Database Users

Seek advice on NO BOOTLOAD Screen

My MDA was unable to get back to bootload after a unsuccessful ROM upgrading. Is it possible to replace the ROM (hardware) so that I can save my MDA?
I tried the Power on key and softreset to reset it but only return to a messive screen.
Pls help. Thanks

cris...
you dont need to replace the hardware rom!!
try runing the upgrade program again, it sometimes picks up where it left off. if that dont work, try the SD card method.
i'd go into more details, but all that info is here in these forums already.
if u still need help though, contact me, and i'll try to help you.
good luck

Dear Ntabikha,
Thanks v much!
However, I tried the upgrade program many times and the decktop just said the computer cannot recognise the device.
So, I think method 1 is not possible.
For method two, I will try to put the nk.nbf file into my SD card and put it in the device and see whether the MDA can pick up the ROM. Will let you know whether it is successful.
BTW, when the screen is on, it only appears some fuzzy horizontal lines and two small empty boxes, have you seen this before?
Chris

yes, i had the same fuzzy lines. i fixed That problem via the SD card method.
just remember that, you have to write the nbf file to SD card, not just copy it to SD card
dont laugh, i did that mistake at first
good luck

How can I "write" it to the card?
I thought I only copy the file to the card through a SD reader.
Well, I know now, use rom kitchen to cook the rom and use osimagetool to copy the nb1 file into a sd card.
All i need to do next is to insert into the MDA and press power button together with softreset key for several times until successful....

Dear ntabikha,
I am still unable to obtain the bootloading screen of my MDA after inserting the SD with nb1 file written by xdatool. I tried many times power button and soft reset simultaneously (more than 20times) and the screen are still full of messy lines and 2 big empty boxes.
Can you help please? What is the fix broken bootloader in the xdatool?
I really did search around the forum but still can't be able to get back the bootloader screen. Pls help.
Chris

ntabikha said:
yes, i had the same fuzzy lines. i fixed That problem via the SD card method.
just remember that, you have to write the nbf file to SD card, not just copy it to SD card
dont laugh, i did that mistake at first
good luck
Click to expand...
Click to collapse
I'm wondering if you could not see bootloading screen , how could you use SD card to restore OS and bootloader ?

No, there is no bootloading screen at all.
I took the MDA out to a repair shop and they said that is a hardware failure. And they don't have the stock to replace it.
But I don't believe that cause I was just downloading the OS. It shouldn't hurt the hardware that much.....

chris_khho said:
BTW, when the screen is on, it only appears some fuzzy horizontal lines and two small empty boxes, have you seen this before?
Chris
Click to expand...
Click to collapse
I fixed couple such phones "horizontal lines and two small empty boxes" due to failure upgrading (all flash ROM messed up).
You have to use hardware flash ROM writer to wire the flash ROM pin to write bootloader and CE directly to chip.
I can help you to fix the problem (I'm in Canada, my email is [email protected])

Hi, I have similar trouble. My boss upgrade his MDA TMO (Austria) to official TMO version of OS and now it coming only to splash screen. MDA doesn't sync through cradle, doesn't seems to be charged, and I cannot enter BOOT mode for flashing ROM from SD card.
Is there any chance to fix it by myself?
Thanx, Ivan
TO CGIGATE: If you have any solution, can you post it here? Or it is so dangerous for nonexpert people? :wink:

Ivan said:
Hi, I have similar trouble. My boss upgrade his MDA TMO (Austria) to official TMO version of OS and now it coming only to splash screen. MDA doesn't sync through cradle, doesn't seems to be charged, and I cannot enter BOOT mode for flashing ROM from SD card.
Is there any chance to fix it by myself?
Thanx, Ivan
TO CGIGATE: If you have any solution, can you post it here? Or it is so dangerous for nonexpert people? :wink:
Click to expand...
Click to collapse
If you don't have a working OS and a working bootloader, the only solution is hardware solution. You have to wire the flash chip directly to the flash ROM writer ...
yes, it is dangerous for nonexpert people

