[Q] Urgent problem - Advantage X7500, MDA Ameo General

Hi,
I've got a real urgent problem to solve. With one HTC X7500, i installed SPL 1.2...but as a stupid boy, i also installed ATHENA ROM AV.1.20.1. for SPL 3.5!! So now, the mobile doesn't start and stay on a very strange screen...but never run under WM...
I try all (using mmty...usb not recognized)...I try to flash with Athena updater... problem of connexion...NOthing is working.
The only thing i can do is to make a reset and go in the manual bootloader...but after, nothing is possible!!!
Please, help me, i need this material for my job!!!!
Thank u

If you can get into bootloader (the 3 colour screen) post what is written there
if it is definitely spl 1.2 you should be able to load an SPL 1.2 rom from this screen.

Related

help the wizard is dead after upgrading to new rom

hi all ..
I did flash my HTC wizard with new rom after finishing the install the device reboot and stacked on the boot screen then I tried to go to the boot screen but I couldn't , I tried to make hard rest but also I coudn't nothing is working even charing the device cant be made .
bye bye
Are you able to get to a multi-colored screen with numbers?
In case you don't know, to get to the bootloader screen hold down the camera button and press the power button.
now i got the same problem.
I updated the rom & now i have the multi-colored (red/green/blue/white) screen
with RUU - IPL 2.18 - SPL 2.18 - USB on it (Qtek 9100)
I downloaded the tools from Vippie in the thread "How to flash a new ROM to your Wizard... a little tutorial!" but those won't help...
anybody got any advice? I would like to install WM6...
thanks in advance!

how to put p3600 original - help please!

hi..
I installed a cooked rom.. but my p3600 has some problems and i have to send it to the brand. I have to install the original wm5 that i already have, but I don't know if the hard spl is automatically removed, or how to put it as it came originally to send it to the brand.
i dont have a lot of experience with this.. if anyone can help me please!
thanks
PlasticFX said:
hi..
I installed a cooked rom.. but my p3600 has some problems and i have to send it to the brand. I have to install the original wm5 that i already have, but I don't know if the hard spl is automatically removed, or how to put it as it came originally to send it to the brand.
i dont have a lot of experience with this.. if anyone can help me please!
thanks
Click to expand...
Click to collapse
You need to Cid unlock your mobile to flash with **** Roms
http://forum.xda-developers.com/showthread.php?t=293957
but i have flashed with cooked rooms.. and i want to put original to send to HTC because my pda have some problems.
its only need update with original rom? must remove hard spl (olipo v1.30) ?
and how?!
i don't think you can ... as your boot screen always shows even if you flashed FULL ROM from original (include SPL, radio, rom....)
when i press cam, power and reset button, i got this:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
(no more hard-spl 1.20 i think) is this ok ?
when i power on normaly, it shows the white screen "HTC" and some numbers and radio version.
Then the screen without the numbers and goes to WM5 that I updated from the file HTC P3600_RUU_Trinity_HTC_PTG_1.23.4...blabla.....
i think my p3600 is original ? and can i sent to the manufacturer now ?
(because my screen, somethimes have some lines and i must reboot, and then, sometimes the screens stills black..) :/

