Related
Hi every one.
So i set "button lock" and also disable mainly all notifications but every time a new sms arrives,the screen goes on.I will like to keep the screen off because if you carry your magician in your pocket and after that sms arrives,you can accidentaly press any button or even touch the screen.
I been checking every thing i could check but i can´t find the answer about this problem.
Thanks in advance.
Third party software Pocket Zen Phone or phoneAlarm.
Ok i´ll check it and see what i can do.
Cheers mate.
User22 said:
I will like to keep the screen off because if you carry your magician in your pocket and after that sms arrives,you can accidentaly press any button or even touch the screen.
Click to expand...
Click to collapse
There are many occasions the Magician turns on its screen. Rather than trying to find and disable all these, I copied TPDisable.exe and TPEnable.exe from the original Extended ROM into my Program Files folder, and then assigned them to a hardware key (using Hotbutton, so that I can use the same key for both).
As the name implies, TPDisable disables the touchscreen (not the display!), and TPEnable re-enables it. So, before I put my Magician into my pocket, I now disable the touchscreen (one press of a button). That still leaves the keys active, true, but I found that normally the touchscreen is much more likely to be the culprit when strange things happen on your Magician while it's in the pocket, and turned itself on.
Cheers
Daniel
@ tadzio
Well,that is a very interesting solution,but i can´t find TPDisable.exe
or TPEnable.exe inside my magician.I need a bit more info from you
Daniel.
Thanks a lot for your replies.
What happens if you hold down power button for 2 seconds to switch off backlight? Does the light still illuminate on receipt of sms?
@ cruisin-thru
I can´t see the point of your question,mainly because the thing i am looking for is to "switch off" my Qtek like a normal mobile phone,i mince buttons locks and screen off when a new sms or incoming call arrives and when you push power button for example,then screen go on and also release the lock of the buttons.
Any one can say that then i can use deltalock.I did it but the battery live is going down very quick.
Screenlock is not working properly also,i will say that Deltalock is 95% a lot better than Screenlock.
And finally,why microsoft is developing this OS without fully screen off selectable option???. Who knows!!!
Cheers
User22 said:
Well,that is a very interesting solution,but i can´t find TPDisable.exe or TPEnable.exe inside my magician.I need a bit more info from you Daniel.
Click to expand...
Click to collapse
Both programs are in the Extended ROM. Most users have made this visible (though not writable) by performing a Hard Reset, and immediately after completing the initial screen adjustment and mini-tutorial and before the device starts installing programs, a Soft Reset.
If you do not want to do a Hard Reset, search this site's FTP server for Magician Extended ROM downloads. There were a few there last time I looked.
Cheers
Daniel
Well,after config hotbutton to TPDisable and TPEnable i can´t enable the screen and hardware buttons.
TPDisable is disablind the screen but also all the hardware buttons ( with and without button lock at settins),even the power button.
I use same hardware button for TPDisable and TPEnable ,is that correct or i am doing silly things?
If I arrive an sms the screen is switching on and after a few seconds switching off again if I don't press any key or tap the screen!
It's a changeable registry key:
HKEY_LOCAL_MACHINE / System / CurrentControlSet / Control / Power /
WakeupPowerOff =12 (the default is 180)
DisableGwesPowerOff=0 (the default is 1)
If you switch on the Jam (power button) need to press some other key too, because it switches off after 12 seconds!!!
by Avers
@avers
Well that is another solution but i insist that there should be an easiest way to keep the screen fully off when a new sms or what ever arrives,including hardware buttons off ofcourse.
Any suggestion more?, perhaps at the end and betwen all of us ,we can find the solution.
Cheers.
I think the best solution is third party software like PHONEALARM,
it's easiest way to get main tweaks of Pocket Windows.
get it there
http://www.pocketmax.net/phoneAlarm.htm
Well my friends,pocketzenphone is not doing what i am looking for.
Next step is to try phonealarm,but probably will work the same way as pocketzenphone,leting the screen to go on every time a new sms arrives.
Sorry for my languaje but F... microsoft and F... devil gates.
