After emailing back and forth with the HTC support team about the Leo's "too loud ear piece" and after asking me a million questions they finally sent me the Debug tool 3.4 to run it in my Leo and send them the logfile.
Well the stupid application it's been running for 20 hours and never seems to stop. It did create some 20 DM files on my SD card which can't be seen in explorer anymore. I put it into a card reader to see what;s happening.
I hard reseted my Leo to stop the debugging tool but no use, I reflashed but nu use the darn thing still runs and kills my battery! WIFI doesn't work either!!!
What should I do?
wmfreak said:
After emailing back and forth with the HTC support team about the Leo's "too loud ear piece" and after asking me a million questions they finally sent me the Debug tool 3.4 to run it in my Leo and send them the logfile.
Well the stupid application it's been running for 20 hours and never seems to stop. It did create some 20 DM files on my SD card which can't be seen in explorer anymore. I put it into a card reader to see what;s happening.
I hard reseted my Leo to stop the debugging tool but no use, I reflashed but nu use the darn thing still runs and kills my battery!
What should I do?
Click to expand...
Click to collapse
If a hard reset doesn't do it I assume the tool is on your SD card? Delete it & try another hard reset...
wmfreak said:
After emailing back and forth with the HTC support team about the Leo's "too loud ear piece" and after asking me a million questions they finally sent me the Debug tool 3.4 to run it in my Leo and send them the logfile.
Well the stupid application it's been running for 20 hours and never seems to stop. It did create some 20 DM files on my SD card which can't be seen in explorer anymore. I put it into a card reader to see what;s happening.
I hard reseted my Leo to stop the debugging tool but no use, I reflashed but nu use the darn thing still runs and kills my battery!
What should I do?
Click to expand...
Click to collapse
Care to share that tool or am I out of line asking this?
Debug tool 3.4
Blade0rz said:
If a hard reset doesn't do it I assume the tool is on your SD card? Delete it & try another hard reset...
Click to expand...
Click to collapse
I've hard reseted and reflashed but the tool is still runnig
G
zzattack said:
Care to share that tool or am I out of line asking this?
Click to expand...
Click to collapse
here is the file
Take out the memory card and hard reset the device. That should at least stop it running.
Then, copy everything you want off your memory card and reformat it.
l3v5y said:
Take out the memory card and hard reset the device. That should at least stop it running.
Then, copy everything you want off your memory card and reformat it.
Click to expand...
Click to collapse
Trust me I've done that a few times already but same result! As soon as I open File explorer the stupid HtcLog is there and it's running as always! I've even updated the rom - same result! Please help!
GG
How about calling HTC again? They send you the app, so I guess they'll know how to get rid of it again.
Pappagallo said:
How about calling HTC again? They send you the app, so I guess they'll know how to get rid of it again.
Click to expand...
Click to collapse
well, guess what? They're off these days, holidays I guess. I've written to them a few messages and hopefully tomorrow morning they will reply. thanks anyway!
G
Have you removed the memory card?
If you have, what ROM version are you running?
l3v5y said:
Have you removed the memory card?
If you have, what ROM version are you running?
Click to expand...
Click to collapse
Yes I've removed the card. rom 1.61 right now, but I've flashed back to 1.48 but the problem still remains. I'v eeven tried different SD cards but they're not seen either. WiFi is not working either! I hate HTC customer service!
thanks
G
Related
Today I was very suprised about behavior of my Orbit2.
After wake up of device, when I tried start any applications which located on SD card, I get error message.
I run file explorer and tried to see SD card. On first time, all was good, but I cant see directory /Program Files
After reboot all good.
What is it???
ROM bepe 0.67
Henry_Lee said:
Today I was very suprised about behavior of my Orbit2.
After wake up of device, when I tried start any applications which located on SD card, I get error message.
I run file explorer and tried to see SD card. On first time, all was good, but I cant see directory /Program Files
After reboot all good.
What is it???
ROM bepe 0.67
Click to expand...
