How to: adjust the contrast? - Windows Mobile Development and Hacking General

Hi all!
I just wonder if it's possible to adjust the contrast on my HTC Touch (Elf) ?
I'm not happy with the contrast-level on my device. Maybe an registry-hack, or something?
Thanx in advance=)

BazookaAce said:
Hi all!
I just wonder if it's possible to adjust the contrast on my HTC Touch (Elf) ?
I'm not happy with the contrast-level on my device. Maybe an registry-hack, or something?
Thanx in advance=)
Click to expand...
Click to collapse
Not with TFT's - it was only possible with (D)STN devices.
There's a registry hack (enabling the Contrast applet in Settings / System), but it doesn't do anything on TFT-based phones.

and is it possible to hack the brightness to more than 100% ?? thx for this answer

OK Thanx for the reply Menneisyys

Related

Weird camera adjust

Someone please confirm or help, do you have same problem?
In camera setting page - advanced - adjust (Like you want to adjust your contrast, hue, brightness, saturation for your camera) I can't setdown the value (Default is 3, I can't set it to 2 or 1) if my today screen is set to potrait. But in landscape (Right or left handed) i can decrease the value.
Any one have same problem, or any fix?
Thanks.
ei mate
i'm sorry but i don't have that issue with my dopod. i tried it out by setting the default to portrait. from there i activated the cam and went to the settings. i could bring it down to 1.
cheers
Thanks for your reply. Anyway can you tell me what is your ROM version? Because i did confirmation to dopod indonesia, and they said all of they DOPOD U1000 have same problem.
Thanks in advanced
cornelius said:
Thanks for your reply. Anyway can you tell me what is your ROM version? Because i did confirmation to dopod indonesia, and they said all of they DOPOD U1000 have same problem.
Thanks in advanced
Click to expand...
Click to collapse
I don't have this issue too, and it's actually the first time i heard this as well. I doubt the confirmation they made is true, since non of the other DOPOD ROM has this issue. Anyway, my ROM Version is 1.24.709.3 EXT: 1.24.709.105
I have the same problem with my U1000.
Portrait mode, settings can only be increased to +4 and +5, but not decreased back down again.
Landscape mode, everything is fine and working. I can decrease as well as increase the levels.
My ROM version is 1.24.707.3
Ext ROM 1.24.707.104
It looks like they have fixed this in the later ROM release as shown by wu's results.
Yes they fix on ROM ver: 1.24.709.3
But on my free pack i got ROM upgrade CD but htis only upgrade my Ext ROM to: 1.24.707.105, only add My connect.
Thanks everyone !!!!
cornelius said:
Thanks for your reply. Anyway can you tell me what is your ROM version? Because i did confirmation to dopod indonesia, and they said all of they DOPOD U1000 have same problem.
Thanks in advanced
Click to expand...
Click to collapse
my rom version is: 1.24.709.3 EXT: 1.24.709.105
hope this helps.
cheers
thanks it's very helpful.
My conclution it's ROM 1.24.707.3 problem's. But I can't find any 1.24.709.3 ROM version in member's dopod home page.
Some help maybe?
Are you guys and gals able to zoom in and out with your camera. Mine does not seem to be able to do so. On the left side of the camera screen, there is a vertical bar which I think is for zooming, but it does not respond to clicking or dragging. Do you have the same problem?
zoom only works if you not use 3Mpix resolution.because it's digital zoom not optical zoom. Maybe some one can hack if zoom will work on 3Mpix but your pict will so pixelated, look bad (Like you using your DigiCam and us digital zoom.). And your zoom avaibility will increase if you use lower pixel.
I think it work like that.
cornelius said:
thanks it's very helpful.
My conclution it's ROM 1.24.707.3 problem's. But I can't find any 1.24.709.3 ROM version in member's dopod home page.
Some help maybe?
Click to expand...
Click to collapse
ei mate
sorry to make matters more complicated =) but a buddy of mine checked his rom and it was 1.24.707.3...and he can adjust the settings with no problems. stumped! =)
Robson said:
ei mate
sorry to make matters more complicated =) but a buddy of mine checked his rom and it was 1.24.707.3...and he can adjust the settings with no problems. stumped! =)
Click to expand...
Click to collapse
1.24.707.3 and 709.3 make no difference, it's for different country, Taiwan has 709. What's inside the ROM should be exactly the same.
Robson said:
ei mate
sorry to make matters more complicated =) but a buddy of mine checked his rom and it was 1.24.707.3...and he can adjust the settings with no problems. stumped! =)
Click to expand...
Click to collapse
really? the contras, hue, saturation and brighness? And don't forget at potrait today screen...
yup, he did the same thing i did...which is what i believe you tried on your unit =)
cheers
Upsss.... this is bad... bad...
Help need?
I sent Email to dopod asia 2 days ago but no respon yet...
yeah, like i said...sorry to make things more complicated =) hope dopod responds to your email or you figure out what's wrong with it.
cheers
Robson said:
yeah, like i said...sorry to make things more complicated =) hope dopod responds to your email or you figure out what's wrong with it.
cheers
Click to expand...
Click to collapse
Ok, thanks
cornelius said:
Thanks for your reply. Anyway can you tell me what is your ROM version? Because i did confirmation to dopod indonesia, and they said all of they DOPOD U1000 have same problem.
Thanks in advanced
Click to expand...
Click to collapse
yes, I have the same problem.
eaglesteve said:
yes, I have the same problem.
Click to expand...
Click to collapse
Actually what is the different between our dopod and their dopod, even someone who use same ROM didn't have this prob?