As you can read on this post ,phonealarm IS NOT doing it.
http://www.pocketmax.net/phpbb2/viewtopic.php?t=429
phonealarm has option named "Don't activate backlight on alarm"
ALARM there means any event, that needs notification.
now i am understanding, that it is some differ that you need.
also i advice you make some registry tweaks to make a very short backlite time when sms arrives.:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\WakeupPowerOff = 10
this timeout in seconds. is used when our device self power on, when SMS arrives or we push the POWER button and do nothing anymore
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\DisableGwesPowerOff = 0
this key is enables this power control system (necessarily change it, or first key will not work)
after the editing registry you need to reboot PDA.
sorry for poor english, i translate text from russian.
if you want to use online translator i can give you original URL
_http://forum.ladoshki.com/viewtopic.php?t=16012
Thank you for your reply i will try like you and others point out and also will keep looking for that utopic soft.
deltaLock locks the screen and buttons even if you get sms or calls. I use it on my JAM and it works so far.
bnycastro said:
deltaLock locks the screen and buttons even if you get sms or calls. I use it on my JAM and it works so far.
Click to expand...
Click to collapse
If you read one of my post ,you will see that i allready said that Deltalock is working but it is KILLING the battery live very fast and when i say VERY FAST it mince that you will get almost 6hours against the normal live (more than 15hours).
Cheers mate.
I think if you keep your ppc on all the time you will get this battery life. Anyway I think deltaLock is for keeping your PPC on and having screen and button lock, not having it in suspend mode and not allowing the screen to power up. Sorry about that, seem to have misunderstood your post.
Don´t worry mate, at the end we are all together trying to find a solution to this microsoft silly programing, any comment and any new idea is wellcome.
Cheers.
Thought this might be a good place to start listing any quick tips and tricks you might have discovered.
To Lock Device quickly
Keep finger on the Red (Call End) button and it will bring up some options including keylock.
Not sure if anyone's noticed this but when I end a call on my Dual there is annoying little delay of about 3 seconds before the actual call is ended so I searched the registry and found this:
[HKEY_LOCAL_MACHINE\Software\HTC\PHONE\PhoneExtendSetting]
And I changed the value of EndCallTime from 3000 to 1000 re-booted and voila no more delays when ending calls
Hold the on/off button for soft reset.
Smart Dialing
This is an advertised feature but apparently not too many people are aware of it. Go to the phone app and start tapping the first couple of letters of the contacts name and the name matches will appear for you to choose from. I find this much easier than opening up the Contacts app and scrolling down to the name you need.
after pressing send for phoneapp u see last calls.
If u press left/right on the highlighted contact the phone switches through home/mobile/office...
HKLM\Software\HTC\Biotouch\Biotouch\ regulates the FPS of the cubeanimation.
Change "DownFPS", "LightFPS" und "UpFPS" to something higher for a smoother (and faster) animation.
Disable 3G, if not needed (it drains the battery faster than GSM):
Edit the registry key HKLM\Software\OEM\UMTS\OpMode and set it to "1"
Then also you could change that setting
Phone Settings --> Band --> Network Type --> GSM
To activate the changes, open the comm manager from the Cube, disable the phone and enable it again.
In italy with Vodafone I can't able to select also the Network Band GSM/UMTS to "GSM(900)" but I have to let it configured as "Auto" or "GSM(900+1800)+UMTS(2100)"
Bits
Ello, new here.. no idea if this helps a few Dual owners but..
Apps found to work on the touch dual:
S2u2 (iphone slide to unlock app), works like a charm:
http://forum.xda-developers.com/showthread.php?t=343256
HHC, HTC Home Customizer (name says it all), also working like a charm:
http://www.pocketemu.com/download4.html
gfreek, thnx for the EndCallTime key, works perfect and.. 1 less annoying feature to go
Things I'm still looking to solve:
1. Mp3 ringtone seems to fade out after picking up a call, for about 2/3 seconds the ringtone is still audible :S
2. Looking for settings for the Handsfree profile, i have an Lm959 bluetooth bracelet (how geeky, i know), works fine.. but only for calls, the device is capable of blinking the leds on receiving msgs, im looking for the settings to enable just that on the TD.
3. Polling frequency of the TD seems to be on the high side, f.e. it takes about 3 rings from someone before the TD starts "ringing", since voicemail kicks in @ ring 6 I miss a lot of calls.
I found a topic about just this problem with the touch(Elf) on sprint networks, with a quickcode (##7380# I think, well.. I'm not on sprint..so that doesnt work over here.. anyone with any clue would be welcome.. My current solution is disabling voicemail..)
ln1234 said:
To Lock Device quickly
Keep finger on the Red (Call End) button and it will bring up some options including keylock.