Thank you CGIGATE for quick answer. Anyway I wrote you an email, could you be so kind and send me informations how I can do that, or where I can find these steps?[/quote]

leo ce log tool - problem solved

After emailing back and forth with the HTC support team about the Leo's "too loud ear piece" and after asking me a million questions they finally sent me the Debug tool 3.4 to run it in my Leo and send them the logfile.
Well the stupid application it's been running for 20 hours and never seems to stop. It did create some 20 DM files on my SD card which can't be seen in explorer anymore. I put it into a card reader to see what;s happening.
I hard reseted my Leo to stop the debugging tool but no use, I reflashed but nu use the darn thing still runs and kills my battery! WIFI doesn't work either!!!
What should I do?

wmfreak said:
After emailing back and forth with the HTC support team about the Leo's "too loud ear piece" and after asking me a million questions they finally sent me the Debug tool 3.4 to run it in my Leo and send them the logfile.
Well the stupid application it's been running for 20 hours and never seems to stop. It did create some 20 DM files on my SD card which can't be seen in explorer anymore. I put it into a card reader to see what;s happening.
I hard reseted my Leo to stop the debugging tool but no use, I reflashed but nu use the darn thing still runs and kills my battery!
What should I do?
Click to expand...
Click to collapse
If a hard reset doesn't do it I assume the tool is on your SD card? Delete it & try another hard reset...

wmfreak said:
After emailing back and forth with the HTC support team about the Leo's "too loud ear piece" and after asking me a million questions they finally sent me the Debug tool 3.4 to run it in my Leo and send them the logfile.
Well the stupid application it's been running for 20 hours and never seems to stop. It did create some 20 DM files on my SD card which can't be seen in explorer anymore. I put it into a card reader to see what;s happening.
I hard reseted my Leo to stop the debugging tool but no use, I reflashed but nu use the darn thing still runs and kills my battery!
What should I do?
Click to expand...
Click to collapse
Care to share that tool or am I out of line asking this?

Debug tool 3.4

Blade0rz said:
If a hard reset doesn't do it I assume the tool is on your SD card? Delete it & try another hard reset...
Click to expand...
Click to collapse
I've hard reseted and reflashed but the tool is still runnig
G

zzattack said:
Care to share that tool or am I out of line asking this?
Click to expand...
Click to collapse
here is the file

Take out the memory card and hard reset the device. That should at least stop it running.
Then, copy everything you want off your memory card and reformat it.

l3v5y said:
Take out the memory card and hard reset the device. That should at least stop it running.
Then, copy everything you want off your memory card and reformat it.
Click to expand...
Click to collapse
Trust me I've done that a few times already but same result! As soon as I open File explorer the stupid HtcLog is there and it's running as always! I've even updated the rom - same result! Please help!
GG

How about calling HTC again? They send you the app, so I guess they'll know how to get rid of it again.

Pappagallo said:
How about calling HTC again? They send you the app, so I guess they'll know how to get rid of it again.
Click to expand...
Click to collapse
well, guess what? They're off these days, holidays I guess. I've written to them a few messages and hopefully tomorrow morning they will reply. thanks anyway!
G

Have you removed the memory card?
If you have, what ROM version are you running?

l3v5y said:
Have you removed the memory card?
If you have, what ROM version are you running?
Click to expand...
Click to collapse
Yes I've removed the card. rom 1.61 right now, but I've flashed back to 1.48 but the problem still remains. I'v eeven tried different SD cards but they're not seen either. WiFi is not working either! I hate HTC customer service!
thanks
G

My HD2 is very unstable with different ROMS. Help please

Hello all,
I'm kinda frustrated with my HD2 device at the moment. It worked perfectly fine until a few days ago.
It has begun to freeze _very_ often. With some ROMS it can't even boot up. It freezes when I have to enter my PIN. On other ROMS it is guranteed to freeze when using ActiveSync/Exchange.
Using HSQL, I've tried L3v5y, XannyTechRom, and MIRI. All with the same result.
Have you got any ideas whats wrong with my device?
Any help will be much appreciated.

