Related
Greets gang,
Several days ago I started getting the subject message appearing in my WinXP system tray. It was on my Gateway laptop and it would appear over and over again, citing 'Unknown Device' when you'd click the annoying ballon. My Jam wasn't even connected at the time.
I basically blew everything away and restored my laptop to factory original settings. Problem persisted. I thought it might be hardware, but the message has now disappeared, only re-appearing when I plug in my Jam. My USB Bluetooth dongle plugs in fine, no errors.
Someone else had bent pins on their USB port or plug--I see none. Anyone else have issues with this, or can anyone offer some help?
Presumably you have installed (re-installed) Active Sync on the PC? As you may already know, as standard the JAM and many other PPCs are not recognised by the computer unless Active Sync is installed [properly].
www.softick.com provide an excellent utility to have your PPC recognise as a removable drive without using Active Sync.
Yes, ActiveSync has been installed & re-installed. New development? I plugged in an 80Gb external hard-drive to that laptop and Winblows is telling me its connected to a non-hi-speed USB port, which it is not. Could be something there.
I'm going to re-flash the Jam to factory ROM, then I will dig into the USB issue.
I had this problem and I tracked it down to the fact that I had picked up the wrong cable!
Same connector but for my camera
The wrong cable thing may very well have been it, but I was also having probs with an external hard drive I was using. I ended up rebuilding my laptop twice and now things seem to be fine. What a drag.
hypr said:
Greets gang,
Several days ago I started getting the subject message appearing in my WinXP system tray. It was on my Gateway laptop and it would appear over and over again, citing 'Unknown Device' when you'd click the annoying ballon. My Jam wasn't even connected at the time.
I basically blew everything away and restored my laptop to factory original settings. Problem persisted. I thought it might be hardware, but the message has now disappeared, only re-appearing when I plug in my Jam. My USB Bluetooth dongle plugs in fine, no errors.
Someone else had bent pins on their USB port or plug--I see none. Anyone else have issues with this, or can anyone offer some help?
Click to expand...
Click to collapse
I have the same problem.
It seems, this problem appears mostly on laptops, not on PCs?
I tried to uninstall\install, repair with all ActiveSync data removal or leaving it - No result.
Also, tried to replace the cable (which is ok, im sure with the one from the camera) - No result.
Temporary way out: do Off\On with qtek9000 on cable connect.
Another way out: Turn On the "Enable all incoming beams" flag in Start -> Settings -> Connections -> Beam (this path may vary depend on your Universal brand name). As I seldom need to connect via IR to other devices, I have switched this option off to consume power.
DOES ANY BODY KNOW, HOW TO FIX THIS BUG?? Any Ideas?
Qtek9000 with laptop Toshiba Satellite Pro \ Win XP SP2
it seems dat a noob like me at last can give a help
i have the same problem last time, and as i trace it down, the problem lies on the cable.
as u know that we all use mini usb (usb cable type b) for our o2 mini, but not all type b cable support pc connection, some will only give charging access
i have 2 mini usb cables, one comes from my external hdd, and the other is i buy it myself. the difference is that the 1 i bought actually have a shorter connector (maybe the problem due to this)
so try to buy another cable, as i don't know any other way (reinsatalling pc os, hard-reset device or reinstalling active sync won't solve the problem)
NB. both cables are working when i plug it to my external hdd, so maybe the cable is not faulty. one of the advantage that i got is that i can charge my mini without disabling the active sync usb connection
sorry for my bad english
i can almost essentially confirm that it is NOT the usb cable.. I have been using a usb cable i had around the house for syncing my phone, and it has worked perfectly ever since I first received the phone (over half a year ago), but all of a sudden, i plugged in my device, and received the "usb device not recognized" error message... does anyone know the cause of this?
Hello all,
I have just bought the Jasjar on ebay, after months of hoping and dreaming!
The unit works fine, but the twit who sold it to me has 'lost' the original CD and manual, leaving me with no way of:
Syncing to my computer (tried it, but XP demands the install software)
Working out how to use the phone element (such as sending text messages).
Generous souls that they are at clubimate, they want to charge me $60 for this information!
I was wondering if someone might be able to send me a copy of the files / a torrent of the disk, so that i can at least install it on my home computer and read the .pdf manual.
Much appreciation in advance!
Stephen
active sync can be found on the ftp
ftp://xda:[email protected]/Universal/Tools_Programs/active_sync_4.1.zip
manuals can also be found on the ftp
ftp://xda:[email protected]/Universal/Original_German_and_Englsh_Manuals_etc/
have fun with it
Many thanks.