Click to expand...
Click to collapse
to do this quicker go to settings => long press end key
and select automatically execute and then lock device
holding the red button then locks the device in one press
You can invoke s2u2 instead normal devicelock
just install s2u2, rename Slide2Unlock.exe to EndKey.exe and copy all files to windows directory, with resco explorer.
the ilock doesnt seem to be working on my touch dual. when i try to go to settings, the screen goes blank.
You need to disable directdraw, do it via the registry as you can't access the settings.
raid said:
Disable 3G, if not needed (it drains the battery faster than GSM):
Edit the registry key HKLM\Software\OEM\UMTS\OpMode and set it to "1"
Then also you could change that setting
Phone Settings --> Band --> Network Type --> GSM
To activate the changes, open the comm manager from the Cube, disable the phone and enable it again.
In italy with Vodafone I can't able to select also the Network Band GSM/UMTS to "GSM(900)" but I have to let it configured as "Auto" or "GSM(900+1800)+UMTS(2100)"
Click to expand...
Click to collapse
Is there a way to add the "3G setting" directly in the Comm Manager as seen here : http://forum.xda-developers.com/showthread.php?t=354380 ?
GpsPasSion said:
Is there a way to add the "3G setting" directly in the Comm Manager as seen here : http://forum.xda-developers.com/showthread.php?t=354380 ?
Click to expand...
Click to collapse
Go with Total Commander to:
\\registry\HKLM\Software\HTC\CommManager and change the key
"SupportedFunctions" from 4 to 5
then make a new map named "5" (without the quotes)
go to that map and make a STRING named "default" and the string must
be "3G" (also without any quotes).
Then turn the phone off and on again and there is a 3G setting in your CommManager. I did not manage yet to add a icon in front of it
(and also not tested the working of the new setting)
Thanks, someone also pointed me to Schaps' app that has that setting http://forum.xda-developers.com/showthread.php?t=317070
GpsPasSion said:
Is there a way to add the "3G setting" directly in the Comm Manager as seen here : http://forum.xda-developers.com/showthread.php?t=354380 ?
Click to expand...
Click to collapse
Another way ...
Go to ... Start > Settings > Phone > GSM/UMTS Band , Set Network to "GSM" & Leave GSM to "Auto".
nightfear said:
Another way ...
Go to ... Start > Settings > Phone > GSM/UMTS Band , Set Network to "GSM" & Leave GSM to "Auto".
Click to expand...
Click to collapse
nice one..thanks
dapoldi said:
3. Polling frequency of the TD seems to be on the high side, f.e. it takes about 3 rings from someone before the TD starts "ringing", since voicemail kicks in @ ring 6 I miss a lot of calls.
I found a topic about just this problem with the touch(Elf) on sprint networks, with a quickcode (##7380# I think, well.. I'm not on sprint..so that doesnt work over here.. anyone with any clue would be welcome.. My current solution is disabling voicemail..)
Click to expand...
Click to collapse
that is driving me MAD at the moment. I'm missing almost all my calls.
Wish there was a way to change the amount of rings before voicemail kicks in.
please help someone!
Lord of the Badgers said:
that is driving me MAD at the moment. I'm missing almost all my calls.
Wish there was a way to change the amount of rings before voicemail kicks in.
please help someone!
Click to expand...
Click to collapse
ah found it, at least for UK Orange people:
Please bear in mind that the following code is only valid for phones on the Orange UK network.
The code to set the length of time your phone rings is:
**61*07973100123*11*??#
Where ?? is the time in seconds, e.g. to set the ring time to 30 seconds you would type the following code at the standby screen then press the green send button:
**61*07973100123*11*30#
To make your phone ring for only 10 seconds:
**61*07973100123*11*10#
The code works in 5 second intervals, i.e. you can set 5, 10, 15, 20, 25 & 30 seconds.
Click to expand...
Click to collapse
works fine. thank god.
Lord of the Badgers said:
that is driving me MAD at the moment. I'm missing almost all my calls.
Wish there was a way to change the amount of rings before voicemail kicks in.
please help someone!
Click to expand...
Click to collapse
go to the phone application
Settings->Services->call forwarding
Set the time to what you want
Arnon
## TamerSpClock v1.4 ##
Last update 13 Dec 2008
"TamerSpClock" is a Windows Mobile 2003/5/6 software which lets you take hand over your time to the max. It is a fully customizable speaking clock & a chimer.
