Database Users

REstoring original ROM

Please help - this is urgent. I need to get my XDA back to the original ROM. I have the latest ROM upgrade from O2 as a NBF file. I upgraded to PPC2003 and when I try to restore with the latest O2 nbf file I get an error message. I am about to purchase a card reader. Can someone please tell me if it is possible (please dont say I cannot go back!!)
Thanks
Bob :b

Bob,
This is only sugesstion; have you tried to go to O2 UK for their software update? They have ROM 3.17.03 and 4.21 both in exe files. It is alot more simple to run them.
Rgds

I'm in the same situation. I have a MM/SD flash card, and am trying to do the same.
I tried to update the ROM, and now the SX56 is stuck on
"Upgrading, this will take about 5 minutes"
I can't get it to connect to my PC now.
I CAN get into the wallaby bootlaoder (v 5.15)
I've tried to copy a NBF file (and other files) to the MM Card.
Then boot to the bootloader. But then I'm stuck. I don't know how to execute the nbf file on the MM/SD card to re-install the system.
Any ideas?

To restore your PPC2002 back from WM2003, you have to manually reflash it using the Bootloader method
There is an error if you try to use the ROM Update Utility to downgrade to PPC2002

Excelent Information ! ! !
I'm getting close!
I guess my problem is now, is that
I only have a nbf file, and not an nb1 file.
Where can I obtain a nb1 file?

AlexF said:
Excelent Information ! ! !
I'm getting close!
I guess my problem is now, is that
I only have a nbf file, and not an nb1 file.
Where can I obtain a nb1 file?
Click to expand...
Click to collapse
You can write either an nb1 OR an nbf file from XDArit. Make sure you select the correct file-type from the pulldown menu.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I'm so close I can smell it.....
But whenever I try to "write it" to the MMCard using XDArit,
I get the message
"Failed to Open device \\.\PhysicalDrive27"
I've even tried another reader, and a different USB ports.
(I have usb1.1 and usb 2.0)
And I can copy files over to the MMCard in Windows.
But it can read it just fine, whenever I extract from the MMCard.
Any Thoughts?

what version of XDArit are you using? if it's 1.2 try using 1.0.....

My version is 1.0.2.0
I am not able to locate another version.

Get xdarit 1.0 from www.yorch.net.
Hope you can get it. If not, I can send it to you, where should I send it to?
Rgds

You all are BRILLIANT ! ! !
Thanks so much! It works perfectly ! ! :lol: :lol: :lol:

Cant continue upgrading in step 4
Hi ,
Anyone please help me i cant continue upgrading my XDA. I try to use adaptrom but the programe only run until step 4 after that show error message "Cant open USB port". I cant upgrade using bootloader because my bootloader gone/ i can't access the bootloader. Please help......

that's because your cradle is connected to a USB hub, connect the cradle to the computer directly and the problem should be solved.

restoring rom
After I had install the new WM 2003 rom, i have so much problem and try to reinstall back the 1.1 edited version.
After a few push here and there, I found out that in the 1.1 rom there is a start (MS-Dos batch file and adapt rom) and this file can help me to reinstall the 1.1 rom back to my XDA unit under windowsXP.
Double click the Adapt rom then start and it will run the update.
Hope this will help others that stuck in the process trying to go back from 2002 rom.

USB HUB ???
I connect directly to my USB Port on my laptop and try use usb cable without cradle still get same problem :twisted: . OCMAX where do you live in malaysia in KL, because now I am in KL. and 3 days ago I went to XDA Service Center in malaysia, i found on XDA website they show me this address around "Bandar Sunway Metro" but they just small shop selling Alcatel Handpone (they distributor from alcatel) this make me diapointed because the didnt do anything. Do you know service center XDA di KL the expert one, please inform me the address

