Database Users

Writing SMS with standard mode with one hand?

Very often I have to write an SMS with one hand, but it is impossible with Qtek 2020.
I would like to find a software where you can write an SMS with the standard mode (like on normal GSM) with standard numbers 1-9 with letters on them.
I use D9 to find the contact and I think it is very usefull.
When you find a contact and you tap the SMS button near the number it should be very appriciated to have a standard GSM input letter mode (like T9) instead of default SMS client of WM.
Do someone know if a software like this exists?
Thanks for the answer,
Urosh

GO to www.yorch.net and look under "software".

I' don't find any software I described before.
Please let me know which one do you think do what I said.
Thanks,
Urosh

I apologise, I thought it was on yorches site, here is the link for you, it is a superb piece of software and it is FREE. Anybody else wants a brilliant sms program make sure you get it too.
http://www.handango.com/PlatformSea...siteId=1&txtSearch=designlab&zsortParams=true
I just found a bug in this program when running on xda2, if you push "select" button when entering phone number it gives an error, but ig you spend a little time inserting all your often used numbers you can use the drop down becuase it remebers the last 20 numbers that you have used, its worth a little time to set it up becuase it saves a lot of time in the long run.

Actually it's not working at all with my mda ii It says: message sent successfully, but later on-message not delivered Do you have any idea what I could be doing wrong? Is there a special format in which I have to put the number of receipient?

i think, only way is spb fullscreen keyboard or typeango ..

It's working fine on my XDA-II with T-Mobile ROM 1.60. The only thing is that if I am trying to send to local mobile number I have to enter the number with '+', country code etc. while I could use 'short' number with ordinary mobile phone.
Zeljac said:
Actually it's not working at all with my mda ii It says: message sent successfully, but later on-message not delivered Do you have any idea what I could be doing wrong? Is there a special format in which I have to put the number of receipient?
Click to expand...
Click to collapse

Ok, that seemed to do the trick. Tnx a lot, it's working now flawlessly. But, I still have another question -how do you input "+" directly from the SMSwriter. "+" is on the same key as the "0" and whatever I do I keep getting "0". Of coarse, I could call up the keyboard but for that would again need a stlyus

Its a serious shortcoming, its a pity somebody couldnt patch on the ability to select searchwhich would bring up the contacts list, any offers from you programmers please???

unfortunately, found no way around it, I used to enter '+' with soft keyboard using a pen. The only temporary solution which comes to my mind is the list of numbers used to send SMS already (there should be some 25 numbers kept).
Zeljac said:
Ok, that seemed to do the trick. Tnx a lot, it's working now flawlessly. But, I still have another question -how do you input "+" directly from the SMSwriter. "+" is on the same key as the "0" and whatever I do I keep getting "0". Of coarse, I could call up the keyboard but for that would again need a stlyus
Click to expand...
Click to collapse

For me is impossible to use this software only with my fingers.
It has too small dialogue boxes (to find the contact).
For me the best solution would be to have a D9 program that integrates a SMS client which has the same keypad which is at the start of the program (with big buttons) to write to message (when the contact has just been selected).
Bye,
Urosh

Please... How do I make a shortcut to get to call forwarding

Just got my new Orange M3100 (Tytn) and I'm having problems with trying to forward incoming calls to another number. I have to divert and cancel divert often during the the working day and could do with a short cut to the settings call forwarding page. I don't seem to be able to make one... Could anyone advise...
Also trying to do similar with Bluetooth settings as I swap my BTheadset between phones just as frequently. I have found a link on this site to a utility to do that but not had chance to try it yet...
Can I just make a shortcut to that as well ??
Apart from that it appears a excellent device, running Tomtom etc without any problems....
Thanks in advance Phil

All the ways I tried to create such a shortcut do not work, because it requires an USSD "call". I asked WM5NewMenu author to implement USSD handling, will see...
For now the best solution I've found is to assigh speed dial keys in the dialer to USSD sequencies to divert and cancel diverts. It's OK for a while because speed dial keys can be easily accessed with one hand only (green phone button, then arrow left or down).
EDIT: In case you don't know USSD sequences... You'd better consult your operator to be sure. For me:
Divert all calls: **21*number_to_divert_to#
Cancel divert of all calls: ##21#
There are also codes for conditional diverting, of course.

