Database Users

Going crazy with ActiveSync via bluetooth

Hi,
I've got problems tu configure my MDA2 to use ActiveSync via bluetooth.
Is somewhere a step-by-step instruction or can someone tell me, wich steps a necessary to establish this connenction ??
After I upgraded the rom and after about 20 hours trying, I was able to synchronize via bluetooth. Yesterday, I have to reset my device (complete) and installed everything again...but now, I'm not be able to get activesync via bluetooth working...
please help...
rob.

I was having difficulties as well. I wanted to Sync using Bluetooth because that way I can leave the unit in the leather case and just plug in a charge cable instead of cradling it.
I did the following:
In 'Settings/System/Bluetooth Settings' I pressed the start button underneath "Bluetooth ActiveSync Setup". I then paired with my PC. Then I could start ActiveSync on the device, and by selecting 'Tools/Connect via Bluetooth' it would connect. By setting it to not release the connect after it's done synchonising, I can even network over it.
However, after going to sleep and waking back up the connection is gone. Reconnecting won't work because something in the XDA still thinks it's connected, so it needs a soft-reset before connecting again.
This is on a device with ROM 1.52 though, will test on 1.60 later on. It's a pain that just pressing 'Sync' will not work, and that you have to manually select the option from the tools menu.

I'm not even able to start the connection to my PC.
When I use ActiveSync and say "Connect via Bluetooth" on the O2, it does nothing.
I'm able to use bluetooth to exchange files and that's barely all.
I have an ActiveSync profile in my bluetooth manager on the PC (WidCOMM stack) and can affect a COM Port but that's all...
Can anyone help ?

Hi,
@ Peter Poelman,
thankf for your reply. The way you described is exactly what I have done the last 2 days (about 500 times :shock: )
Now I know, where the problem was. I had the same behaviour like Murcielago. AciveSync did'd do anything, when I tryed to connect via bluetooth (of course, tha PDA and the PC were paired).
I remeber, as I set up the connection the first time (some weeks ago as it works), after pairing the device with the PC I got a messagebox on the PDA , which said that ActiveSync-Setup is now finished (or configured or something like that). I didn't get that yesterday.
I had installed a Bluetooth-GPS-Serial-Driver (from Towa) and it seems, that this one made the trouble. After I had removed the driver, the connection works great again. It seems, that removing the GPS-Driver is only necessary for the first setup of the connection...after the connection was made, I have installed the GPS-Driver again and now both works...
thanks a lot
rob.

I uninstalled the Towa patch this morning but nothing changes.
It's as if pressing Connect via bluetooth doesn't even answer.
When I try, connect via IR, I get a box telling me "Connecting to host".... but nothing like this with Connect via Bluetooth.
I really don't understand that ****ing bluetooth. It's not a intuitive technology.
I bought a WiFi module for my PC and I'll receive it today. I think I won't have to bother with that crazy bluetooth anymore.

The Towa patch is the culprit. It is not enough to uninstall it. You have to hard reset your device to really undo whatever it does. I had the same problems you describe. After a cold boot, I could successfully initiate the bluetooth active sync and I could then install the patch which worked and allowed the bluetooth sync (if the activesync cluetooth bond was created before installing the Towa patch). Now, however, I upgraded to the 1.60 ROM which fixes the bluetooth serial driver issue and no longer needs the Towa patch.
After all that work, I generally still sync in the cradle, because I like to charge the battery in the cradle. Go figure.
Panabax

hi,
I've the same problem,
when I try to connect trough bt I recive a popup saying "status: connecting to host".
I've an xda II with rom v. 1.52.00wwe and BT fix by towa.
Is anyone so gentle to send me (or post a link) the widcomm stack?
[email protected]
I hope it could resolve the problem.
thank you so much,
rubenio.

WOAAA TOWA
His last version of the bluetooth patch is incredible and activesync via bluetooth worked in less time then it took me to install the patch.
I now have ActiveSync via bluetooth and internet access via activesync.
Take it there : http://bluetooth.i-networx.de/index_e.html
I think he really did a tremendous job and the rest is coming (network access, etc...)

