Weird camera adjust - Advantage X7500, MDA Ameo General

Someone please confirm or help, do you have same problem?
In camera setting page - advanced - adjust (Like you want to adjust your contrast, hue, brightness, saturation for your camera) I can't setdown the value (Default is 3, I can't set it to 2 or 1) if my today screen is set to potrait. But in landscape (Right or left handed) i can decrease the value.
Any one have same problem, or any fix?
Thanks.

ei mate
i'm sorry but i don't have that issue with my dopod. i tried it out by setting the default to portrait. from there i activated the cam and went to the settings. i could bring it down to 1.
cheers

Thanks for your reply. Anyway can you tell me what is your ROM version? Because i did confirmation to dopod indonesia, and they said all of they DOPOD U1000 have same problem.
Thanks in advanced

cornelius said:
Thanks for your reply. Anyway can you tell me what is your ROM version? Because i did confirmation to dopod indonesia, and they said all of they DOPOD U1000 have same problem.
Thanks in advanced
Click to expand...
Click to collapse
I don't have this issue too, and it's actually the first time i heard this as well. I doubt the confirmation they made is true, since non of the other DOPOD ROM has this issue. Anyway, my ROM Version is 1.24.709.3 EXT: 1.24.709.105

I have the same problem with my U1000.
Portrait mode, settings can only be increased to +4 and +5, but not decreased back down again.
Landscape mode, everything is fine and working. I can decrease as well as increase the levels.
My ROM version is 1.24.707.3
Ext ROM 1.24.707.104
It looks like they have fixed this in the later ROM release as shown by wu's results.

Yes they fix on ROM ver: 1.24.709.3
But on my free pack i got ROM upgrade CD but htis only upgrade my Ext ROM to: 1.24.707.105, only add My connect.
Thanks everyone !!!!

cornelius said:
Thanks for your reply. Anyway can you tell me what is your ROM version? Because i did confirmation to dopod indonesia, and they said all of they DOPOD U1000 have same problem.
Thanks in advanced
Click to expand...
Click to collapse
my rom version is: 1.24.709.3 EXT: 1.24.709.105
hope this helps.
cheers

thanks it's very helpful.
My conclution it's ROM 1.24.707.3 problem's. But I can't find any 1.24.709.3 ROM version in member's dopod home page.
Some help maybe?

Are you guys and gals able to zoom in and out with your camera. Mine does not seem to be able to do so. On the left side of the camera screen, there is a vertical bar which I think is for zooming, but it does not respond to clicking or dragging. Do you have the same problem?

zoom only works if you not use 3Mpix resolution.because it's digital zoom not optical zoom. Maybe some one can hack if zoom will work on 3Mpix but your pict will so pixelated, look bad (Like you using your DigiCam and us digital zoom.). And your zoom avaibility will increase if you use lower pixel.
I think it work like that.

cornelius said:
thanks it's very helpful.
My conclution it's ROM 1.24.707.3 problem's. But I can't find any 1.24.709.3 ROM version in member's dopod home page.
Some help maybe?
Click to expand...
Click to collapse
ei mate
sorry to make matters more complicated =) but a buddy of mine checked his rom and it was 1.24.707.3...and he can adjust the settings with no problems. stumped! =)

Robson said:
ei mate
sorry to make matters more complicated =) but a buddy of mine checked his rom and it was 1.24.707.3...and he can adjust the settings with no problems. stumped! =)
Click to expand...
Click to collapse
1.24.707.3 and 709.3 make no difference, it's for different country, Taiwan has 709. What's inside the ROM should be exactly the same.

