Very strange BUG - Touch Cruise ROM Development

Today I was very suprised about behavior of my Orbit2.
After wake up of device, when I tried start any applications which located on SD card, I get error message.
I run file explorer and tried to see SD card. On first time, all was good, but I cant see directory /Program Files
After reboot all good.
What is it???
ROM bepe 0.67

Henry_Lee said:
Today I was very suprised about behavior of my Orbit2.
After wake up of device, when I tried start any applications which located on SD card, I get error message.
I run file explorer and tried to see SD card. On first time, all was good, but I cant see directory /Program Files
After reboot all good.
What is it???
ROM bepe 0.67
Click to expand...
Click to collapse
The Program File folder was deleted without you knowing

Aliens

.ForumUser said:
Aliens
Click to expand...
Click to collapse
hahaha good one bro

Henry_Lee said:
Today I was very suprised about behavior of my Orbit2.
After wake up of device, when I tried start any applications which located on SD card, I get error message.
I run file explorer and tried to see SD card. On first time, all was good, but I cant see directory /Program Files
After reboot all good.
What is it???
ROM bepe 0.67
Click to expand...
Click to collapse
sounds like a issolated issue. might be bad drivers though or needs some reg tweaking because this sounds like un stable communication between the device and sd. could also be a sd issue. if it doesnt come back then dont worry about it.

What i see here is SD corruption...
There's a thread about it:
http://forum.xda-developers.com/showthread.php?t=376050

Vasko said:
What i see here is SD corruption...
There's a thread about it:
http://forum.xda-developers.com/showthread.php?t=376050
Click to expand...
Click to collapse
could also be a bad SD.

Jibreil said:
hahaha good one bro
Click to expand...
Click to collapse
You still readed about elementary phisics?
Go away, go....

Vasko said:
What i see here is SD corruption...
There's a thread about it:
http://forum.xda-developers.com/showthread.php?t=376050
Click to expand...
Click to collapse
Yes, like to my problem....
But I cant read any solution to resolv it bug.

Henry_Lee said:
You still readed about elementary phisics?
Go away, go....
Click to expand...
Click to collapse
This has nothing to do with elementary physics <- at least learn to spell it right!

Jibreil said:
This has nothing to do with elementary physics <- at least learn to spell it right!
Click to expand...
Click to collapse
Anyway, go on. Dont annoy me by your stupid posts.

Henry_Lee,
You better start backing up your sd card. Even if resetting restored the index, you never know , if it happens again you might not be so lucky and end up loosing data.
The HTC Artemis had a similar problem which was corrected by a patch. What i don't know is if that patch could be applied to the Cruise also. Maybe it’s worth some investigation…

Related

wm2003 4.01.12 deleted my files?

