Is there any way to get it so that the device lock (pin lock) can be disabled when connected to ActiveSync or a charger? If I have the phone in the car it locks after a time, which is a real bore.
Maybe there is a registry entry for the delay before locking and this can be changed using a program (activated by keystore / button pressing)?
Any ideas most usefull, as I need to have the pin in place as the Prophet is a minefield of information!
same problem !!!!
the device lock it self during when i try to take good shot be camera !!!
so i need to enter the password to i can back again to camera
if only the device lock it self when i turn it off like window 2003
this will be great
Posted from another Pocket PC / Smartphone website, i have applied it to my phone but not been able to test it yet....
1. Get a registry editor (I used minied of sourecforge.net, because its opensource, but there are many others available)
2. Go to the following key:
HKEY_LOCAL_MACHINE\Comm\Security\LASSD\AE\{50C13377-C66D-400C-889E-C316FC4AB374}
- The value called AEFrequencyType will be 1. Change it to 2.
- Ensure the value called AEFrequencyValue is 0
Exit the editor and reset the device.
From now the device should only lock to the password screen when the power shuts off, as per pre-AUK2 behaviour.
Note that if you go in to the lock settings screen, it will try to change the AEFrequencyType value back to 1. Also, this will *not* work if you have an Exchange 2003 enforced policy for this setting active. The policy will overwrite it.
Thanks for that
I will give it a try and see what happens.
Works like a dream!
Brilliant. Thanks for the reg hack. Brilliant and works a treat. Now, whenever the mobile is connected to ActiveSync or charging, no pin lock.
Glad to be of service, thanks for letting me know it works.
Here is the command line flight mode on/off/toggle utility.
Command lines to switch on and off
Code:
\Program Files\rk-FltMode\rk-FltMode.exe on
\Program Files\rk-FltMode\rk-FltMode.exe off
\Program Files\rk-FltMode\rk-FltMode.exe toggle
Developed to support rk-Sleep/rk-Location switch applications but could be used anywhere!
Note: This application requires Compact Framework 2.0
You need compact framework 2.0 installed inorder to run this application. The compact framework is already part of WM6, so if your device is WM6 skip this step. But most of the WM5 devices do not have this update. So you must download here and run the installation on your desktop (then active sync to update your device). Only after completing this step install the application.
Download from here
Rajesh,
Thanks for adding the toggle funtion. Is there a way to assign either a soft or hardware button to the toggle funtion. Thank you for the help, I am not that familiar with command line stuff. Any help would be appreciated.
so, it is more or less like vijay's phone toggle?
http://www.vijay555.com/?Releases:VJPhoneToggle
christopher L said:
Rajesh,
Thanks for adding the toggle funtion. Is there a way to assign either a soft or hardware button to the toggle funtion. Thank you for the help, I am not that familiar with command line stuff. Any help would be appreciated.
Click to expand...
Click to collapse
Yes christopher, You need to create a shortcut to 'rk-FltMode.exe' with the command line as specified in the first post
e.g
Code:
\Program Files\rk-FltMode\rk-FltMode.exe toggle
You can use resco explorer or any freeware application available to create the shortcut.
nothin said:
so, it is more or less like vijay's phone toggle?
http://www.vijay555.com/?Releases:VJPhoneToggle
Click to expand...
Click to collapse
This is basically flight mode on/off switch.. I am not sure if vijay's phone toggle doing the same. But looks like vijay's phone tool is to close the phone application if running. But I am not 100% sure
I am not getting something. I went to /program files/rk-fltmode and in that file there is an exe that goes to your program. I made a shortcut and named it" rk-fltmode.exe TOGGLE". WHen I click on it it takes me to your program but that is it. Could you please give me a step by step instructions please.
I have the at&t tilt if that helps. Thanks in advance.
christopher L said:
I am not getting something. I went to /program files/rk-fltmode and in that file there is an exe that goes to your program. I made a shortcut and named it" rk-fltmode.exe TOGGLE". WHen I click on it it takes me to your program but that is it. Could you please give me a step by step instructions please.
I have the at&t tilt if that helps. Thanks in advance.
Click to expand...
Click to collapse
The shortcut name can be anything...
You need to right click on the shortcut you created.. and choose properties from the context menu
From the window displayed choose the tab 'Shortcut'
now edit the Target as follows
\Program Files\rk-FltMode\rk-FltMode.exe toggle
Click Ok on the top
Now tap on the shortcut you created it should toggle the flighmode for you...