I have no idea about whats wrong but this has been a common issue/problem for many members...I don't think I saw this many issues with the HD...I dunno whats wrong with HD2 or the ROMs that it starts freezing for some...maybe the HSPL is buggy? I dunno to be honest.
maybe you should install a stock rom in between or go to MTTY and see if that fixes the issues for you.
Overall tho, its frightening to see how many people have freezing issues with Sense after flashing a couple of custom ROMs...I'm afraid it might eventually happen to everyone and thats why we need to find out what is causing this.
BTW try to format your SD card and then flash a stock ROM without the SD card and see if there is any improvement...my guess is that it will work fine again (for a while at least).

What I have figured out is that with different roms the behaviour is different, depending IN WHICH ORDER you have the links in the autostart folder.
Right after flashing it should be ok and if you install than other programms the startup interfears with the startup of htc-sense
Finaly I have the best result (on my device with the programms I have installed) keeping the htc-Sense startup as the LAST item.
You can change the order with sk-tools (Autotstart items).
You can check this (If you have a chance to access):
- Make a reset and do not enter the pin code of your sim card (on my device this was making a difference, if you do not have a pin code maybe you should take out your sim card that the phone cannot connect)
- Go to the settings and unselect in "Today" "HTC Sense"
Than you should have the normal "speed" of the device and you should be able to start sk tools and change the booting order.
It looks like that - depending on the start up order that applications - processes are waiting for each other and using nearly 100% of cpu power and you have therefore the impression that the device is frozen.
I am sorry I do not know how to change the startup order without sk-Tools
Best regards,
dingolino
tommyjakobsen said:
Hello all,
I'm kinda frustrated with my HD2 device at the moment. It worked perfectly fine until a few days ago.
It has begun to freeze _very_ often. With some ROMS it can't even boot up. It freezes when I have to enter my PIN. On other ROMS it is guranteed to freeze when using ActiveSync/Exchange.
Using HSQL, I've tried L3v5y, XannyTechRom, and MIRI. All with the same result.
Have you got any ideas whats wrong with my device?
Any help will be much appreciated.
Click to expand...
Click to collapse

tommyjakobsen said:
Hello all,
I'm kinda frustrated with my HD2 device at the moment. It worked perfectly fine until a few days ago.
It has begun to freeze _very_ often. With some ROMS it can't even boot up. It freezes when I have to enter my PIN. On other ROMS it is guranteed to freeze when using ActiveSync/Exchange.
Using HSQL, I've tried L3v5y, XannyTechRom, and MIRI. All with the same result.
Have you got any ideas whats wrong with my device?
Any help will be much appreciated.
Click to expand...
Click to collapse
try the strenas rom (arthemis V2). It has solved my pb

[email protected] said:
I have no idea about whats wrong but this has been a common issue/problem for many members...I don't think I saw this many issues with the HD...I dunno whats wrong with HD2 or the ROMs that it starts freezing for some...maybe the HSPL is buggy? I dunno to be honest.
maybe you should install a stock rom in between or go to MTTY and see if that fixes the issues for you.
Overall tho, its frightening to see how many people have freezing issues with Sense after flashing a couple of custom ROMs...I'm afraid it might eventually happen to everyone and thats why we need to find out what is causing this.
BTW try to format your SD card and then flash a stock ROM without the SD card and see if there is any improvement...my guess is that it will work fine again (for a while at least).
Click to expand...
Click to collapse
Thanks for your reply.
I will try what you suggest later today and then write back the results here. It would be very nice if we could solve this issue.
I don't really get that MTTY thing. What exactly does it do?

willbread said:
try the strenas rom (arthemis V2). It has solved my pb
Click to expand...
Click to collapse
Can you only use that ROM? Have you tried flashing another one after strenas?
I would really like to use l3v5y's ROM.