after installed it on my t-mobile mda n' passed several difficult trouble on radiostack, this os such a great thing that i expect to figure on my pda. but, later i realized that the os didn't fit my expectation when its began to erase my files on the sdcard 'misteriously'.
a thing that make me become so so bad, the size of files doesn't match with the used area on the card, what kind of trouble is this? they erased my files but the space didn't change..
is there any idea to get my files back before i'm goin' to format it?
how to avoid it in the future?
thx for read it..
The only way to avoid it is to write protect the memory card by moving the slider switch to lock position.
slider switch...
thank's for ur answer, it migth be useful, but can you point the position of the slider? whether it's.on the pda or on memory? l'm using visipro mmc 256mb, n' i don't see any slider on lt.
thx.
Re: slider switch...
cep said:
thank's for ur answer, it migth be useful, but can you point the position of the slider? whether it's.on the pda or on memory? l'm using visipro mmc 256mb, n' i don't see any slider on lt.
thx.
Click to expand...
Click to collapse
Only SDCard has a write protect slider, and U'r using MMC not SDCard.
I have a same problem before, my SDCard erased, it happened twice, and I run the SD_Fix registry file, since 2 months this problem never happen any more.
How do I run this file?
Thanks
I'm glad to find oud this thread, i've faced this problem since i upgaded my XDA to 4.01.16, i've lost all data in my MMC card as you had.
I downloaded the "SD_fix" files but how do i run it to solve the problem ?
Thanks!!!
How to Run SD_fix.reg
sonie_vespie said:
I'm glad to find oud this thread, i've faced this problem since i upgaded my XDA to 4.01.16, i've lost all data in my MMC card as you had.
I downloaded the "SD_fix" files but how do i run it to solve the problem ?
Thanks!!!
Click to expand...
Click to collapse
just copy the .reg file to your PPC and run it. CMIIW...
Re: How to Run SD_fix.reg
dharma said:
just copy the .reg file to your PPC and run it. CMIIW...
Click to expand...
Click to collapse
Yes, but how? I have it on my PPC and when I click it, it says: "There is no applicationassociated with SD_FIX (working)". Run the application first then open the file from within the application".
Re: How to Run SD_fix.reg
Deke Martin said:
dharma said:
just copy the .reg file to your PPC and run it. CMIIW...
Click to expand...
Click to collapse
Yes, but how? I have it on my PPC and when I click it, it says: "There is no applicationassociated with SD_FIX (working)". Run the application first then open the file from within the application".
Click to expand...
Click to collapse
Sorry, I forgot to advise you to install Registry Editor Program on your PPC first. (e.g. PHM Reg edit)
hi,
it's quite good, i alo thought that but i had installed "regeditce" prog so the file doesn't associate .
I'd installed the PHM as u mentioned above and ran the SD_fix but it didn't react (install or import..ect), it just opened the PHM program. Hence, i dont know whether it's imported to the registry or not now i'm waiting and hope the problem will be solved.
Thank you all
Unfortunately, it doesn't work w­ell, after running that file, i installed two programs on storage card (HandMap and E-dictionary). Then I tried to soft reset and my MMc card was erased. oh, what can i do now ?
sonie_vespie said:
hi,
it's quite good, i alo thought that but i had installed "regeditce" prog so the file doesn't associate .
I'd installed the PHM as u mentioned above and ran the SD_fix but it didn't react (install or import..ect), it just opened the PHM program. Hence, i dont know whether it's imported to the registry or not now i'm waiting and hope the problem will be solved.
Thank you all
Click to expand...
Click to collapse
I don’t know exactly what the problem is, if another one who had the same prob and been solved please share how to solve this.
Sorry sonie_vespie I can’t help you better than I did.
Where is the SD_fix.reg file
Hi,
How can I get the SD_fix.reg file? Thanks
hi,
the file is above
I think that the .reg file is exported form a key in REGISTRY, but when i run it, it isn't imported to the defined key exactly so the card is still erased
Help me, thanks 'coz i like the 4.01.16 of T-Mobile
hi all,
Let use "Resco registry" to import SD_fix to Registry. It's okay now
sonie_vespie said:
hi all,
Let use "Resco registry" to import SD_fix to Registry. It's okay now
Click to expand...
Click to collapse
I glad to hear that, good luck than..
hi,
Many thanks for your help, darma
hope we have chance to share our xp
best regards,

Just joined the forum..newbie to Xperia..some quick help

hi guys,
normally on PC i consider myself a geek but when it comes to my phone..i dont know how to maximise its performance or do tweaks.
hope to get wisdom from the forum.
just one quick question..when i download the .cab installer..where do i place it in the phone?
can i execute it from any location?
You can place the cab anywhere you like. Most likely location is my documents. Then just run it by clicking it with the stylus.
Yes you can place the downloaded cab file anywhere in your phone and open it from there. it will install once you click on it. Some programs work when they are installed at the storage card and some don't.
a cab installer is like an setup.EXE on windows place where you want it then install it!
simple as 1 2 3
thats cool.
very easy to install the apps then.
thanks a ton. looking forward to use my X1 like a pro now
I made a cab-folder on my storage card where I keep all my cab's for what I have on my phone. So when I'm have to hard reset/upgrade my phone I have all my cab's for a new install.......smart?.....I think so
osmano said:
I made a cab-folder on my storage card where I keep all my cab's for what I have on my phone. So when I'm have to hard reset/upgrade my phone I have all my cab's for a new install.......smart?.....I think so
Click to expand...
Click to collapse
Yep then read up on UC roms and next rom you install will be even easier!
fards said:
Yep then read up on UC roms and next rom you install will be even easier!
Click to expand...
Click to collapse
That's true. You don't even need to a single click w/ UC.
For Cab, you can have it install to yr PPC w/ one right click on desktop w/ CabViaActiveSync. A must software for me.
Once you have installed a program can the cab file be deleted?
they used to but I believe that changed when wm5 came out
kirkie said:
Once you have installed a program can the cab file be deleted?
Click to expand...
Click to collapse
Yes you can, but it is always a good idea to keep a copy of all CABs on your PC/Laptop in case you need to re-install after a hard reset etc.
MACkjam said:
Yes you can, but it is always a good idea to keep a copy of all CABs on your PC/Laptop in case you need to re-install after a hard reset etc.
Click to expand...
Click to collapse
Cheers I have done that now....