If not let me know i will send you the shortcut
Thank You, I finally was able to make it work. On the Tilt though it only turns off the Cell radio, it doesn't accually put it in flight mode. but it works for my purpose. Again thank you for al the hard work.
christopher L said:
Thank You, I finally was able to make it work. On the Tilt though it only turns off the Cell radio, it doesn't accually put it in flight mode. but it works for my purpose. Again thank you for al the hard work.
Click to expand...
Click to collapse
Yes it is infact phone on/off ...Not technically flight mode...I need to change the name of the program
Nice work.
Only one question: Is it possible to enter the security pin automatically?
magnus48 said:
Nice work.
Only one question: Is it possible to enter the security pin automatically?
Click to expand...
Click to collapse
Can you tell me what exactly is the 'Security Pin' Is it a sim lock?
Let me know so that I can check on that
Yes it's the sim lock.
In wm6, you can find it at Start -> Settings -> Phone (requiere PIN when phone is used)
There is an VERY old app by HTC that also switches on/off the GSM Radio (ie NO real flight mode) I am using it for years now. Packaged it into my own cab.
It has a very small memory footprint (5.5Kb, no frameworks needed!) and usage is easy: Star the program (the cab puts a link in Startmenu/programs) to togle the radio status.
magnus48 said:
Yes it's the sim lock.
In wm6, you can find it at Start -> Settings -> Phone (requiere PIN when phone is used)
Click to expand...
Click to collapse
Security PIN is NOT the same as SIM Lock.
The security PIN is the code you have to supply when you want to use your SIM (ie when the GSM radio is switched on).
You can disable the security PIN like mentioned above.
SIM ock is something else: It prevents you to use SIM's from other networks than the device is locked to. You need an unlock code from your network operator or from www.imei-check.co.uk (you might have to pay for that) OR use some specific software to get rid of the SIM lock (search the forum if there is such software available for your device).
I can't disable. I have a dual SIM. One pin is for personal use and the other one for business...
Of course you can disable the ecurity PIN, but maybe you don't want to...
BTW: For some dual SIM adaptors (like my 15th gen) you have to disable PIN security!
edsub said:
Of course you can disable the security PIN, but maybe you don't want to...
BTW: For some dual SIM adaptors (like my 15th gen) you have to disable PIN security!
Click to expand...
Click to collapse
How do you select the sim to make the calls?
## TamerSpClock v1.4 ##
Last update 13 Dec 2008
"TamerSpClock" is a Windows Mobile 2003/5/6 software which lets you take hand over your time to the max. It is a fully customizable speaking clock & a chimer.
- you can choose a THEME of time intervals of 1 ,5 ,15 ,30 or 60 minutes ,Then you can choose actions to be done on these choosen theme intervals.
- you can adjust when to speak time or chime and when to mute in a way that differs from other programs by means that you can set multi portions (intervals) of time that mute the program automatically for daily use. you can access the file "Validity.ini" found in the folder named "settings" inside the program installation path. this file can be edited by any notepad or word (pocket or pc word) then you can specify at what hours to work on and what to mute (just Change validity = 0 corresponding to hours that needed to be muted & Change validity = 1 to the rest of the hours).
- The program can wake up the device without waking up your screen conserving your battery life and will chime even if the ppc is sleeping or in a deep sleep, The software have a feature that can force the screen not to wakeup (BlackMe feature) at chiming times or (if you choose to) to leave it to the current windows mobile configurations (settings) to decide ,this is useful for some ppc that wakeup the display on every chime which may have negative results on battery life.
- you can put your own wav files to be chimed ,just insert them in folder "Wav" found inside installation directory but use the same names of course.
- This software differs from other similar products in that if you choose for example 15 minute iterval for speaking the clock ,it wll activate itself and speak time on whole miute numbers like 15-30-45-60 and will not just repeat the choosen interval starting from the time you switched it on which results in speaking times like 4:52 and 7:27 etc.
- you can choose or omit salutations like "the time is" & "Am ,Pm" & saying "Oclock" at the whole number hours. this can be customized using the provided links to enable and disable the action features.
- you can choose whether to use vibration or no with the chiming process.
- you can stop all software processing events by one finger click.
- Software will automaticaly activate itself and work again after any restart of the device.
- you can set an action like signal check to work with Themes (feature to check signal strength every x time) if the signal drops ,it will announce you with an alarm ,this feature only works if the phone is on and the signal is less than 40%.
