Related
How can I somehow speed up my XDA? I miss so many phone calls, because it has to "boot up" when someone calls and by that time it's 3 rings in, so by the time I get it out of my pocket and am able to answer by pushing the "Answer" button several times, I'm lucky to get it. I had the XDA IIs, and it was fine. Yet this is just a joke.
Any apps out there available or advice?
Thanks
just curious.... I had a similar problem. I recently unassinged unique ring tones from contacts. and made sure to copy the ring I wanted to use into the main memory(i.e. not on sd card) and this seems to have fixed the issue for me. I have even reassigned the unique ring tones.
Mike
You can adjust the ringing time :-
1) Go to the Phone app
2) Go to the Menu and select Options
2) Go to the Services tab
3) Highlight "Call Forwarding" then click "Get Settings..."
4) Adjust the time in the "Forward after:" box to 30 seconds
I now get six audible rings with old_phone
simply upgrade to the latest radio stack, seems to have fixed alot of peoples universal with the same problem, including my own universal
mine always rings on the second ring and havent upgraded.
but i have changed the forward to 30 seconds by calling my operator and having it changed, 1 month later, I found the manual change capability.
i would be looking to configurations and settings on the individual devices and see what is actually running and going on, cause it aint the phone.
Test this File-perhaps it speed up your Telephone.
The Turbo-Modus on my Universal speed up the Telephone too !
http://forum.xda-developers.com/viewtopic.php?t=39099
Try the cab-File - scroll down a little bit.
Greetings,
Jay
Anyone has the same problem???
When calling someone whos already on the phone, I get the usual busy tone - but on the Vario II's speaker (loud) (like it turns the speaker on automatically,... weird) Its annoying if I want to make a quite call at the office!
Yep, I get that as well! Effin' annoying it is as well when you've got the unit to your ear
I had this same issue once. I am using a HTC branded TyTN. My normal network is Cingular in the US, and I do not get this issue when using my Cingular SIM. I was recently in Singapore using a SingTel SIM, and the busy tone would come out the speaker. When I switched to a M1 SIM (also in Singapore, blasted SingTel does not allow data on prepaid!), I did not have the problem anymore. I also did not have this when using SMART prepaid in Manila or when using DTAC prepaid in Thailand. Also, I was using the stock TyTN ROM at the time. I have since switched to 1.35, but I have not had a chance to travel yet to see if the new ROM fixes the issue.
Same here. Really annoying.
Any solutions, guys?
Here is a fix, HKEY_CURRENT_USER/ControlPanel/Sounds/BusyTone and change the wavfile for a quieter one, I use the busytone.wav file which i think gets installed withe skype ( i am not quite sure where it is originally from, just found it in my windows directory).
Or you can just remove the letters from the 'script' entry there - as I posted earlier today, which will disable it completely.
I don't know if this has been asked/answered but when i dial a phone number using the keypad the sound of the keys goes through the external speaker on the phone- is there a reg edit to make dialing key sounds go through the earpiece and not the speaker?
Thanks
I have the busy tone problem with my O2 trion. I use the workaround of nathanlock and it works great. I also contacted HTC about the problem. They claim that they have never heard about it.
touch tones and busy tone really loud
I have the same issue. i'd really like to fix both. the busy tone is extremely loud, and the dialing tones let everyone in a 10 cubicle radius know you are making a call. I have a love hate relationship with my 8525. love the things it can do, hate the things it sometimes does....
found some sound keys for the dial buttons in the registry, but nothing that looks like volume settings for them.
I have the same issue! it was really anoying... not anymore
tone problem
Nero would you like to explain how you solved the problem
I'm also having the problem with the tones coming out of the speaker when dialling. Additionally when i push the red/orange phone button the phone makes a high pitched sounds from the speaker.
I really dont remember either of these problems a couple weeks ago when I finished properly flashing it. Some one mentioned skype. I did recently install that.
Same here. Strange problem.
workaround update: change "Script" value to "ap" for tone to play only once, and change "Sound" value to "busytone.wav" (comes in rom, at least for HTC TyTN) - it's not loud at all.
Keypad sound issue
I only have the keypad issue. I have looked around but have not been able to find a solution. I would like to have the sound from the keypad in the earphone not on the speaker.
Is this the way the tytn is setup or is it just the group here that has the issue?
Can your "Busy Tone" fix also fix the keypad speaker problem?