[APP][TWEAK]Ultimate touch sensitivity !!! EVEN MORE SENSITIVE THEN B4

FOR CAB PLZ VISIT http://forum.xda-developers.com/showthread.php?t=469865
WORKS ON HTC TOUCH SERIES, XPERIA 1, ....., OTHERS I HAVEN'T TESTED MYSELF BUT PLZ TELL ME IF IT DOES!!
I already had the first regedit done but the second seemed to make it even better. Thanks.
Someone could test to change the decimal value to hexadecimal value 7fffffff ? I think it should be better.
jobiatch said:
Someone could test to change the decimal value to hexadecimal value 7fffffff ? I think it should be better.
Click to expand...
Click to collapse
not a huge difference but yeah it is better
it doesnt have to be 80866 right? just spam some omega huge number? like 241341 ? for both. does it harm the system or is there some limit to it?
I am thinking the higher the number the more pressure is required. I read somewhere number "1" was good. We all want a light touch. Almost capacitive.
well i tried it on my tilt and it actually makes the touch screen a little better.
HTC Jade the 3G touch with official name...I see more slowly than before,or at least not a big diff. only in negative way.With other tools you can change it back to normal or you can give other numbers.
with advanced config tool 3.3 the best.!
sorry thx helios
Worked great with Touch Cruise (Polaris).
Thank you!
heliosismagic said:
HTC Jade the 3G touch with official name...I see more slowly than before,or at least not a big diff. only in negative way.With other tools you can change it back to normal or you can give other numbers.
with advanced config tool 3.3 the best.!
sorry thx helios
Click to expand...
Click to collapse
I never found how to change this in advanced config tool 3.3. Can you explain me,please?
Tried this on touch and it's much more fluid. thanks!
Works fine (Kaiser)
It has a remarkable effect on my touch cruise.
thank you
aussiebum said:
not a huge difference but yeah it is better
Click to expand...
Click to collapse
Also on the blackstone. But thanks for sharing.

Registry Editor problem?

Hi guys ... when I use Registry Editor (a GREAT app, btw) I cannot see the complete names in the upper line as shown in attached screencap. I don't know if this is a screen layout problem of WinMo, or a problem of Registry Editor itself ... Not a big thing, I know, but any help will be appreciated.
TIA
Strange ...! Seems that you're using a QVGA resolution?
P.S.:
I'm using the Touch-Mode and I haven't any problems like you!
animelover said:
Strange ...! Seems that you're using a QVGA resolution?
P.S.:
I'm using the Touch-Mode and I haven't any problems like you!
Click to expand...
Click to collapse
Settings\Device Info shows display resolution as being 480x800 ... afaik, that would be WVGA?