Can't get Bluetooth and Active Sync to work (1.60 ROM)
Hi !
I've also upgraded my device with the new 1.60 ROM, but I'cant get Bluetooth to work with active sync.
I've selected the "Inbound COM port 4" under Bluetooth Settings. After the device is bonded and I search for services my Logitech bluetooth device display the COM 4 serial port. But when I try to connect it display the following error: Could not establish connection with the remote device. I think it maybe is my settings on the PC.
Hope for some guidance :wink:
Panabax said:
The Towa patch is the culprit. It is not enough to uninstall it. You have to hard reset your device to really undo whatever it does. I had the same problems you describe. After a cold boot, I could successfully initiate the bluetooth active sync and I could then install the patch which worked and allowed the bluetooth sync (if the activesync cluetooth bond was created before installing the Towa patch). Now, however, I upgraded to the 1.60 ROM which fixes the bluetooth serial driver issue and no longer needs the Towa patch.
After all that work, I generally still sync in the cradle, because I like to charge the battery in the cradle. Go figure.
Panabax
Click to expand...
Click to collapse

Magneto and I: The first week

The following should give users an idea what they are in for if they decide to take the plunge...
It happened again. Out of the blue, my XDAII froze, then turned itself off. I closed my eyes and there it was, this terrible electric 'bling bling' sound. I didn't have to open my eyes to confirm that another hardreset had just happened on my XDAII. No particular reason. As if my XDA wanted to tease me, it had just decided to clear everything in its memory, all installed programs. And now? installing everything again? when there was no insurance that it wouldn't hardreset itself again?
No, I said to myself, not this time. I opened the file explorer on my PC and did what I thought I would never do: I started the upgrade to install Magneto or better known as Windows Mobile 2005 on my XDAII.
When I downloaded the Magneto files, I thought to myself that I would just keep them for storing. You never know. One hardreset later and suddenly Magneto sounded like a godsent to me.
The upgrade went smooth, very smooth in fact. Before the upgrade I deleted the extended rom files and storage files. Maybe that helped.
All OK? Not quite. I could not connect to my PC and activesync via USB. Everything worked well via Bluetooth, but USB? No chance. I found out that it had something to do with XP and not having the servicepack 2 installed. Well, no choice. Goodbye USB sync. I could live with that since I still had bluetooth.
Once I had Magneto running, I started installing my standard programs. Most of them worked. The only one that did not was WorldMatePro. OK, I tried to live without it.
I installed most of the programs into Storage. They all worked. I even tried to install some of them into Buzz' RAM disk. A few worked as well, some couldn't be installed there. Well, I anyway planned to use the RAm disk for storage.
I was actually surprised that XCPU_Scalar worked. Well, even Magneto is now overclocked to 530 MHZ on my XDAII.
I also installed PocketZenPhone and Pocketbreeze. Somewhere I had read that these programs would not run on Magneto. But no issues on my machine! They both worked. The only issue I have with Pocketbreeze is that the category icons & colors are gone. Pocketweather also worked fine. Again, I was surprised that Magneto was so compatible.
Unfortunately, PocketContacts was a dead-end. "No contacts found" was the only message I ever got from it. Goodbye PocketContacts.
I had a few more programs in my folder on the PC, but the memory on my XDAII with Magneto is limited. Very limited. Very very limited in fact. But for me not such a big issue as I do not have too much necessary software on my XDA. I could live with this limitation for time being.
Anyway, I wanted to try Magneto for a week and see if I stayed with my new friend.
After I made the first few phone calls with Magneto I was impressed with the dialer. Nice interface. Also, it seems to me that the phone connects much quicker to the provider than before.
But why didn't they include something like the intellidialer? Well, the new contacts application is quite nice, so I will use the contacts instead. Not too bad.
Then, on day three, the disaster. Suddenly, the screen stopped reacting. Well, it actually didn't stop, it just didn't react to the places where I touched it with the pen.
I was already thinking about "hardreset", when it came to me that the screen orientation was wrong.
I had installed Vitobuttonmapper and mapped <rotate screen> to the record button as press and <start bluetooth> as press & hold. I figured out that I must have pressed the record button not long enough, therefore the <rotate screen> command was executed. But somehow, the screen orientation remained in Portrait but the touch screen was now in landscape.
I managed to fix this problem by changing back to Portrait and making a softreset. Then I tried to repeat this error. Yepp, the <rotate screen> was the culprit.
Consequently, my Magneto has no screen rotation anymore. But I can also live with this.
The rest of the week went fine. Magneto is stable and smooth.
Now the final question: Will I stay with Magneto? Yes, I will. I am often travelling and therefore I need a device that I can rely on. If I'm on the road and my XDA hardresets, I'm dead. Therefore Magneto is the solution for me. No hardresets, and even if the battery goes dead, I'm safe.
But one thing is clear to me. When the first Magneto devices come out, and hopefully there will be the Magician with Magneto, I will immediately retire my XDAII and buy one of these devices. Magneto is the future. No doubt about it.
What do I like the most about it besides the "goodbye hardresets"? for sure the softbuttons. Just great!
I hope this was useful.
Cheers
Pat