Softbank X01HT
HTC Hermes 200 - IPL 1.01 / SPL 1.40.Oli / ROM 3.24.0.4 / GSM 1.40.30.00 (WM6 LVSW Edition 2007/04/08) + Wifi update
I've solved the keypad issue by selecting "Off" in the Keypad combo box at the end of the Phone Setting Page.
I hope it helps.
Cheers
/Joseph
I not really sure where you set this option, keypad combo?
It may be me, but can you be more specific, please?
The option I've found is under Settings-> Phone
You may see three Combo lists: Ring type, Ring Tone and Keypad
For the Keypad you can have "Long Tones", "Short Tones" and "Off".
If you take the last one you won't hear anything when you press use the keypad for making a call.
/J.
Great got it, Thanks! How blind am I?
Solution to busy tone problem
I had the same problem regarding the busy tone going through the speaker. I also had the added aggravation that, after each time that problem happened, my calls would divert straight to voicemail until I soft reset.
Another problem I used to have was that if I had call waiting and tried to answer the waiting call, the phone would freeze and I would have to soft reset with the stylus.
I was using an SPV M3100 with the original Orange UK ROM in Spain, with a Vodafone Spain SIM.
I believe these are simply bugs in the early radio roms. They show up with unpredictable combinations of roaming or using different sims than those of the original ROM operator's.
I fixed both problems by upgrading my radio.
Hope that helps.
Hi, can anyone advise as to why I lose the all sounds on an Orange Branded M3100 phone, other that Microsoft voice command 1.6 no other software has been installed! The details of the ROM are as follows
Operator Version: 14.123.1.614
ROM Version: 1.23.61.4
ROM Date: 07/13/06
Radio Version: 1.06.00.00
Protocol Version: 32.37.7010.01H
Here what happens no sound on the phone, reset the phone sound is now back, after a while, don’t know how long but the sound disappears, you get no ringing sound, menu click sounds nothing, reset the phone again and all is back, so it would suggest that it’s not a hardware failure but a software failure, how can I stop the orange branding installing itself after a cold reset in case something there is causing the problem, has anyone else came across this problem?
This is a brand new phone only received it Friday, does it need to go back?
Kind Regards
Dogo
I've recently noticed on my 8525 too, after a while it seems to just go on silent but the setting isn't changed it still set to on and no sound comes out of the phone no matter what program is used.
Phew, I thought it was just me..
I have noticed it may be something to do with the Bluetooth ear piece, although it always seems to happen when I have left the phone a while. and never when I try to check for the problem
To isolate whether this is hard or software you could try doing a full backup. Do a hard reset and let the device run for as long as it would normally take to show the problem, without any additional software. But do run wifi and power intensive applications to warm up the device - as this can cause internal connector problems.
If the problem is gone, this will tend towards a software problem although not an absolute guarantee. There are some issues that are related to both soft and hardware!! For example the screen fading to white issue can be caused by running (power intense) software that makes the device warm and that in turn causes pressure to be put on the screen.
A final thought, the speaker connection block is next to the stylus tip. There have been cases of the inserting and removing of the stylus causing the connector to become loose. This can cause intermittent sound or no sound at all. The warranty voiding fix is easy. Remove back and check connection is tight. No further dismantling needed. Ensure camera toggle arm is engaged before putting screws back in. (Rear Speaker)
The front speaker can also have issues. has spring contacts that can become slack - poor contact with m/board. There is a thread on checking this.
Mike
No Sound, not a Stylus issue
8525, ms voice dial 1.6,
HTweakC 2.0,
SBP Mobile Shell 1.0.0 build 2632.
ROM 1.34.502.1
radio 1.16.00.00
This has been happening about a week, nothing new installed. On Saturday I missed 12 calls because it was "auto-muted" nothing was on mute, just no ring sounds or anything else. I thought it might be some setting, I suspected that it didn't come back after I had set on vibrate for a meeting, so I went through everything, looks good. had to soft reset for audio to come back. Happened again Yesterday morning after being on charger, had to soft reset, happened again this morning after being on charger, had to soft reset. I'm suspicious of the charge ciruits, the phone was placed on a night-stand and I checked to make sure sound was working AFTER i plugged the charger in (i am an on-call engineer for hospitals) when I got up this AM the first thing I checked was the sound, no sound. Had to do a soft reset and sound is fine.
THIS IS VERY, VERY, VERY troubling.
i cant say that my sound has been "loose"
thefunkygibbon said:
i cant say that my sound has been "loose"
Click to expand...