Click to collapse
The Program File folder was deleted without you knowing
Aliens
.ForumUser said:
Aliens
Click to expand...
Click to collapse
hahaha good one bro
Henry_Lee said:
Today I was very suprised about behavior of my Orbit2.
After wake up of device, when I tried start any applications which located on SD card, I get error message.
I run file explorer and tried to see SD card. On first time, all was good, but I cant see directory /Program Files
After reboot all good.
What is it???
ROM bepe 0.67
Click to expand...
Click to collapse
sounds like a issolated issue. might be bad drivers though or needs some reg tweaking because this sounds like un stable communication between the device and sd. could also be a sd issue. if it doesnt come back then dont worry about it.
What i see here is SD corruption...
There's a thread about it:
http://forum.xda-developers.com/showthread.php?t=376050
Vasko said:
What i see here is SD corruption...
There's a thread about it:
http://forum.xda-developers.com/showthread.php?t=376050
Click to expand...
Click to collapse
could also be a bad SD.
Jibreil said:
hahaha good one bro
Click to expand...
Click to collapse
You still readed about elementary phisics?
Go away, go....
Vasko said:
What i see here is SD corruption...
There's a thread about it:
http://forum.xda-developers.com/showthread.php?t=376050
Click to expand...
Click to collapse
Yes, like to my problem....
But I cant read any solution to resolv it bug.
Henry_Lee said:
You still readed about elementary phisics?
Go away, go....
Click to expand...
Click to collapse
This has nothing to do with elementary physics <- at least learn to spell it right!
Jibreil said:
This has nothing to do with elementary physics <- at least learn to spell it right!
Click to expand...
Click to collapse
Anyway, go on. Dont annoy me by your stupid posts.
Henry_Lee,
You better start backing up your sd card. Even if resetting restored the index, you never know , if it happens again you might not be so lucky and end up loosing data.
The HTC Artemis had a similar problem which was corrected by a patch. What i don't know is if that patch could be applied to the Cruise also. Maybe it’s worth some investigation…
After emailing back and forth with the HTC support team about the Leo's "too loud ear piece" and after asking me a million questions they finally sent me the Debug tool 3.4 to run it in my Leo and send them the logfile.
Well the stupid application it's been running for days and never seems to stop. It did create some 20 DM files on my SD card which can't be seen in explorer anymore. I put it into a card reader to see what's happening.
I hard reseted my Leo to stop the debugging tool but no use, I reflashed, taken out the sd card, but nu use the darn thing still runs and kills my battery! WIFI doesn't work either!!!
What should I do?
Please help!!!
G
hard reset
The only solution that always works
funny but not helpful!
thimiost said:
The only solution that always works
Click to expand...
Click to collapse
If you have the answer just give it to me! Trust me I've searched every possible forum!
Regards,
G
wmfreak said:
If you have the answer just give it to me! Trust me I've searched every possible forum!
Regards,
G
Click to expand...
Click to collapse
you must read carefully it is hard reset
he just told you m8 perform a hard reset on the device
I guess nobody read my post!
evo6 said:
he just told you m8 perform a hard reset on the device
Click to expand...
Click to collapse
If look carefully it does say that I've hard reseted, reflashed with different rom including cooked rom but same problem!!!
any help?
regards,
G
Format Your sdcard. the file must be on there if youve reflashed
Done that too!
fards said:
Format Your sdcard. the file must be on there if youve reflashed
Click to expand...
Click to collapse
I even swapped SD cards, formatted them you name it I've done it!
Please share your wisdom if you have an answer!!!
PS debug tool 3.4 is what's causing the problem!
Are you doing a hard reset without your sd card inserted?..
If the answer is yes, then try..
format your sd card, then flash a new rom using goldcard method.... it is virtually impossible for the file to stay storaged in the sd (after format) or the device (beacuse u did format it when doing the flashing process).
In makes sense but!
doctorcete said:
Are you doing a hard reset without your sd card inserted?..