Hmmm.... Interesting.... Very, very interesting!!!!
I think I'll try Magneto real soon... However, I have a question: Is it possible to return to 2.06.00WWE just in case?
Thanks for such detailed story!
Best regards,
Rayan

return to 2.06.00WWE
pschoch said:
I could not connect to my PC and activesync via USB
Click to expand...
Click to collapse
I have the same problem. But let me just say that I have 2 harddrives on my PC. Both with Win XP + SP2. I tried to synch Magneto on the harddrive I frequently use but it DOESN'T work... So I tried booting my 2nd harddrive. This 2nd harddrive has a fresh installation of Win XP + SP2 and other essential utilities like Office suite, WinZIP, etc.
And guess what...activesync 4.0 using USB WORKED using my 2nd harddrive. Very ODD...
Rayan said:
I have a question: Is it possible to return to 2.06.00WWE just in case?
Click to expand...
Click to collapse
YES it is possible to return to 2.06.00WWE...I have done exactly that.
I have been running Magneto for about 1.5 weeks. And I must say it's GREAT! But as you know it's just a leaked version so it has a LOT of bugs. So I've decided to go back to 2.06.00WWE until Magneto is more stable/reliable.

How to configure Connect via bluetooth ?
I done the WM2005 installation and i manage to connect via USB with everthing sync. But i like to know how you can setup the activesyc via bluetooth ? I own a Level One bluetooth dongle and i did try to connect via bluetooth in WM2003 before i upgrade to SE. Now in Wm 2005, i still have no luck to get it work. Help !!!
I m using Windows 2003 and had configure Comm 5 in ActiveSync 4.0, added bluetooth serial port 5 in widcomm drivers. And also i pair my XDA2 with my machine several time to make sure it is paired. I try everthing include try to do file transfer from my deskop also no luck.
Btw, i can't discover any ActiveSync service in "My Bluetooth Places", i can only see "Dial up networking, Push Object". I do c actvesync in WM 2003.
Everytime i choose "Connect Via Bluetooth", will get this message "Cannot find an existing Bluetooth partnership with a PC that supports ActiveSync. Would you like to set up a patnership now ?" Yes/No button. But i had done the pairing before that ?
please help.

Change "Secure Connection" to "Not Required"?
Works for me, without Magneto (yet)

pschoch said:
It happened again. Out of the blue, my XDAII froze, then turned itself off. .........another hardreset had just happened on my XDAII. No particular reason.
I was actually surprised that XCPU_Scalar worked. Well, even Magneto is now overclocked to 530 MHZ on my XDAII
Click to expand...
Click to collapse
well... think I know why you're xda froze... I overclocked the cpu on xda and when the speeds are 2 high the device will hardreset!!
p.s. magneto rulez! tnx buzz!

I've got the same problems with activesync via Bluetooth. My device doesn't seem to recognise the Activesync service on my Sitecom Bluetooth device.
With 2003SE I didn't have any problems. Madkat's proposal didn't work.

Update to WM5
You are lucky, I was tryed whole last night but fail, it always give me the message "Error 101 - Connection error". USB connection is very good, I could do everything with cable :shock:

Re: Update to WM5
I have got the same problem connecting bluetooth adaptor D-Link DBT-120 with o2xda2 running on 2k3 not se. Anybody help?

Hello amigos!
On this page you can find a possible solution for the Bluetooth/ActiveSync problem.
http://forum.xda-developers.com/viewtopic.php?t=20727&postdays=0&postorder=asc&start=100
Best regards,
Rayan

Re: How to configure Connect via bluetooth ?
clementluy said:
I done the WM2005 installation and i manage to connect via USB with everthing sync. But i like to know how you can setup the activesyc via bluetooth ? I own a Level One bluetooth dongle and i did try to connect via bluetooth in WM2003 before i upgrade to SE. Now in Wm 2005, i still have no luck to get it work. Help !!!
I m using Windows 2003 and had configure Comm 5 in ActiveSync 4.0, added bluetooth serial port 5 in widcomm drivers. And also i pair my XDA2 with my machine several time to make sure it is paired. I try everthing include try to do file transfer from my deskop also no luck.
Btw, i can't discover any ActiveSync service in "My Bluetooth Places", i can only see "Dial up networking, Push Object". I do c actvesync in WM 2003.
Everytime i choose "Connect Via Bluetooth", will get this message "Cannot find an existing Bluetooth partnership with a PC that supports ActiveSync. Would you like to set up a patnership now ?" Yes/No button. But i had done the pairing before that ?
please help.
Click to expand...
Click to collapse
Try this link http://www.geekzone.co.nz/content.asp?contentid=1421