- you can choose a THEME of time intervals of 1 ,5 ,15 ,30 or 60 minutes ,Then you can choose actions to be done on these choosen theme intervals.
- you can adjust when to speak time or chime and when to mute in a way that differs from other programs by means that you can set multi portions (intervals) of time that mute the program automatically for daily use. you can access the file "Validity.ini" found in the folder named "settings" inside the program installation path. this file can be edited by any notepad or word (pocket or pc word) then you can specify at what hours to work on and what to mute (just Change validity = 0 corresponding to hours that needed to be muted & Change validity = 1 to the rest of the hours).
- The program can wake up the device without waking up your screen conserving your battery life and will chime even if the ppc is sleeping or in a deep sleep, The software have a feature that can force the screen not to wakeup (BlackMe feature) at chiming times or (if you choose to) to leave it to the current windows mobile configurations (settings) to decide ,this is useful for some ppc that wakeup the display on every chime which may have negative results on battery life.
- you can put your own wav files to be chimed ,just insert them in folder "Wav" found inside installation directory but use the same names of course.
- This software differs from other similar products in that if you choose for example 15 minute iterval for speaking the clock ,it wll activate itself and speak time on whole miute numbers like 15-30-45-60 and will not just repeat the choosen interval starting from the time you switched it on which results in speaking times like 4:52 and 7:27 etc.
- you can choose or omit salutations like "the time is" & "Am ,Pm" & saying "Oclock" at the whole number hours. this can be customized using the provided links to enable and disable the action features.
- you can choose whether to use vibration or no with the chiming process.
- you can stop all software processing events by one finger click.
- Software will automaticaly activate itself and work again after any restart of the device.
- you can set an action like signal check to work with Themes (feature to check signal strength every x time) if the signal drops ,it will announce you with an alarm ,this feature only works if the phone is on and the signal is less than 40%.
- you can set an action like Zekr which can help Muslims remember their Lord every 5 minutes with a low volume sound saying God is the most Great. This option acts solely without dependency of the choosen theme interval since it have a fixed firing every 5 minutes (take it or leave it).
# How to install Cab file of TamerSpClock:
1- For versions prior to v1.4 you must download MortScript from the following link
(Version v1.4 & above already have it embedded inside software)
http://www.sto-helit.de/index.php?mo...=view&entry=65
This software acts like an environment for "TamerSpClock" to work. please note that "TamerSpClock" cannot run without installing this software.
2- Transfer cab to any place on your ppc using active sync or any other communicating software.
3- Choose whether to install to Device or to MemoryCard ,It is very important to choose the installation target location during the setup process corresponding to the version you downloaded whether it is on memory card or on phone. Note that program is hard coded ,this is why this point is very important for the program to work.
4-For Version v1.4 & above before running program ,press the icon named "RunFirst" prior to run the program (This acts as if MortScript Cab is installed)
This software had been tested on HTC Tytn & found stable ,Also can work on any windows mobile device.
I have been looking for an hourly chimer that does not wake up the screen. The disappointing thing about this one it it is hard coded to run from the storage card. Can this be modified to use variable paths?
One issue I have with installing to the storage card is Windows Mobile unmounts the card to save power on some devices. I also change my card based on what I am doing. I keep my maps on one card and my MP3s on another.
painter_ said:
I have been looking for an hourly chimer that does not wake up the screen. The disappointing thing about this one it it is hard coded to run from the storage card. Can this be modified to use variable paths?
One issue I have with installing to the storage card is Windows Mobile unmounts the card to save power on some devices. I also change my card based on what I am doing. I keep my maps on one card and my MP3s on another.
Click to expand...
Click to collapse
Added 2 versions ,one if you want to setup on the Phone Main Memory & the other for Storage Card.
This really sounds great - but how to use it?
I am no expert in programming or in mort scripting.......
I would like to use this feature: "you can set an action like signal check to work with Themes (feature to check signal strength every x time) if the signal drops ,it will announce you with an alarm ,this feature only works if the phone is on and the signal is less than 40%."
But no speaking clock, only those alert, when signal drops.
It should check every minute.
What do I have to enable/disable for that?
And how to let it run, when my touch is sleeping?
Thanks!
I'm using a TyTN II. Great software.