Click to collapse
yep, I agree. My keyboard slider might be loose, but never had problems with the sound.
No sound - possible solutions
I too have had the no sound problem, but I also have a solution (well it seems to work for me and a few other people I know)
I have found that if I have more than about 800 sms messages on the phone (combined count across inbox, sent items, deleted etc...) my phone will decide sometimes to stop making any sounds.
Other symptoms include thew screen not going back to the background when problems are "closed" (well press the X button), sometimes not changing from portrait to landscape.
Hitting the reset key temporarily fixes the problem, but it strike again at any time...
I have seen this on both the official UK orange firmwares
As a side note, more than about 1000 sms messages and 5 unread sms messages and the phone will lock up about 10 seconds after the phone boots up. You have to be quick when the phone boots to go in to the sms inbox and delete 1 message before the phone locks up. This can be a bit tricky but i have done it a few times
from readingmany related threads, it looks like there are several causes for this issue. for me, it was definitely microsoft voice command 1.5 and 1.6. I turned off any notifications from voice command and my problem went away. no calendar voice announcements, no callerid, no bluetooth routing announcements, etc. voice command simply doesn't give up control of the audio sometimes, and it appears to occur most when it wakes up and announces something.
All I use voice command for now is voicedial. try that a while and see if you are fixed.
1.5 was worse, but 1.6 does it too.
good luck!
wes
saga continues
It did it again, twice in one day. Picked up the phone, (it had been resting on the table for several hours). No sound, I tested by placing a call and turning speaker on.. this works! So the speaker (rear) is fine as well as the front (ear).
After I heard the speaker on speaker phone I tried hearing the dial tones or other sounds, none. No incoming ring.
Device and phone volume on FULL
Turn volume off, vibrate, on, off on, and from phone screen turn to vibrate then back to sound
Vibrate still works for inbound calls
Turn voice command off and on
Go to phone (in settings and play the ring I've chosen) and suddenly it’s working again?
I'll try the turning all but phone options in voice command to no-notify. But to tell you straight, this is silly, one more day of this and it's probably (unfortuately) crackberry city for me. I simply can't have a phone that doesn't ring. I guess some ittertation of an O2 would do.. but I'm not too keen on plopping down another 5bills....
any ideas?
labrati said:
It did it again, twice in one day. Picked up the phone, (it had been resting on the table for several hours). No sound, I tested by placing a call and turning speaker on.. this works! So the speaker (rear) is fine as well as the front (ear).
After I heard the speaker on speaker phone I tried hearing the dial tones or other sounds, none. No incoming ring.
Device and phone volume on FULL
Turn volume off, vibrate, on, off on, and from phone screen turn to vibrate then back to sound
Vibrate still works for inbound calls
Turn voice command off and on
Go to phone (in settings and play the ring I've chosen) and suddenly it’s working again?
I'll try the turning all but phone options in voice command to no-notify. But to tell you straight, this is silly, one more day of this and it's probably (unfortuately) crackberry city for me. I simply can't have a phone that doesn't ring. I guess some ittertation of an O2 would do.. but I'm not too keen on plopping down another 5bills....
any ideas?
Click to expand...
Click to collapse
I have just read your last two posts. I am wondering whether you are saying you have a sound/ringer problem OR whether you mean the phone sometimes crashes and therefore does not ring (i.e. you then need a soft reset) and sometimes you discover you've missed a call but never heard it ring.
If the above is true then I think you need to look for the solutions for avoiding hangs/freezing. I can guide you to these or a search will show them. It certainly does not appear that you have any physical problem with the speaker/earpieces.
Mike
dogo said:
Phew , I thought it was just me..
I have noticed it may be something to do with the Bluetooth ear piece, although it always seems to happen when I have left the phone a while. and never when I try to check for the problem
Click to expand...
Click to collapse
Hi, I never had a sound issue untill I started usin my HT820's, but have noticed a few times lately that my device sounds arent working, (I dont mean always through to the bluetooth headset) and I just power off/on the device, I dont get that many calls, so I havent missed any, and wasnt sure if it was rom or bluetooth related for sure, but I do usually leave my bluetooth on, just not always the headsets, it also doesnt happen a whole lot.
Loose connector
I'm not sure if this will help anyone, but i was losing sound on my 8525. I had dropped my phone twice and the rear speaker connection had gotten loose so i opened it up following the directions at http://www.howardforums.com/showthread.php?t=1152710&page=1&pp=15
and now i have sound again.