dingolino said:
What I have figured out is that with different roms the behaviour is different, depending IN WHICH ORDER you have the links in the autostart folder.
Right after flashing it should be ok and if you install than other programms the startup interfears with the startup of htc-sense
Finaly I have the best result (on my device with the programms I have installed) keeping the htc-Sense startup as the LAST item.
You can change the order with sk-tools (Autotstart items).
You can check this (If you have a chance to access):
- Make a reset and do not enter the pin code of your sim card (on my device this was making a difference, if you do not have a pin code maybe you should take out your sim card that the phone cannot connect)
- Go to the settings and unselect in "Today" "HTC Sense"
Than you should have the normal "speed" of the device and you should be able to start sk tools and change the booting order.
It looks like that - depending on the start up order that applications - processes are waiting for each other and using nearly 100% of cpu power and you have therefore the impression that the device is frozen.
I am sorry I do not know how to change the startup order without sk-Tools
Best regards,
dingolino
Click to expand...
Click to collapse
Very interesting dingolino!
Later today I will give that a shot aswell on l3v5y's ROM. Will report back.

tommyjakobsen said:
Thanks for your reply.
I will try what you suggest later today and then write back the results here. It would be very nice if we could solve this issue.
I don't really get that MTTY thing. What exactly does it do?
Click to expand...
Click to collapse
When you flash lots of cooked roms, they get "bloated" and the devices started hard-resetting for no reason. this is because of files from old roms being left when the new rom is flashed.
MTTY allows you to enter the device on bootloader and use service commands to format the file system on the device so you can remove all rom files before flashing a new rom!!
Click to expand...
Click to collapse
basicly it will format your system and make sure you don't have any files from older roms left on the system which might cause this issues.

tommyjakobsen said:
Can you only use that ROM? Have you tried flashing another one after strenas?
I would really like to use l3v5y's ROM.
Click to expand...
Click to collapse
i tried too l3v5y's ROM and it didn't work. But maybe, your pb is not exactly same as mine.
Do you you a 16 GB card ? for me, it's certainly cause of pb because i can use every rom without sd card
Try to ask more to sternas but i noticed he prefer keep his cook secrets

Try to install "official" 1.61, make HR after boot. After next reboot connect with PC and flash with any cooked ROM. I had the same problems like you and this helped me...

Petulinek said:
Try to install "official" 1.61, make HR after boot. After next reboot connect with PC and flash with any cooked ROM. I had the same problems like you and this helped me...
Click to expand...
Click to collapse
and for me, this didn't help me

willbread said:
i tried too l3v5y's ROM and it didn't work. But maybe, your pb is not exactly same as mine.
Do you you a 16 GB card ? for me, it's certainly cause of pb because i can use every rom without sd card
Try to ask more to sternas but i noticed he prefer keep his cook secrets
Click to expand...
Click to collapse
Try deleting the folder "\Application Folder" on the storage card using your PC/Laptop, and reinsert the SD card into HD2. I assume you are using ROM cooked with Manila version that has the document tab.
Let us know if this works for you. It took me a long time and many flashes to figure this out. I suppose you have configured your HD2 for emails or MS Exchange pushmail?
Edit : If you already experience the slowdown caused by inserting the SD Card, MAKE SURE you reboot your HD2 before re-inserting the SD card.

I had this "freezing during startup" with a number of roms (always after I installed my software) and since that I am always "tweaking" it by the startup order as I described it and was able to solve it!
I do not think that it is hardware related in the amount of cases which are reported. And I am also not a strong believer of this "flashing" and mtty discussion (it could be a solution is some cases but I do not think in this relatively larger number of cases which are reported).
For most of the rom cookers it is not the 1st rom cooking they are doing and the HD2 is not the 1st HD2 device for HTC as well. This is the reason why I do not think that there is a principle rom problem nor a principle hardware problem
Manila Sense is a complex pcs of software and the startup is therefore more complex.
Depending on the tweaks the rom cookers are doing on the XIP and other WM internals there could be a timing interfearance during booting and this is creating the trouble for Manila Sense startup (network, phone, etc.).
Reminds me to the "good old days" with ATART-ST where you had dedicated tools to rearrange the startup seaquenze of the Accessories
At least i think it is worth trying it, you cannot loose anything.
But I played not only with the finaly boot order of htc-Sense (the last one) but also I put other elements in a different order.
Sometimes it was helping to install Panolauncher and put it before HTC Sense startup - I had the impression that just having another application before HTCsense made an improvement to "give HTCSense" more time.
Does not sound like science but a little bit like Voodoo ...
My Autostart folder (only the applications)
1. poutlook.lnk
2. BTTrayCE.lnk
3. De|WMPTempFolder.lnk
4. PKG.lnk
5. Lotus Traveler.lnk (installed by me)
6. LotusPRUploader.lnk (installed by me)
7. Panolauncher.lnk (installed by me)
8. OM10QS.lnk (installed by me - Opera 10 beta)
9. HTCStartUp.lnk
Good luck
dingolino
tommyjakobsen said:
Very interesting dingolino!
Later today I will give that a shot aswell on l3v5y's ROM. Will report back.
Click to expand...
Click to collapse