Like to feedback that when I was using my bluetooth headset, when the phone is off (no display), announcing (audio) could be heard and vibration. When I don't use the bluetooth headset (bluetooth is off), and phone is off (no display), I don't hear any announcement and there is vibration only. If I turn on the phone now, I will hear the end part of the time announcement.
Is this normal?
Thanks.
zard said:
I'm using a TyTN II. Great software.
Like to feedback that when I was using my bluetooth headset, when the phone is off (no display), announcing (audio) could be heard and vibration. When I don't use the bluetooth headset (bluetooth is off), and phone is off (no display), I don't hear any announcement and there is vibration only. If I turn on the phone now, I will hear the end part of the time announcement.
Is this normal?
Thanks.
Click to expand...
Click to collapse
Zard .. if you enable the black me feature the speaking clock can be capable of walking up the device to say time at chosen theme points without walking up the screen. So i advice you to enable the blackme feature as long as the phone is in your pocket. if you are using the phone for an instance or a period of time you can disable the blackme feature since when you are using the phone the feature will be annoying.
in some devices (devices differ in reaction to wakeup) the phone cannot wake up to say the time if it is sleeping ,this is why i made the blackme feature. So the solution is to enable it.
Also if you go to programs menu in the start button you will see a pack on enable & diable features. you can choose what ever you like to enable and what to diable.this features can be clicked (enabled or disabled) & once confirmed you will notice that it will be active wherever any theme is choosen. iam sure that the blackme feature is able to walking up the device to say the time whether your device is in sleep or deep sleep.
kino-kino said:
This really sounds great - but how to use it?
I am no expert in programming or in mort scripting.......
I would like to use this feature: "you can set an action like signal check to work with Themes (feature to check signal strength every x time) if the signal drops ,it will announce you with an alarm ,this feature only works if the phone is on and the signal is less than 40%."
But no speaking clock, only those alert, when signal drops.
It should check every minute.
What do I have to enable/disable for that?
And how to let it run, when my touch is sleeping?
Thanks!
Click to expand...
Click to collapse
Kino-Kino .. first of all open the start menu programs ,you will find 2 folders ,one is named enable & the other named disable. now you are ready to open each and click what ever features you like to be enabled and whatever to be disabled.
At this time you are ready to go for the Theme selection which means at what intervals you want the choosen features to fire ,you can try the "01M" which means that the software will fire every 1 minute to execute the selected feature (or features if you choose others).
For example ,if you want only the signal detection feature ,go to disable folder and click all features to disable them all ,then go to enable and only click the shortcut named "Signal".
Once done .. every 1 minutes (since we choosed "01M") the phone will execute the selected feature (or features). in some phones the system cannot walkeup itself to execute the so called notification tasks at given times if it was in "Sleep" or "Deep Sleep Mode". So you can check your phone reaction to such notification tasks.
To make sure we are ready to go ,you must check first that your phone registry key when the phone is on and receiving signal looks like this :
[HKEY_LOCAL_MACHINE\System\State\Phone] the value of "Cellular System Available" must be 65
to do this test just download Fred Taskmanager free from this link
http://www.dotfred.net/TaskMgr.htm
once downloaded install it ,open it and go to RegEdit tab and go to [HKEY_LOCAL_MACHINE\System\State\Phone] & check for "Cellular System Available" number .. it must be (65) i mean the number between brackets.
If this is the case ,the program will correctly do the job. but if it isnt (may vary from phone to another) ,then this number must be modified in the software to read correctly ,Go to program installation folder " \Program Files\TamerSpClock\Data\Signal.mscr " rename the file "Signal.mscr" to "Signal.txt" then open it by any notepad or word ,then check the line "if(%PhoneActive% = 65)" and change the 65 to be like the number that you found for your phone in the normal signal state. Do not forget to rename it back once finished to "Signal.mscr".
Thanks
Thanks going to test on my lovly hima.
Thank You for Your reply!
I think, there could be a problem:
The reg key, You mentoned, does have different values.
If I am connected to a "GPRS" network, it is "1".
If I am connected to an "EDGE" network, it is "8".
And if only phone is active, but no internet-connection, it is "1".
So what should I take?
Thank You!
EDIT: There is another key called "Radio ready state" with the value "31".
And all value are "0" when radio is off.
kino-kino said:
Thank You for Your reply!
I think, there could be a problem:
The reg key, You mentoned, does have different values.
If I am connected to a "GPRS" network, it is "1".
If I am connected to an "EDGE" network, it is "8".