Robson said:
ei mate
sorry to make matters more complicated =) but a buddy of mine checked his rom and it was 1.24.707.3...and he can adjust the settings with no problems. stumped! =)
Click to expand...
Click to collapse
really? the contras, hue, saturation and brighness? And don't forget at potrait today screen...

yup, he did the same thing i did...which is what i believe you tried on your unit =)
cheers

Upsss.... this is bad... bad...
Help need?
I sent Email to dopod asia 2 days ago but no respon yet...

yeah, like i said...sorry to make things more complicated =) hope dopod responds to your email or you figure out what's wrong with it.
cheers

Robson said:
yeah, like i said...sorry to make things more complicated =) hope dopod responds to your email or you figure out what's wrong with it.
cheers
Click to expand...
Click to collapse
Ok, thanks

cornelius said:
Thanks for your reply. Anyway can you tell me what is your ROM version? Because i did confirmation to dopod indonesia, and they said all of they DOPOD U1000 have same problem.
Thanks in advanced
Click to expand...
Click to collapse
yes, I have the same problem.

eaglesteve said:
yes, I have the same problem.
Click to expand...
Click to collapse
Actually what is the different between our dopod and their dopod, even someone who use same ROM didn't have this prob?

Related

Screen Rotation for Dummies (SRS)