gohyc said:
Try deleting the folder "\Application Folder" on the storage card using your PC/Laptop, and reinsert the SD card into HD2. I assume you are using ROM cooked with Manila version that has the document tab.
Let us know if this works for you. It took me a long time and many flashes to figure this out.
Click to expand...
Click to collapse
i haven't the folder "\Application Folder" on my card. Maybe, this is why this rom works well
I haven't verifyed before so i can't tell you if i had it before

Hi,
could you try to flash ROM that have manila 1921 (manila without document tab),
I facing so many problem when I install ROM with manila 1922 (manila got document tab)
Now has been 4 day, without any problem flash ROM with manila 1921...
give a try...

mtty may help u out

dingolino said:
What I have figured out is that with different roms the behaviour is different, depending IN WHICH ORDER you have the links in the autostart folder.
Right after flashing it should be ok and if you install than other programms the startup interfears with the startup of htc-sense
Finaly I have the best result (on my device with the programms I have installed) keeping the htc-Sense startup as the LAST item.
You can change the order with sk-tools (Autotstart items).
You can check this (If you have a chance to access):
dingolino
Click to expand...
Click to collapse
so i just got the last version of sktools.....could anybody please explain how I can change the startup order? sktools has allot of tools and I just cant figure out how its done!
thanx!

Hi,
sounds to me like you have flashed so many times you HD2 has become "Bloated"
this is where for eg, Rom X is 110Mb, and then you Flash Rom Y which is only 100Mb.
When you do the flash there is 10Mb of residual files left from the previous rom., when this happens often you get strange things happening like you describe and worse, your device can start hard resetting for no reason!!
Go to this thread (swap the ** for tt ) h**p://forum.xda-developers.com/showthread.php?t=616422 (I cant post links yet!!) and it will fix your issue. (The thread has been shut as there has been a big argument over it, something to do with a disagreement over drivers!! - how gay!)
I can honestly say, although i have only joined recently, i have been a user of this method for about 6 years, I personally know the Guy who opened the thread and i would stand buy him 100%.
Although the thread is closed, i will help with queries via PM if you like!
SS

gohyc said:
Try deleting the folder "\Application Folder" on the storage card using your PC/Laptop, and reinsert the SD card into HD2. I assume you are using ROM cooked with Manila version that has the document tab.
Let us know if this works for you. It took me a long time and many flashes to figure this out. I suppose you have configured your HD2 for emails or MS Exchange pushmail?
Edit : If you already experience the slowdown caused by inserting the SD Card, MAKE SURE you reboot your HD2 before re-inserting the SD card.
Click to expand...
Click to collapse
I tried deleting the \Application Folder folder and reset the phone.
Of course this equaled a hard reset as all system data stored was in \Application Folder.
So I removed my storage card and did a hard reset so that the system data will not be stored in the storage card.
Hopefully this will be make the device more stable as such.

use the mtty to format ur device first, then flash the rom u want to flash.
I have encountered the same issues just like u, after use the MTTY, so far so good.
the post is kind of complex, but it is worth to have a try.

[Q] Blue screen, HTC sence crashed.