Re: How to configure Connect via bluetooth ?
Thanks everyone for the solution. I had to revert back to 2003SE by Xdajojo version, because 2005 did not connect with usb or bluetooth adapter. activesync 4.0 does not seem to work properly on my device (O2 XDA2). I changed back to activesync 3.8 and worked properly with 2003SE. I can even go on internet using activesync. Also I have TOMTOM 3.0 Bluetooth version wich did not install on 2005. I will wait until proper stabilised version of 2005 is released by xda-developers team.

Bluetooth ActiveSync Setup Help please.

Hi Members,
I have just joined the site and this is my first post to try and find a solution to the most annoying frustrating problem im having. I am trying to connect a o2 XDA Mini to my laptop via bluetooth over a belkin dongle. My system only shows com port 4 then 9 12 etc. I have tried using 4 many times. Both the phone and the pc partner ok, but then when i try to sync from the handset the PDA try's to partnet again and will not connect. I have tried other ports, no good! same result. I then searched google extensivly and tried installing other stacks Widcomm, blue soleil etc as i aslo have cards and dongles for those, still no joy. Is the phone broken? Well my wife has the same make and model. Her one wouldnt connect either!! whats the problem with this phone/PDA. Do you have to be a rocket scientist to use BT or what. I visited other sites and forums and posed the question there. Apart from one reply it appears no one seems to know either way. Any help or guides other than the outdates geekzone(2004) would be most appreciated as i think those guides were not created for WM5 systems lol
Thank you and fingers crossed lol
EFM

I've always had problems syncing over bluetooth.
I dont have a WM2005 device, but my XDA mini exhibits the same problems.
I did get my xda to sync through bluetooth on my windows computer, but that was using bluesoeil. Strange thing was, after i switched stacks to the normal windows one, when i successfully sync'ed through bluesoeil, it WORKED!!
A hard reset has happened since then and im plagued with problems.
If you use a mac and a PC like me, i found it very easy to sync my xda mini through bluetooth with a mac. (provided you have buy the software).
If you search even harder through google, theres a page i came across which shows you, through windows cmd line, delete ports and free some up. Havent tried it tho.
Anyways goodluck, try hard resetting and starting fresh if you wanna sync wirelessly that bad.

Try this
Try this , it may work for you. Also I found that XP SP2 is needed if you wnt to sync via BT
http://forum.xda-developers.com/showthread.php?t=246847
Good luck
Ciao

works perfectly for me using different versions of vidcomm on the belkin and logitech dongles i have on various computers
on the pda i just choose the IMSync or whatever it's called as profile
and start activesync on the pda click on sync over bluetooth and it does

Heres something i found...
http://help.lockergnome.com/general/Activesync-Port-Availability-Bluetooth-ftopict26563.html
http://support.microsoft.com/default.aspx?scid=kb;en-us;315539
thats how to delete ghost ports from your system.
I got everything NEARLY set up, i cant set a outgoing port!.
I even hard reseted, still no luck, i think i just need to set a outgoing port to get this to work.
whitemoo.

ok...after restoring my backup from the hard reset, i rebooted the phone.
Then i got side tracked and went on the XDA-developers wiki.
Seeing that 'set up your own bluetooth personal network' article, i decided to set it up.
Figuring out that the original bluetooth stack is worthless, i switched to bluesoeil and rebooted.
Bluesoeil did not work for some reason, and couldnt find my bluetooth hardware, so rebooted the phone with the normal stack.
I went into the normal stack that came with my phone, and mysteriously, i could set outgoing ports!
I set the port my outgoing port to comm0 and tried to sync.
AND IT WORKED!!...its finally syncing!
Oh btw, i found this file in my ext rom: called 'default_BT_com_port0.cab' i installed it and it allowed me to set comm0 in the normal staCK. Previously before i installed that cab, i couldnt see ANY avalible com ports to set.
YAY!...whitemoo.