Continued Issues
Mike, thanks, the issue isn't with the phone locking up at all, it's been very stable, I think I've soft-reset probably 3 times in two months.
The phone literally will stop emitting any sounds. I can still hear if I place a call and if I place that call on speaker phone it's fine. However if you call the phone, try to play an audio file, etc there is no sound that emits from the device.
It did it AGAIN today, I tested, was able to place a call and put it on speaker and called it with my other phone, the pop up screen announcing the inbound call came up and everything else on the phone worked as it should (except no ring). I then went to settings phone and hit ok (top right of screen). BAM.. sound was working on the device again, inbound calls ring, able to play audio etc.
I did note one other possible anomaly, I have my PTT mapped to initiate voice command, when trying to use this I was unable to initiate voice command. After going to phone and pressing OK, voice command started working again. W/O voice command I'm sunk, I have 500+ contacts.
I placed a call to AT&T and I'm back on the "chronic retention" list.. ughhh.. I went through 8 treo's last time. I don't want another basket of refurbs to deal with, I like WM so much better than previous interfaces.. any ideas are very, very, very welcome.
-mike
More information
This morning, the sound was gone again, but I went into settings and started playing to see what else might induce it to work again, I tried voice command again, disabled and re-enabled, that didn't work.
I then went into sounds and that didn't work, went into Today, and Buttons neither of those worked, but when I went into input (didn't do anything, just opened it and closed it) sound started working again.
Hopefully, none of you guys have a newer ROM with the loud startup animation and attempted to turn down that volume via the registry as outlined in the wiki. Unfortunately, doing that also lowers the speaker volume so I just disabled the animation instead. Phone and bluetooth sounds fine but mp3 and everything else were also lowered to a whatever level depending on the startupanimation volume you set.
update
It did it to me again yesterday, this time only going to settings phone and pressing OK would make sound come back.
Today, the phone refused to dial or emit any sound. Would not come back after soft reset (would not dial, no sound) had to do a hard-reset (removed battery). After first soft reset a windows came up to advise that mobile voice command couldn't start...
For a darn near $500.00 phone this is pretty sad. Love the phone but gee whiz...
Daily occurance
Well, it does it every single day at least once a day, and I've noticed the phone has slowed a lot, sometimes during SMS or email the cursor goes away or I have to wait 20-30 seconds for words to complete typing after I've finished. I guess I'll get my refurb next week. Perhaps go back to palm.. dunno...
possible fix?
I turned OFF the SMS message sounds and it seems to be working w/o losing sounds again! I'll let it run for a couple of days and see if this is the deal, but I now have no audio announcement for ActiveSync, POP email, SMS, or MMS. I do have audio/vib for missed calls. Anyway, it's been up and running fine all day. Good Grief.
no fix in sight
On hold with ATT right now for another phone. It did it again today at about 10AM. Strange, it may be time sequential, but it didn't do it at all yesterday.. it was great to have the phone ring.
Hi !
Has somebody found some solution to reduce the delay for the ringtones for blackstone ?
I've installed the second cab here (http://forum.xda-developers.com/showthread.php?t=258109) as well as write in the registery (av0pw0r), but i can't reduce the delay under (almost) 2 ring tones, eventough i use a *.wma file.
I've also tried to play on HD tweak (1.7 option), but this does not change anything...
This is very annoying me, i've already lost some calls.
I haven"t tried yet a cooked ROM, but i wonder if this would change something
Please help
make sure the ringtone is on the phone and not card. That helped me a lot.
tks for your answer.
But well, i use (for the moment) the "Alarm-Classic.wav" under windows\rings, so i think it's ok from this side
How much delay do u have ?
hi.
using wma ringtones I get a response on my HD in about 1 ring after a soft reset. From the second call on the HD rings at about half a ring to the caller.
three rings from to wake from soft off.
but i forgot to say that if the phone is already "on", the delay is about 1/2 half ringtone, which is acceptable ! .
It seems that the additionnal delay (about 1 sec.) comes from the phone to go from "standby" to "on"
I've always had a delay with every HTC I've had (C500, C600. E650, Touch HD) using standard and custom ROMs with ringtones as WAV's and MP3's on the device and the storage card. I got used to it ages ago and if the phones on my desk can now predict an incoming call before it rings
Hi,
I was also searching for a solution on the ring tone delay issue. Guess that is a winmobile thing.
