Quick question. I just installed phonealarm on my phone but I'm having trouble registering. When I go to the about tab and click register, i can't bring up the keypad to enter my serial number. Does anyone know how to register the software? Send pocketmax an email but no response yet. Your help will be appreciated.
It worked fine for me. Make sure the input field is selected, or do a soft reset and try again.
While we're talking about PhoneAlarm, does anyone understand the notifications? I basically want my phone to have 2 profiles: to vibrate on recieveing SMS and calls, and do to nothing on recieving them. Before i installed phonealarm i would change the phone between vibrate & silent, but now that doesn't seem to work because of the phonealarm profiles. I have to change both the phone and phonealarm to get what i want. Is there an easier way?
Many thanks.
what do you mean input filed needs to be selected?
Mine also never had that problem, but the last 2 times I have reloaded my ppc, it has done the same, not showing the keyboard.
Go to the about tab where you need to register. Click in the blank block where you need to enter the number. Press your start button, it will then bring up the keyboard icon at the bottom. Click on the keyboard and type in your code. Click on register. This way worked for me.
thanks a lot it did the trick!
Related
Very often I have to write an SMS with one hand, but it is impossible with Qtek 2020.
I would like to find a software where you can write an SMS with the standard mode (like on normal GSM) with standard numbers 1-9 with letters on them.
I use D9 to find the contact and I think it is very usefull.
When you find a contact and you tap the SMS button near the number it should be very appriciated to have a standard GSM input letter mode (like T9) instead of default SMS client of WM.
Do someone know if a software like this exists?
Thanks for the answer,
Urosh
GO to www.yorch.net and look under "software".
I' don't find any software I described before.
Please let me know which one do you think do what I said.
Thanks,
Urosh
I apologise, I thought it was on yorches site, here is the link for you, it is a superb piece of software and it is FREE. Anybody else wants a brilliant sms program make sure you get it too.
http://www.handango.com/PlatformSea...siteId=1&txtSearch=designlab&zsortParams=true
I just found a bug in this program when running on xda2, if you push "select" button when entering phone number it gives an error, but ig you spend a little time inserting all your often used numbers you can use the drop down becuase it remebers the last 20 numbers that you have used, its worth a little time to set it up becuase it saves a lot of time in the long run.
Actually it's not working at all with my mda ii It says: message sent successfully, but later on-message not delivered Do you have any idea what I could be doing wrong? Is there a special format in which I have to put the number of receipient?
i think, only way is spb fullscreen keyboard or typeango ..
It's working fine on my XDA-II with T-Mobile ROM 1.60. The only thing is that if I am trying to send to local mobile number I have to enter the number with '+', country code etc. while I could use 'short' number with ordinary mobile phone.
Zeljac said:
Actually it's not working at all with my mda ii It says: message sent successfully, but later on-message not delivered Do you have any idea what I could be doing wrong? Is there a special format in which I have to put the number of receipient?
Click to expand...
Click to collapse
Ok, that seemed to do the trick. Tnx a lot, it's working now flawlessly. But, I still have another question -how do you input "+" directly from the SMSwriter. "+" is on the same key as the "0" and whatever I do I keep getting "0". Of coarse, I could call up the keyboard but for that would again need a stlyus
Its a serious shortcoming, its a pity somebody couldnt patch on the ability to select searchwhich would bring up the contacts list, any offers from you programmers please???
unfortunately, found no way around it, I used to enter '+' with soft keyboard using a pen. The only temporary solution which comes to my mind is the list of numbers used to send SMS already (there should be some 25 numbers kept).
Zeljac said:
Ok, that seemed to do the trick. Tnx a lot, it's working now flawlessly. But, I still have another question -how do you input "+" directly from the SMSwriter. "+" is on the same key as the "0" and whatever I do I keep getting "0". Of coarse, I could call up the keyboard but for that would again need a stlyus
Click to expand...
Click to collapse
For me is impossible to use this software only with my fingers.
It has too small dialogue boxes (to find the contact).
For me the best solution would be to have a D9 program that integrates a SMS client which has the same keypad which is at the start of the program (with big buttons) to write to message (when the contact has just been selected).
Bye,
Urosh
In my Contacts in WM 2003 I used to be able to define an access number before I call my contact e.g.:
08707940000,,01xxxxxxxxx.
Where the first number is access number and the second is the contact's number.
However now, the phone only dials the access number (the first number) and after a short pause I can hear it dialling 3 to 4 DTMFs but it is not actually dialling them because the provider is not picking it up the DTMFs.
I have to dial the numbers manually and than its OK.
Can anyone reproduce this? Please help!
Same issue here... I have a contact like this:
+3493532XXXX,1234#,0561617XXXXXXX
This dials +3493532XXXX (my home number) where I have an asterisk box, then I hear the message "Please enter your password followed by the pound key" and the DTMFs for the password and # key are sent correctly (in the number the passwd is 1234), then I hear the tone where I can dial any number, I dial 056 (prefix to use FreeWorldDialout on my asterisk) and 1617XXX (USA Boston number)... I hear all the numbers, but I see my asterisk hanging up before the whole number has been sent.