leo ce log tool - problem solved

After emailing back and forth with the HTC support team about the Leo's "too loud ear piece" and after asking me a million questions they finally sent me the Debug tool 3.4 to run it in my Leo and send them the logfile.
Well the stupid application it's been running for 20 hours and never seems to stop. It did create some 20 DM files on my SD card which can't be seen in explorer anymore. I put it into a card reader to see what;s happening.
I hard reseted my Leo to stop the debugging tool but no use, I reflashed but nu use the darn thing still runs and kills my battery! WIFI doesn't work either!!!
What should I do?
wmfreak said:
After emailing back and forth with the HTC support team about the Leo's "too loud ear piece" and after asking me a million questions they finally sent me the Debug tool 3.4 to run it in my Leo and send them the logfile.
Well the stupid application it's been running for 20 hours and never seems to stop. It did create some 20 DM files on my SD card which can't be seen in explorer anymore. I put it into a card reader to see what;s happening.
I hard reseted my Leo to stop the debugging tool but no use, I reflashed but nu use the darn thing still runs and kills my battery!
What should I do?
Click to expand...
Click to collapse
If a hard reset doesn't do it I assume the tool is on your SD card? Delete it & try another hard reset...
wmfreak said:
After emailing back and forth with the HTC support team about the Leo's "too loud ear piece" and after asking me a million questions they finally sent me the Debug tool 3.4 to run it in my Leo and send them the logfile.
Well the stupid application it's been running for 20 hours and never seems to stop. It did create some 20 DM files on my SD card which can't be seen in explorer anymore. I put it into a card reader to see what;s happening.
I hard reseted my Leo to stop the debugging tool but no use, I reflashed but nu use the darn thing still runs and kills my battery!
What should I do?
Click to expand...
Click to collapse
Care to share that tool or am I out of line asking this?
Debug tool 3.4
Blade0rz said:
If a hard reset doesn't do it I assume the tool is on your SD card? Delete it & try another hard reset...
Click to expand...
Click to collapse
I've hard reseted and reflashed but the tool is still runnig
G
zzattack said:
Care to share that tool or am I out of line asking this?
Click to expand...
Click to collapse
here is the file
Take out the memory card and hard reset the device. That should at least stop it running.
Then, copy everything you want off your memory card and reformat it.
l3v5y said:
Take out the memory card and hard reset the device. That should at least stop it running.
Then, copy everything you want off your memory card and reformat it.
Click to expand...
Click to collapse
Trust me I've done that a few times already but same result! As soon as I open File explorer the stupid HtcLog is there and it's running as always! I've even updated the rom - same result! Please help!
GG
How about calling HTC again? They send you the app, so I guess they'll know how to get rid of it again.
Pappagallo said:
How about calling HTC again? They send you the app, so I guess they'll know how to get rid of it again.
Click to expand...
Click to collapse
well, guess what? They're off these days, holidays I guess. I've written to them a few messages and hopefully tomorrow morning they will reply. thanks anyway!
G
Have you removed the memory card?
If you have, what ROM version are you running?
l3v5y said:
Have you removed the memory card?
If you have, what ROM version are you running?
Click to expand...
Click to collapse
Yes I've removed the card. rom 1.61 right now, but I've flashed back to 1.48 but the problem still remains. I'v eeven tried different SD cards but they're not seen either. WiFi is not working either! I hate HTC customer service!
thanks
G

Anyone in this community able to answer this question? - EDIT! - problem solved!