And if only phone is active, but no internet-connection, it is "1".
So what should I take?
Thank You!
EDIT: There is another key called "Radio ready state" with the value "31".
And all value are "0" when radio is off.
Click to expand...
Click to collapse
The reply is that you take the number between brackets on the idle state without conecting to any network ,because the idea as you can see from the code that there is 2 conditions must be fullfilled to fire the signal alarm which is 1- if the signal in the idle state be so and so and 2- in the same time signal drops to so and so ... Bingo ... fire
So ,now you got the idea of the code & can now modify it to fullfils your needs ,and you are ready to put your constants that reflects the state where you want spclock to fire. wishing this could help .....
timoz73 said:
Zard .. if you enable the black me feature the speaking clock can be capable of walking up the device to say time at chosen theme points without walking up the screen. So i advice you to enable the blackme feature as long as the phone is in your pocket. if you are using the phone for an instance or a period of time you can disable the blackme feature since when you are using the phone the feature will be annoying.
in some devices (devices differ in reaction to wakeup) the phone cannot wake up to say the time if it is sleeping ,this is why i made the blackme feature. So the solution is to enable it.
Also if you go to programs menu in the start button you will see a pack on enable & diable features. you can choose what ever you like to enable and what to diable.this features can be clicked (enabled or disabled) & once confirmed you will notice that it will be active wherever any theme is choosen. iam sure that the blackme feature is able to walking up the device to say the time whether your device is in sleep or deep sleep.
Click to expand...
Click to collapse
Thanks, with Blackme, it works now.
dont work with my diamond
great sharing.
thanx.
Dynomite232 said:
dont work with my diamond
Click to expand...
Click to collapse
Dynomite232 ,Kindly feedback whether the mortscript program didnt run on diamond or the TamerSpClock itself. i didnt expect this to happen from the Diamond of a VGA screen since my software didnt realy have a User Interface Menu ,its only shortcuts. In addition that Mort do support any windows mobile device.
Thanks again helping me, I think, I start to understand what Your mortscripts are able to do!
But I have to ask once more:
So I have three different scenarios, when I would get that signal-alert:
1 If Cellular Systam Available is "8" AND signal drops to less than 40%
and
2 If Cellular System Available is "1" AND signal drops to less than 40%
and
3 If Cellular System Available is "0" WITHOUT checking the signal strength
So would it be possible to edit the Mortscript this way?
Thank You!!
Reply to Kino-Kino
kino-kino said:
Thanks again helping me, I think, I start to understand what Your mortscripts are able to do!
But I have to ask once more:
So I have three different scenarios, when I would get that signal-alert:
1 If Cellular Systam Available is "8" AND signal drops to less than 40%
and
2 If Cellular System Available is "1" AND signal drops to less than 40%
and
3 If Cellular System Available is "0" WITHOUT checking the signal strength
So would it be possible to edit the Mortscript this way?
Thank You!!
Click to expand...
Click to collapse
Kinio-Kino for your described situation the case will be as follows (copy & paste what is below between the # signs to replace what is inside Signal.mscr ,you can find this file inside a folder called Data inside the program folder inside Program Files)
###################################################################
ErrorLevel ("syntax")
SignalStrength = RegRead("HKLM", "System\State\Phone", "Signal Strength" )
PhoneActive = RegRead("HKLM", "System\State\Phone", "Cellular System Available" )
if(%PhoneActive% = 0)
PlaySound "\Storage Card\Program Files\TamerSpClock\Wav\Signal.wav"
endif
if(%PhoneActive% = 8)
if (%SignalStrength% < 40 )
PlaySound "\Storage Card\Program Files\TamerSpClock\Wav\Signal.wav"
endif
endif
if(%PhoneActive% = 1)
if (%SignalStrength% < 40 )
PlaySound "\Storage Card\Program Files\TamerSpClock\Wav\Signal.wav"
endif
endif
###################################################################
You can now Download the latest version v1.03 ,I build a new user interface for this software instead of the icons .Before Uninstalling Do the process of "StopingAll" feature then make a new Install to v1.03.
.
Hi,
first, thank You again, its working now as expected, great!!
The new Version 1.3: Both cabs get installed to the main memory, maybe something went wrong with one of them?
And one more question:
When my phone is sleeping, I dont get those signal-alerts.
So You have Your blackme-feature:
How could I handle that, to get the hardware-buttons locked, when blackme is active? I have a HTC Touch.