Hi,
This is seems to be the last version of our magic tool - Screen Rotation Service (or SRS). It includes Second Edition's Today Theme (menu & today scrollers support in landscape) and feature to automatically resize your today screen for Landscape Theme!
(Download it here: setup.armv4.exe)
During installation you will need to answer "Yes" to this message:
Code:
The file"\Windows\ace_ddi.dll" is hidden, read-only, or a system file. Would you like to replace the existing file?
After installation you need to go to: [Start menu] - [Settings] - [Today] and select "WMSE" theme from the list
And one more, minimize (X) your programs before switching
Thanx to abc and everyone here!
Re: SRS HE = Halloween Edition
Feel free to post your feedback/questions on this version of SRS to this thread
More recommendations that i remember about SRS:
1) Do not soft-reset your device when in landscape-mode
2) Minimize (X) your programs when switching between different modes
To install SRS-HE:
1] Download SRS-HE to your PC
2] Run it to get "setup.armv4.cab"
3] Copy this file to your PDA
4] Tap on it to install SRS-HE
5] Soft-reset your device
6] Go to [Start Menu] -> [Settings] -> [Today]
7] Select "Wmse" Theme from the list
8] Use [Start Menu]->[Settings]->[SRS] to switch the modes
SRS Support Team ;-)
Another thread about SRS? Which is the main one?
So does this version still demand ROM 1.72?
SiliconS said:
So does this version still demand ROM 1.72?
Click to expand...
Click to collapse
No it is installable on any Himalaya device with any combinations of ROM, radio and ExtROMs
If it doesn't run at your specific system, you can always uninstall it without any damage. It really worth to try!
Yeah, I have ROM 1.60 (latest O2 UK rom) and it didn't work very well at all. Half the OS had problems, including the camera (even v2.5), the Today screen and many of the Control Panel applets.
I've seen reports on this site of people having fewer problems with ROM 1.66, but I don't think anybody has claimed that they've got it working with ROM 1.60 without problems.
Still, I'm hoping O2 UK are going to release 1.72 tomorrow!
SiliconS said:
Yeah, I have ROM 1.60 (latest O2 UK rom) and it didn't work very well at all. Half the OS had problems, including the camera (even v2.5), the Today screen and many of the Control Panel applets.
Click to expand...
Click to collapse
Where did you get such ROM version? And why you are not moving to 1.72? It doesn't really matter who the supplier of the ExtRom is (imate, qtec, tmob...) it is a matter of OS rom content. So, just update your device and receive a set of 1.72 advantages (faster BT binding, greater performance, no good CT and so on)
SiliconS said:
I've seen reports on this site of people having fewer problems with ROM 1.66, but I don't think anybody has claimed that they've got it working with ROM 1.60 without problems.
Click to expand...
Click to collapse
Did you install it yourself or just looked through the old posts?
SiliconS said:
Still, I'm hoping O2 UK are going to release 1.72 tomorrow!
Click to expand...
Click to collapse
No updates so far...
Everything seems to work fine...
But now it's very important to have phone app, calc app, WMP and cam app setted to run in landscape mode.
AVP said:
SiliconS said:
Yeah, I have ROM 1.60 (latest O2 UK rom) and it didn't work very well at all. Half the OS had problems, including the camera (even v2.5), the Today screen and many of the Control Panel applets.
Click to expand...
Click to collapse
Where did you get such ROM version? And why you are not moving to 1.72? It doesn't really matter who the supplier of the ExtRom is (imate, qtec, tmob...) it is a matter of OS rom content. So, just update your device and receive a set of 1.72 advantages (faster BT binding, greater performance, no good CT and so on)
Click to expand...
Click to collapse
I got the update from my service provider: O2 in the UK. It's the latest version available, at the moment. I don't need all the hassle of messing about with ROMs from other countries and providers. I'll wait until the next ROM is released by O2 for me. (Tomorrow.)
AVP said:
SiliconS said:
I've seen reports on this site of people having fewer problems with ROM 1.66, but I don't think anybody has claimed that they've got it working with ROM 1.60 without problems.
Click to expand...
Click to collapse
Did you install it yourself or just looked through the old posts?
Click to expand...
Click to collapse
I installed the latest version last Thursday as posted by abc, i.e. before this site got borked. I posted a long reply to the original SRS thread with my feedback, but it got lost. :roll:
asci said:
But now it's very important to have phone app, calc app, WMP and cam app setted to run in landscape mode.
Click to expand...
Click to collapse
I think unapproachable2k found how to fix this. He created LS skins but I couldn't figure out where to place them (see srs:... thread)
I think unapproachable2k found how to fix this. He created LS skins but I couldn't figure out where to place them (see srs:... thread)
Click to expand...
Click to collapse
Well I guess the skins are not all we need to have them work in landscape mode. What we need are dll files who "teach" to app what skin to chose... :roll:
SiliconS said:
I got the update from my service provider: O2 in the UK. It's the latest version available, at the moment. I don't need all the hassle of messing about with ROMs from other countries and providers. I'll wait until the next ROM is released by O2 for me. (Tomorrow.)
Click to expand...
Click to collapse
Did you contact with them? And what about WM2003SE update? Please tell me they will do this also!!!
SiliconS said:
I installed the latest version last Thursday as posted by abc, i.e. before this site got borked. I posted a long reply to the original SRS thread with my feedback, but it got lost. :roll:
Click to expand...
Click to collapse
The version in this thread doesn't fix some control panel applets but does well on start menu & today screen
asci said:
Well I guess the skins are not all we need to have them work in landscape mode. What we need are dll files who "teach" to app what skin to chose... :roll:
Click to expand...
Click to collapse
He posted that too and i got stuck with all this stuff much deeper
Now I use Pocket Winamp instead of WMP
Excel instead of Calc
Camera is ok if in portrait
And i dial 789 by pressing between 456 and bottom toolbar Had no zero numbers yet
He posted that too and i got stuck with all this stuff much deeper
Click to expand...
Click to collapse
If I remember in that post there was no dll file. However I think that post is lost...
Camera is ok if in portrait
Click to expand...
Click to collapse
Yes but I can't see control buttons, just switch off one
or did I was wrong?
dlls
Here is a link to dlls for WMP (dlls)
or did I was wrong?
Click to expand...
Click to collapse
When in camera use "Contacts" hotkey to switch camera's modes...
Does the camera work the same on pda2k? They have 2.5, do they?
To clarify: As I said in http://forum.xda-developers.com/viewtopic.php?p=63690#63690 ,the Dll's modded files are not complete,THEY ARE NOT WORKING,we need to manage theme more.. more dll's,more registry keys..
So I posted it there hoping in someone help.
unapproachable2kx said:
To clarify: As I said in http://forum.xda-developers.com/viewtopic.php?p=63690#63690 ,the Dll's modded files are not complete,THEY ARE NOT WORKING,we need to manage theme more.. more dll's,more registry keys..
So I posted it there hoping in someone help.
Click to expand...
Click to collapse
Is it possible to port Control Panel from SE?
Thanx
Sure it can..
But I am not that smart to port it..
This work is need to someone like ABC.. 8)
I have a sugestion for all of ya, I have SRS instaled on my mda II, and I like it, but don't ever set an alarm in landscape mode, my MDA was playing the stupid melody for quite a long before it stoped.
The reason is that there were no snoose an dismiss button.
Even a soft-reset won't help.
Maybe the action button, but mine stoped by itself.
gotcha_mdaII said:
Even a soft-reset won't help
Click to expand...
Click to collapse
Gee, you're lucky coz there waz guy who made hard-reset to fix this
But all u need to do is just press your joystick
[OT] Where is ABC? is AVP the same of ABC or not? We need ABC back!
:roll: :roll: :roll:

GSen (SKKV Software)

Anyone tried this app on the athena? (as it also has an accelerometer) If so does it work?
http://s-k-tools.com/index.html?m_util.html#gsen
Would be brilliant if it works but my hopes aren't high as I couldn't find anything on the topic.
billu said:
Anyone tried this app on the athena? (as it also has an accelerometer) If so does it work?
http://s-k-tools.com/index.html?m_util.html#gsen
Would be brilliant if it works but my hopes aren't high as I couldn't find anything on the topic.
Click to expand...
Click to collapse
looks like a nice tool, but after I installed on my Ameo I tried to use GSen Version 1.40.
But a window popup with following message :
cannot connect to GSensor (1)
mhh, doesn't run on Ameo ... and delete it ...
Ameo, t-mobile ROM version 6
btw: I've now asked the developer why GSen is not running on Ameo ... hope I get an answer..
Accelerometer
Hey,
I've installed it on my HTC Advantage X7510 with WM6.! Professional, and I can confirm that it works.
When I'm in the today screen and I turn the PDA it does turn in Landscape and Portrait mode with no problem great at last it works.
Thanks for the link if anybody what's me to try anything please let me known.
Thanks
Gigino
I am happy for you gigino, but I am in the same boat as palmchen (have a X7500 with t-mobile WM6 ROM).
Perhaps the interface to the sensor is slightly different between WM6 and 6.1
I am sure it can't be that difficult to access it from WM6. Hopefully the developer will be able to implement it or give some clue which will assist some brainbox from this community in hacking this version to get working with WM6. In my eyes this is one of those killer apps.
I tried this on wm6.1, and had the same error message.
IMO the answer is simple: it works using HTC VUEFLO .dll. X7510 has those dll, x7500 doesn't!
In AP4 or AP5 it will work
sergiopi said:
IMO the answer is simple: it works using HTC VUEFLO .dll. X7510 has those dll, x7500 doesn't!
In AP4 or AP5 it will work
Click to expand...
Click to collapse
mhh, simple question?
could you please provide the new vueflo.dll for the old devices ?
If it only a dll to change that should be not a problem, or ?
btw: I've asked the developer, but he told me that he is to busy and have no time in the moment to update this programm.
Thanks for this. It is a great find. Works well with my X7510.
This is a must have application for the X7510. It is just amazing.
cktlcmd said:
Thanks for this. It is a great find. Works well with my X7510.
This is a must have application for the X7510. It is just amazing.
Click to expand...
Click to collapse
For some it is a must have. For others, it is an annoyance and irritation.
only because we can't get it working!
Sorry guys, we doesn´t have these devices for testing.
We just was surprised about the info, our tool is working on HTC Advantage X7510.
Also we not know the reason why it is not working on HTC Advantage X7500.
Possible reasons:
- missing/different software driver
- different ROM/ACU version
- missing needed hardware
As i said, we cannot test because of missing hardware.
billu said:
only because we can't get it working!
Click to expand...
Click to collapse
Not because of that. It was working all right.
I hated this auto rotate thing because 9 out of times the rotate happens against my wish, and it slows my device.
After the initial few minutes of novelty, I was already wanting to switch it off.
eaglesteve said:
Not because of that. It was working all right.
I hated this auto rotate thing because 9 out of times the rotate happens against my wish, and it slows my device.
After the initial few minutes of novelty, I was already wanting to switch it off.
Click to expand...
Click to collapse
for this exit a include/exclude list. check the diamond forum.
http://forum.xda-developers.com/showthread.php?p=2351034#post2351034
AnnaW said:
for this exit a include/exclude list. check the diamond forum.
http://forum.xda-developers.com/showthread.php?p=2351034#post2351034
Click to expand...
Click to collapse
Thanks for the info, but I still far prefer assigning rotate screen to a hardware button and just press that when I want to rotate.
Palmchen said:
mhh, simple question?
could you please provide the new vueflo.dll for the old devices ?
If it only a dll to change that should be not a problem, or ?
btw: I've asked the developer, but he told me that he is to busy and have no time in the moment to update this programm.
Click to expand...
Click to collapse
No, I don't, there are SOME dll, you can find it in the AP4 / AP5 ROM. I agree, the rotation is too slow and the screen rotation is useless and time consuming 90% of time. My brain is much faster in image rotation and my finger is slower than brain but acts only when needed
sergiopi said:
No, I don't, there are SOME dll, you can find it in the AP4 / AP5 ROM. I agree, the rotation is too slow and the screen rotation is useless and time consuming 90% of time. My brain is much faster in image rotation and my finger is slower than brain but acts only when needed
Click to expand...
Click to collapse
mhh, that makes me sadly ...
I would wish it will go faster and will run on my device (german tmobile WM6) ..
sergiopi said:
the rotation is too slow
Click to expand...
Click to collapse
Screen rotation is fast on mine. Might be ROM or today screen related in yours.
The speed you can change in settings: #timeout(value) - default value 1000 ms
Check http://forum.xda-developers.com/showthread.php?p=2351034#post2351034
X7500 (Ameo) with AP4 or AP5
I have tried it, but still I get the message that the gsensor cannot be found.
Edit:
Oeps it just start working. I noticed the veuflo was disabled.
can anyone post those .dll files, so others can use them? thanks