Re: USB HUB ???
lantronix said:
I connect directly to my USB Port on my laptop and try use usb cable without cradle still get same problem :twisted: . OCMAX where do you live in malaysia in KL, because now I am in KL. and 3 days ago I went to XDA Service Center in malaysia, i found on XDA website they show me this address around "Bandar Sunway Metro" but they just small shop selling Alcatel Handpone (they distributor from alcatel) this make me diapointed because the didnt do anything. Do you know service center XDA di KL the expert one, please inform me the address
Click to expand...
Click to collapse
Yes, I'm in KL too. I went to that shop also. It also give me a shock when I first saw that shop, but you need to go up to 1st floor which the O2 repair centre is. but make sure you reinstall all the original OS before you send your unit in. if you had flash the radio rom to 4.21, I think it will be a bit difficult to flash back to the 4.17 original one. I had try flashing this rom back but it always stuck at 1% and it will not go any futher.
I don't know what is the problem with your unit so I really don't know how to help you ?
Tell you a bit of my unit problem. When I first bought the unit I was so happy with it, give me confident that this will be a good buy. but nightmare came after a week.
1st - problem is the contact will not pop out if I press the button.
2nd - problem after I sync with my PC some of the application will not work if I don't do a soft reset.
3rd - Loss of radio signal and can't do any thing unless I do a soft reset.
4th - Sparking sound when I call out or in between a call conversation.
Hey I'm running at clean OS, but the problem still there. So I sent the unit to the sunway repair centre. You know what! they also don't know what to do with my unit. only help me to flash my unit rom and told me that maybe this will help. after I left the shop the problem came back again, that's where I found this XDA-Developers web site that really help me a lot after flashing my unit to the developers v1.1 ( Thks alot guys you are the best ). some of the problem is gone now, but the sparking sound is still there.
Anyway Hope you will find somebody here can help you with your problem. Sorry about my english.

Help and advice with CID and Artemis Touch 3.01

Ok so I have a O2 orbit with windows mobile 6 offical from their website. But then I seen this:
http://forum.xda-developers.com/showthread.php?t=342298
Thought it looked intresting and wanted to flash my device. Not knowing which version meschle use i thought it was best to unlock my CID first. I used step one in his package and after waitng for over half an hour the command application didnt get past Initalizing.
I then went to here:
http://forum.xda-developers.com/showthread.php?t=311403
And downloaded it directly and tried again, but still exactly the same result.
So now iv downgraded my phone to the original windows mobile 5 ROM that I found again on this site and tried the CID unlocking again but still nothing.
My question is what should I do about this situation ?
Is the meschles ROM based on the O2 original package and will I be ok not CID unlocking ?
Any suggestions on another way I can CID unlock?
Thankd for your time,

Is it Vsita system?
Anthony2oo5 said:
Ok so I have a O2 orbit with windows mobile 6 offical from their website. But then I seen this:
http://forum.xda-developers.com/showthread.php?t=342298
Thought it looked intresting and wanted to flash my device. Not knowing which version meschle use i thought it was best to unlock my CID first. I used step one in his package and after waitng for over half an hour the command application didnt get past Initalizing.
I then went to here:
http://forum.xda-developers.com/showthread.php?t=311403
And downloaded it directly and tried again, but still exactly the same result.
So now iv downgraded my phone to the original windows mobile 5 ROM that I found again on this site and tried the CID unlocking again but still nothing.
My question is what should I do about this situation ?
Is the meschles ROM based on the O2 original package and will I be ok not CID unlocking ?
Any suggestions on another way I can CID unlock?
Thankd for your time,
Click to expand...
Click to collapse

No windows XP pro, service pack 2. With all the updates up to today and im logged in as administrator.
Sorry for not adding this and thanks for your reply.

have you deleted any sync'd devices and then plugged your phone in, then when active sync finds the device just press cancel so that it adds the device as guest. this worked for me!

No I didnt do that but I seemed to have got it to work.
I used a different machine which had just been formatted with windows XP service pack 2 and because this software is old, I downloaded activsync 4.2 onto that machine and it worked first go.
Another problem im having which is on both machines now. When I run the RUU, it gets the image version of my phone, but it says upgrade to image version 1.000000 see below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It happened on version 3.0 and 3.01 from multiple download sources. If you continue it gets to 3% and stops saying file is currupt.
Any help ?
Thanks for everyone who offered help.

Put cert_SPCS and EnableRapi on storage card>zip, then install them.
Then try to flash another time.

