Hi everybody !
First af all, sry for bad english ! i will try to do my best but i'm french so this could explain some mistakes.
Does anybody experienced the same trouble ?
1/ my 4 buttons ( contact, calendar, camera and record ) always reset ! maybe 1 or 2 times a day.
I always have to go in the configuration panel to re-set the standard function and i can't have anymore access to the "record" button.
If i do -) start -) parameters -) buttons i always have to redeploy the affectation af each button by choosing in the list above BUT in this list i can't have access to the 'hotvoice' or if u prefer the 'record' application !
so i can't program the record button again to record !
am i clear enought ?
2/ when my 4 buttons reset i have a message on the screen (will try to translate ) "can't find the shortcut or pb with the shortcut / can't access to the required function "
Can anybody help ?
Qtek2020 or XDA2
SFR
Calendar+ today plug in
Scott Seligman's Launcher
FV&&PB Metro
that's all
Tks 4 all
Eric
Hi everybody
26 read and no response.
So i'm the only to have this pb OK well u can feel u all happy.
Sry for bothering u so !
Nice end of day 2 u all
Eric
never had that issue maybe because i leave the buttons at default
apart from the calander button which is set to voice command
and that dont get kicked back to default calander when i reset
Is there any way to get it so that the device lock (pin lock) can be disabled when connected to ActiveSync or a charger? If I have the phone in the car it locks after a time, which is a real bore.
Maybe there is a registry entry for the delay before locking and this can be changed using a program (activated by keystore / button pressing)?
Any ideas most usefull, as I need to have the pin in place as the Prophet is a minefield of information!
same problem !!!!
the device lock it self during when i try to take good shot be camera !!!
so i need to enter the password to i can back again to camera
if only the device lock it self when i turn it off like window 2003
this will be great
Posted from another Pocket PC / Smartphone website, i have applied it to my phone but not been able to test it yet....
1. Get a registry editor (I used minied of sourecforge.net, because its opensource, but there are many others available)
2. Go to the following key:
HKEY_LOCAL_MACHINE\Comm\Security\LASSD\AE\{50C13377-C66D-400C-889E-C316FC4AB374}
- The value called AEFrequencyType will be 1. Change it to 2.
- Ensure the value called AEFrequencyValue is 0
Exit the editor and reset the device.
From now the device should only lock to the password screen when the power shuts off, as per pre-AUK2 behaviour.
Note that if you go in to the lock settings screen, it will try to change the AEFrequencyType value back to 1. Also, this will *not* work if you have an Exchange 2003 enforced policy for this setting active. The policy will overwrite it.
Thanks for that
I will give it a try and see what happens.
Works like a dream!
Brilliant. Thanks for the reg hack. Brilliant and works a treat. Now, whenever the mobile is connected to ActiveSync or charging, no pin lock.
Glad to be of service, thanks for letting me know it works.
I want my Jam not to ask me Pin code at start up, how can i do this ? Any program or settings u know ? I will use this function in phonealarm , when switching the flight mode profile to normal radio mode profile ( yes it can do this according to the daily schedule u made )
Hello
Go to menu phone in start menu or settings-->make sure that the checkbox on the separator phone saying:require a Pin when phone is used is off!!that's it!
Cheers
Thanx a lot Dervian, that was i needed.
ANyone please help. My BA's Touchscreen is cracked and not functioning anymore. But for now i need to use it. When sending SMS i have to touch or press the Send button from the touch screen. But since my screen doesnt work anymore, is there a way like assigning the "Send" button into the hardware key?
Or is there any application that can do this? Anyone please help!
Thanks in advance!
hi
what do u mean cracked?there is a picture and there is no tap action?or there is no picture and response anymore?there is like damage in lcd like un usual colors and rabush and lines?because may be if u change the rom or re-upgrading the rom,may be the problem fixed,specially in minor problems.
i think u cannot send msgs without tap action.
there is a crack, display is okay, but touch response is not fuctioning well, the only thing i notice is that, when i press on the right bottom most of the screen, sometime touch works and sometimes not works. I been trying to do the Align screen method but doesnt work. i think it is the hardware problem.
if that sms is really that important to you, you can always connect the device to the pc and when connected to activesync a nice little freeware called "my mobiler" can be used to control the device with the pc's mouse and keyboard and gets the device's screen on your pc screen. it can be downloaded here:
http://www.mymobiler.com/
but after bypassing the problem for now, we should focus on getting the thing fixed. you could answer homam_france's questions to help us determine what exactly went wrong and maybe you don't need to bypass then anymore but can solve the problem!