After emailing back and forth with the HTC support team about the Leo's "too loud ear piece" and after asking me a million questions they finally sent me the Debug tool 3.4 to run it in my Leo and send them the logfile.
Well the stupid application it's been running for days and never seems to stop. It did create some 20 DM files on my SD card which can't be seen in explorer anymore. I put it into a card reader to see what's happening.
I hard reseted my Leo to stop the debugging tool but no use, I reflashed, taken out the sd card, but nu use the darn thing still runs and kills my battery! WIFI doesn't work either!!!
What should I do?
Please help!!!
G
hard reset
The only solution that always works
funny but not helpful!
thimiost said:
The only solution that always works
Click to expand...
Click to collapse
If you have the answer just give it to me! Trust me I've searched every possible forum!
Regards,
G
wmfreak said:
If you have the answer just give it to me! Trust me I've searched every possible forum!
Regards,
G
Click to expand...
Click to collapse
you must read carefully it is hard reset
he just told you m8 perform a hard reset on the device
I guess nobody read my post!
evo6 said:
he just told you m8 perform a hard reset on the device
Click to expand...
Click to collapse
If look carefully it does say that I've hard reseted, reflashed with different rom including cooked rom but same problem!!!
any help?
regards,
G
Format Your sdcard. the file must be on there if youve reflashed
Done that too!
fards said:
Format Your sdcard. the file must be on there if youve reflashed
Click to expand...
Click to collapse
I even swapped SD cards, formatted them you name it I've done it!
Please share your wisdom if you have an answer!!!
PS debug tool 3.4 is what's causing the problem!
Are you doing a hard reset without your sd card inserted?..
If the answer is yes, then try..
format your sd card, then flash a new rom using goldcard method.... it is virtually impossible for the file to stay storaged in the sd (after format) or the device (beacuse u did format it when doing the flashing process).
In makes sense but!
doctorcete said:
Are you doing a hard reset without your sd card inserted?..
If the answer is yes, then try..
format your sd card, then flash a new rom using goldcard method.... it is virtually impossible for the file to stay storaged in the sd (after format) or the device (beacuse u did format it when doing the flashing process).
Click to expand...
Click to collapse
I've reflashed even without SD (upgrade ROM 1.48 from 1.43) and the stupid and the Htclog folder is still iin File explorer under MyDevice working hard at creatinf log files!!!
I've tried to rerun the stupid Debug tool 3.4 but it says "Fail to read MFG area (6)" all the time!
I'm desperate! Pls Help!!!
G
wmfreak said:
I've reflashed even without SD (upgrade ROM 1.48 from 1.43) and the stupid and the Htclog folder is still iin File explorer under MyDevice working hard at creatinf log files!!!
I've tried to rerun the stupid Debug tool 3.4 but it says "Fail to read MFG area (6)" all the time!
I'm desperate! Pls Help!!!
G
Click to expand...
Click to collapse
I know hard reset should have helped, but try letting the phone empty and then remove the battery for a couple of hours-day, then try it agian.
Mabey I don't get the question but.. how come it's still working with the debugging tool while the phone is flashed? The debugging tool is prob. placed on a special sector of the main memory normaly not accessed by a rom, the program it self doesn't run from normal memory sectors, so you might have a try with a SPL update/overwright. If all fails send it back, why would htc give you this program? they allways say send it back and you'll get a new one?...
please post the tool, might give some insight after disasm. MFG area is interesting.
It's been written to special memory place.
Again, please post the tool you were given
how are you doing a hard reset?, are you using the clean memory tool software on your device, or are u pressing vol up and down simultaneously while powering on the device...... I just dont get how the program stays in memory after hard reset, even after flashing.
lucid said:
please post the tool, might give some insight after disasm. MFG area is interesting.
It's been written to special memory place.
Again, please post the tool you were given
Click to expand...
Click to collapse
yes, please post it.
if i "pdocread.exe -l" i find a 20MB-partition seperately.
could you post this part too?
okokur
Here is the tool! (BTW i fixed the problem)
okokur said:
yes, please post it.
if i "pdocread.exe -l" i find a 20MB-partition seperately.
could you post this part too?
okokur
Click to expand...
Click to collapse
I've attached the toll. I finally got rid of it by being able to rerun the program (which i prior tried a million times) and rewrite the parametres to "0" instead of 435 and 401. Give it a go if you know what you're doing and you can read log files.
regards,
G
You got rid of it. I edit out the post
Solution:
First backup your SD, after format with FAT32 .... reinstall your ROM and after insert your SD.
got dmmnit, glad u got rid of it, maybe we can learn how it.doez stick to the rom like that n use it in other apps like smartprotect. congrats!:
hi, do u mind sharing how u got rid of it?
I run this tool too, but after have no way to stop first try to read forum. Solution to stop program already is given from wmfreak. It is not need to make hard reset or to reformat SD card. Only things to do is to run program one more time and:
wmfreak said:
I finally got rid of it by being able to rerun the program (which i prior tried a million times) and rewrite the parametres to "0" instead of 435 and 401.
Click to expand...
Click to collapse
Thank you wmfreak