Missing...
1. Transfer Cert_SPCS.cab and EnableRapi.cab to your phone
2. Run Cert_SPCS.cab FIRST and EnableRapi.cab SECOND
if there's a popup asking you to allow installation select YES
3. SoftReset your device

Ok finally i got it to work.
I used the other machine that managed to run the application properly. After that process had finished, i started step 2 straight away een though the screen of my phone was white. this worked with no problems. Last time I was restarting the phone to get rid of the white screen.
Never used the above method by coccobabbo, but could you explain it to me ? What are those applications ?
Will use that next time a new ROM comes out.
Thanks again everyone.

Anthony: That's basically the same as flashing USPL from the PC, but without a PC. You can also call it "Vista solution"

Polaris SIM Unlocker & Hard-SPL

Yes folks... the one you've been waiting for... finally managed to get the patched AMSS to boot... a nice big "up your arse" to Qualcomm.
OK... so, here's the deal... download it, follow the instructions... NO, it won't work for your Kaiser/Artemis/Motorola MR1, so don't ask.
for those of you who are already Hard-SPL (and I mean those of you who didn't manage to completely **** up replugging their USB); you may skip Step 1 by running it, then cancelling the rom update immediately... however, there's really no harm in doing it again, just remember the golden rule:
your PDA *MUST* be in WM and happily synced with the PC BEFORE running each new step.
[SIZE=+2]Download Here[/SIZE]
PS: If you try to sell this, I will find you, kill you, and sell your ****ing testicles on eBay

downloading and testing....post result soon

nice job finally done. enjoy everyone. ill try to help if needed here too.

Downloading and testing too i'm so happy i'll be able to use my Polaris Thanks.
I follow all step skip 1 and all is good my Sfr Polaris can run Orange card thanks, i don't regret my donation
edit: i'm using French Vista Ultimate Sp1 32bit, and i have the bepe WM6 1.28.405.1 FRA 0.57 when i flashed my phone.

good to hear, further feedback appreciated.

thanks m8

hi, thanks a lot for this tool.
I have a problem, when a run the PolarisUnlocker.exe windows xp pro tells me a 0xc0000135 error.
What should i do please?

Hi, I'm a french user, just unlocked my HTC Touch Cruise from SFR, to put an Orange SIMcard, works great ! Thank you OliPro.
Just for your feedback, I'm using Vista SP1 with User Account Control disabled, and that's all. So no scepticism to have with Vista !
Thank you again, phenix11

Thanks you !
But doesn't works on my device with ROM "Polaris WWE_1.28.405.1" (Polaris_FRA_0.58_Full_bepe)
After Step 3, the GUI program has launch on my touch and i have this message :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Edit 1:
I reboot my computer, and launh again SimUnlocker and is working !

Hi
I unlocked my HTC Touch Cruise from SFR, to put an Orange SIMcard, works great ! Thank you OliPro

Big thanks for your job Olipro!
My Cruise is unlock!
Very greats!!!

woked perfect,3Q

evenmor said:
hi, thanks a lot for this tool.
I have a problem, when a run the PolarisUnlocker.exe windows xp pro tells me a 0xc0000135 error.
What should i do please?
Click to expand...
Click to collapse
Hi evenmor,
Download .NET Framework.
Regards,
Frank.

Well done olipro You finaly made it! It looks easier now!

Good job OliPro!
For a brand new SIMlocked (SFR-like ) Cruise, what would you advised?
CID unlock or SIM unlock first... ? The "better faster stronger ... " (Frenchy Daft Punk reference, as SFR may be the most discussed SIM locker ) method?
Thanks
EDIT: as this package doesn't include any "readme" file (only includes exe), could you confirm that it does not require any process before? Is Hard-SPL update already included in this new pack?
Another detail: is there a requirement concerning the introduction (or not) of a SD and/or SIM card before updating ? And Sync or Reset (Hard/Soft) ?
A tuto of "what should be avoided" or example of "what should work" would be greatly appreciated!
If you can confirm that with a new original phone, ie. "without Hard-SPL", "without SD" "without SIM" "without reset" and only a USB sync, it's a good solution that should work, I try this ASAP! Thanks!