EDIT: ignore the request for more information, you already answered while i was writing this
@Chef_Tony
Thank you, but that is what I am doing right now. But my problem is that when i am not in from of my pc and I need to send important sms? Maybe there is a software that can map the Send softkey to hardware key.
Thanks again!
you could try this program:
http://classic.pocketgear.com/software_detail.asp?id=21070
there is a trial version there, and if you can install, start and control that program without the use of the touch screen, or from your pc, maybe you can tell it to for example, map the left softkey with the mail hardware key or something like that, i haven't tested it. if that prog is not right, on the bottom of that page there is a link for related applications, maybe one of those helps you.
if, however, the remapping of the keys does not work, for a different sms application, you could try:
iwindowsmobile sms chat:
http://iwindowsmobile.com/threaded-sms-messaging.html
visual it simple sms:
http://www.visualit.co.uk/PocketPC/simplesms_V5.htm
or this one:
http://www.mobileflipper.com/mobile-tips/sms-application-for-windows-mobile-50-60-and-61/
maybe their way of hitting the send button is different and works for your device.
by the way, on any normal mobile phone, you can also send an sms by pressing the green call button, unfortunately, ppc phones don't do that.
greetz
Chef_Tony
Why don't you just go to Setting/Personal/Buttons and map a button to "<Left Softkey>"
Thanks to everyone
Thanks to you all. I finally got a chance to fix my touch screen. not bad at all. except that i forgot to right fit the volume hardware keys.
Be very careful with the Volume key, if you don't close the case wright, you might broke the switch (a little switch on the mainboard that is moved by the volume key). Just make shure it's in the wright place when closing the case
Hi to all.
What can I do in case the ba is working, the screen is perfect but no more touch? it's a os 5.2.1933(18533.0.7.0)
thanks
that can happen but it has probably nothing to do with the rom. it means that the digitizer is broken and you need to look for a new one, maybe a good ebay search or a post in xda's marketplace could help you
thanks 4 the reply. Do you mean a new lcd screen?
no, just the digitizer, it is the see through touch panel on top on the actual display, maybe you are lucky and find a cheap one, as you don't need a new screen.
you can buy a new digitizer on dealextreme.com, i recall a few months ago they were selling the digitizers for Blueangel devices, its very easy to disassemble the BA & replace it. Good luck.
BA Screen alignment settings at HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH
Can any of the members pl. post the screen alignment settings available at Registry entry Screen alignment settings for BA and/or variants at HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH
Value Name: CalibrationData
Value data:
? (5 sets of data)
Value type: REG_SZ
Value Name: MaxCalError
Value Data: ?
Base : Decimal
Value type: REG_DWORD
With these values most of the BA devices with defective touch screen can become functional to large extent.
Actually we can add the values to the BA Wiki
Regards
here's the CalibrationData:
17 154,258 154,788 865,785 859,262
i dont have a MaxCalError key.
Good luck,
dtd
Hi DTD,
Thanks for the prompt reply. Pl. verify the data provided by you as it doesnt seem to have the 5 sets for the CalibrationData values & repost correctly.
Thanks in advance
Regards
Hi
sorry if this is double posted - first time i posted in this thread structure here
first: Thanks a million for a great tool (had to appraise your great effort )
i have a HTC touch pro 2 (couldnt find any solution reading setting manual that worked for pro2), and have these questions:
1. I cant get the three times tapping on the batteryicon to work - noting happens. What do i have to do to make this work on my device? (where is the capacitive sensor located on a pro 2 ?)
Alternative where is the capacitive wipe up located on this device and how to activate this feature?
2. can i make a hardware button as eg "home" button unlock ? If so what do i have to do? I have tried entering the code UnlockKeySequence in section "Keyboard" (i have checked none of the options and i have left blank the field "UnlockedKeys" - is that correct?) for each of the 4 hardware buttons as specified in the manual but it appears that all are ignored by TouchLockPro:
15 = End:
114 = Talk
91 = Home
8 = Back:
The hardware keys seems to be responsive eventhough i have not entered any addresses in field "unlockKeys" - thats not supposed to work like that ?
3. I want keep alive OFF to save battery power (i take disabling this is identical to putting device in sleep mode?) - how can i see if this is disabled ?
4. In section "Telephone API" i entered the command string "!SCREENOFF " in the fields "incoming", "connected" "ended" but it seems that the screen bounces back on again after a short OFF period - it seems to just when connection is established. This is a BUG - or am i missing some setting?
thanks Nolan