Very weird... I will do some more tests to see if I can find any solution...
Ok, finally I got the solution... do not put more than 4 digits without a comma (pause)... i saved my contact like this and now it enters the password and dials correctly:
+3493532XXXX,1234#,056,1617,XXX,XXXX
Hope it helps you too! :shock:
I did what you did, the problem seam to be that the DTMF tones are not sent at all aldough I can hear them.
I'm getting this too very odd. Getting rather bored of holding the phone up to my speakers so I can play the right tone and empty my voicemail box!
hi.. got my vario II on friday, and i have the same problem. i used to be able to dial an international number on my UNIVERSAL by calling the local access number and insert a pause before dialing the international number for example: 02071246666,006596454343. however, this does not work on vario 2 and i am very upset about it!!
Hi,
you have checked this:
HKLM\Drivers\BuiltIn\RIL: EnableDTMFSupport = 0
switch to
EnableDTMFSupport = 1
Hi,
Thanks for the help, but i tried that, but it was already set to "1".. i switched to "0", soft reset, switch back to "1", soft reset again, but still not working...
I am also having this problem, cannot empty voicemail at the moment.
I have the same problem on my Vario II. When I'm entering the number manually during the call I can hear the sound, but the other end does not respond to my input at all.
This is really annoying as I can't get into my voicemail or contact customer service
Anyone had a solution for it so far?
Are there more people with a TyTn/Vario with this problem? If so, do respond because it might be a bug or something...
Motje said:
This is really annoying as I can't get into my voicemail or contact customer service
Click to expand...
Click to collapse
On my Vario II if I go to the phone app dial 150 and when connected then press keypad I can then navigate the customer service menus by pressing the on screen number keypad if that is what you mean?
Yes, that is exactly what's not working for me. I can press the keys during the call, and I hear the tone, but somehow the other end does not get them.
Interesting topic I just saw on MoDaCo: http://www.modaco.com/Problem-with-Phone-Dialer-on-Hermes-t247377.html
It turns out that it is not just the DTMF, but also the d-pad up key not going to the call history, and the 3G icon having changed to U.
This all happened after a hard reset.
Can anyone else who did a hard reset confirm if they have any of these problems?
Check that
HKLM\SOFTWARE\HTC\3GVTEngine\AMRDTMFToneFile = "\windows\dtmf122.amr"
then try changing the value of
HKLM\SOFTWARE\HTC\3GVTEngine\UseAMRDTMFTone
from 1 to 0 or 0 to 1
No idea what it means, but it is set up in some Preconfig setups
Excellent, I solved my problems. What I did was re-install all the cab files from the extended ROM. This gave me back my T-Mobile dialer and also made the DTMF working again.
Motje said:
Excellent, I solved my problems. What I did was re-install all the cab files from the extended ROM. This gave me back my T-Mobile dialer and also made the DTMF working again.
Click to expand...
Click to collapse
That worked for me to.
Mine worked fine untill I installed the DeepOcean dialler skin and then it stopped working - removed it and it came back (DeepOcean lacked smartdial).
Installed the Eten dialler and smartdial, and have lost the tones again, think this phone skin is great, but it won't properly uninstall (need the original T-mobile phone skin/graphics) so am currently stuffed!
Have done all the usual soft reboots etc.
I'm confident if I re-instated the deafault t-mobile dialler it would come back, however, I don't want to do a hard reboot and reinsatlll all the add-on apps and data.
Any ideas how to get the DTMF tones working - I can 'hear' them, they are clearly not being sent, If I put it on speaker phone, then in clear conditions the mike picks it up and it works!!
Any ideas?
DTMF Doesn't work - FIXED IT!
Fixed it!!
Editing the registry and setting the value to 0, then soft reboot and dtmf tones are working.
Setting it to 0 wasn't the obvious choice, and previously I hadn't soft rebooted.
Found the following from dhushy in:
http://forum.xda-developers.com/showthread.php?t=276700
Worked it out. For anyone with a similar problem, use the registry editor to locate the following key:
HKLM,"Drivers\BuiltIn\RIL","EnableDTMFSupport",0x0 0010001,1
Change the value from 1 to a 0 and Bob's yer Uncle (for non-British readers that means everything will be cushty - see Only Fools and Horses for a contextual translation)
Did this and I was able to manipulate my voicemail messages as normal.
Click to expand...
Click to collapse
I am on T-Mobile UK.
A Big Thank you
This advice on changing the dtmf code from 1 to 0 was the thing ive been lokking for - for the last 4 months. A really big thank you
Just got my new Orange M3100 (Tytn) and I'm having problems with trying to forward incoming calls to another number. I have to divert and cancel divert often during the the working day and could do with a short cut to the settings call forwarding page. I don't seem to be able to make one... Could anyone advise...
Also trying to do similar with Bluetooth settings as I swap my BTheadset between phones just as frequently. I have found a link on this site to a utility to do that but not had chance to try it yet...