[Q] Cannot start HaRET anymore?

Hey all,
When I tap my HARET_PHOTON7227.exe file that was delivered with CardSharings latest package, I get the error "The file 'HARET_PHOTON7227.exe' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. You might need to reinstall or restore this file."
Formatting the SD card didn't work, neither did using the HARET.exe file that was delivered with Cotulla's port...
Help!
Thanks in advance!
MadMatt
I don`t think its a problem with the executable itself. Did you get that with your own rom or a stock one?
Did you read my info of this:
http://forum.xda-developers.com/showpost.php?p=12414206&postcount=9
I met the problem before.all the execute programs can not be launched and gave me the same information.neither a soft reset nor another sdcard worked.at last,I made a hard reset.it be resolved.good luck!
Indeed, all executables failed. I have hard reset my ROM (not a stock one) and now it works.
Thanks!
Interesting I have had this problem twice, a few months ago. But that was with an older version of Nsourm rom, of course no idea if it was something in the rom or another application that I installed...
Seems like a problem that occurs once in a while with custom ROMs... But now we know what to do
You didn't answer me!
Did you Read my Info or not?
This:
http://forum.xda-developers.com/showpost.php?p=12414206&postcount=9
_Madmatt said:
Seems like a problem that occurs once in a while with custom ROMs... But now we know what to do
Click to expand...
Click to collapse
Maybe a silly remark: I run your ROM too, never had an issue with haret before. But yesterday I got the same remark: what happened is the Storage Card2 issue, that the name of the storage card has changed from storage card to storage card2. This is an issue I haven't seen often lately. But it would be quite difficult not seeing this I guess.
iPlasm said:
You didn't answer me!
Did you Read my Info or not?
This:
http://forum.xda-developers.com/showpost.php?p=12414206&postcount=9
Click to expand...
Click to collapse
Oops, sorry, yes I've read your answer. And it wasn't correct. I tried to run HaRET from internal memory too But don't mind, after a hard reset it worked.
pwel said:
Maybe a silly remark: I run your ROM too, never had an issue with haret before. But yesterday I got the same remark: what happened is the Storage Card2 issue, that the name of the storage card has changed from storage card to storage card2. This is an issue I haven't seen often lately. But it would be quite difficult not seeing this I guess.
Click to expand...
Click to collapse
That's another issue I have this sometimes in Stock ROMs too. Don't know why it happens, seems like a bug in WM. Restarting your phone usually solves this
MadMatt, So you tried the number one and two, Right?
iPlasm said:
MadMatt, So you tried the number one and two, Right?
Click to expand...
Click to collapse
I have tried formatting yes, but not the registry thing. My device was already hard-resetted

Categories

Resources