Is this ftp to the activesync the one that the computer will install so that it recognises the Jasjar? I downloaded activesync to my pc, but when I connected up my jasjar, my computer wouldn't recognise it, because the 'Install new hardware' utility had not completed!
Aha! The ftp part of this site appears to be the possible solution to my problems. When I connect my jasjar to the pc, which software file would I direct the 'hardware installer' to though?
Many thanks for your help so far!
there shouldnt be a ´hawdware installer´... active sync should recognise the jasjar without problems...
do u have it connected directly to the pc or to a usb-hub? try doing it directly
I was using activesync 3.8 from the windows website. Could that have an effect?
When plugged it, the bubble pops up, saying Device recognised: POCKET PC USB SYNC, and then the Hardware install dialog box comes up.
I will try with the latest version of Activesync, and see what difference it makes.
Wm5 (which is on your universal) only works with AS 4.0 or higher. Check the ftp for that or download directly from MS. I recommend AS 4.1, since it is much more stable than 4.0.
ActiveSync 4.0 doesnt work with aku2 roms if i remember correctly so try 4.1 (link can be found in my 1st post in this topic)
Okay, I downloaded and installed Activesync, and it will still not recognise my JJ, saying it cannot be found. At the same time, the computer says 'USB Device not recognised'. Argh!
Does anyone have a solution to this problem?
My XDA Exec has just been replaced by O2, but my PC reports the 'USB Device not recognised' error. I suspected the new phone but I plugged it into my laptop and that works fine.
Im pulling my hair out here, its very frustrating. I have installed 4.2, uninstalled, tried 4.1, no luck.
I tried connecting with the phone switched off, no difference. Tried after both PC and phone rebooted, no luck.
There must be something in the Windows USB settings that has gotten screwed up, but I don't know enough of that area to feel brave enough to tamper with it.
Any ideas guys?
Thanks
Nasdaq
Ah, I have a solution to my problem!
After many reinstalls of different versions, I had a brainwave, why not try syncing when no other USB devices are attached! Hey presto! It works!! :lol:
I found that my USB Skype phone was conflicting somehow, so unplugging that works fine. I'll sort the USB phone out later, being able to sync is much more important atm.
Cheers
Nasdaq
does anyone else have the problem where activesync automatically disconnects? Ive installed activesync 4.2 and also tried 4.5 but still disconnects, anyone here know how to remedy this terrible problem?
yustheman said:
does anyone else have the problem where activesync automatically disconnects? Ive installed activesync 4.2 and also tried 4.5 but still disconnects, anyone here know how to remedy this terrible problem?
Click to expand...
Click to collapse
It's not completly gone, but it got better when I connected my Trinity directly to an USB-Port and not over an USB-Hub.
Bye, Peter
cheers, for that peter, but i have only ever used it in the motherboard usbs ive changed usb ports, my axim x50v doesnt have the problem?
what could it be??
Hi!
I'm new to Universal, but I'm getting along with most of the features.
The only problem is: I cannot sync using WM6.
The problem:
I plug the USB in, the PDA connects, Activesync (on PC) starts and setting up itself... and stuck! When I check the AS on my Universal, it says:
"To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC:"
And then something about Exchange Sync.
The connection is OK, the device gets IP, and so on.
I installed the original (4.1) AS, but (no surprise) it cannot sync with WM6.
Must I revert to WM5? I don't want to...
Anyone any sollution?
Install Version 4.5 of ActiveSync! Only this one is able to sync with WM6!
Look here!
Sorry, I didn't emphasize that I have AS 4.5 installed.
This way goes the message like I wrote.
So thank you for your reply, but sadly, this is not the sollution.
(I installed/uninstalled AS several times in the last two days... But for WM6 4.1 isn't good, for 4.5 it says use the GS Disc... The only way out (as I think) is to go back to WM5 to use 4.1... But that way I will miss some new stuff from Crossbow.)
Almost solved
Hope somebody still reading or finding this topic.
What I discovered that the error message mentioned was not because of the wrong ActiveSync version. It was because the AS on the PDA cannot communicate with the AS on PC. I explain. I flashed WM5 back and installed AS 4.1, but the error message was still there. But the text went like "install ActiveSync on PC..." So it connects, gets IP, but cannot see that AS is installed. And the sollution?
Bluetooth sync
Yeah, AS over BT works. Connects, syncs without problem. I think I'll have to stick to that option.
Why doesn't it work over USB?