Thank You!
kino-kino said:
Hi,
first, thank You again, its working now as expected, great!!
The new Version 1.3: Both cabs get installed to the main memory, maybe something went wrong with one of them?
And one more question:
When my phone is sleeping, I dont get those signal-alerts.
So You have Your blackme-feature:
How could I handle that, to get the hardware-buttons locked, when blackme is active? I have a HTC Touch.
Thank You!
Click to expand...
Click to collapse
kino-kino ,Welcome again & thank you for your feedback. The Cab file targeting the storage card have been updated in the main thread page.
you are asking now about 2 subjects ,the first one concerning the signal alert didnt fire during deep sleep of the phone ,i think you might try to make the speaking clock feature active along with the signal alert feature ,maybe it will wakeup your device to fire at the specified times, of course if its voice is annoying to you can try deleting the clock wav files but leave of course the signal.wav without deleting. I wonder this happens to you although my Htc Tytn wakeup and fire Signal Alerts at specified times.
The second question can be solved simply by downloading "HomeScreenPluPlus" from the following link:
http://www.chi-tai.info/cs_batterystatus_xda_neo_wm5_im_cs.htm#Download
This software is free and have a feature in the second UI page of options that lock your device when the screen is off and vice versa ,see this pic for explanation.
Thanks for your great app, but I have troubles with BlackMe feature. If this feature is disable, my phone doesn't speak, vibrate only. But if it's enable, it turn off the phone screen when speaking time. That's annoy when I'm doing something on my phone, especially while downloading a large file, it interrupts the wifi connection and I have to re-download from beginning. Any solution for that?
hung_ng said:
Thanks for your great app, but I have troubles with BlackMe feature. If this feature is disable, my phone doesn't speak, vibrate only. But if it's enable, it turn off the phone screen when speaking time. That's annoy when I'm doing something on my phone, especially while downloading a large file, it interrupts the wifi connection and I have to re-download from beginning. Any solution for that?
Click to expand...
Click to collapse
yes i know hung_ng ,i made the blackme feature as a separate item in folder links so that you can assign its icon to a hardware button to be easily accessed so that when you are using your phone you can easily deactivate BlackMe.
This annoying feature (from my point of view as you eaxactly) is essential in many phones ,as the system cannot wakeup the device from a deep sleep to do the choosed actions. the blackme feature (also known as "ToggleDisplay=1") force the phone to wakeup to fire the action. if it is disabled many devices will fall in deepsleep without being able to wakeup. the last version 1.3 have this separate shortcut that i explained.
Another idea i made in my Tytn and made me feel comfortable is that i made my telephone sense when a specific window is open ,the blackme is disabled automatically and when i close this window it reverts automatically to be enabled. for example i made RescoExplorer2007 window when it is opened the blackme is disabled & serving me while i work ,and once i finish i close Resco and automatically blackme returns active and conserving my battery life.
Sorry for being long in my explanation but if you are interested in the idea ,i can make a version for you that is capable of deactivating BlackMe once a specific window is opened. i am not a programer ,i am an Architectural Engineer that once upon a time needed this software and didnt find a really satisfying one available all over the internet ,so i decided to learn Mort Script and i write a one satisfiying my needs and by the way i think that it might help other people who might need it as me.
Hey guys, my first real contribution here. I was using the Cell Broadcast solution with a today plugin posted here.
I had two major issues:
1. With Manila, can not use another today plugin
2. Need to use S2U2 because waking up of device, otherwise device stays on for sometime and screen touches are registered.
I played a bit with the registry and found out that setting two keys will reliably set a string which would be used for the operator name hence changing the string in Manila, dialer, etc.
I intercepted the messages coming from "Network" and extracted the CB body, if the device has been on for less than 5 seconds, then I assume that the cause of wake up was the CB, hence I suspend the device, its working quite nicely for now, will need your feedback for a probable general working release this weekend.
To do / Known Issues:
- FIXED: One key is hard coded as 41006 (my operator code), need to get it from phone. Otherwise ask user for it.
- Configurable from field, "Network*" is hard coded for now.
- Autostart using Init registry
- Hide / Remove UI
- For now UI shows incoming CB messages, power events, time difference between power on and message incoming for deciding to suspend or not.