Hi Phil,
What Lurker0 has mentioned is a good idea. You can save those strings as a number in a contact and maybe assign a speed dial or voice tag to that contact for speed? I guess one contact to enable and another to disable. The commands Lurker0 mentions are standard over all networks.
I'm not sure if there are ways to send AT commands to the modem in the TyTN (M3100) but it is another possible way to do it if someone knows how, if not then it might be useful info to someone else.
The AT command you need to send is AT+CCFC=1,1,<number>,128,1,,, this is the number in local format (no +44) like 07968xxxxxx to enable and AT+CCFC=1,0 to disable.
Gavin.

Phonealarm may be a simpler solution as I think u can add a forward number within a profile so just switching profile from the Today screen (phonealarm skin) would do the trick...
www.pocketmax.net

I've not had any dealing with the ATM commands so to be honest I wouldn't know were to start. I've just tried to install Phone alarm in my Orange SVP
M3100 but after asking me if I need and extra language the software just locks up.. Soft restart then required....
I managed to find the directory that it was installed in, the setup prog is there but I can't find the executable file, I guess that it has not got that far !!!!
Any help please...Phil

I'd suggest to try USSD codes as the easiest and 100% working solution.

Tried the ussd numbers in the contacts list.... works very well both divert and cancel divert... Just need to setup the speed dial now, were is that manual !!
Thanks again.
Phil-w

Hi Phil,
Go into the phone skin (green button) > Menu > Speed Dial...
That's you...
Gav.

Speed Dial is also at "green phone button" then arrow left, or arrow down, or wheel down. So one hand operation is possible.

Many thanks to you both... Nice to find helpfull people on here... Phil

phil-w said:
I'm having problems with trying to forward incoming calls to another number. I have to divert and cancel divert often during the the working day and could do with a short cut to the settings call forwarding page. I don't seem to be able to make one... Could anyone advise...
Thanks in advance Phil
Click to expand...
Click to collapse
Phil,
I do the same and installed the O2Plus (and patch) software which tweaks the today screen and gives direct access to mutiple profiles for different forwarding options - works really slickly.
Check this forum for the .cab files
Hope that helps.
Rgds
Lifechanger

i tried putting the codes in a speed dial but Tytn unhelpfully said i had to enter the sequences in from the phone pad directly. all i did was put the **21*<no># in as a speed dial. did i miss something somewhere?

If you are rooted, start a shortcut to "Activities". Scroll down to "Phone", expand that, then scroll down to "Call forwarding". Select! Easy peasy.

[Q] phone dialer with visible contact info

hi,
I just changed my Wizard for Touch HD.
First not-so-cool thing I've noticed is that in the WM 6.1 on my Wizard when I wen to dialer, found the contact and selected it I got to see the photo and all the data about the person. This way I could choose the phone number to dial or even send email/sms. This was cool if you had the phone numbers mixed etc...
Does anyone know how to get the better dialer than current Touch HD ?
Thanks,
Smartin

Writing SMS through phone dial dialog

Hi everyone,
if I search for a name via the dial numbers in the phone dialog (after pressing green dial button) it works fine to dial the numbers of the persons I found. But if I press the left or right key to switch between home or phone number, mail or sms, I'm not able to create SMS or mails out of this window. On my old htc artemis with wm6 but without touchFlo it worked fine and it is much more useful than going to contacts overview because of the easy searching.
Hope you understand what I try to say
Thanks for any help, Tobi

You are right. However, once name is selected (with <m>) you can tap "Menu" - "Send Text Message" to send SMS.

Hi,
You can search your contact on the sms or email screen. At the line of the phone number, you write the first words of your contact and you have the list of your repertory.
You have only to choose at which of them you want to send an sms. I think it's easiest like this !