- you can set an action like Zekr which can help Muslims remember their Lord every 5 minutes with a low volume sound saying God is the most Great. This option acts solely without dependency of the choosen theme interval since it have a fixed firing every 5 minutes (take it or leave it).
# How to install Cab file of TamerSpClock:
1- For versions prior to v1.4 you must download MortScript from the following link
(Version v1.4 & above already have it embedded inside software)
http://www.sto-helit.de/index.php?mo...=view&entry=65
This software acts like an environment for "TamerSpClock" to work. please note that "TamerSpClock" cannot run without installing this software.
2- Transfer cab to any place on your ppc using active sync or any other communicating software.
3- Choose whether to install to Device or to MemoryCard ,It is very important to choose the installation target location during the setup process corresponding to the version you downloaded whether it is on memory card or on phone. Note that program is hard coded ,this is why this point is very important for the program to work.
4-For Version v1.4 & above before running program ,press the icon named "RunFirst" prior to run the program (This acts as if MortScript Cab is installed)
This software had been tested on HTC Tytn & found stable ,Also can work on any windows mobile device.
I have been looking for an hourly chimer that does not wake up the screen. The disappointing thing about this one it it is hard coded to run from the storage card. Can this be modified to use variable paths?
One issue I have with installing to the storage card is Windows Mobile unmounts the card to save power on some devices. I also change my card based on what I am doing. I keep my maps on one card and my MP3s on another.
painter_ said:
I have been looking for an hourly chimer that does not wake up the screen. The disappointing thing about this one it it is hard coded to run from the storage card. Can this be modified to use variable paths?
One issue I have with installing to the storage card is Windows Mobile unmounts the card to save power on some devices. I also change my card based on what I am doing. I keep my maps on one card and my MP3s on another.
Click to expand...
Click to collapse
Added 2 versions ,one if you want to setup on the Phone Main Memory & the other for Storage Card.
This really sounds great - but how to use it?
I am no expert in programming or in mort scripting.......
I would like to use this feature: "you can set an action like signal check to work with Themes (feature to check signal strength every x time) if the signal drops ,it will announce you with an alarm ,this feature only works if the phone is on and the signal is less than 40%."
But no speaking clock, only those alert, when signal drops.
It should check every minute.
What do I have to enable/disable for that?
And how to let it run, when my touch is sleeping?
Thanks!
I'm using a TyTN II. Great software.
Like to feedback that when I was using my bluetooth headset, when the phone is off (no display), announcing (audio) could be heard and vibration. When I don't use the bluetooth headset (bluetooth is off), and phone is off (no display), I don't hear any announcement and there is vibration only. If I turn on the phone now, I will hear the end part of the time announcement.
Is this normal?
Thanks.
zard said:
I'm using a TyTN II. Great software.
Like to feedback that when I was using my bluetooth headset, when the phone is off (no display), announcing (audio) could be heard and vibration. When I don't use the bluetooth headset (bluetooth is off), and phone is off (no display), I don't hear any announcement and there is vibration only. If I turn on the phone now, I will hear the end part of the time announcement.
Is this normal?
Thanks.
Click to expand...
Click to collapse
Zard .. if you enable the black me feature the speaking clock can be capable of walking up the device to say time at chosen theme points without walking up the screen. So i advice you to enable the blackme feature as long as the phone is in your pocket. if you are using the phone for an instance or a period of time you can disable the blackme feature since when you are using the phone the feature will be annoying.
in some devices (devices differ in reaction to wakeup) the phone cannot wake up to say the time if it is sleeping ,this is why i made the blackme feature. So the solution is to enable it.
Also if you go to programs menu in the start button you will see a pack on enable & diable features. you can choose what ever you like to enable and what to diable.this features can be clicked (enabled or disabled) & once confirmed you will notice that it will be active wherever any theme is choosen. iam sure that the blackme feature is able to walking up the device to say the time whether your device is in sleep or deep sleep.
kino-kino said:
This really sounds great - but how to use it?
I am no expert in programming or in mort scripting.......
I would like to use this feature: "you can set an action like signal check to work with Themes (feature to check signal strength every x time) if the signal drops ,it will announce you with an alarm ,this feature only works if the phone is on and the signal is less than 40%."
But no speaking clock, only those alert, when signal drops.
It should check every minute.
What do I have to enable/disable for that?
And how to let it run, when my touch is sleeping?
Thanks!