I was so excited that I couldn't wait for answers...
I tried this new binary, but my PC crashed/rebooted! please help!
I will try to explain as precisely as possible:
First, my system is Windows XP SP2. I was in "user mode" (not admin).
Then I connected my phone in USB, Sync (Ms Active Sync) and ran the PolarisUnlocker.exe.
Step1: I accept to flash Hard-SPL. I agree, and then the bar is displayed with 0%. My Phone asks for "accept the update" I say "yes". Then, the bar on PC is still at 0% and the PC reboots!!! After that crash, the phone is blocked on what should be the Hard-SPL screen? (a 3 color screen Polaris PFG SPL-1.00.1000 CPLD-2 with Replug USB Cable message at the top).
What should I do?
Please help, I'll do my best to give you all the feedback details.
Thanks.
EDIT: It seems that the only thing I can do now is removing the battery to put the Cruise OFF? Should I do a reset, and how? Any help would be greatly appreciated, I've no more phone (and of course can't sync anymore to apply the process again)!
Optional question (not really important compared to that crash consequences): Do you have an idea of the crash reason?
Does this PolarisUnlocker includes an update of the ROM and Radio part? If yes, it updates the version to a newer one?
EDIT2: I did a soft-reset to restart the phone. It came back to its original state, ouffff. Should I try again the process (ie running PolarisUnlocker.exe) or is it risky? Did I miss something before running (hard-reset before applying SIM unlock...)? Thanks

Good job Olipro, i dont regret my donation thank you

fab35 said:
EDIT2: I did a soft-reset to restart the phone. It came back to its original state, ouffff. Should I try again the process (ie running PolarisUnlocker.exe) or is it risky? Did I miss something before running (hard-reset before applying SIM unlock...)? Thanks
Click to expand...
Click to collapse
Just run it again, and don't use such a **** PC.

Finally, it's doneeeeeeeeeeeeeeeeee !!!!!!!!!!
You're the best man Olipro
Many thanks for your hard works and keep up again

Thats great
I have to gift HTC to a friend and i was so worried about the unlocking....thanks gr8 job

iPaq 614c update problems

Hi, I own a dutch HP iPaq 614c Business Navigator and I tried to update my device with the HP SP40079 Rom update file.
I used the cracked .dll to bypass the language check and the update succeeded.
(I did disable antivirus and firewall because it gave me problems with the wan radio update)
When I booted up my device again, the boot screen tells the firmware has been updated(0.88), but the OS remains the same as before the update(1.00.04).
If I start the update utility again, it shows the Wan Radio driver has been updated, but the Bootloader and the iPaq file storage haven't.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried updating it again, and again, but still nothing changed.
Anyone who knows a solution for this?
P.S. I use Windows 7 RTM x64

Problem in your OS. Try Windows XP

Thanks, that worked
Now i'm on OS 1.01.04 and FW 0.88(I'll update to 0.89 later)

hi, i'm noob here so i need your help..
I just got iPaq 614c, the language is in stupid sweden...
problem is that i can't change language to english...
I tried to update my mobile with micro SD card and flash.dio, but i got error: "update Error! Pls Check!"
os- 1.00.05
fw- 0.81
please help and sorry for my english

nobody

when you say "update" what are you updating? the FW? ROM?
If your trying to update the ROM, first run the official HP updates to update the the FW to 1.04 and 0.89 (using activsync)
then try the ROM files via sd card.

sebastiaan4489 said:
Hi, I own a dutch HP iPaq 614c Business Navigator and I tried to update my device with the HP SP40079 Rom update file.
I used the cracked .dll to bypass the language check and the update succeeded.
(I did disable antivirus and firewall because it gave me problems with the wan radio update)
When I booted up my device again, the boot screen tells the firmware has been updated(0.88), but the OS remains the same as before the update(1.00.04).
If I start the update utility again, it shows the Wan Radio driver has been updated, but the Bootloader and the iPaq file storage haven't.
I tried updating it again, and again, but still nothing changed.
Anyone who knows a solution for this?
P.S. I use Windows 7 RTM x64
Click to expand...
Click to collapse
Hi,where can I download the Ipaq Utility Update for 614c,I will be very much thankfull if u could provide me with information..thanks..