If the answer is yes, then try..
format your sd card, then flash a new rom using goldcard method.... it is virtually impossible for the file to stay storaged in the sd (after format) or the device (beacuse u did format it when doing the flashing process).
Click to expand...
Click to collapse
I've reflashed even without SD (upgrade ROM 1.48 from 1.43) and the stupid and the Htclog folder is still iin File explorer under MyDevice working hard at creatinf log files!!!
I've tried to rerun the stupid Debug tool 3.4 but it says "Fail to read MFG area (6)" all the time!
I'm desperate! Pls Help!!!
G
wmfreak said:
I've reflashed even without SD (upgrade ROM 1.48 from 1.43) and the stupid and the Htclog folder is still iin File explorer under MyDevice working hard at creatinf log files!!!
I've tried to rerun the stupid Debug tool 3.4 but it says "Fail to read MFG area (6)" all the time!
I'm desperate! Pls Help!!!
G
Click to expand...
Click to collapse
I know hard reset should have helped, but try letting the phone empty and then remove the battery for a couple of hours-day, then try it agian.
Mabey I don't get the question but.. how come it's still working with the debugging tool while the phone is flashed? The debugging tool is prob. placed on a special sector of the main memory normaly not accessed by a rom, the program it self doesn't run from normal memory sectors, so you might have a try with a SPL update/overwright. If all fails send it back, why would htc give you this program? they allways say send it back and you'll get a new one?...
please post the tool, might give some insight after disasm. MFG area is interesting.
It's been written to special memory place.
Again, please post the tool you were given
how are you doing a hard reset?, are you using the clean memory tool software on your device, or are u pressing vol up and down simultaneously while powering on the device...... I just dont get how the program stays in memory after hard reset, even after flashing.
lucid said:
please post the tool, might give some insight after disasm. MFG area is interesting.
It's been written to special memory place.
Again, please post the tool you were given
Click to expand...
Click to collapse
yes, please post it.
if i "pdocread.exe -l" i find a 20MB-partition seperately.
could you post this part too?
okokur
Here is the tool! (BTW i fixed the problem)
okokur said:
yes, please post it.
if i "pdocread.exe -l" i find a 20MB-partition seperately.
could you post this part too?
okokur
Click to expand...
Click to collapse
I've attached the toll. I finally got rid of it by being able to rerun the program (which i prior tried a million times) and rewrite the parametres to "0" instead of 435 and 401. Give it a go if you know what you're doing and you can read log files.
regards,
G
You got rid of it. I edit out the post
Solution:
First backup your SD, after format with FAT32 .... reinstall your ROM and after insert your SD.
got dmmnit, glad u got rid of it, maybe we can learn how it.doez stick to the rom like that n use it in other apps like smartprotect. congrats!:
hi, do u mind sharing how u got rid of it?
I run this tool too, but after have no way to stop first try to read forum. Solution to stop program already is given from wmfreak. It is not need to make hard reset or to reformat SD card. Only things to do is to run program one more time and:
wmfreak said:
I finally got rid of it by being able to rerun the program (which i prior tried a million times) and rewrite the parametres to "0" instead of 435 and 401.
Click to expand...
Click to collapse
Thank you wmfreak
Hello all,
I'm kinda frustrated with my HD2 device at the moment. It worked perfectly fine until a few days ago.
It has begun to freeze _very_ often. With some ROMS it can't even boot up. It freezes when I have to enter my PIN. On other ROMS it is guranteed to freeze when using ActiveSync/Exchange.
Using HSQL, I've tried L3v5y, XannyTechRom, and MIRI. All with the same result.
Have you got any ideas whats wrong with my device?
Any help will be much appreciated.
I have no idea about whats wrong but this has been a common issue/problem for many members...I don't think I saw this many issues with the HD...I dunno whats wrong with HD2 or the ROMs that it starts freezing for some...maybe the HSPL is buggy? I dunno to be honest.
maybe you should install a stock rom in between or go to MTTY and see if that fixes the issues for you.