[REQ] How to Break 100db sound limit on EUROPEAN ROM

Hello everyone,
I want to know how to Break the 100db sound limit on EUROPEANS ROM.
The Blackstone CAB (Audio_Full_Boost.cab) dont work with LEO
It's a very anoying issue.
Best regards to all.
Thierry
just a little up
Have a tinker here
HKLM\drivers\builtin\wavedev
There are two settings that look possibly interesting.
sysmaxvolume
and
appmaxvolume
though they do appear to be connected to bluetooth...
Course, i accept no rsponsibility if you burst your speaker/eardrums.
See here:
http://forum.xda-developers.com/showpost.php?p=5288234&postcount=15
​
yep up this ....i also want more volume on my tunes !!!
Thanks to samsamuel and tkalli for answer.
I will try this.
Thierry
thierryjc said:
Hello everyone,
I want to know how to Break the 100db sound limit on EUROPEANS ROM.
The Blackstone CAB (Audio_Full_Boost.cab) dont work with LEO
It's a very anoying issue.
Best regards to all.
Thierry
Click to expand...
Click to collapse
I think it doesn't work as the audio is already boosted by HTC. Which explains the noticeable distortion at high volumes, and the lack of low volumes, i.e. it goes straight from 0% to about 15% volume, which only happens after artificially boosting the volume.
Heck boost this speaker any louder and the distortion would just keep on getting even worse
Hi,
they have tested with reg entries?
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev]
"AcousticFile"="\windows\AudioPara3.csv"
with frienldy greet
starbase64
starbase64 said:
Hi,
they have tested with reg entries?
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev]
"AcousticFile"="\windows\AudioPara3.csv"
with frienldy greet
starbase64
Click to expand...
Click to collapse
Thanks starbase64 for reply, unfortunatly this tweak work only with WWE ROM.
I had trying it but without success.
Regards
Thierry
tHIS FILE "\windows\AudioPara3.csv" does not exist on my HD2.
Where is it possible to find it
Thanks
Paterr said:
tHIS FILE "\windows\AudioPara3.csv" does not exist on my HD2.
Where is it possible to find it
Thanks
Click to expand...
Click to collapse
Search for this cab: AudioBoostPack, its for Blackstone but work fine on Leo WWE ROM.
Thierry
Still no hope for non WWE roms ??
Thanks
Stephane
is someone tried this?
there is
[HKEY_LOCAL_MACHINE\ DRIVERS \BuiltIn\ WaveDev] ,,acoustic file" = sys max volume 6.
what would happen if this sys max volume change to larger number 7 or 8 ,maybe it can enable audio para3.csv to take effect?

Bluetooth improvement

Dear all,
Is somoene knows how to increase quality audio of bluetooth headset directly from HD2 setting ?
I would like to know whitch registry's key allows to control, for example, the value of the bitpool whithout using any tweak tools.
Thx u for urs anwser,
ironlg said:
Dear all,
Is somoene knows how to increase quality audio of bluetooth headset directly from HD2 setting ?
I would like to know whitch registry's key allows to control, for example, the value of the bitpool whithout using any tweak tools.
Thx u for urs anwser,
Click to expand...
Click to collapse
Do you consider registry editor as a tweak tool?
Registry tools
vponomarev said:
Do you consider registry editor as a tweak tool?
Click to expand...
Click to collapse
Obviously not !!! I spoke tweaks like hd tweak or tf3 config, etc...
ironlg said:
Obviously not !!! I spoke tweaks like hd tweak or tf3 config, etc...
Click to expand...
Click to collapse
Any specific reason why you are opposing such tools? Think of them as sophisticated registry editors.

Categories

Resources