Switched the cable -> still no luck. Tried WM5torage with USB -> it works!
So it looks like it's a software problem, just a rare case (?). I'll work with the troubleshooter later, until than: BT.
Good day to all.
homa said:
Hope somebody still reading or finding this topic.
What I discovered that the error message mentioned was not because of the wrong ActiveSync version. It was because the AS on the PDA cannot communicate with the AS on PC. I explain. I flashed WM5 back and installed AS 4.1, but the error message was still there. But the text went like "install ActiveSync on PC..." So it connects, gets IP, but cannot see that AS is installed. And the sollution?
Bluetooth sync
Yeah, AS over BT works. Connects, syncs without problem. I think I'll have to stick to that option.
Why doesn't it work over USB?
Switched the cable -> still no luck. Tried WM5torage with USB -> it works!
So it looks like it's a software problem, just a rare case (?). I'll work with the troubleshooter later, until than: BT.
Good day to all.
Click to expand...
Click to collapse
in your first post you said you cannot sync at all using wm6... and then in the next post you said you can sync using bluetooth... seems like you already found the solution to your problem... use BT...
just a thought though... if BT sync is really working and usb is not.... then there's a problem with your cord... otherwise, its the software.... its either activesync version... or a firewall is blocking a port that prevents the sync during usb connection
Thanks for reply.
I tried swithing the cable (so use another miniUSB) but that's not a problem. And WM5torage works, so...
Firewall could be wrong, but I don't have problems with other PDAs, so I think it is other software...
Anyway, yes, the sollution for me is BT. I use it since than, but until I realised that only USB is not working... I spent days with this, just because before the first succesful sync, AS only tells you: "use the AS from the CD..."
It should say: "Connected, but cannot sync. The problem COULD BE wrong AS version..."
So yeah, BT rox...
2 days ago I lost my active sync it just doesn't work, I connect my device to my pc and i doesn't even light the screen though it does charge :S... I've tried everything possible: Hard reset, Task29, flashed a few rooms (throught bootscreen and SD card) tried in a different PC but nothing seem to work. My X1 does do active sync in the same PC. I don't know what else to do... has anyone got a clue of what to do?... Thanks.
Maybe stupid but, have you tried other USB ports?
Sent from my HTC HD2 using XDA App
wazaaappp said:
2 days ago I lost my active sync it just doesn't work, I connect my device to my pc and i doesn't even light the screen though it does charge :S... I've tried everything possible: Hard reset, Task29, flashed a few rooms (throught bootscreen and SD card) tried in a different PC but nothing seem to work. My X1 does do active sync in the same PC. I don't know what else to do... has anyone got a clue of what to do?... Thanks.
Click to expand...
Click to collapse
Try removing and reinstalling activesync and make sure you do a reboot inbetween. I had this problem once and a hard reset fixed it but that was only because the problem i had was phone side (server side) and not with the pc (client side)
As I said I tried in another PC and it didn't work either, but my Xperia X1 does work so the usb port is all right... Forgot to mention that on NRGZ roms sense looks quite messy now even on the roms I know are workin properly, and everytime I reebot the mob the navipanel pops out, now I change to another ROM and the sense seems ok but the home button pops out the navipanel. Its so strange :S:S!
wazaaappp said:
As I said I tried in another PC and it didn't work either, but my Xperia X1 does work so the usb port is all right... Forgot to mention that on NRGZ roms sense looks quite messy now even on the roms I know are workin properly, and everytime I reebot the mob the navipanel pops out, now I change to another ROM and the sense seems ok but the home button pops out the navipanel. Its so strange :S:S!
Click to expand...
Click to collapse
In that case i can't help with the activesync issue but the navipanel issue is solved by disabling the auto detection. It is possible that the two are linked but i had the navipanel problem with the most recent energy rom and implemented the fix and all is well
M3PH said:
In that case i can't help with the activesync issue but the navipanel issue is solved by disabling the auto detection. It is possible that the two are linked but i had the navipanel problem with the most recent energy rom and implemented the fix and all is well
Click to expand...
Click to collapse
so how do I disable that? and whr is the fix? cheers.
Still waiting for answers about the Active sync...
Thanks.
wazaaappp said:
so how do I disable that? and whr is the fix? cheers.
Still waiting for answers about the Active sync...
Thanks.
Click to expand...
Click to collapse
Have you disable the "Enable faster data synchronization" thing?