Click to expand...
Click to collapse
Kino-Kino .. first of all open the start menu programs ,you will find 2 folders ,one is named enable & the other named disable. now you are ready to open each and click what ever features you like to be enabled and whatever to be disabled.
At this time you are ready to go for the Theme selection which means at what intervals you want the choosen features to fire ,you can try the "01M" which means that the software will fire every 1 minute to execute the selected feature (or features if you choose others).
For example ,if you want only the signal detection feature ,go to disable folder and click all features to disable them all ,then go to enable and only click the shortcut named "Signal".
Once done .. every 1 minutes (since we choosed "01M") the phone will execute the selected feature (or features). in some phones the system cannot walkeup itself to execute the so called notification tasks at given times if it was in "Sleep" or "Deep Sleep Mode". So you can check your phone reaction to such notification tasks.
To make sure we are ready to go ,you must check first that your phone registry key when the phone is on and receiving signal looks like this :
[HKEY_LOCAL_MACHINE\System\State\Phone] the value of "Cellular System Available" must be 65
to do this test just download Fred Taskmanager free from this link
http://www.dotfred.net/TaskMgr.htm
once downloaded install it ,open it and go to RegEdit tab and go to [HKEY_LOCAL_MACHINE\System\State\Phone] & check for "Cellular System Available" number .. it must be (65) i mean the number between brackets.
If this is the case ,the program will correctly do the job. but if it isnt (may vary from phone to another) ,then this number must be modified in the software to read correctly ,Go to program installation folder " \Program Files\TamerSpClock\Data\Signal.mscr " rename the file "Signal.mscr" to "Signal.txt" then open it by any notepad or word ,then check the line "if(%PhoneActive% = 65)" and change the 65 to be like the number that you found for your phone in the normal signal state. Do not forget to rename it back once finished to "Signal.mscr".
Thanks
Thanks going to test on my lovly hima.
Thank You for Your reply!
I think, there could be a problem:
The reg key, You mentoned, does have different values.
If I am connected to a "GPRS" network, it is "1".
If I am connected to an "EDGE" network, it is "8".
And if only phone is active, but no internet-connection, it is "1".
So what should I take?
Thank You!
EDIT: There is another key called "Radio ready state" with the value "31".
And all value are "0" when radio is off.
kino-kino said:
Thank You for Your reply!
I think, there could be a problem:
The reg key, You mentoned, does have different values.
If I am connected to a "GPRS" network, it is "1".
If I am connected to an "EDGE" network, it is "8".
And if only phone is active, but no internet-connection, it is "1".
So what should I take?
Thank You!
EDIT: There is another key called "Radio ready state" with the value "31".
And all value are "0" when radio is off.
Click to expand...
Click to collapse
The reply is that you take the number between brackets on the idle state without conecting to any network ,because the idea as you can see from the code that there is 2 conditions must be fullfilled to fire the signal alarm which is 1- if the signal in the idle state be so and so and 2- in the same time signal drops to so and so ... Bingo ... fire
So ,now you got the idea of the code & can now modify it to fullfils your needs ,and you are ready to put your constants that reflects the state where you want spclock to fire. wishing this could help .....
timoz73 said:
Zard .. if you enable the black me feature the speaking clock can be capable of walking up the device to say time at chosen theme points without walking up the screen. So i advice you to enable the blackme feature as long as the phone is in your pocket. if you are using the phone for an instance or a period of time you can disable the blackme feature since when you are using the phone the feature will be annoying.
in some devices (devices differ in reaction to wakeup) the phone cannot wake up to say the time if it is sleeping ,this is why i made the blackme feature. So the solution is to enable it.
Also if you go to programs menu in the start button you will see a pack on enable & diable features. you can choose what ever you like to enable and what to diable.this features can be clicked (enabled or disabled) & once confirmed you will notice that it will be active wherever any theme is choosen. iam sure that the blackme feature is able to walking up the device to say the time whether your device is in sleep or deep sleep.
Click to expand...
Click to collapse
Thanks, with Blackme, it works now.
dont work with my diamond
great sharing.
thanx.
Dynomite232 said:
dont work with my diamond
Click to expand...
Click to collapse
Dynomite232 ,Kindly feedback whether the mortscript program didnt run on diamond or the TamerSpClock itself. i didnt expect this to happen from the Diamond of a VGA screen since my software didnt realy have a User Interface Menu ,its only shortcuts. In addition that Mort do support any windows mobile device.
