hi,
anyone having the same problem im having during phone calls? i would receive a text message during a phone call with another person then i would try to reply on the keyboard but some of the keys only input as number and not the the letters assigned as usual. for example B, N, and M only work as 7, 8, 9.
anyone know how to solve this problem?
I have a tytn, 6.1 wimo.
best regards.
You're using the slideout keyboard and not the onscreen one, right? This has been posted before but I'm not sure if anything was ever sorted. My advice, use the onscreen one. I know that works... Cheers
Related
Very often I have to write an SMS with one hand, but it is impossible with Qtek 2020.
I would like to find a software where you can write an SMS with the standard mode (like on normal GSM) with standard numbers 1-9 with letters on them.
I use D9 to find the contact and I think it is very usefull.
When you find a contact and you tap the SMS button near the number it should be very appriciated to have a standard GSM input letter mode (like T9) instead of default SMS client of WM.
Do someone know if a software like this exists?
Thanks for the answer,
Urosh
GO to www.yorch.net and look under "software".
I' don't find any software I described before.
Please let me know which one do you think do what I said.
Thanks,
Urosh
I apologise, I thought it was on yorches site, here is the link for you, it is a superb piece of software and it is FREE. Anybody else wants a brilliant sms program make sure you get it too.
http://www.handango.com/PlatformSea...siteId=1&txtSearch=designlab&zsortParams=true
I just found a bug in this program when running on xda2, if you push "select" button when entering phone number it gives an error, but ig you spend a little time inserting all your often used numbers you can use the drop down becuase it remebers the last 20 numbers that you have used, its worth a little time to set it up becuase it saves a lot of time in the long run.
Actually it's not working at all with my mda ii It says: message sent successfully, but later on-message not delivered Do you have any idea what I could be doing wrong? Is there a special format in which I have to put the number of receipient?
i think, only way is spb fullscreen keyboard or typeango ..
It's working fine on my XDA-II with T-Mobile ROM 1.60. The only thing is that if I am trying to send to local mobile number I have to enter the number with '+', country code etc. while I could use 'short' number with ordinary mobile phone.
Zeljac said:
Actually it's not working at all with my mda ii It says: message sent successfully, but later on-message not delivered Do you have any idea what I could be doing wrong? Is there a special format in which I have to put the number of receipient?
Click to expand...
Click to collapse
Ok, that seemed to do the trick. Tnx a lot, it's working now flawlessly. But, I still have another question -how do you input "+" directly from the SMSwriter. "+" is on the same key as the "0" and whatever I do I keep getting "0". Of coarse, I could call up the keyboard but for that would again need a stlyus
Its a serious shortcoming, its a pity somebody couldnt patch on the ability to select searchwhich would bring up the contacts list, any offers from you programmers please???
unfortunately, found no way around it, I used to enter '+' with soft keyboard using a pen. The only temporary solution which comes to my mind is the list of numbers used to send SMS already (there should be some 25 numbers kept).
Zeljac said:
Ok, that seemed to do the trick. Tnx a lot, it's working now flawlessly. But, I still have another question -how do you input "+" directly from the SMSwriter. "+" is on the same key as the "0" and whatever I do I keep getting "0". Of coarse, I could call up the keyboard but for that would again need a stlyus
Click to expand...
Click to collapse
For me is impossible to use this software only with my fingers.
It has too small dialogue boxes (to find the contact).
For me the best solution would be to have a D9 program that integrates a SMS client which has the same keypad which is at the start of the program (with big buttons) to write to message (when the contact has just been selected).
Bye,
Urosh
is there a way you can send DMTF with the JAM like in most nokia phone if not all
They say that if you switch off sound when you press buttons, DTMF tones are sent correctly. There was such a reply in this forum. Sorry, I don't remember the author
DTMF is no problem with my device even with sound/tones active when pressing the buttons.
bamse said:
DTMF is no problem with my device even with sound/tones active when pressing the buttons.
Click to expand...
Click to collapse
It was not good on mine - T-Mobile MDA Compact. In some cases the other side did not show reaction on incoming tones. With the sounds set to "off" it became fine.
do one of you guys know, how i can store these dtmf tones? for example i you've got a mailbox where you have to enter a code for access. the easiest way(you don't have to remebmer the code) is to store the phone number incl the dtmf tones in the phonebook. like nokia does it, e.g. +49323244322p1234
after the p is the access code.
do you know a way how to do this with the magician?
thx in advance
simple. create a contact with the dial string. assing a speed dial and you're good to go.