HTC Footprints; possible?

Hi everyone,
I was wondering if the chefs could put the HTC Footprints into their roms?
I've noticed it that Footprint is only available on the newest HTC Cruise.
Altough most chefs uses the ROMS from Diamond2 (now) which doesn't have Footprints, do you think it would be possible to implement it into D2 Rom?
PS: i'm not sure to put it into the ROM dev-section, sorry if it's in the wrong section.
the upcoming release from SE, R3A, is going to feature its own geo-tagging facility through the camera application
mkouk said:
the upcoming release from SE, R3A, is going to feature its own geo-tagging facility through the camera application
Click to expand...
Click to collapse
but it seems there are some problems with the geotagging & i always get "no info" in my information page of the picture.
Does it give the city name or just the coordinates?
Can sombody explain what "footsteps" are?
I asking this myselfe all the time.
mkouk said:
the upcoming release from SE, R3A, is going to feature its own geo-tagging facility through the camera application
Click to expand...
Click to collapse
I think he meant "Footprints", and it's a lot more feature than R3A camera apps that just has geo-tagging.
I had Footprints built-in in my 2.x and 3.x series.
jackleung said:
I think he meant "Footprints", and it's a lot more feature than R3A camera apps that just has geo-tagging.
I had Footprints built-in in my 2.x and 3.x series.
Click to expand...
Click to collapse
Yeah sorry xD
I mean Footprints
Oh I didn't know that ur rom has it
I'll give ur rom a try, but not now. Just flashed it to Itje V5.061
offtopic: Jack, you're from Hong Kong or USA, because you have the flag of HK..Just wondering
****head said:
Yeah sorry xD
I mean Footprints
Oh I didn't know that ur rom has it
I'll give ur rom a try, but not now. Just flashed it to Itje V5.061
offtopic: Jack, you're from Hong Kong or USA, because you have the flag of HK..Just wondering
Click to expand...
Click to collapse
Please fix yr topic then in case anyone would search for the same question.
I was born and raised in Hong Kong but living in USA now.
jackleung said:
Please fix yr topic then in case anyone would search for the same question.
I was born and raised in Hong Kong but living in USA now.
Click to expand...
Click to collapse
Wow really? great
Chinese too, but born & still living in Europe
Hi all,
i'm new in Xperia world and this forum has been very helpfull for me...
I got manila TFL3D installed on my X1.
I tried to install footprint (not very clever, actually) without HD camera installed.
That does not work at all but the problem is not here : i've lost the text in a menu when i open a picture in TFL3D : the options/actions menu at bottom right is empty.
It opens the menu, i can click an action but i can't see the text ! (hard to select an anction without reading anything...)
I uninstalled footprint but it did not come back.... (and yes i've soft reset)
What can I do ? Except uninstall/reinstall manila ?
Thanks,
(sorry for my english i'm French...)
I've cabbed footprints. it's on the forum, you need a rom with one of the HTC cameras in it..
fards said:
I've cabbed footprints. it's on the forum, you need a rom with one of the HTC cameras in it..
Click to expand...
Click to collapse
You referring to this? Nothing seems to happen after I tap on 'Menu > New' though. Did a soft reset, copied the HtcCameraUtility.dll to my Windows folder and checked my registry settings, and even tried installing gtrab's R3A CAMERA but still doesn't work. Something else I missed out? Or does it only work on Touch-IT? Btw, I'm on stock R3A.
ipporek said:
You referring to this? Nothing seems to happen after I tap on 'Menu > New' though. Did a soft reset, copied the HtcCameraUtility.dll to my Windows folder and checked my registry settings, and even tried installing gtrab's R3A CAMERA but still doesn't work. Something else I missed out? Or does it only work on Touch-IT? Btw, I'm on stock R3A.
Click to expand...
Click to collapse
yup. i've only tried it on roms with a htc camera built in, so I've no idea if it will work with stock and a cab.
using that cab, you dont need to copy htccamerautility as a working one is included, but it would be best to install the htc camera first..
what you can check is that the camera.exe in windows is not the SE one.. The SE is a dummy file to trigger CameraRunner.exe
[edit]
I've just reread what you posted... the R3a camera WILL NOT work, it needs HTC CAMERA..
fards said:
yup. i've only tried it on roms with a htc camera built in, so I've no idea if it will work with stock and a cab.
using that cab, you dont need to copy htccamerautility as a working one is included, but it would be best to install the htc camera first..
what you can check is that the camera.exe in windows is not the SE one.. The SE is a dummy file to trigger CameraRunner.exe
[edit]
I've just reread what you posted... the R3a camera WILL NOT work, it needs HTC CAMERA..
Click to expand...
Click to collapse
Is it just any HTC camera? Or only those for Rhodium/Topaz? And if convenient, could you point me to where I could find it? Tried searching but couldn't seem to find any for Rhodium/Topaz.
By the way, I saw you mention in another thread that you use both the SE and HTC camera. You mean that's possible?
Edit: Found 2 versions of the Topaz camera, but after installing, got the error message below when I tried running the 'HTC Camera' program that appeared:
'The file 'Camera' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring the file.'
Edit2: Btw, I did try installing the rhodium MHub.cab and also checked the 3 registry entries but still no use.
And by the way, I suppose the Rhodium camera not working is also why I can't launch the camera from the Photos and Videos tab in TF3D (using Daran's TF3DB3).
fards said:
I've cabbed footprints. it's on the forum, you need a rom with one of the HTC cameras in it..
Click to expand...
Click to collapse
Thanks for your answer.
I got a stock rom for the moment. Maybe i'll change it in a few weeks, with everything working ! (hopfully)
The reason the HTC camera doesn't work is that it needs lots of support files, It's just easier to use one cooked into a rom..
If you really want core stuff from HTC devices to work on the X1 then use a cooked rom.. It's simpler, more efficient and you know it'll work...
fards said:
The reason the HTC camera doesn't work is that it needs lots of support files, It's just easier to use one cooked into a rom..
If you really want core stuff from HTC devices to work on the X1 then use a cooked rom.. It's simpler, more efficient and you know it'll work...
Click to expand...
Click to collapse
Can I assume that you used a cooked ROM (so as to have the HTC camera) and then separately installed the SE camera?
Anyway I've been contemplating switching to a cooked ROM for a while .Just worried that switching back to stock (for servicing purposes) would not be possible. Btw, can I assume Footprints will work on Touch-IT?
ipporek said:
Can I assume that you used a cooked ROM (so as to have the HTC camera) and then separately installed the SE camera?
Click to expand...
Click to collapse
I believed both Itje and mine have BOTH camera apps built-in. And if you really dare to read previous post in this thread. I even have footprint built-in as well and you don't have to do anything any all
Anyway I've been contemplating switching to a cooked ROM for a while .Just worried that switching back to stock (for servicing purposes) would not be possible.
Click to expand...
Click to collapse
Please search. There is a thread for this in rom section already.
jackleung said:
I believed both Itje and mine have BOTH camera apps built-in. And if you really dare to read previous post in this thread. I even have footprint built-in as well and you don't have to do anything any all
Please search. There is a thread for this in rom section already.
Click to expand...
Click to collapse
Ya. Saw your post about Footprints in your ROM. And uh, ya, I did kind of see a mention of restoring to stock ROM, just that still had some things I still wasn't too sure about it (like what 'stock radio' is and where to get it). But guess I'd probably just give it a try.

