I try to flash my cruise to the custom to 6.1
But when i start the pda turn to the load screen, and nothing happen follow this screen. Then, the pc will show the error of the connection.
My cruise will still hold, after I softreset the moible. norrmal, but i can't flash the rom. May anyone help. Thx
Also, I would like to have the offical rom of the big5 wm6.0 ver. Anyone can post.
Many thanks.
hi, make sure activesync is running.
http://forum.xda-developers.com/showthread.php?t=381600
Hi Dude...
did you install oli's hard SPL? (or any other hard spl for polaris?)
have a gr8 day
Itay
ok, let me try the hard SLP first.
Thanks a lot.
Related
Dear all
i just have regitered over here after i tried alot with shop's over here to change the language of my T mobile MDA from GER to ENG
i searched all the forum to find out where i can get ENG ROM and the correct way to falsh it with USB cable ... am not expert to flash it in bootloader mode
Can any one help me please out here ?
Thanks in advance for all
http://lumpistefan.dyndns.org/ - all versions, languages + couple of nice progs that can be optionally included straight in ROM - make your RAM free! :lol:
Thanks alot bob190cm but am looking for the orginal latest version for my PDA
Thanks man for your effort
tmobile's uk site would prob be a good place to start looking
2 sunpower:
Actually, if you unmark "Add software and modify ROM" option, you get the original ROM - 4.01.16 ENG is the official T-Mobile release of WM2003...
Man i downloaded the 2003 ROM and tries to upgrade my PDA but it killed it ... ActviSyn does not recognize it any more
what do i have to do now do i have to try the bootloader way ?
if yes what do i need to do it and how ?
Have a look around that forum.
Now I can tell you this: activesync will not recognize it - simply try running the update again. If doesn't help - see forum for exact instructions how to run the SD update.
PS: what actually happened?
I made a 2003 rom for my XDA I T mobile device i tried to upgraded it but it hangs up and a mseege appared asking me to soft rest my device and try the operation again ... now ActiveSyn not connecting to the device and i dont have an SD my Bootloader is 5.25 is this loader is bad ?
Please advice.
Thanks
i forgot to ask you what is soft reset and hard reset ?
sunpower said:
i forgot to ask you what is soft reset and hard reset ?
Click to expand...
Click to collapse
A softreset is a restart of your device. You do it by putting your stick in the little hole down on the left side.
A hardreset performs a blank installation of the System stored in your Rom. All applications an data installed will be lost. You can do this by unsrewing your stick, putting the top in the little hole down on the right side, wait for about 60 sek. and do this again....
HTH
Stefan
You guys are wonderfull :lol: i got my XDA back by bootloader method .....
please help! I have made a wrong ROM Update for my Artemis. The result is that it doeasn`t starts anymore. I see only the start screen no more. If i make a SW or HW reset tahn i see a 3 colored screen and USB. But i don`t get a connection via usb to my compute`! How can i wake up my Artemis ???
tell use more what did you do and how did you do it?
what artemis is it?
what rom was it
Flash went sour..
You need the original ROM which was on your device when you bought it. What version (HTC, MDA, etc..) and what language was the original ROM?
please i need help too
I guess I made the same or a similar mistake that dr.moppi did. My machine is a Dopod P800 from mainland china with the chinese operating system. I flahsed it with PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap. Don't really remember what the original ROM was but now when i turn it on it freezes when it lights up. On the screen, it says
IPL 1.27.0001
SPL 1.27.0000
GSM 02.67.90
OS 1.28.0.0
DOPOD
I don't get a connection through usb to the computer either. I am not sure if I did the hard reset correctly. Didn't understand the instruction on that "press the soft key left and right and soft reset at the same time." Anyway, you guys are all experts, can you help me please?
it should be the same as my problem
if i remeber than i used the same ROM Update :-(
I hope anyone could give us a solution, please.
@dr. moppi we can only help you if we know what version you had before.
@empathyvirus you have to look for the original ROM which, in your case, should be the Chinese Dopod ROM. Install that one and your good to go.
Without the original ROM the only thing left to do is: sending your device to your provider or contact and sent it to the guys of imei-check. Either way, you'll probably have to pay to get it fixed.
how to install original rom
Thanks for your quick reply Pyth. In the case I get the original ROM from somewhere, how do I install it if I can't get a connection between the phone and my computer? Can you advice?
Put your device in bootloader by pressing the record button and reset at the same time. If you have your USB-cable connected between your PC and your phone it will indicate a connection by 'USB' in the left corner of your device. Now you should be able to run the ROM executable and update your device.
thanks anyway
i tried but it didn't seem to work. anyway, i have troubled you enough and maybe it's best i just go to the repair centre of dopod and pay for a fix. i really appreciate your help though Pyth.
Where can i find the t-mobile rom its the MDA Compact III that wont start for me
I have serious problem with my PDA SPV M2000 after upgrade to WM6. After upgrade i try to restart my PDA with Hard Reset, but can see only 4 collored screen. I can acess only bootloader mode and nothing else... PLEASE HELP
reflash
Did you try a reflash?