Hi
Thanks for the advise there it was appreciated. I have tried the different bluetooth devices two doggles and a card all with widcomm and microsoft drivers all have not worked blue soleil wouldnt find a serial port on my phone only dUN and Push obex. I have spent ages on this now i figured it just a worhless wm5 smartphone with a keboard.. oh MS if your listening re XDA Mini factor it in to the guidebook how to sync to an everyday computer to bluetooth. You provide the function but it dont work.. crapper ive had it with this overated smartphone with a slide out keyboard. worse thing is how much i paid for it. what a rip off!! I could get an old C500 WM2003 to BT sync on all three of these BT dongle/card.
Oh well thx.. Guys glad you got a result with yours bravo' lol
Many thanks for the input.
EFM

Hi again,
I have tried to contact o2 re this matter they tell me it cant be done via activesync and bluetooth. Has any one else managed to sync an XDA min via activesync to there computer. I am running xp pro SP2, Activesync Ver. 4.1 of the cover disc with the phone. I downloaded 4.2 and 4.5Beta to make sure none work. Google searches reveal nothin g on the subject. The model i appear to have is the WIZA200 version with WM5 rom version 5.1.195 (build 14847.2.0.0).
Any clues folks
thanks.
EFM

Can anyone help me please with this problem?
Thanks.

Bluetooth Freeeeze

Hi to all.
Do someone have problems with the activation of the bluetooth feature on this pda?
For example when I try to enable it on comm manager, my hd2 simply freeze, and the only solution is to reset the equipment. What is strange is that when it comes back the bluetooth is on.
I don't have tomtom installed, the rom is 1.48 wwe htc and I have this problem with 1.43 rom also.
Please can someone help me with this subject.
Best regards,

Someone ??

same thing happen to me
and i have another problem
i cant send files via bluetooth using resco explorer ??
but by using the normal file exlporer no problem
anyone have the same problem ?
im using miri 1.2 rom

Up Up .. Someone with similar problems ...

Hi,
I had a similar problem with my HD2.
Activate BT took a very long time and failed with an error message, I can't remember it but it says that it wasn't able to activate BT.
I did a HARD reset and everything went ok !

same problem here. I use bluetooth for the carkit in my car. But since bluetooth is a huge battery drain, i turn off bluetooth the moment i get out of my car again. And turn it on when i get into my car. All via the comm manager. Here on miri 2.0 based on the 1.61 rom the problem is also present. The only way to fix the bluetooth freeze/malfunction is to softreset the device. At startup of the device bluetooth is indeed turned on....

Me too having the same problem
It got struck when I've tried sending files to my friend's phone via Bluetooth. I restarted my phone to get it up (luckily it got up with Bluetooth on)

today the bluetooth freezed when im trying to turn it on via comm manager
softreset solve it
im using miri 1.2 rom

in this time the sms get stuck in outbox...
its the same problem.
try pinch2zoom in fileexplorer....it doesnt work, and alarm doesnt ring too...

me too
I have the same problem and still do :-(
My HD2 freezes when I connect to my PC through comm manager/ActiveSync. The only solution is soft-reset!!
I have latest ROM 1.66.403.1 DAN
I can't figure out why and how to fix it... anyone?

Active Syn BT Freeze
I have the same Active Sync / BT freeze problem. I use Miri V.22 6.5.x. Believe having this problem since V 17.x. I don't remember having this when I first flashed ROMs in March.
Any update on the issue?
Thanks

Possible solution
This seems to have solved my problem.
http://forum.xda-developers.com/showpost.php?p=7025327&postcount=23
I could not delete/rename BtCoreIf, but just deleting BtSdkCE30.dll and making BTTrayCE.exe as a shortcut in startup is working so far. Two long syncs with no freezes.
I hope this helps others.

It froze after an hour connected. Better but not great.
Finally managed to delete BtCoreIf.dll. Trying the next few days to see if it solves the BT problem.

fixed
I found out that my BT was freezing because of third party application which I have installed in my phone. I uninstall it and never froze since

Fixed as well
Thanks. Yes, this seems to be the case here as well. I managed to follow the instructions I provided above, deleting the two files TomTom had changed, and now I'm back to having my BT Active Sync working well again.

ActiveSync via Bluetooth FREEZE

My HD2 freezes when I connect to my PC through comm manager/ActiveSync. The only solution is soft-reset to get it back again but once I reconnect to my pc (ActiveSync) through bluetooth, it freezes again. It happens each time I do so..
I have latest ROM 1.66.403.1 DAN
I can't figure out why and how to fix it... anyone?

anyone :-(

had same thing with my x10 ... found out later on that sony ericsson pc companion software which was installed was monitoring bluetooth stack and was causing comp to freeze anytime bluetooth is used. I removed it form startup and everything was back to normal.
check htc sync maybe and disable it from startup, maybe it does the same thing