Good evening.
My HTC crashed. this is the six time now..
So let me tell you what's the problem, hopefully you guy's can help me.
This happend last time:
I was typing an sms and after a while i tilt my mobile to landscape mode.
After doing this my mobile wouldn't return in normal screen mode.
so i soft rest my mobile.. not so smart move.
the text sounds: "tap here for loading HTC sence".
If i tap this it says: "HTC sence loading" but it will return to: "tap here for loading HTC sence".
I cant go into my startscreen so doing anything isn't an option.
Well i soft reset like 5 times and 3 times i yank the battery out while booting but it will ceep telling me the same thing...
My phone: HTC touch HD.
The rom i use: kwbr topix version 3.6
mmm i can't put an link in this post so the thread is: showthread.php?t=460640
So if anyone has an idea for me. that would be great!
I haven't done a hardrest before and I instald my ROM 5 times before now..
Thanks anyway.
Leek.

if just sense isn't working there's no problem, just backup your pim data and any other important files (pictures...) and hard reset the phone.

So if I take all my files from my SD-card and copy them to my PC (or take my SD-card out of my phone) and preform a hard-reset, then is there a chance that my phone will be alive again?
And a question:
A hard rest can be done by: pressing both volume button's and the powerbutton?
Thank you very much!

a hard reset does not affect the contents of the sd card, but the entire internal storage, meaning the space, where "\My Documents" and other folders are located, including all your contacts, messages...
you should sync your pim data (contacts, tasks, appointments...) either with outlook (that does not save your sms!) or with MS myphone (saves all) or pimbackup (saves all) and save your ringtones and possible photos stored internally, you can backup those files either with ms myphone as well or just copy and paste them to the storage card.
also, remember, a hard reset will delete all the programs installed and their respective settings, so keep your needed cab files present.
setting up the device after the hard reset will take some time, keep that in mind, but if you actually never performed one before, you will realise a huge improvement in speed.

Ok thank you very much.
I will preform a hard reset tonight so I can use it soon again ^^.
The data standing on my internal storage isn't usefull anymore. It's already on my pc so when I get home, I'll hard reset it right away!
Speed improvement is alway's welcome!
I'll let you know if my phone works again.
Thanks.

Wauw it worked perfectly!
The hard rest of my phone took only a minut, so that was far much better then installing the ROM over and over again!
Thanks for your advice.

yes, reflashing the rom does not really change anything, as long as you don't hard reset after flashing. to keep ypur phone clean and fast and not pollute it with old trash, always perform a hard reset after flashing. it is highly recommended when changing roms, and when staying on the same one, a hard reset can solve nearly any software related issues that appear over time

New problem...
My phone is acting weird again..
The problem is the startup now.
It takes around 5 min to get to the home screen.
but when you think its finaly started, then there appears an error:
Run FILEOP
\windows\Menu_FILEOP_Operator.txt
faild.
What can i do about this?
Hardreset again?
(this would be my 13th time that my phone crashed... i'm becomming crazy..)
can anyone help me with this?
Greets,
Leek1001

1) Backup all PIM data.
2) Preform Task 29(that's the topic showthread.php?t=653604)
3) Flash with the ROM you like
4) Hard reset 1 or 2 times depending of ROM requirements.
5) Restore the PIM data.
6) Have fun

dilqnski said:
1) Backup all PIM data.
2) Preform Task 29(that's the topic showthread.php?t=653604)
3) Flash with the ROM you like
4) Hard reset 1 or 2 times depending of ROM requirements.
5) Restore the PIM data.
6) Have fun
Click to expand...
Click to collapse
What is the advantage off this app Task 29?
because i don't know whats the main problem, so would this solve my problem?
Greets,
leek1001

Task 29 format the main memory of the PPC. Read the topic for more info. From my experience it make wonders

leek1001 said:
What is the advantage off this app Task 29?
because i don't know whats the main problem, so would this solve my problem?
Greets,
leek1001
Click to expand...
Click to collapse
Follow the f***ing link and read the thread. You'll find all the answers there!

motionz said:
Follow the f***ing link and read the thread. You'll find all the answers there!
Click to expand...
Click to collapse
Thank you for reading my entire post instead of the first line....
I say that I don't know what the problem is and nobody gave me an answer. task29 could fix my problem but I still don't know the exact problem...

motionz said:
Follow the f***ing blah blah blah
Click to expand...
Click to collapse
Pr1k...
leek1001, if i was you mate id reflash, remember to hard-reset but if that dont solve your problem, start reading about task29 dude..

raving_nanza said:
leek1001, if i was you mate id reflash, remember to hard-reset but if that dont solve your problem, start reading about task29 dude..
Click to expand...
Click to collapse
I've tried a reflash and afterwards a hardreset but didn't workout.
I'm following the topic about task29 now
I'm going to try it this weekend. thanks.