However there is no delay if you switch off the ring-tone and enable vibration mode only. That is weired behavior of the phone cause why cannot the ring-tone sound as fast as the vibration comes in vibmode only? And why does the vibration comes as late as the ring-tone when in combi-mode?
I am afraid there is no solution so far...
Regs!
this delay is something you'll have to learn to live with, unfortunately. at least in europe people seem to be finding loud and/or dodgy ringtones not very nice, and when dealing with the wiindows mobile vibrate mode is the one to go for.
another suggestion is to set up a caller tune, people are more likely to wait longer when they're listening to music.
ive found i can get it to ring at 1 ring if i turn off caller id pictures on s2u2
Yeah, the operating system does all the checks and clearing up before handling the call to prevent dropping, the way WM handles things, you can't get way from the delay, slowing the CPU with app like a nuedynamicclock worsens it. Well I notice a call before it rings if it is on
SlakerBoi said:
this delay is something you'll have to learn to live with, unfortunately
Click to expand...
Click to collapse
All my wm devices have had this issue. My blackstone lights up from sleep a good 2 to 3 sec. before the first ring. I use the old phone ring tone and have four fairly well spaced rings before vm kicks in. I just count the rings as I get to the phone and it has become a non issue. The hd tweek for it seemed not to have an effect btw. Also I'm with t-mo usa and using their code I have my ringtime set to max rings. which is 30 sec. before vm.
There is a delay between incoming call and actually the phone ringing. Did you notice that as well? I asked my callers already several times how many rings they have heared. Normally 2, and I only heared one. So?
As well there is a small delay between picking up and actually being able to speak... Did you notice this as well?
i'm facing the same problem
Thx for your feedback. So now the question is if there is any reg-hack to speed this up.
I noticed that too.
But if you pay attention, there is a low ring in the background. Make a test in a zero noise environment..
@uterrorista, low-ring? pretty usefull, ha?
@all, pushing up the topic.
pretty bad, if the "waking up" process takes that long so the caller already got something like 3-4 rings until I hear the first ring...
any idea?
Upgrading your Radio should mostly solve this problem. And always try to have your ringtones in main memory rather than storage cards because power to sd card cuts of in standby mode and may take some time to return after awaken by a call.
Regards,
Carty..
With the new radio occurs the same.
Incoming call delay
This may help....
Somethings to consider:
1- I would say the actual ring signal is not always synchronized with the ring back tone we heard. The may come from different system within a complex telecom network. Therefore, some delay is expected as normal functionality in all telephone systems (Fix and mobile ones). What you hear when calling is send by the phone systems you are connected too (i. e. fix phone line of your provider central office systems). What makes your phone ringing is a command (teleco-protocol) sent by the system you are registered-in) So, we do not expect a ring to ring back sync any way.
2- To the previous fact, we should add the wake-up time, ringing tone search and play back as well as picture and info shown on display, call execution inner in the process on your JADE. You may minimize a bit these things, but I would say only a bit if you have the device always awake (battery waste) and your ringing tones are in the main memory.
3- if your phone does not give you radio problem, please do not upgrade it. You may run in problems you did not have before and it will void your warranty.
4- We can go further and add our ear and brain response time.
5- The time that comes for the call to go to diver destination or voice mail, counts from the moment that your phone is seized by your host public system and not from the moment the caller hear the first ring back tone.
Conclusion:
I do not see a real problem as far as it does not go over two ring back tones.
A lot of ringtones are silent about 1 second before they actually start (just like some songs and stuff). That might be your problem?
cPT.cAPSLOCK said:
A lot of ringtones are silent about 1 second before they actually start (just like some songs and stuff). That might be your problem?
Click to expand...
Click to collapse
No, it isnt. Mine is the dafault tone.
If the jade is near a pc monitor, the monitor starts to make interferences two or three seconds before the screen lights up and the tone starts ringing.
yesterday it rang 1x and my caller said he heared the ringtone on his side of the line 5x!!!! wtf!?!?
what can we do to fix this?
Hello my radio version is 0.27.30.09 (from stock)
I too had a 3 ring call delay, i installed jademan superrom (which did not update the radio version , it's still the old one) and somehow the call delay vanished...
Or u can try the reg tweak to set the ring script to "av1pr" using sktools... works well for me..
hope that helps
Raghav_K said:
Hello my radio version is 0.27.30.09 (from stock)
I too had a 3 ring call delay, i installed jademan superrom (which did not update the radio version , it's still the old one) and somehow the call delay vanished...