Overall tho, its frightening to see how many people have freezing issues with Sense after flashing a couple of custom ROMs...I'm afraid it might eventually happen to everyone and thats why we need to find out what is causing this.
BTW try to format your SD card and then flash a stock ROM without the SD card and see if there is any improvement...my guess is that it will work fine again (for a while at least).
What I have figured out is that with different roms the behaviour is different, depending IN WHICH ORDER you have the links in the autostart folder.
Right after flashing it should be ok and if you install than other programms the startup interfears with the startup of htc-sense
Finaly I have the best result (on my device with the programms I have installed) keeping the htc-Sense startup as the LAST item.
You can change the order with sk-tools (Autotstart items).
You can check this (If you have a chance to access):
- Make a reset and do not enter the pin code of your sim card (on my device this was making a difference, if you do not have a pin code maybe you should take out your sim card that the phone cannot connect)
- Go to the settings and unselect in "Today" "HTC Sense"
Than you should have the normal "speed" of the device and you should be able to start sk tools and change the booting order.
It looks like that - depending on the start up order that applications - processes are waiting for each other and using nearly 100% of cpu power and you have therefore the impression that the device is frozen.
I am sorry I do not know how to change the startup order without sk-Tools
Best regards,
dingolino
tommyjakobsen said:
Hello all,
I'm kinda frustrated with my HD2 device at the moment. It worked perfectly fine until a few days ago.
It has begun to freeze _very_ often. With some ROMS it can't even boot up. It freezes when I have to enter my PIN. On other ROMS it is guranteed to freeze when using ActiveSync/Exchange.
Using HSQL, I've tried L3v5y, XannyTechRom, and MIRI. All with the same result.
Have you got any ideas whats wrong with my device?
Any help will be much appreciated.
Click to expand...
Click to collapse
tommyjakobsen said:
Hello all,
I'm kinda frustrated with my HD2 device at the moment. It worked perfectly fine until a few days ago.
It has begun to freeze _very_ often. With some ROMS it can't even boot up. It freezes when I have to enter my PIN. On other ROMS it is guranteed to freeze when using ActiveSync/Exchange.
Using HSQL, I've tried L3v5y, XannyTechRom, and MIRI. All with the same result.
Have you got any ideas whats wrong with my device?
Any help will be much appreciated.
Click to expand...
Click to collapse
try the strenas rom (arthemis V2). It has solved my pb
[email protected] said:
I have no idea about whats wrong but this has been a common issue/problem for many members...I don't think I saw this many issues with the HD...I dunno whats wrong with HD2 or the ROMs that it starts freezing for some...maybe the HSPL is buggy? I dunno to be honest.
maybe you should install a stock rom in between or go to MTTY and see if that fixes the issues for you.
Overall tho, its frightening to see how many people have freezing issues with Sense after flashing a couple of custom ROMs...I'm afraid it might eventually happen to everyone and thats why we need to find out what is causing this.
BTW try to format your SD card and then flash a stock ROM without the SD card and see if there is any improvement...my guess is that it will work fine again (for a while at least).
Click to expand...
Click to collapse
Thanks for your reply.
I will try what you suggest later today and then write back the results here. It would be very nice if we could solve this issue.
I don't really get that MTTY thing. What exactly does it do?
willbread said:
try the strenas rom (arthemis V2). It has solved my pb
Click to expand...
Click to collapse
Can you only use that ROM? Have you tried flashing another one after strenas?
I would really like to use l3v5y's ROM.
dingolino said:
What I have figured out is that with different roms the behaviour is different, depending IN WHICH ORDER you have the links in the autostart folder.
Right after flashing it should be ok and if you install than other programms the startup interfears with the startup of htc-sense
Finaly I have the best result (on my device with the programms I have installed) keeping the htc-Sense startup as the LAST item.
You can change the order with sk-tools (Autotstart items).
You can check this (If you have a chance to access):
- Make a reset and do not enter the pin code of your sim card (on my device this was making a difference, if you do not have a pin code maybe you should take out your sim card that the phone cannot connect)
- Go to the settings and unselect in "Today" "HTC Sense"
Than you should have the normal "speed" of the device and you should be able to start sk tools and change the booting order.