Can I just make a shortcut to that as well ??
Apart from that it appears a excellent device, running Tomtom etc without any problems....
Thanks in advance Phil
All the ways I tried to create such a shortcut do not work, because it requires an USSD "call". I asked WM5NewMenu author to implement USSD handling, will see...
For now the best solution I've found is to assigh speed dial keys in the dialer to USSD sequencies to divert and cancel diverts. It's OK for a while because speed dial keys can be easily accessed with one hand only (green phone button, then arrow left or down).
EDIT: In case you don't know USSD sequences... You'd better consult your operator to be sure. For me:
Divert all calls: **21*number_to_divert_to#
Cancel divert of all calls: ##21#
There are also codes for conditional diverting, of course.
Hi Phil,
What Lurker0 has mentioned is a good idea. You can save those strings as a number in a contact and maybe assign a speed dial or voice tag to that contact for speed? I guess one contact to enable and another to disable. The commands Lurker0 mentions are standard over all networks.
I'm not sure if there are ways to send AT commands to the modem in the TyTN (M3100) but it is another possible way to do it if someone knows how, if not then it might be useful info to someone else.
The AT command you need to send is AT+CCFC=1,1,<number>,128,1,,, this is the number in local format (no +44) like 07968xxxxxx to enable and AT+CCFC=1,0 to disable.
Gavin.
Phonealarm may be a simpler solution as I think u can add a forward number within a profile so just switching profile from the Today screen (phonealarm skin) would do the trick...
www.pocketmax.net
I've not had any dealing with the ATM commands so to be honest I wouldn't know were to start. I've just tried to install Phone alarm in my Orange SVP
M3100 but after asking me if I need and extra language the software just locks up.. Soft restart then required....
I managed to find the directory that it was installed in, the setup prog is there but I can't find the executable file, I guess that it has not got that far !!!!
Any help please...Phil
I'd suggest to try USSD codes as the easiest and 100% working solution.
Tried the ussd numbers in the contacts list.... works very well both divert and cancel divert... Just need to setup the speed dial now, were is that manual !!
Thanks again.
Phil-w
Hi Phil,
Go into the phone skin (green button) > Menu > Speed Dial...
That's you...
Gav.
Speed Dial is also at "green phone button" then arrow left, or arrow down, or wheel down. So one hand operation is possible.
Many thanks to you both... Nice to find helpfull people on here... Phil
phil-w said:
I'm having problems with trying to forward incoming calls to another number. I have to divert and cancel divert often during the the working day and could do with a short cut to the settings call forwarding page. I don't seem to be able to make one... Could anyone advise...
Thanks in advance Phil
Click to expand...
Click to collapse
Phil,
I do the same and installed the O2Plus (and patch) software which tweaks the today screen and gives direct access to mutiple profiles for different forwarding options - works really slickly.
Check this forum for the .cab files
Hope that helps.
Rgds
Lifechanger
i tried putting the codes in a speed dial but Tytn unhelpfully said i had to enter the sequences in from the phone pad directly. all i did was put the **21*<no># in as a speed dial. did i miss something somewhere?
If you are rooted, start a shortcut to "Activities". Scroll down to "Phone", expand that, then scroll down to "Call forwarding". Select! Easy peasy.
Newbie here...... When I call in to check my voicemail, the system doesn't seem to recognize my key entries. Could I possibly have the wrong setting in the registry. I can make call just fine. I just can't enter any information. Any body know what's wrong??
Sometimes this is simply a matter of using long tones for key presses instead of short ones. Try going to Start/Settings/Phone and in the box labled Keypad select 'Long tones'. This actually worked for me when accessing many phone activated menus such as airlines, banks etc.
Good morning.
Could I please get some advice about settings or versions of smartdialing.
I am lucky enough to have a Diamond and an X1.
Smartdialing on both decives brings up the desired contact, the differences I have noticed is that on the Diamond when you tap the contact it immediately rings the last number dialed for that contact, be it home, work, mobile etc.
On the X1 tapping the contact opens the contact details allowing selection of what function to carry out. ie. the normal WM screen, call home, work, send text etc. which I prefer.
Is there anyway to change the settings to get the Diamond to react in the same way as the X1?
Many thanks in advance for any assistance.
oo03sjw said:
Good morning.
Could I please get some advice about settings or versions of smartdialing.
I am lucky enough to have a Diamond and an X1.
Smartdialing on both decives brings up the desired contact, the differences I have noticed is that on the Diamond when you tap the contact it immediately rings the last number dialed for that contact, be it home, work, mobile etc.
On the X1 tapping the contact opens the contact details allowing selection of what function to carry out. ie. the normal WM screen, call home, work, send text etc. which I prefer.
Is there anyway to change the settings to get the Diamond to react in the same way as the X1?
Many thanks in advance for any assistance.
Click to expand...
Click to collapse
YES that is also what I need, I used a Wizard and Tytn II and both did the same but not with the Diamond and I what that back!!
Is there someone who knows a solution for this??