111-2222,,,,1233
each comma makes the phone wait a few seconds before inputting the 1233 string.
Hope that helps.
cool thx. its working.
It is the same as Nokia
You can also do with the magician as with any other phone. The Pause digit ("p") is a standard convention. If you use it in a number in a Nokia phone, the phone will wait for the other end of the call to "pick up", and then will send the remaining characters as DTMF.
Same on the Magician. You should have just tried.
The use of commas is also standard and works in all phones, but it just makes a 1-second pause, which is not very reliable for the first DTMF sequence after "pick-up". In fact, due to line coverage, 4 commas might work one time, but not the other time. "P" works all the time.
On my Magician phone book I actually have very long sequences of DTMF, to check various types of voicemails, or use calling cards. I always use "p" after the main number, after that the use of p or comma is the same, it's always 1 second.
the "p" doens't work with my mda compact.
the , is okay but p not.
i tired before, otherwise i wouldn't ask
:roll:
That's really strange!!!! Could it be that MDA's have got a different dialler (my Magician is i-mate)?
Hello,
On most phone when you get an SMS with a phone number in it, you can allways underlined the number and then push CALL BUTTON and call this number
Example : hello John, call Suzan at 0123456789
and then 0123456789 will be underlined and you can call this number
Is that possible on Magician ? Anyone know a trick ?
Thanks guys
Wow! This is so old problem but so important for me. Are there any solutions now?
You can draw a line on the screen with a Gel-pen.Then write it to a paper.Then dial it!
HAHA,just joking.
Universal
I have the Qtek 9000 and it has the feature. I'm not sure if it's a WM5 thing or just a Universal thing.
It's a feature that Microsoft added only with Windows Mobile 5.
You won't get it with older versions of the Messaging app.
With my XDA and XDA2, I just used to drag over the number, Tap+Hold, and choose Copy, then Edit/Paste into the Phone app.
No other way, unfortunately.
Quick question. I just installed phonealarm on my phone but I'm having trouble registering. When I go to the about tab and click register, i can't bring up the keypad to enter my serial number. Does anyone know how to register the software? Send pocketmax an email but no response yet. Your help will be appreciated.
It worked fine for me. Make sure the input field is selected, or do a soft reset and try again.
While we're talking about PhoneAlarm, does anyone understand the notifications? I basically want my phone to have 2 profiles: to vibrate on recieveing SMS and calls, and do to nothing on recieving them. Before i installed phonealarm i would change the phone between vibrate & silent, but now that doesn't seem to work because of the phonealarm profiles. I have to change both the phone and phonealarm to get what i want. Is there an easier way?
Many thanks.
what do you mean input filed needs to be selected?
Mine also never had that problem, but the last 2 times I have reloaded my ppc, it has done the same, not showing the keyboard.
Go to the about tab where you need to register. Click in the blank block where you need to enter the number. Press your start button, it will then bring up the keyboard icon at the bottom. Click on the keyboard and type in your code. Click on register. This way worked for me.
thanks a lot it did the trick!
I installed the English only phone pad from the ftp site and all seemed to work well, however i just went to make a call and was typeing in the name in the phone pad so it would select the names with the number in and this didnt work?
eg to phone Jon i typed in 56 and expected it to display all those names with the name Jo or 56 in the number - but no this didnt appear? Is there anyway to get this back???
Thanks in advance
also noticed that on my old phone pad if i pressed down i could list all the last calls and missed calls - this phone pad does not have this funtionality - any help would be greatly appreciated!!!
It also appears to drop calls regularily when in 3g mode - i have since disabled 3g to see if there is any improvement! I had this same problem with my wizard - however a rom upgrade fixed that! Just really dont want to go for a rom upgrade yet as i seem to read to many horror stories about the current roms!!
disabling 3g seems to have improved the dropping of calls but still unsure why the phone pad wont do the smart search as it did do it on the tmobile phone pad before i installed english phone pad!
I have now tried to select the smart dialing options however when I select it when the phonepad is activated it does not do anything!
this is getting worse now! I can't regress back to my previous dialer it just keeps the htc blue dialler but the main problem is I can't access my voicemail messages because it doesn't recognise the tones when I press the keypad! any help would be greatly appreciated!