It looks like that - depending on the start up order that applications - processes are waiting for each other and using nearly 100% of cpu power and you have therefore the impression that the device is frozen.
I am sorry I do not know how to change the startup order without sk-Tools
Best regards,
dingolino
Click to expand...
Click to collapse
Very interesting dingolino!
Later today I will give that a shot aswell on l3v5y's ROM. Will report back.
tommyjakobsen said:
Thanks for your reply.
I will try what you suggest later today and then write back the results here. It would be very nice if we could solve this issue.
I don't really get that MTTY thing. What exactly does it do?
Click to expand...
Click to collapse
When you flash lots of cooked roms, they get "bloated" and the devices started hard-resetting for no reason. this is because of files from old roms being left when the new rom is flashed.
MTTY allows you to enter the device on bootloader and use service commands to format the file system on the device so you can remove all rom files before flashing a new rom!!
Click to expand...
Click to collapse
basicly it will format your system and make sure you don't have any files from older roms left on the system which might cause this issues.
tommyjakobsen said:
Can you only use that ROM? Have you tried flashing another one after strenas?
I would really like to use l3v5y's ROM.
Click to expand...
Click to collapse
i tried too l3v5y's ROM and it didn't work. But maybe, your pb is not exactly same as mine.
Do you you a 16 GB card ? for me, it's certainly cause of pb because i can use every rom without sd card
Try to ask more to sternas but i noticed he prefer keep his cook secrets
Try to install "official" 1.61, make HR after boot. After next reboot connect with PC and flash with any cooked ROM. I had the same problems like you and this helped me...
Petulinek said:
Try to install "official" 1.61, make HR after boot. After next reboot connect with PC and flash with any cooked ROM. I had the same problems like you and this helped me...
Click to expand...
Click to collapse
and for me, this didn't help me
willbread said:
i tried too l3v5y's ROM and it didn't work. But maybe, your pb is not exactly same as mine.
Do you you a 16 GB card ? for me, it's certainly cause of pb because i can use every rom without sd card
Try to ask more to sternas but i noticed he prefer keep his cook secrets
Click to expand...
Click to collapse
Try deleting the folder "\Application Folder" on the storage card using your PC/Laptop, and reinsert the SD card into HD2. I assume you are using ROM cooked with Manila version that has the document tab.
Let us know if this works for you. It took me a long time and many flashes to figure this out. I suppose you have configured your HD2 for emails or MS Exchange pushmail?
Edit : If you already experience the slowdown caused by inserting the SD Card, MAKE SURE you reboot your HD2 before re-inserting the SD card.
I had this "freezing during startup" with a number of roms (always after I installed my software) and since that I am always "tweaking" it by the startup order as I described it and was able to solve it!
I do not think that it is hardware related in the amount of cases which are reported. And I am also not a strong believer of this "flashing" and mtty discussion (it could be a solution is some cases but I do not think in this relatively larger number of cases which are reported).
For most of the rom cookers it is not the 1st rom cooking they are doing and the HD2 is not the 1st HD2 device for HTC as well. This is the reason why I do not think that there is a principle rom problem nor a principle hardware problem
Manila Sense is a complex pcs of software and the startup is therefore more complex.
Depending on the tweaks the rom cookers are doing on the XIP and other WM internals there could be a timing interfearance during booting and this is creating the trouble for Manila Sense startup (network, phone, etc.).
Reminds me to the "good old days" with ATART-ST where you had dedicated tools to rearrange the startup seaquenze of the Accessories
At least i think it is worth trying it, you cannot loose anything.
But I played not only with the finaly boot order of htc-Sense (the last one) but also I put other elements in a different order.
Sometimes it was helping to install Panolauncher and put it before HTC Sense startup - I had the impression that just having another application before HTCsense made an improvement to "give HTCSense" more time.
Does not sound like science but a little bit like Voodoo ...