Problem with 'WP7 Update Cab Sender'

Hi all,
I have a problem with updating my phone via the update cab sender.
My HD2 is on WP7 7392 now, so I need the wp7 update cab sender and the deviceprovicioning cab. Like this, right?:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then if I run the update cab sender.bat as administrator, and choose 'S', I get this error:
And if I don't run it as administrator but as normal, I get this error (and the same when I drag 'deviceprovisioning.cab' in 'WP7 Update Cab Sender'.
(Sorry it's in Dutch)
It's without typing or clicking on something, just opening 'WP7 Update Cab Sender'.
I also reflashed WP7 because I thought that that may help but after reflashing and updating through zune to 7392, I still have the same problems.
So can please someone help me or give me a tip or something. I need the mango update because in the Nehterlands WP7 is only supported since mango, so I can't use the marketplace with NoDo.
Thanks in advance.

i'm also having same problem...
please some one help us to solve this problem.....
and thanks to "jellenl" for creating this thread with details.

I assume you are running windows 7 on your desktop pc. Dont start it as Administrator as it will cause what you allready had. Just extract the tool to your desktop and add the .cab file you want to deploy in the same directory. Make sure you are not extracting the .pks files! They may look like zip files but they are not.

I don't know why the folder "If needed install this tool" is there. Get rid of it.

whistler-nl said:
I assume you are running windows 7 on your desktop pc. Dont start it as Administrator as it will cause what you allready had. Just extract the tool to your desktop and add the .cab file you want to deploy in the same directory. Make sure you are not extracting the .pks files! They may look like zip files but they are not.
Click to expand...
Click to collapse
i try to do as your instruction....
and im little bit successful but than i got this error: (see the attach)
and another attach after rebooting both device PC and phone:

Sorry for not letting you know but I already 'solved' this problem. I tried it on 3 different computers, and I got the same error as above on the first two, and on the 3th, everything worked. So touseef maybe you can try it on another pc.

jellenl said:
Sorry for not letting you know but I already 'solved' this problem. I tried it on 3 different computers, and I got the same error as above on the first two, and on the 3th, everything worked. So touseef maybe you can try it on another pc.
Click to expand...
Click to collapse
@jellenl
I to am experiencing a similar problem as listed in my post [Q] Update Error C00D070A There's a communication error with your phone.
I have received the same error on two machines, both W7P SP1 (64bit&32bit), can you tell me what operating systems and their basic configurations were? I can make a third attempt if needed.
Thanks -Airstream

for sending CAB to phone you can also use this app:
http://forum.xda-developers.com/showthread.php?t=1315179

your phone should have the date and time as the computer has.and also,have you installed your x64 or x86 tool?
let us know if it helped at all.
also,screen always on,and zune not working

Thanks for the posts.
@dxdy
How would I use this utility to upload standard cabs (my phone has a standard rom and I have no interest in changing that), do I have to update the cabdata.xml file?
@florin_stann
My date and time is sync'd with the computer, x64 tool is insalled on 64bit machine, x86 tool installed on 32bit machine. Screen is set for 15 minutes and Zune process is terminated.
Thanks -Airstream

Problem Solved!
Taken from my thread at http://forum.xda-developers.com/showthread.php?p=22853654#post22853654
After manually backing up my data (there are automated tools you can use) I factory reset my phone and attempted an update to 7740 using the following tool http://forum.xda-developers.com/showthread.php?t=1315179 with a custom CabData.xml that I created for my phone (VZW Trophy). I updated my OS (7720) and Languages (English - United States (0409) and Spanish (0C0A), the two languages installed by the default) to 7740 successfully, and then updated OS and Languages to 8107 succesfully. After the update process I reseated my battery and factory reset the phone once again, and as expected the latest OS 7.10.8107.79 (8107) is still present on my phone.
It's important to note that I have a factory ROM and my phone already had it's firmware updated automatically (via Zune) to the levels noted in my original post. I believe the WP7 Update Cab Sender would have worked as well but preferred the slick interface wCabSender provided, thanks guys!
No thanks Verizon and HTC, a BIG Thanks to all at xda-developers!