Thanks again helping me, I think, I start to understand what Your mortscripts are able to do!
But I have to ask once more:
So I have three different scenarios, when I would get that signal-alert:
1 If Cellular Systam Available is "8" AND signal drops to less than 40%
and
2 If Cellular System Available is "1" AND signal drops to less than 40%
and
3 If Cellular System Available is "0" WITHOUT checking the signal strength
So would it be possible to edit the Mortscript this way?
Thank You!!
Reply to Kino-Kino
kino-kino said:
Thanks again helping me, I think, I start to understand what Your mortscripts are able to do!
But I have to ask once more:
So I have three different scenarios, when I would get that signal-alert:
1 If Cellular Systam Available is "8" AND signal drops to less than 40%
and
2 If Cellular System Available is "1" AND signal drops to less than 40%
and
3 If Cellular System Available is "0" WITHOUT checking the signal strength
So would it be possible to edit the Mortscript this way?
Thank You!!
Click to expand...
Click to collapse
Kinio-Kino for your described situation the case will be as follows (copy & paste what is below between the # signs to replace what is inside Signal.mscr ,you can find this file inside a folder called Data inside the program folder inside Program Files)
###################################################################
ErrorLevel ("syntax")
SignalStrength = RegRead("HKLM", "System\State\Phone", "Signal Strength" )
PhoneActive = RegRead("HKLM", "System\State\Phone", "Cellular System Available" )
if(%PhoneActive% = 0)
PlaySound "\Storage Card\Program Files\TamerSpClock\Wav\Signal.wav"
endif
if(%PhoneActive% = 8)
if (%SignalStrength% < 40 )
PlaySound "\Storage Card\Program Files\TamerSpClock\Wav\Signal.wav"
endif
endif
if(%PhoneActive% = 1)
if (%SignalStrength% < 40 )
PlaySound "\Storage Card\Program Files\TamerSpClock\Wav\Signal.wav"
endif
endif
###################################################################
You can now Download the latest version v1.03 ,I build a new user interface for this software instead of the icons .Before Uninstalling Do the process of "StopingAll" feature then make a new Install to v1.03.
.
Hi,
first, thank You again, its working now as expected, great!!
The new Version 1.3: Both cabs get installed to the main memory, maybe something went wrong with one of them?
And one more question:
When my phone is sleeping, I dont get those signal-alerts.
So You have Your blackme-feature:
How could I handle that, to get the hardware-buttons locked, when blackme is active? I have a HTC Touch.
Thank You!
kino-kino said:
Hi,
first, thank You again, its working now as expected, great!!
The new Version 1.3: Both cabs get installed to the main memory, maybe something went wrong with one of them?
And one more question:
When my phone is sleeping, I dont get those signal-alerts.
So You have Your blackme-feature:
How could I handle that, to get the hardware-buttons locked, when blackme is active? I have a HTC Touch.
Thank You!
Click to expand...
Click to collapse
kino-kino ,Welcome again & thank you for your feedback. The Cab file targeting the storage card have been updated in the main thread page.
you are asking now about 2 subjects ,the first one concerning the signal alert didnt fire during deep sleep of the phone ,i think you might try to make the speaking clock feature active along with the signal alert feature ,maybe it will wakeup your device to fire at the specified times, of course if its voice is annoying to you can try deleting the clock wav files but leave of course the signal.wav without deleting. I wonder this happens to you although my Htc Tytn wakeup and fire Signal Alerts at specified times.
The second question can be solved simply by downloading "HomeScreenPluPlus" from the following link:
http://www.chi-tai.info/cs_batterystatus_xda_neo_wm5_im_cs.htm#Download
This software is free and have a feature in the second UI page of options that lock your device when the screen is off and vice versa ,see this pic for explanation.
Thanks for your great app, but I have troubles with BlackMe feature. If this feature is disable, my phone doesn't speak, vibrate only. But if it's enable, it turn off the phone screen when speaking time. That's annoy when I'm doing something on my phone, especially while downloading a large file, it interrupts the wifi connection and I have to re-download from beginning. Any solution for that?
hung_ng said:
Thanks for your great app, but I have troubles with BlackMe feature. If this feature is disable, my phone doesn't speak, vibrate only. But if it's enable, it turn off the phone screen when speaking time. That's annoy when I'm doing something on my phone, especially while downloading a large file, it interrupts the wifi connection and I have to re-download from beginning. Any solution for that?
