with you..i had hard reset but bluetooth still did'nt work...i had hardSPL, change radio and ROMs but the problem still exist...
Dear Xda's, i have a problem and i need help! I would like to know if there is anyone that knows a rom in which the w100 remote control works perfectly? Since all the Roms that i have tried lately (Dutty, L26, UDK) fail misserably when i try to make to make the remote work. They all af the same problem that they just dont recoqnise the remote, if i plug it in, the sounds still comes over the speaker instead of the headphones.
I also tried the drivers on each rom but they fail to install since its not necessary accourding to them. I have tried extracting the drivers and install one of the seperate drivers but they eather cause my touchscreen not to work or my sound disappears.
I've used the search btw and googled, but after 3 nights for searching and trying i havent found anything so far.
If someone knows a rom, driver or anything that works, please say it here since im gettin a bit frustated. Thanks!
Bump, anyone plix?
Just gonna do smooth bump again since after a month of trying still no succes. HTC isnt responding with an answer so my only hope is here!
L26 KaiserDiamond Throttle Launcher Beta 6 works partially
I have a Kaiser (tilt) running this ROM and the sound is OK. Volume control pops WMP (I use S2P) - mute pops Audio Control and I did not have a chance to test the phone funcitons. But at least I can liste to music
Did you try the original HTC Tytn II ROM posted somewhere in Kaiser ROM development ?
I hope this helps.
I am new to the HD2 having previously been a ZTE Blade user. I have set up the phone to be dual booting phone with WP7 in the Nand: HD2O© v2.00b3 WP7 TANGO 8773 FULLY UNLOCKED.
I have two problems on which I would welcome help:
I have low earpiece speaker volume when listening to calls. I have tried to change HKCU/ControlPanel/Volume/MaxinCallUIVolume from 10 to 15 as suggested in the FAQs but it does not change the maximum volume.
I have WMDC installled on my PC and run in from the WP7 rom but WMDC on the PC does not recoginse it. Zune however does work.
Any help greatly received.
Andy
Speaker sound
Have just checked the Forum for the Rom and it appears that the sound from the earpiece cannot be changed for this rom.
WMDC Issue
I still have problems getting WMDC working any help greatly appreciated