My Autostart folder (only the applications)
1. poutlook.lnk
2. BTTrayCE.lnk
3. De|WMPTempFolder.lnk
4. PKG.lnk
5. Lotus Traveler.lnk (installed by me)
6. LotusPRUploader.lnk (installed by me)
7. Panolauncher.lnk (installed by me)
8. OM10QS.lnk (installed by me - Opera 10 beta)
9. HTCStartUp.lnk
Good luck
dingolino
tommyjakobsen said:
Very interesting dingolino!
Later today I will give that a shot aswell on l3v5y's ROM. Will report back.
Click to expand...
Click to collapse
gohyc said:
Try deleting the folder "\Application Folder" on the storage card using your PC/Laptop, and reinsert the SD card into HD2. I assume you are using ROM cooked with Manila version that has the document tab.
Let us know if this works for you. It took me a long time and many flashes to figure this out.
Click to expand...
Click to collapse
i haven't the folder "\Application Folder" on my card. Maybe, this is why this rom works well
I haven't verifyed before so i can't tell you if i had it before
Hi,
could you try to flash ROM that have manila 1921 (manila without document tab),
I facing so many problem when I install ROM with manila 1922 (manila got document tab)
Now has been 4 day, without any problem flash ROM with manila 1921...
give a try...
mtty may help u out
dingolino said:
What I have figured out is that with different roms the behaviour is different, depending IN WHICH ORDER you have the links in the autostart folder.
Right after flashing it should be ok and if you install than other programms the startup interfears with the startup of htc-sense
Finaly I have the best result (on my device with the programms I have installed) keeping the htc-Sense startup as the LAST item.
You can change the order with sk-tools (Autotstart items).
You can check this (If you have a chance to access):
dingolino
Click to expand...
Click to collapse
so i just got the last version of sktools.....could anybody please explain how I can change the startup order? sktools has allot of tools and I just cant figure out how its done!
thanx!
Hi,
sounds to me like you have flashed so many times you HD2 has become "Bloated"
this is where for eg, Rom X is 110Mb, and then you Flash Rom Y which is only 100Mb.
When you do the flash there is 10Mb of residual files left from the previous rom., when this happens often you get strange things happening like you describe and worse, your device can start hard resetting for no reason!!
Go to this thread (swap the ** for tt ) h**p://forum.xda-developers.com/showthread.php?t=616422 (I cant post links yet!!) and it will fix your issue. (The thread has been shut as there has been a big argument over it, something to do with a disagreement over drivers!! - how gay!)
I can honestly say, although i have only joined recently, i have been a user of this method for about 6 years, I personally know the Guy who opened the thread and i would stand buy him 100%.
Although the thread is closed, i will help with queries via PM if you like!
SS
gohyc said:
Try deleting the folder "\Application Folder" on the storage card using your PC/Laptop, and reinsert the SD card into HD2. I assume you are using ROM cooked with Manila version that has the document tab.
Let us know if this works for you. It took me a long time and many flashes to figure this out. I suppose you have configured your HD2 for emails or MS Exchange pushmail?
Edit : If you already experience the slowdown caused by inserting the SD Card, MAKE SURE you reboot your HD2 before re-inserting the SD card.
Click to expand...
Click to collapse
I tried deleting the \Application Folder folder and reset the phone.
Of course this equaled a hard reset as all system data stored was in \Application Folder.
So I removed my storage card and did a hard reset so that the system data will not be stored in the storage card.
Hopefully this will be make the device more stable as such.
use the mtty to format ur device first, then flash the rom u want to flash.
I have encountered the same issues just like u, after use the MTTY, so far so good.
the post is kind of complex, but it is worth to have a try.
Good evening.
My HTC crashed. this is the six time now..
So let me tell you what's the problem, hopefully you guy's can help me.
This happend last time:
I was typing an sms and after a while i tilt my mobile to landscape mode.
After doing this my mobile wouldn't return in normal screen mode.
so i soft rest my mobile.. not so smart move.
the text sounds: "tap here for loading HTC sence".