Click to expand...
Click to collapse
yes i know hung_ng ,i made the blackme feature as a separate item in folder links so that you can assign its icon to a hardware button to be easily accessed so that when you are using your phone you can easily deactivate BlackMe.
This annoying feature (from my point of view as you eaxactly) is essential in many phones ,as the system cannot wakeup the device from a deep sleep to do the choosed actions. the blackme feature (also known as "ToggleDisplay=1") force the phone to wakeup to fire the action. if it is disabled many devices will fall in deepsleep without being able to wakeup. the last version 1.3 have this separate shortcut that i explained.
Another idea i made in my Tytn and made me feel comfortable is that i made my telephone sense when a specific window is open ,the blackme is disabled automatically and when i close this window it reverts automatically to be enabled. for example i made RescoExplorer2007 window when it is opened the blackme is disabled & serving me while i work ,and once i finish i close Resco and automatically blackme returns active and conserving my battery life.
Sorry for being long in my explanation but if you are interested in the idea ,i can make a version for you that is capable of deactivating BlackMe once a specific window is opened. i am not a programer ,i am an Architectural Engineer that once upon a time needed this software and didnt find a really satisfying one available all over the internet ,so i decided to learn Mort Script and i write a one satisfiying my needs and by the way i think that it might help other people who might need it as me.
hellow i have windows mobile 6.1 wwe rom 1.5.6.4010
the first issue is about the bluetooth . when i receive a file the device tells me that the file transfer succeed and ask me if i want to keep it..i say yes but where the hell it keeps the files??
i dont have the option to choose where i want the file be kept..and i cant find it anywhere... so where i can find the received files? can i change someway the destanation folder? i looked in all settings of bluetooth and find nothing...
the secnod issue -Talk Summary -how can i Set the device that at the end of the conversation to show me how long I talked?
third- How do I prevent the device light up all the time during the conversation?
fourth- my operator (pelephone) does not shown in the connection setup and the result is very annoying connection error message every 5 seconds..message that says my operator not not exist and i need to turn to my operator provider
it shows me only CELLCOM and Orange but no pelephone...
final-how can i clean the main screen wallpaper from all the Unnecessary Messages like -New Voicemail and the Calendar? i looked all over the phone to fine the option with no luck...
please help me out guys ..
nikoooo said:
hellow i have windows mobile 6.1 wwe rom 1.5.6.4010
the first issue is about the bluetooth . when i receive a file the device tells me that the file transfer succeed and ask me if i want to keep it..i say yes but where the hell it keeps the files??
i dont have the option to choose where i want the file be kept..and i cant find it anywhere... so where i can find the received files? can i change someway the destanation folder? i looked in all settings of bluetooth and find nothing...
the secnod issue -Talk Summary -how can i Set the device that at the end of the conversation to show me how long I talked?
third- How do I prevent the device light up all the time during the conversation?
fourth- my operator (pelephone) does not shown in the connection setup and the result is very annoying connection error message every 5 seconds..message that says my operator not not exist and i need to turn to my operator provider
it shows me only CELLCOM and Orange but no pelephone...
final-how can i clean the main screen wallpaper from all the Unnecessary Messages like -New Voicemail and the Calendar? i looked all over the phone to fine the option with no luck...
please help me out guys ..
Click to expand...
Click to collapse
1. it is store at my device/my documents
2.if u r using s2u2, it will show at the end of the conversation. But for only 1-2secs. If you want to check, you can go to Call History to see.
3.Rightfully, the device light sensor(beside the speaker) will automatically put the screen on off when u place ur ear against the phone. If not, u call press briefly once on the power button at the top to off ur screen.
4.Not sure. Mayb u can try manual network selection instead of auto (Phone settings > Network)
5.Not sure what you meant. But you can dismiss those notifications from the home page.
Hopefully it helps.
thanks for the replay buddy
1. i found the folder .. thanks alot :]
2.unerstood ..im using this applicaion but it dosent show me that but never mind ..
3. even if i press the power button after few seconds it still lights up every moment when is speak and my ear touch and press few buttons which is very disturbing
if i will buy Headphones and will talk with them it not will light up ?
4.not works still the same
5.i meant the 3d touch flo home screen ..the messages that shown under the clock ..i want the home screen show only the clock and nothing under it ...it is possible?
how can i do that
thanks alot
3.Call your operator and edit internet settings manually.
4. Install this "Touch InCall Screen Tweak Config"
5.Try this