Mine only syncs that way... It stopped syncing with faster sync some time ago...
wazaaappp said:
2 days ago I lost my active sync it just doesn't work, I connect my device to my pc and i doesn't even light the screen though it does charge :S... I've tried everything possible: Hard reset, Task29, flashed a few rooms (throught bootscreen and SD card) tried in a different PC but nothing seem to work. My X1 does do active sync in the same PC. I don't know what else to do... has anyone got a clue of what to do?... Thanks.
Click to expand...
Click to collapse
Hi, I have had same problem... spent around 2 days on Google and found a likely cause for that... Is there any chance that you phone got wet or short circuit a mini USB port... Anyways, have a look this forum and my post at the end...
http://forum.xda-developers.com/showthread.php?p=8382137
Hope it helps
when my ActiveSync stops working, the thing that usually help is "reinitiating" the connection - you could try step described here
p107r0 said:
when my ActiveSync stops working, the thing that usually help is "reinitiating" the connection - you could try step described here
Click to expand...
Click to collapse
Thanks for trying to help, this page is very helpful when device is recognized by PC, but has ActiveSync profile mismatch. The first thing that I did is I've disabled fast sync on HD2, then I've deleted all profiles and their traces on PC and HD2 as well. Usually it helps when you plug in the phone, computer acknowledges it, but pop in warning sign that USB device is not recognized or recognizes it but fails to initiate ActiveSync. In my case there was no reaction (on multiple computers) - like nothing is plugged in... Will see what repairer says... I'll post an update as soon as I'll hear from them.
Grisha24 said:
Thanks for trying to help, this page is very helpful when device is recognized by PC, but has ActiveSync profile mismatch. The first thing that I did is I've disabled fast sync on HD2, then I've deleted all profiles and their traces on PC and HD2 as well. Usually it helps when you plug in the phone, computer acknowledges it, but pop in warning sign that USB device is not recognized or recognizes it but fails to initiate ActiveSync. In my case there was no reaction (on multiple computers) - like nothing is plugged in... Will see what repairer says... I'll post an update as soon as I'll hear from them.
Click to expand...
Click to collapse
Yeah I have the same problem any PC just doesn't recognize the usb connection.
The link above covers what I'd try next in a round and about way.
Can you connect to your PC by cable in disk drive mode (>>Settings>>Other>>USB to PC)? Can you connect ActiveSync via BlueTooth? Can you synchronize with gMail using the Exchange settings for the service? The above tests should give a better idea as to where the problem is; whether with ActiveSync or the USB connection.
There's a great site covering ActiveSync problems. It's out of date but still relevant. Search for ActiveSync Troubleshooter by Chris de Herra.
I had problems with active sync a while ago.
The HD2 would charge but was not recognised by active sync.
If you put the phone into bootloader it says 'serial' at the bottom of the screen
When you connect it to your pc via usb, this should change to 'usb'
Mine didn't.....and a bit of reading around showed that this means the usb socket is faulty.
I sent mine back to HTC and they replaced the motherboard and I've had no problem since.
ericjennings said:
I had problems with active sync a while ago.
The HD2 would charge but was not recognised by active sync.
If you put the phone into bootloader it says 'serial' at the bottom of the screen
When you connect it to your pc via usb, this should change to 'usb'
Mine didn't.....and a bit of reading around showed that this means the usb socket is faulty.
I sent mine back to HTC and they replaced the motherboard and I've had no problem since.
Click to expand...
Click to collapse
Thanks for sharing!
People, come a little help, no way can I synchronize the phone with Windows, I have Windows 7, and installed Windows Mobile Device Center, but they can not sync to make, that would later be some ROM and Radio ROM I put, these are unic few days. I went to microsoft and my phone and there I upload everything and write synchronization is successful, but when Connecting your phone and choose sync anything, open the Mobile Device Center and not conected! Does anyone know the easiest way to sync? I would be eternally grateful to him!
I have another problem, the computer I see the SD card, a phone? I do not know what the problem was that I somehow know to help me, not I need to do factory reset because I have 450 phone numbers, and I can not seem to sync them! Means when I go to Start / Settings / sd card & phone storage, no write down my sd card? And all the programs that are on the card normally do not work! I ask for help!
Thanks in advance!
Got the same problem with Windows 7. Should have stayed with good old XP. Is there no way to get this so called driver?
Have you tried a different USB / microUSB cable?
I had one with a single broken wire that wouldn't charge but would pass data. Maybe you have a broken data wire.
my HD2 came back from repair
I've got my HD2 back from repair centre... and it works fine... most bizar part is paper say that nothing was done...