screen going white when taking photo

Hi,
After you press the icon it autofocusses and then the screen dims white and then you can hear the click. The photo is ok.
If I do this in panoramic mode it seems ok.
Anyone ever had this issue or a fix?
thx
Yep, that's how it works! Think this started from the camera software port from the Topaz or Rhodium devices so I assume you have a custom rom?
crankshaft said:
Yep, that's how it works! Think this started from the camera software port from the Topaz or Rhodium devices so I assume you have a custom rom?
Click to expand...
Click to collapse
Thanks for the answer crankshaft. Yup custom rom.
Any way to revert it since it buggers the hell out of me?
search and down load the cab file for origional blackstone camera
EDIT
here you go http://miri.warsoft.com/cabs/Miri_BlackStone_Camera.cab
-PiLoT- said:
search and down load the cab file for origional blackstone camera
EDIT
here you go http://miri.warsoft.com/cabs/Miri_BlackStone_Camera.cab
Click to expand...
Click to collapse
Hi PiLoT, you saved my ... nightrest.
Checked out the forum but guess my keywords did not make it.
I wonder why they changed that since it makes it look .. weird and uncomfortable.
IMHO its slighlty fast autofocus
well i seem to get faster autofocus anyway
Yeah, I always felt the new camera software was faster when taking snaps. Not to bothered about the white screen personally.