If i tap this it says: "HTC sence loading" but it will return to: "tap here for loading HTC sence".
I cant go into my startscreen so doing anything isn't an option.
Well i soft reset like 5 times and 3 times i yank the battery out while booting but it will ceep telling me the same thing...
My phone: HTC touch HD.
The rom i use: kwbr topix version 3.6
mmm i can't put an link in this post so the thread is: showthread.php?t=460640
So if anyone has an idea for me. that would be great!
I haven't done a hardrest before and I instald my ROM 5 times before now..
Thanks anyway.
Leek.
if just sense isn't working there's no problem, just backup your pim data and any other important files (pictures...) and hard reset the phone.
So if I take all my files from my SD-card and copy them to my PC (or take my SD-card out of my phone) and preform a hard-reset, then is there a chance that my phone will be alive again?
And a question:
A hard rest can be done by: pressing both volume button's and the powerbutton?
Thank you very much!
a hard reset does not affect the contents of the sd card, but the entire internal storage, meaning the space, where "\My Documents" and other folders are located, including all your contacts, messages...
you should sync your pim data (contacts, tasks, appointments...) either with outlook (that does not save your sms!) or with MS myphone (saves all) or pimbackup (saves all) and save your ringtones and possible photos stored internally, you can backup those files either with ms myphone as well or just copy and paste them to the storage card.
also, remember, a hard reset will delete all the programs installed and their respective settings, so keep your needed cab files present.
setting up the device after the hard reset will take some time, keep that in mind, but if you actually never performed one before, you will realise a huge improvement in speed.
Ok thank you very much.
I will preform a hard reset tonight so I can use it soon again ^^.
The data standing on my internal storage isn't usefull anymore. It's already on my pc so when I get home, I'll hard reset it right away!
Speed improvement is alway's welcome!
I'll let you know if my phone works again.
Thanks.
Wauw it worked perfectly!
The hard rest of my phone took only a minut, so that was far much better then installing the ROM over and over again!
Thanks for your advice.
yes, reflashing the rom does not really change anything, as long as you don't hard reset after flashing. to keep ypur phone clean and fast and not pollute it with old trash, always perform a hard reset after flashing. it is highly recommended when changing roms, and when staying on the same one, a hard reset can solve nearly any software related issues that appear over time
New problem...
My phone is acting weird again..
The problem is the startup now.
It takes around 5 min to get to the home screen.
but when you think its finaly started, then there appears an error:
Run FILEOP
\windows\Menu_FILEOP_Operator.txt
faild.
What can i do about this?
Hardreset again?
(this would be my 13th time that my phone crashed... i'm becomming crazy..)
can anyone help me with this?
Greets,
Leek1001
1) Backup all PIM data.
2) Preform Task 29(that's the topic showthread.php?t=653604)
3) Flash with the ROM you like
4) Hard reset 1 or 2 times depending of ROM requirements.
5) Restore the PIM data.
6) Have fun
dilqnski said:
1) Backup all PIM data.
2) Preform Task 29(that's the topic showthread.php?t=653604)
3) Flash with the ROM you like
4) Hard reset 1 or 2 times depending of ROM requirements.
5) Restore the PIM data.
6) Have fun
Click to expand...
Click to collapse
What is the advantage off this app Task 29?
because i don't know whats the main problem, so would this solve my problem?
Greets,
leek1001
Task 29 format the main memory of the PPC. Read the topic for more info. From my experience it make wonders
leek1001 said:
What is the advantage off this app Task 29?
because i don't know whats the main problem, so would this solve my problem?
Greets,
leek1001
Click to expand...
Click to collapse
Follow the f***ing link and read the thread. You'll find all the answers there!
motionz said:
Follow the f***ing link and read the thread. You'll find all the answers there!
Click to expand...
Click to collapse
Thank you for reading my entire post instead of the first line....
I say that I don't know what the problem is and nobody gave me an answer. task29 could fix my problem but I still don't know the exact problem...
motionz said:
Follow the f***ing blah blah blah
Click to expand...