Hello. I did search on this topic too. but did not find anything else that you do. but exactly what does not work. I got a newer version? thanks
ANyone please help. My BA's Touchscreen is cracked and not functioning anymore. But for now i need to use it. When sending SMS i have to touch or press the Send button from the touch screen. But since my screen doesnt work anymore, is there a way like assigning the "Send" button into the hardware key?
Or is there any application that can do this? Anyone please help!
Thanks in advance!
hi
what do u mean cracked?there is a picture and there is no tap action?or there is no picture and response anymore?there is like damage in lcd like un usual colors and rabush and lines?because may be if u change the rom or re-upgrading the rom,may be the problem fixed,specially in minor problems.
i think u cannot send msgs without tap action.
there is a crack, display is okay, but touch response is not fuctioning well, the only thing i notice is that, when i press on the right bottom most of the screen, sometime touch works and sometimes not works. I been trying to do the Align screen method but doesnt work. i think it is the hardware problem.
if that sms is really that important to you, you can always connect the device to the pc and when connected to activesync a nice little freeware called "my mobiler" can be used to control the device with the pc's mouse and keyboard and gets the device's screen on your pc screen. it can be downloaded here:
http://www.mymobiler.com/
but after bypassing the problem for now, we should focus on getting the thing fixed. you could answer homam_france's questions to help us determine what exactly went wrong and maybe you don't need to bypass then anymore but can solve the problem!
EDIT: ignore the request for more information, you already answered while i was writing this
@Chef_Tony
Thank you, but that is what I am doing right now. But my problem is that when i am not in from of my pc and I need to send important sms? Maybe there is a software that can map the Send softkey to hardware key.
Thanks again!
you could try this program:
http://classic.pocketgear.com/software_detail.asp?id=21070
there is a trial version there, and if you can install, start and control that program without the use of the touch screen, or from your pc, maybe you can tell it to for example, map the left softkey with the mail hardware key or something like that, i haven't tested it. if that prog is not right, on the bottom of that page there is a link for related applications, maybe one of those helps you.
if, however, the remapping of the keys does not work, for a different sms application, you could try:
iwindowsmobile sms chat:
http://iwindowsmobile.com/threaded-sms-messaging.html
visual it simple sms:
http://www.visualit.co.uk/PocketPC/simplesms_V5.htm
or this one:
http://www.mobileflipper.com/mobile-tips/sms-application-for-windows-mobile-50-60-and-61/
maybe their way of hitting the send button is different and works for your device.
by the way, on any normal mobile phone, you can also send an sms by pressing the green call button, unfortunately, ppc phones don't do that.
greetz
Chef_Tony
Why don't you just go to Setting/Personal/Buttons and map a button to "<Left Softkey>"
Thanks to everyone
Thanks to you all. I finally got a chance to fix my touch screen. not bad at all. except that i forgot to right fit the volume hardware keys.
Be very careful with the Volume key, if you don't close the case wright, you might broke the switch (a little switch on the mainboard that is moved by the volume key). Just make shure it's in the wright place when closing the case
Hi to all.
What can I do in case the ba is working, the screen is perfect but no more touch? it's a os 5.2.1933(18533.0.7.0)
thanks
that can happen but it has probably nothing to do with the rom. it means that the digitizer is broken and you need to look for a new one, maybe a good ebay search or a post in xda's marketplace could help you
thanks 4 the reply. Do you mean a new lcd screen?
no, just the digitizer, it is the see through touch panel on top on the actual display, maybe you are lucky and find a cheap one, as you don't need a new screen.
you can buy a new digitizer on dealextreme.com, i recall a few months ago they were selling the digitizers for Blueangel devices, its very easy to disassemble the BA & replace it. Good luck.
BA Screen alignment settings at HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH
Can any of the members pl. post the screen alignment settings available at Registry entry Screen alignment settings for BA and/or variants at HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH
Value Name: CalibrationData
Value data:
? (5 sets of data)
Value type: REG_SZ
Value Name: MaxCalError
Value Data: ?
Base : Decimal
Value type: REG_DWORD
With these values most of the BA devices with defective touch screen can become functional to large extent.
Actually we can add the values to the BA Wiki
Regards
here's the CalibrationData:
17 154,258 154,788 865,785 859,262
i dont have a MaxCalError key.
Good luck,
dtd
Hi DTD,
Thanks for the prompt reply. Pl. verify the data provided by you as it doesnt seem to have the 5 sets for the CalibrationData values & repost correctly.
Thanks in advance
Regards