Hey guys, fresh meat in this forum, not quite new to Windows Mobile but very new to using it in a PDA with phone capabilities. Quite Symbian guy and sort of getting myself used to WM6 - and in love with Hermes...
I have just done a successful installation of Schap's 4.31 WM6 Rom - which I think is freaking great - when trying to make the VoIP work, I managed to get username, password and settings from Truphone account out of my N95 but I am not 100% sure I have put the right data in the right fields, result is that VoIP will not work at all and when I try to access the VoIP Settings (in the connections tab) it'll come up with a message "An unexpected error has ocurred in VoIPSettings.exe. Select Quit and then restart this program, or select Details for more information". Obviously I've done it a few times.
Help is more than appreciated.
Excuse me for my bad English.
I had the same problem and I deleted the file with my SIP configuration and then no problem :
File to delete :
Windows\System\VoIP\Prov0SIPSettings (it is an hidden file)
I have make this on a P4550 device with Schap's Rom. Perhaps is it the same thing...
Thanks
Thanks for this ! it worked for me as well.
Related
Hi,
I've got an Orange M500, upgraded with the Imate ROM 1.12.00WWE - ever since I upgraded the ROM, I can connect to my Orange GPRS service fine, however, if I disconnect then try to reconnect again, the connection fails. I have to turn on flight mode, then turn on the radio again in order to get GPRS access.
I've tried upgrading to Radio 1.13.00, but still no joy.
Any ideas?
Mine does that and I have the original ROM. A bit of a pain isn't it.
Here's the fix
This was originally posted by Peter for the imate JAM.
I just installed it and it's working like a charm.
1. Download the older version of caller-id from:
ftp://xda:[email protected]/BlueAngel/CAB_Files/Caller ID/IA_CallerID_1.20_WWE.CAB
and transfer it over to your device. Any directory is Ok. I used ActiveSync to put it into the My Documents folder.
2. Remove the file IA_CD-Startup.exe from \Windows\Startup on your device.
3. Rename iacontacts.dll to something else (e.g. old-iacontacts.dll). This file is in the \Windows directory of your device but is hidden. However you can rename it using your PC. Open Windows explorer, and navigate to Mobile Device>My PocketPC>Windows.
4. Rename displayCID.dll to something else (e.g. old-displayCID.dll). Access it via your PC the same as for the previous step.
5. Soft reset
6. Run the CAB file on the device - just tap on it.
7. Soft reset.
That should do it.
I have the same GPRS problem too. However, the link you provided just asked for the password to access that ftp. Hey, acs540, do you know the password or do you have that CAB file? Thanks in advance.
usernameassword is xda:xda
The fix in this post seems to refer to caller id!?! I too get the gprs connection problem and have made it better with different roms but not found a sure-fire fix.
If anyone has a patch that fixes this, please post it!
GPRS now working
Hi,
Finally I tried, or at least halfway, After I removed the CallerID everyone is talking about my Qtek9090 now works flawless regarding GPRS.
This is very interesting that Caller ID software makes GPRS not working
Anyway, now I can start and stop GPRS several times, I have now toggled it 10 times without any problem.
Before I had to reset/toggle radio to make it reconnect after a disconnect.
Thank you all that has investigated this problem!
One last thing, Do you really need CallerID? :roll:
Br
Lars
I don't use Caller_ID, but Photo Contacts Pro.
Did you also try to change GPRS slot (Class 8 or Class 10) in GPRS settings?
XShell said:
I don't use Caller_ID, but Photo Contacts Pro.
Did you also try to change GPRS slot (Class 8 or Class 10) in GPRS settings?
Click to expand...
Click to collapse
Well, yes, I have changed to Class8 (4R1T), default was (I belive) Class10
Br
Lars
Hi all,..
I would like to know if it is possible to use the WM6 internet sharing on a official T-Mobile NL WM5 ROM.
Is there a (working) CAB file or something?
Regards
A.
Just copy the files to the Windows folder and create a shortcut under Start Menu>Programs>whatever folder you want.
Try this. Let us know if it works.
---
Well,..
same error. I've recently tried the CAB file from an earlier post (maybe the same one as this one),...and get the error:
INTShRUI.exe is not a Valid PocketPC application.
please advice...
regards
A.
Cheers, been looking for this
Thanks for that, have been looking for this app. for awhile now.
Softbank X01HT (Hermes) ROM contains those files, but reports "IntShrUI.exe is not a valid Pocket PC Application" when executed. The files on the X01HT ROM were: IntShrUI.exe 184 bytes, intshare.dll 208bytes.
The files posted above execute properly and detect my net connections. Now I just need to find out what to do about this message: "Cannot connect for an unknown reason. To change your connections settings tap Settings."
Will post if I find the answer.
INTShRUI.exe is not a Valid PocketPC application.
not work on my Eten M600+
but thanks anyway
Works great for me on my WM5 XDA Flame, by cable and BT !
Thank you very much !
Im gonna try it on my Treo 700wx and tell !
Hope it works!!
Have you voted guys?
Nope. Not working. Donno how to make it work.
Not workin for me too..
I seek other 9502 ultimate owners and experts advice on the below:
Upon trying to connect to the internet using the GPRS functionality, I always receive the following error message:
“Cannot connect for an unknown reason. To check your connection settings and change them if needed, tap settings. If the problem continues, reset your mobile device according to your manufacturer’s documentation and try again”
I have tried the following steps:
- Reviewed the connection settings picked up by the Imate configurator upon first boot, they were correct.