Thanks for both of the answers
@azahidi: I found this out yesterday, you're right thats an option, but not an advance I think, menu is too inconvenient for finger control. the greatest problem is, that if I select a contact with my finger, the phone directly calls it insteat of just selecting it and giving me further options.
@pinou13: that's great, I didn't know this yet, I think that solves my problem in a way
But nevertheless, it would be great, if one could set that if I click on the contact in the dial window, instead of directly dealing the number, showing the same overview (call cell phone, call home, write mail, write sms) from the contacts window.
If someone know a solution to do so, please post it, but so far it's an alternative to do it via sms or mail menu.
Thanks, Tobi

You can solve your problem with the Spb Mobile Shell. It is very finger-friendly to use, I am happy with it, but it has to be paid after 14 days free trial. For details: http://www.spbsoftwarehouse.com/pocketpc-software/mobileshell/

Hm, looks great, but that's around 10% of the phones costs. I prefer to use freeware and I rather like touchFlo, but not in that one little thing

Contacts/Phone app

Hi guys, I've just moved over from iphone so still finding my feet with android.
For the most part android is far superior but the contact side of things is still bugging me. This is what I want to be able to do:
1. Have my call log as calls only, not texts. I know you can change this to view calls received, dialled etc, but it soons defaults back and shows everything. I just want my log to have dialled and received and nothing else? I'm sure i've read somewhere on the net that this was possible on the SGS through a hack??
2. I want to set up a favourites list of say best mate, gf, work etc and just be able to press their name and it dials there number, not opens another window that shows history, text option, dial option video call option, i.e. just direct dial. I also would like this to be the first screen that opens when I press my phone icon on the dock??
I've set my gf up on my desktop as a direct dial shortcut, but I don't want to be doing that for everyone. I've got a load of contacts but maybe only dial 10 at most on a regular basis.
are there any hacks or thrid party dialers that do this??
Cheers
Lee

landerson07 said:
Hi guys, I've just moved over from iphone so still finding my feet with android.
For the most part android is far superior but the contact side of things is still bugging me. This is what I want to be able to do:
1. Have my call log as calls only, not texts. I know you can change this to view calls received, dialled etc, but it soons defaults back and shows everything. I just want my log to have dialled and received and nothing else? I'm sure i've read somewhere on the net that this was possible on the SGS through a hack??
2. I want to set up a favourites list of say best mate, gf, work etc and just be able to press their name and it dials there number, not opens another window that shows history, text option, dial option video call option, i.e. just direct dial. I also would like this to be the first screen that opens when I press my phone icon on the dock??
I've set my gf up on my desktop as a direct dial shortcut, but I don't want to be doing that for everyone. I've got a load of contacts but maybe only dial 10 at most on a regular basis.
are there any hacks or thrid party dialers that do this??
Cheers
Lee
Click to expand...
Click to collapse
I can help you with #2. Just swipe right on your favorite and you call that favorite immediately. Swipe left to immediately send a message.

landerson07 said:
Hi guys, I've just moved over from iphone so still finding my feet with android.
For the most part android is far superior but the contact side of things is still bugging me. This is what I want to be able to do:
1. Have my call log as calls only, not texts. I know you can change this to view calls received, dialled etc, but it soons defaults back and shows everything. I just want my log to have dialled and received and nothing else? I'm sure i've read somewhere on the net that this was possible on the SGS through a hack??
2. I want to set up a favourites list of say best mate, gf, work etc and just be able to press their name and it dials there number, not opens another window that shows history, text option, dial option video call option, i.e. just direct dial. I also would like this to be the first screen that opens when I press my phone icon on the dock??
I've set my gf up on my desktop as a direct dial shortcut, but I don't want to be doing that for everyone. I've got a load of contacts but maybe only dial 10 at most on a regular basis.
are there any hacks or thrid party dialers that do this??
Cheers
Lee
Click to expand...
Click to collapse
hmmm, can't say i can see a way around No.1, other than using a new dialer/contacts app such as Go Contacts or Dialer One etc..
must say, i actually quite like the comprehensive log, coming from Sense and Stock roms with calls only, i like having it all in one place...
Dialer One would be my choice, but only as i used it on CM7 on my Hero for its smart dial feature... can't comment on Go Contacts
hope this helps
Dickie

I use loads off texts a day so within 10 mins of dialling someone their details are long gone
I'll check out Go Contacts and Dialer One though, thanks for the recommendations

This is a Samsung thing, regular android does not put texts with the call log. I don't think I'd like them to be combined like that.

it is the right thing to do
RogerPodacter said:
This is a Samsung thing, regular android does not put texts with the call log. I don't think I'd like them to be combined like that.
Click to expand...
Click to collapse
I like them combined. There again, there could be an option to control it.

Go Contacts is just the ticket
Thanks guys, much better now