Or u can try the reg tweak to set the ring script to "av1pr" using sktools... works well for me..
hope that helps
Click to expand...
Click to collapse
Can explain the sk-tweak please?
Sure :d
install the latest sktools, Choose tuneup < phone edition < ring script and typr av1pr... which gives u a very short vibrate and ring... (which fits me cos the ring volume isn't very high and i dont wanna miss calls in noisy areas.. U can see help to modify the script to ur needs)
or if u prefer editing registry, use a registry editor to go to HKCU/ControlPanel/Sounds/Ringtone0/script and change the REG_SZ value to av1pr
annoying incoming call delay
Hi,
i have changed the registry script as people say but no difference. And that's no surprise as if you read the script letter by letter "av1pr" means activate device/vibrate/play ringtone/repeat. The original script "apw3r" again means "activate the phone/play rington/wait 3 seconds/repeat". So the 3 seconds delay happens AFTER the phone plays the ringtone the first time.
However, the activation(with activation I mean to wake up the phone from standby) actually happens always on the beginning of the second ring. I have another phone and I have done few tests calling the jade so I am sure of what I am saying.
By the way, I dont know if you noticed but changing the ringtone changes the script back to the original one. But it doesnt really matter given that this tweak doesnt make any difference.
I have to say instead that disabling the skin dialer allowed me to gain 1 second, and now the phone activates just before the second ring. So I believe that the solution should be found somewhere else and not in the script that everyone keeps talking about.
I think I have read that the superrom doesnt have this problem(jade rom development in this section). What did it change in there? why it doesnt show that?
Any help appreciated
Franco
Actually av1pr means activate & vibrate 1 sec & Ring
apw3r means activate & wait 3 sec and play ringtone
I used to get the caller screen and no ring till 3 sec till i changed that.... i know it resets everytime after u change rt but no prob for me cos i don change RT often and sktools has an easy way of changing it
And i need it to vibrate for 1 sec coz ring volume is a bit low in htc phones..
PS: i'm using superrom too
Raghav_K said:
Actually av1pr means activate & vibrate 1 sec & Ring
apw3r means activate & wait 3 sec and play ringtone
I used to get the caller screen and no ring till 3 sec till i changed that.... i know it resets everytime after u change rt but no prob for me cos i don change RT often and sktools has an easy way of changing it
And i need it to vibrate for 1 sec coz ring volume is a bit low in htc phones..
PS: i'm using superrom too
Click to expand...
Click to collapse
well, the phone follows the sequence of commands so if it is:
apw3r
the phone will a=activate, then p=play ringtone, w3=wait 3 seconds, r=repeat sequence.
So the 3 seconds delay is after the first time the rt is played.
But I have the same initial delay with both scripts it does p**s me off really!
have you tried to use another phone to call your jade with the superrom? how long does it take to play the tone?
well i have tried and my jade starts vibrating by the time the first ring ends( in the phone from which i'm calling)
can u try the decrease ring delay tweak in the mighty enhancements section of this link and see if it works
http://triton.homeip.net/RegistryChanger/
My own experience is that SuperROM made absolutely no difference at all, neither does hacking the ringtone script (as other have said, the "delay" is after the ringtone has started anyway).
What did make a difference in both the stock & superrom firmware was to disable the HTC dialer skin and revert to the WM6.1 caller id bubble. This reduced the average delay to about 1 second. The other variable is whether the phone is in full suspend mode or awake - my phone certainly takes longer to activate from full suspend mode (full suspend being suspend on battery).
Haven't tried the new HTC stock ROM yet, maybe this improves things? I think it will take some changes to the low-level drivers to improve on the 1 second wake-up with WM6.1 dialer (these may be in the new stock ROM, all of the cooked ROMs use low-level drivers from the original stock ROM so will all be the same in this respect).
Raghav_K said:
well i have tried and my jade starts vibrating by the time the first ring ends( in the phone from which i'm calling)
can u try the decrease ring delay tweak in the mighty enhancements section of this link and see if it works
http://triton.homeip.net/RegistryChanger/
Click to expand...
Click to collapse
Absolutely no difference whatsover. Again, the only improvement I can get is when I disable the dialer skin and use the wm default one. Then it rings just before hearing the second tone on the calling line.
To be honest I am not surprised, the registry key that is changed is:
HKCU\ControlPanel\SoundCategories\RingPreview\InitVol
which clearly refers to a volume level and not to a time delay...??