Herald Doesn't start after a bad flash

Hi everybody,
I went to a store this evening in order to unlock my Polaris. The owner of the store has got a HTC herald with a problem that he wanted me to solve.
He tried to install another rom on his herald but, due to an unsuccessfull rom upgrading, the HTC is locked on a RGB screen (red green blue) with the only following indications:
RUU
IPL 1.08.0001
SPL 1.08.0001
USB (or nothing when not plugged)
Would you mind helping me? I tried several Roms, and there was only one that seemed to work (ROM HERALD_ smiley sWWE.gif _6.1.405.13_BUILD 20764.1.4.3): It gave me a progress bar on the HTC frozen at 0% while the upgrading tool on the pc told me that I needed a more recent upgrading tool.
What can I do?
Thanks for all the solutions you'll give me
Nounou7701
(sorry for my bad english, I'm only a 15 years old french guy, wich explains that way of speaking english)
Before installing cooked ROMs I believe the phone must be HardSPL'ed, and this can only be done if the SPL/IPL is 4 or above - any lower/not HardSPL'ed and the device will be bricked. The screen you are describing is the bootloader, and since you only have an IPL/SPL of 1.x I'm pretty sure you can't install custom ROMs. To unbrick the device, turn it onto the bootloader and then load the original HTC ROM that came with the device.
Hope this helps,
czhang
Dear Czhang,
I tried several times to enter in bootloader, but it's impossible as it starts with the bootloader menu! I can't change anything about that, even by soft resets, reset+camera, reset+buttons...
Do ya think this could work properly? http://forum.xda-developers.com/showthread.php?t=417930
As I am stucked with 1.08.0001 SPL, There is nothing to do. All the users who tried to unbrick their phone didn't got it working, except one who changed the motherboard for... 200$ ! The price of a used HTC Herald in very good conditions!
Still looking for help
Thanks
Nounou7701
sorry to say sir but your ipl and spl should have been 4.0 or higher and also HardSPL'ed. i'm pretty sure your device is bricked. GL on finding a way to fix it or buying a new one. =D
Nounou7701, though you cannot flash a cooked ROM with IPL/SPL 1.x you can definitely flash the official ROM from HTC.
AAAARRRGGHHH! thanks to everyone for the (bad ) news... I'll try to buy a mothercard, just like another user did...
Have a nice evening
Nounou7701
nounou7701 said:
Hi everybody,
I went to a store this evening in order to unlock my Polaris. The owner of the store has got a HTC herald with a problem that he wanted me to solve.
He tried to install another rom on his herald but, due to an unsuccessfull rom upgrading, the HTC is locked on a RGB screen (red green blue) with the only following indications:
RUU
IPL 1.08.0001
SPL 1.08.0001
USB (or nothing when not plugged)
Would you mind helping me? I tried several Roms, and there was only one that seemed to work (ROM HERALD_ smiley sWWE.gif _6.1.405.13_BUILD 20764.1.4.3): It gave me a progress bar on the HTC frozen at 0% while the upgrading tool on the pc told me that I needed a more recent upgrading tool.
What can I do?
Thanks for all the solutions you'll give me
Nounou7701
(sorry for my bad english, I'm only a 15 years old french guy, wich explains that way of speaking english)
Click to expand...
Click to collapse
He didn't head the warning of the SPL requirements. You can easily revive it using the GoldCard method. (Search for the term "goldcard herald".)
HTC P4350 do not switch on after a bad SPL
I've tried to flash my Hera 100 P4350 with HardSPL Herald, but I got an error message it has switched off and I can't get my mobile switched on again.
It looks like completly dead (kaput).
Can anyone help me ? Or explain why that happened ?
TIA,
dark_side61
HTC P4350 do not switch on after a bad SPL
After a total reset (left soft touch + right soft touch + reset) I got the
IPL 1.08.0001
SPL 1.08.0001 screen but with no USB on the lower left corner of the screen
After arrived here what shoul I do to reinstall my P4350 ?
What do I need to have ?
TIA
dark_side
Do what Ivan said!
Search for Goldcard to fix it....

Desperate Help needed upgrading 8125!!!