I try all the steps 5 times but nothing. I try use WM6 from helmi and xpode. With the same resolution. Now i try to downgrade to WM2003...
I am back on WM2003. Thanx god
I got a gray screen whith serial v 2.07... and few pages i find dosent help me att all..... please help me some one....
brb66 said:
I got a gray screen whith serial v 2.07... and few pages i find dosent help me att all..... please help me some one....
Click to expand...
Click to collapse
the grey screen with serial v 2.07 is the bootloader mode...
maybe a reflash will do the trick...
how did you screw up the upgrading process? did you accidentally unpluged the cable? is it a corrupted file?
I have never experienced this, but, if i were you, I would reflash it. if nothing good come up,then maybe the file you are using to upgrade is corrupted...
hope this helps, and maybe the experts would have more ideas cause i am just a user.....
I've upgrade to WM6.0 pdaviet, but can't use GSM network : no services...
Any body help me plz...
fix it now, pdaviet'rom works well with 1.15.00 radio .
sorry for my English
Ibhave a tmobil MDA amd i did an upgrade to windows mobile 6 and now my MDA is slow in most of the programs also the SMS when inserting any messages the words do not show after at least 10 sec.
Please, definelly need help.
navarde
Have you performed HARD RESET?
What ROM did you use for flashing?
(also some installed programs may slow down your device a lot!)
I had the same problem. From time to time whem im flashing my phone its happening. After few soft resets it'll be ok.
Hello guys been lurking for a while with my X1 and decided i would give this touch it a go!
downloaded from megaupload and connected to active sync via usb cable, started the rom updater and it stuck at 0% then i recieved error 262 i think!
i tried it 6 times last night rebooted both phone and computer but cant get around it!
wondering if anyone could help me with it?
i am using xp media center!
thanks
chris
anyone please?
Did you hardSPL first?
May I point you in the direction of HardSPL...
http://forum.xda-developers.com/showthread.php?t=431218
The ROM update fails because it isn't digitally signed by SonyEricsson. HardSPL bypasses this requirement allowing you to use custom ROMs.
Install HardSPL
Install custom ROM
Result!
thanks guys i am reading the post the now!
i did however install manilla tf3d yesterday because i couldnt get on net to check replies and i was bored but i have a problem there too if i could point you to http://forum.xda-developers.com/showthread.php?t=500422
thanks again guys!
ZenithUK said:
May I point you in the direction of HardSPL...
http://forum.xda-developers.com/showthread.php?t=431218
The ROM update fails because it isn't digitally signed by SonyEricsson. HardSPL bypasses this requirement allowing you to use custom ROMs.
Install HardSPL
Install custom ROM
Result!
Click to expand...
Click to collapse
done the hard_spl and still same error 262!!
first of all, throw away the 4.5 version! (to many bugs in the rom)
go to http://forum.xda-developers.com/showthread.php?t=498019
and get the 5.04 version, it's faster and better
quick and easy...check to see if you have actually hardSPL'ed first
(Hold down the down volume and start key (Together) and let it boot up (Do not let go))
You should see:
KOVS110
SPL-0.72.OliNex
MicroP1-787
MicroP2-707
If you don't you don't you haven't hardSPL'ed)
To make sure you don't get an error 262 turn off your Wireless/Internet connection.
Turn of your anti-virus
Turn of your Firewall
Then HardSPL
After your done restart firewall/virus/internet
Use the SDCard method to flash your rom: http://forum.xda-developers.com/showthread.php?t=445662
Hopefully that should work
THJahar said:
quick and easy...check to see if you have actually hardSPL'ed first
(Hold down the down volume and start key (Together) and let it boot up (Do not let go))
You should see:
KOVS110
SPL-0.72.OliNex
MicroP1-787
MicroP2-707
If you don't you don't you haven't hardSPL'ed)
To make sure you don't get an error 262 turn off your Wireless/Internet connection.
Turn of your anti-virus
Turn of your Firewall
Then HardSPL
After your done restart firewall/virus/internet
Use the SDCard method to flash your rom: http://forum.xda-developers.com/showthread.php?t=445662
Hopefully that should work
Click to expand...
Click to collapse
yip done that it hard spl correctly i am using the 5.04 version now and it didnt work earlier am gonna give the sd version a go!
Hi,
I've got a real urgent problem to solve. With one HTC X7500, i installed SPL 1.2...but as a stupid boy, i also installed ATHENA ROM AV.1.20.1. for SPL 3.5!! So now, the mobile doesn't start and stay on a very strange screen...but never run under WM...
I try all (using mmty...usb not recognized)...I try to flash with Athena updater... problem of connexion...NOthing is working.
The only thing i can do is to make a reset and go in the manual bootloader...but after, nothing is possible!!!
Please, help me, i need this material for my job!!!!
Thank u
If you can get into bootloader (the 3 colour screen) post what is written there
if it is definitely spl 1.2 you should be able to load an SPL 1.2 rom from this screen.