Well it worked out perfectly!
for everyone having troubles with the ROM's of Kwbr try to update your radio rom version!
I had 1.09 and now I've version 1.17.
men.. if I had done that earlier!
Greets,
Leek1001

...
glad you got yourself sorted dude..

How to make Goldcard for WM-based phones?

Hi everybody;
I know this matter has been discussed b4 here in the forum but in fact i'm confused and have not found any way for WM phones.In this case my phone is ARTE100,i hope you'd help me get out of this like u've done many times before
This phone stucks on HTC logo and won't go to bootlaoder menu as well.
Thanks in advance.

saratel-gsm said:
Hi everybody;
I know this matter has been discussed b4 here in the forum but in fact i'm confused and have not found any way for WM phones.In this case my phone is ARTE100,i hope you'd help me get out of this like u've done many times before
This phone stucks on HTC logo and won't go to bootlaoder menu as well.
Thanks in advance.
Click to expand...
Click to collapse
you should do is To perform a hard reset device Hard reset Soft reset
Press and hold the Left SOFT KEY and the Right SOFT KEY, and at the same time, use the stylus to press the RESET button at the lower left side of your device.
Release the stylus, but continue pressing the two soft key buttons. Release them only when you see the following message on your device screen: “Press Send to restore manufacturer default, or press other keys to cancel.“
Press on your device. Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.
about the gold card, for more details you can see it in -> http://psas.revskills.de/

...
gold card is just the correct original rom on the micro sd.
to make a gold card:
1.download your correct original rom
2.put it on your micro sd
3.rename the .NBH to Arteimg.nbh
4.put it into your device and enable bootloader
Rn

raving_nanza said:
gold card is just the correct original rom on the micro sd.
to make a gold card:
1.download your correct original rom
2.put it on your micro sd
3.rename the .NBH to Arteimg.nbh
4.put it into your device and enable bootloader
Rn
Click to expand...
Click to collapse
what you've never tried it ..?
and how the results...??
the success you get a gold card, Raving ..?

my post was how to make a gold card and advice to ''saratel-gsm'' on what a gold card actually is..
Hakim Rahman said:
what you've never tried it ..?
Click to expand...
Click to collapse
*of course i have tried it, i posted how to make a gold card
Hakim Rahman said:
and how the results...??
Click to expand...
Click to collapse
*im not exactly sure what your asking dude, please explain?
Hakim Rahman said:
the success you get a gold card, Raving ..?
Click to expand...
Click to collapse
* again, im not exactly sure what your asking dude, please explain?

raving_nanza said:
my post was how to make a gold card and advice to ''saratel-gsm'' on what a gold card actually is..
*of course i have tried it, i posted how to make a gold card
*im not exactly sure what your asking dude, please explain?
* again, im not exactly sure what your asking dude, please explain?
Click to expand...
Click to collapse
forget it ...!! I just want to know if you managed to get a gold card ....

Hakim Rahman said:
I just want to know if you managed to get a gold card.
Click to expand...
Click to collapse
sorry Hakim, i was not sure what you meant..
well, anyway.. that is how you make a gold card from scratch..
i have noticed you help alot on the artemis forum.. keep up the good work dude, it makes Neo's job a lot easier for him and im sure he appreciates all the help
* iv added how to make gold card to the tips&tricks thread..
saratel-gsm - click on the tips&tricks thread, you will need to look for the "Bricked Device" post.
ill ask Neo to close this thread now, i think its safe to say the OP question is solved..
Rn