First of all I am so sorry to bother you all!!!, as I can see from 3 days of non stop reading here and e;sewhere, its not always liked to ask questions, but I am sorry I really need help!
I bought a 8125 cingular from eBay (bought a x01ht but it hasnt arrived)
I have read seriously so much I am now confused! But I have tried to research this 100%
when I got the phone yesterday, I first sim unlocked it with the "All HTC" unlocker.. then I used unlock ext rom wizard, and Likiwiz02 for the cid.. I did see it say "your phone is superCID" unlocked or what ever...
I then tried to flash with x2h_wm 6.5 and it went through the steps like it should and finished and said your rom is updated, BUT when the phone rebooted, it was like it went DOWN not up.. I lost alot of things and now it said G not E for network, I had less signal, and had the roaming Icon. Well, after that My XP computer would no longer recognize the device.. I would plug it in and it would charge, and the active sync tries to connect but after a few minutes it says it can not connect.
I am able to "sometimes" connect top my Vista" device, BUT I have not yet mastered being able to flash a rom with Vista... as I always get RUU is closing, because of error.. and it leaves my phone in bootloader RUU mode, so i have to reset it. I have tried the instructions here http://forum.xda-developers.com/showthread.php?t=291723 and One time I was able to get pretty far without an errors from RUU, but it said I needed a newer version.. or something, and after that I am unable to do it do any RUU on vista, although most of the time I can get it to connect by going to the services- and restarting wm 2003 thing"
This is the details of my device (and yes I know is a G3)
IPL & SPL :2.25
gsn: 02.25.11
os: 2.25.11.1
Ext Rom: 2.25.11.102
Radio: 02.25.11
Rom 2.25.11.1 WWE (build 14928.2.2.0)
protocol ver: 4.1.13.12
My question is.. What am I doing wrong? How can I get either XP to connect, or Vista to run RUU?
Can I flash by sd card.. ( I have seen both yes and no, and am confused on how to do it)
Tweeks I have done is installed a cab to remove roaming icon, reg. changed the G to E for Edge... Speed it up bu changing mem. and I think that's pretty much it!
Scream at me and call me stupid, BUT Please help me.. There are 10000000000000 different HOW TO all over the place, and all are different, and I really just would like a little PERSONAL help from someone..
THANK YOU SO MUCH!!!!!!
Tony
Also.. On the Activesync issue.. I have uninstalled and delete all tracers on my xp laptop and reinstalled both the newest version , and when it did the same, I uninstalled and reinstalled an older version... Still the same!
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
best thing is to start with reading the wiki
Read it over and over...
I am not just saying it when I say I have searched and searched!
UPDATE
Although I received no answers, I thought I would upddate... I am so embarrassed, as the active sync was an easy fix.. (disable Firewall) I cannot believe it is that simple, as it was working fine before with firewall..
Ok I am following the instructions now flashing with XP button rom, etc etc.. Will follow up later!
Ok progress!
Well, I was able to flash to phone to button rom, and then CID unlock it with lokiwiz, but My IPL and SPL are different. SO i flashed button rom again, and its still the same... Can I go ahead and flash back up, or what do I need to do?
IPL 1.01
SPL 2.25
tlbaker78 said:
Well, I was able to flash to phone to button rom, and then CID unlock it with lokiwiz, but My IPL and SPL are different. SO i flashed button rom again, and its still the same... Can I go ahead and flash back up, or what do I need to do?
IPL 1.01
SPL 2.25
Click to expand...
Click to collapse
If all was successful your good to go.
And yes you can flash back up.
I am so ANGRY... I got to 100 % and my cat hit the cable and Now its stuck in RUU... I am looking for a fix.. ANY HELP PLEASE?
OK... got it going again... flashing back down to button, the only one that would connect.. and I will build my way back up...
Sorry for posting so much.. and thanks for the help!
I have flashed to T mobile 2.26.10.2 , IPL/SDL are both 3.08 And I have tried several times to go beyond WM5.0 but It never loads.. Any advice...
Thanks
Connect the phone to the PC and run Wizard Service Tool and press Enab. RAPI + Unsigned Apps button.
Then press CID Actions Button and Read CID block, this will tell you if your CID unlocked.
Well, I will try that, BUT I am assuming since I have a Tmobile ROM on a ATT phone its no longer unlocked???
When I ran the unlocker it said it was now SuperCID unlocked or whatever..
I will do the Service tools and see.. and Post back soon! THANKS
It is locked!
OK.. I ran the tools and it said it was CID locked... this was the results (not sure if usefull or not)
Checksum : fb67d2a2
CID: WIZCNG01
Its funny because when I ran the other lokiwiz it said it was unlocked..
I tried to unlock it and it said downgrade SPL to 1.06 or less.. AND thats the problem... When I Loaded Button rom the 4 different times I have had to flash it.. THE SPL never changes down.. One time I flashed it, I repeated it 3 times as per some instructions i seen that if you flash it again it will change.. NOPE did not change, the IPL always changes, BUT SPL stays the same.. SO If I flash again, this is the results SPL 3.08 IPL 1.01
Can anyone help me .. maybe use a diffrent rom instead of button?
HELP PLEASE!
THANKS
Have you tried to go back to the original ROM?
Problem solved
I am still tinkering, and adding patches now... BUT I was able to get wm6.5 (VERY SLOW ON MY WIZARD) so I went back to button rom, and installed XDA Mobile 6 Release 5 ROM, and I LOVE IT!!! like I said I am still adding stuff and playing with it, but so far its better than WM6 I have on my Cheetah (treo750)...
I will add the steps I took , and trial and error steps, so other people that are impatient and ask questions like I did, will know what to do.,.. BUT let me play with my new toy for a while!!!
One question.. Should I stay with IPL/SPL 2.26? Or should I go back up to 3.08 or ?????
Thanks

Urgent help: HTS P3300 stuck up

Dear All,
Please urgent help required.
my HTC P3300 (Artemis) stuck up when i was trying to start it up. when i use to turn my cell on, i goes to the starting screen shows the following numbers and then stuck up.
IPL 3.07.0001
SPL 3.07.0000
GSM 02.69.90
OS 3.7.0.0
the screen does not move after that. i tried soft reset through the reset button but result is the same.
i also tried hard reset and when i puch the green phone button to proceed, a message come "FORMAT FAILED" and the phone stucks up.
i am quite a lot of problems since i have upgraded to WM6 from WM5 last week.
i am quite sucked with this problem. not been able to use my set since yesterday.
please also note that my HTC was not syncing with my PC since i have upgraded to WM6.
PLEASE HELP URGENTLY.
Nomi
You must upgrade :
-Remove SD-Card
-Remove Sim-Card
-USPL
-Upgrade new ROM
thank. i got through to install wm 6.1.
can any one please tell me which is the most stable ROM for 6.1 or 6.5
which one is better for my HTC artemis.
please post link to the ROMs
I'm using two roms :
Shady313-23081R1 : http://forum.xda-developers.com/showthread.php?t=546805
dheewatara-s 23075B1 : http://www.pdamobiz.com/forum/forum_posts.asp?TID=255901&PN=1
same problem..pls help
i have same rom and ratio with u nomi...but my problem still occur...
where do u get the USPL eventually?

Categories

Resources