Click to collapse
Pr1k...
leek1001, if i was you mate id reflash, remember to hard-reset but if that dont solve your problem, start reading about task29 dude..
raving_nanza said:
leek1001, if i was you mate id reflash, remember to hard-reset but if that dont solve your problem, start reading about task29 dude..
Click to expand...
Click to collapse
I've tried a reflash and afterwards a hardreset but didn't workout.
I'm following the topic about task29 now
I'm going to try it this weekend. thanks.
Well it worked out perfectly!
for everyone having troubles with the ROM's of Kwbr try to update your radio rom version!
I had 1.09 and now I've version 1.17.
men.. if I had done that earlier!
Greets,
Leek1001
...
glad you got yourself sorted dude..
I have downloadec otullas pack but all I get when in Android is a black screen. Can someone please post a step by step guide to using it so I know where I've gone wrong?
stephen1uk said:
I have downloadec otullas pack but all I get when in Android is a black screen. Can someone please post a step by step guide to using it so I know where I've gone wrong?
Click to expand...
Click to collapse
step 1. click the HaRET.exe file ...
step 2.Done.
I don't know what I've done wrong then, I just get a black screen and then a message to do with settings and the option of force close. Any ideas?
stephen1uk said:
I don't know what I've done wrong then, I just get a black screen and then a message to do with settings and the option of force close. Any ideas?
Click to expand...
Click to collapse
seems Android is crashing when it starts..
check this out http://forum.xda-developers.com/showpost.php?p=12060926&postcount=35
and better use this pack
Apparently my card isn't recognised by the formatting program :s
hmmm then it might be card fault...
replace it if u have other one,if not keep trying to format it like i stated in instructions
Looks like I may have to accept it isn't going to work , using the new pack once I have the same issue.
"The aplication settings has stopped working un expectedly. Please try again."
stephen1uk said:
Looks like I may have to accept it isn't going to work , using the new pack once I have the same issue.
"The aplication settings has stopped working un expectedly. Please try again."
Click to expand...
Click to collapse
i got the same message, i close the file explorer (end task from task manager), and i open it again then click haret again.. it works for me. maybe u can try that
Forgive me for being thick but I assume I do this once Android.has booted up? If so how do I access task manager in Android, all I can do is access recently used apps by pressing dial button.
as far as I know,sandisk card is bad support by android on mini.try to get another sd card to test.Good luck!
as far as I know,sandisk card is bad support by android on mini.try to get another sd card to test.Good luck!
stephen1uk said:
Forgive me for being thick but I assume I do this once Android.has booted up? If so how do I access task manager in Android, all I can do is access recently used apps by pressing dial button.
Click to expand...
Click to collapse
No no..what he meant was for WM..close the file explr using task manager...then start the process again
15131331231 said:
as far as I know,sandisk card is bad support by android on mini.try to get another sd card to test.Good luck!
Click to expand...
Click to collapse
card compatibility was not a problem with droid..it was the card formatting prob...alot of other users had the same problem with android not picking up their card including myself...it was corrected by tzacapaca who provided me card format software..with that compatibility issue was resolved.
stephen1uk said:
I don't know what I've done wrong then, I just get a black screen and then a message to do with settings and the option of force close. Any ideas?
Click to expand...
Click to collapse
Just boot without Sim card (Only first boot).
Problem with APN.
sunnyhj said:
card compatibility was not a problem with droid..it was the card formatting prob...alot of other users had the same problem with android not picking up their card including myself...it was corrected by tzacapaca who provided me card format software..with that compatibility issue was resolved.
Click to expand...
Click to collapse
But I met the same problem in the beginning,used to android my mini with sandisk card,but it load android very slowly.when I changed a card,kingston,it load fast.that time I do not know the why.it is only suggestion.sorry for my poor english.
Dears
I have faced the same problem, I tried to format the SD card several times but didn’t work.
I solved it by changing the SD card and it work like a charm (change SD card )
Best regards