ROM 1.66 versus 1.48

Hi all,
The Dutch version of the 1.66 ROM has just been released and I would like to know what are the main differences between 1.48 and 1.66. Is it worth to upgrade and install everything again (a hell of a job).
Tnaks in advance, Kuzibri
I think the best thing for you would be reading through this forum... There are at least 10 threads that handle your "issue".
I know, I have done that for most of them, but I'm, of course, mainly interested in the findings of members that already used the leaked Dutch version. There seems to be differences in ROMS between countries.
The biggest changes are:
* SMS Bug fixed
* Lock Screen works now
* Proximity Sensor seems to work all the time now
* Device runs smoother
at least for me
thanks for your kind and fast reply.
The dutch version is out :O Thanks for telling, vriend
I would like to know if 1.66 is worth it or not as well. Talking about the Dutch version. Also a noob question: all your installed programs (games, tweaks, etc) will be gone right? Everything that is on your SD card will not get removed I assume? And will all programs work normal or do we have to wait for all the programs to get updated to roon on 1.66?
Would appriciate the help! Kind regards.
Games, Tweaks, etc will be deleted! SD is untouched..
Most/all of the programs work! There is an issue with the battery % indicator but theres already a fix for it!
Before you upgrade, backup your contacts,calender and other important stuff ( notes or whatever)
waxfresh said:
Games, Tweaks, etc will be deleted! SD is untouched..
Most/all of the programs work! There is an issue with the battery % indicator but theres already a fix for it!
Before you upgrade, backup your contacts,calender and other important stuff ( notes or whatever)
Click to expand...
Click to collapse
Thank you very much for this information. Will have to search for that battrty % fix because I use a custom notifications bar (the default one is ugly imo) which includes a nice 1% battery indicator.
So overall, it is good to go 1:66. Just going to have to start over after upgrading. Maybe a good thing so I can get rid of all the junk I dont use: a general cleening process
XDA mark said:
Thank you very much for this information. Will have to search for that battrty % fix because I use a custom notifications bar (the default one is ugly imo) which includes a nice 1% battery indicator.
So overall, it is good to go 1:66. Just going to have to start over after upgrading. Maybe a good thing so I can get rid of all the junk I dont use: a general cleening process
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=584772
There you go
1.66 seems to hang more if you still revert to the old SMS GUI...
denizenx said:
1.66 seems to hang more if you still revert to the old SMS GUI...
Click to expand...
Click to collapse
what do you mean exactly by that?
kuzibri said:
Hi all,
The Dutch version of the 1.66 ROM has just been released and I would like to know what are the main differences between 1.48 and 1.66. Is it worth to upgrade and install everything again (a hell of a job).
Tnaks in advance, Kuzibri
Click to expand...
Click to collapse
Where did you find the rom? it isn't on the support page?
take a look here:
http://www.htc.com/nl/SupportViewNews.aspx?dl_id=863&news_id=526
succes
bodelier said:
Where did you find the rom? it isn't on the support page?
Click to expand...
Click to collapse
you're absolutely right by that. But the link is here:
http://www.htc.com/nl/supportdownloadlist.aspx?p_id=297&act=sd&cat=2
A bit weird though that this ROM update is not present on the general HD2 support site (where you normally can find all updates for the HD2), but that it is placed(you would almost say: is hidden) in the ROM update category.
Thanks... works like a charm!
bodelier said:
Thanks... works like a charm!
Click to expand...
Click to collapse
have not yet the time/possibility to upgrade. What are the main differences between 1.48 and 1.66?
denizenx said:
1.66 seems to hang more if you still revert to the old SMS GUI...
Click to expand...
Click to collapse
same for me!
It doesn't run as smooth like in the old version, lags many times
maybe a radio change would help?
Which Radio would be better on this Stock rom? Does it hurt the device software?
romskii said:
same for me!
It doesn't run as smooth like in the old version, lags many times
maybe a radio change would help?
Which Radio would be better on this Stock rom? Does it hurt the device software?
Click to expand...
Click to collapse
Had same problem, re-installed and now works wonders
erosennin said:
Had same problem, re-installed and now works wonders
Click to expand...
Click to collapse
are you sure? it is always a big prozess to reinstall also all software etc. or would a radio update fix that?
erosennin said:
Had same problem, re-installed and now works wonders
Click to expand...
Click to collapse
Hello,
Should I flash the 1.66 ROM to my HD2 (romania)?
The official web download said that the update does not apply to my serial no.
I experience hang-outs especially after ending a telephone conversation.
Please help.
Horia Cazan

Categories

Resources