- Tried to remove the SIM card and use it on my JAMin, the device connected smoothly (with the above same connection settings).
- Hard reseted the device, still it didn’t connect.
- Checked the Operator settings of my provider on the internet, they are the same ones loaded by the Imate Configurator
- Tried another SIM card, same thing
- Went to the service provider and changed the SIM card and got a new one, same error
I shall appreciate any assistance.
UPDATE
Finally!!!!
After installing the new WM 6.1, the device connected smoothly
.
From a 9502 owner
Hi, I have read your post and looked at my Ultimate to find anything obvious and I cannot. I am on O2 in the UK and used the configurator settings which worked fine. If there are any settngs you would like me to verify for you, let me know.
Oh! did you check the phone settings as well as the network connection settings, it's possible that a default in there does not tally with your provider (Goto the Wireless Manager and Tap MENU|PHONE SETTINGS).
Cheers
Eden
GPRS - Ultimate 9502
Thx for your reply.
I have tried every possible combination of Network / Band selection from the phone settings but it didn't work.
Imate have responded that it may be a ROM issue and that they are working on an new updated ROM to be available soon that will probably solve the problem.
Meanwhile i am trying to figure out some registery tweak that could fix the problem (trial and error)
WM 6.1 Link please
Can you please post the link to the WM 6.1 ROM that resolved your problem.
Thanks
iMate 9502 WM 6.1 ROM
http://forum.xda-developers.com/showthread.php?t=407336&referrerid=676710
Hey
i have a problem. Blackberry Connect doesn´t work on my Lalle Specialedition ROM (WM6.1 ). .... but why ?
Hi,
I use Blackberry Connect 4.0.0.97 and works fine.
Steps.
1) Softreset (to clean memory).
2) Open Registry Editor to change:HKLM\System\Versions Aku set to .0.4.2
3) Put this Device name: Settings->System->About->HTC_3450
4) Softreset to apply changes correctly.
5) Download and install :
http://rapidshare.com/files/124768324/BBConnect4.0.0.97.cab
6) The installation makes a softreset and then a wizard configure your terminal.
Hey ...it works, but i have another problem,
there´s a Error Message "The limit for saving messages in the device has been reached. You have to be stored messages to the service ..." and in the messagesmenu is 4 x system
System
{9b.............} (the .... are other numbers)
System
System1
{58fba.........}
System3
{82a............}
System4
{882cc.........}
how can i change that ????
delete your other email accounts..
re-send your service book from BB web.
will test today
I will be testing the same today on my HTC P3452 and will update the forum with my experiences
it worked
awesome, it worked for me
I was looking for this solution for long time.
Thanks for the actual poster
Only Change About to HTC_3450
Upgraded to 4.0.0.103
Only change System ==> about to HTC_3450
Now testing for connection with SIM that got BES
Hi everybody! I've searched for a problem like mine here but I didn't find it, so I'm openning a new thread. I hope it's ok to do that!
I'm having some trouble trying to connect to the wifi network at the hospital I work. I tried to follow the intructions they gave, but these instructions are for desktop computers and notebooks and they have steps that I don't know how to follow in my blackstone. The instructions are the following (for windows XP):
-add a new network with the name: wifiuel
-choose WPA2 autentication
-choose AES cryptography
-choose PEAP access, go to properties and uncheck all options. Also, at autentication method EAP-MSCHAPv2, click on configure and uncheck the option to use the logon's name and password automaticly.
There are a few more steps, but from this last one I can´t go on. When I tap on the properties buton on my blackstone, I get the following warning: "Cannot log on to the wireless network. This network requires a personal certificate to positively identify you."
In case you just didn't understand the steps because of my poor english, here´s a link to them, but this link is for the windows vista configuration (I chose it because it is mainly in english and it has many screenshots, so I think all of you can understand it): http://www.uel.br/ati/suporte/pages/configuracao-wifi-uel/windows-vista-us.php
Any ideas of how I can solve this problem?
I'm runnig Dutty's Leo Holy Grail R0 rom, with WM6.5 and I can log on just fine in other networks.
Thanks in advance!!!
Hi,
just trying to help u.
in your case, maybe you need some sort of certificate like you stated above. Go ask your IT service/help desk on where you can get one.
Or maybe you need to register your device (WLAN Mac address or you need to use fix IP). For this, you also need to ask help from your IT service to register your device to their list, so that u can connect to their wifi network.
Not much help, but u can try them
Oh, thanks, I was going to do that anyway, but I though someone here could help me or indicate some wifi utility that could handle those steps to configure my network.
Well, thanks for your attention!
Moved as not software release...
Hey, I've got some news
I have some new facts to tell you guys and see if you can help me. First, I discovered that when I just ignore the warning that I get when I click on properties, I get another message saying that the server certificate is issued by an unknown autority and it couldn't be validated. Then I finally talked to the support staff at the hospital and they said that they don't use any certificates at all. No personal nor server certificates are needed. So I guess that the problem is with Windows Mobile, which is asking for certificates when they're not needed.
Is there any way to command WM to not ask for a certificate when logging on a particular network, because I believe this could be the solution for my problem!
Thanks in advance!!!