FOR CAB PLZ VISIT http://forum.xda-developers.com/showthread.php?t=469865
WORKS ON HTC TOUCH SERIES, XPERIA 1, ....., OTHERS I HAVEN'T TESTED MYSELF BUT PLZ TELL ME IF IT DOES!!
I already had the first regedit done but the second seemed to make it even better. Thanks.
Someone could test to change the decimal value to hexadecimal value 7fffffff ? I think it should be better.
jobiatch said:
Someone could test to change the decimal value to hexadecimal value 7fffffff ? I think it should be better.
Click to expand...
Click to collapse
not a huge difference but yeah it is better
it doesnt have to be 80866 right? just spam some omega huge number? like 241341 ? for both. does it harm the system or is there some limit to it?
I am thinking the higher the number the more pressure is required. I read somewhere number "1" was good. We all want a light touch. Almost capacitive.
well i tried it on my tilt and it actually makes the touch screen a little better.
HTC Jade the 3G touch with official name...I see more slowly than before,or at least not a big diff. only in negative way.With other tools you can change it back to normal or you can give other numbers.
with advanced config tool 3.3 the best.!
sorry thx helios
Worked great with Touch Cruise (Polaris).
Thank you!
heliosismagic said:
HTC Jade the 3G touch with official name...I see more slowly than before,or at least not a big diff. only in negative way.With other tools you can change it back to normal or you can give other numbers.
with advanced config tool 3.3 the best.!
sorry thx helios
Click to expand...
Click to collapse
I never found how to change this in advanced config tool 3.3. Can you explain me,please?
Tried this on touch and it's much more fluid. thanks!
Works fine (Kaiser)
It has a remarkable effect on my touch cruise.
thank you
aussiebum said:
not a huge difference but yeah it is better
Click to expand...
Click to collapse
Also on the blackstone. But thanks for sharing.
Related
hi folk... first thanks to everybody... it is very good to have a place like this.... I have decided to buy an universal today... do you know any software problems on vga display... like tomtom or resco file explorer...
both of those work fine for me
Midget_1990 said:
both of those work fine for me
Click to expand...
Click to collapse
thanks for quick answer... it was a big help...
But do remember that Full VGA mode is a hack, unsupported. Apps may work, they may not. Most do work fine.
V
vijay555 said:
But do remember that Full VGA mode is a hack, unsupported. Apps may work, they may not. Most do work fine.
V
Click to expand...
Click to collapse
thanks vijay555, but I don't understand what you mean... what do you mean with full vga is a hack... by the way, I have bought it : ) it is a very nice toy with a fantastic display... and it is so quick as my BA....
v is refering (can't spell it - damn dyslexia) to a hack that is avaliable that makes the screen size 4 x bigger, this is quite nice for fitting more information ont he screen but remember everything is 4x smaller and hard to read. also resco explorere doesnt work with the hack (takes up 1/4 of the screen). tomtom has no problem.
rind9 said:
thanks vijay555, but I don't understand what you mean... what do you mean with full vga is a hack...
Click to expand...
Click to collapse
see for example http://www.aximsite.com/boards/showthread.php?t=98163
Anyone tried this app on the athena? (as it also has an accelerometer) If so does it work?
http://s-k-tools.com/index.html?m_util.html#gsen
Would be brilliant if it works but my hopes aren't high as I couldn't find anything on the topic.
billu said:
Anyone tried this app on the athena? (as it also has an accelerometer) If so does it work?
http://s-k-tools.com/index.html?m_util.html#gsen
Would be brilliant if it works but my hopes aren't high as I couldn't find anything on the topic.
Click to expand...
Click to collapse
looks like a nice tool, but after I installed on my Ameo I tried to use GSen Version 1.40.
But a window popup with following message :
cannot connect to GSensor (1)
mhh, doesn't run on Ameo ... and delete it ...
Ameo, t-mobile ROM version 6
btw: I've now asked the developer why GSen is not running on Ameo ... hope I get an answer..
Accelerometer
Hey,
I've installed it on my HTC Advantage X7510 with WM6.! Professional, and I can confirm that it works.
When I'm in the today screen and I turn the PDA it does turn in Landscape and Portrait mode with no problem great at last it works.
Thanks for the link if anybody what's me to try anything please let me known.
Thanks
Gigino
I am happy for you gigino, but I am in the same boat as palmchen (have a X7500 with t-mobile WM6 ROM).
Perhaps the interface to the sensor is slightly different between WM6 and 6.1
I am sure it can't be that difficult to access it from WM6. Hopefully the developer will be able to implement it or give some clue which will assist some brainbox from this community in hacking this version to get working with WM6. In my eyes this is one of those killer apps.
I tried this on wm6.1, and had the same error message.
IMO the answer is simple: it works using HTC VUEFLO .dll. X7510 has those dll, x7500 doesn't!
In AP4 or AP5 it will work
sergiopi said:
IMO the answer is simple: it works using HTC VUEFLO .dll. X7510 has those dll, x7500 doesn't!
In AP4 or AP5 it will work
Click to expand...
Click to collapse
mhh, simple question?
could you please provide the new vueflo.dll for the old devices ?
If it only a dll to change that should be not a problem, or ?
btw: I've asked the developer, but he told me that he is to busy and have no time in the moment to update this programm.
Thanks for this. It is a great find. Works well with my X7510.
This is a must have application for the X7510. It is just amazing.
cktlcmd said:
Thanks for this. It is a great find. Works well with my X7510.
This is a must have application for the X7510. It is just amazing.
Click to expand...
Click to collapse
For some it is a must have. For others, it is an annoyance and irritation.
only because we can't get it working!
Sorry guys, we doesn´t have these devices for testing.
We just was surprised about the info, our tool is working on HTC Advantage X7510.
Also we not know the reason why it is not working on HTC Advantage X7500.
Possible reasons:
- missing/different software driver
- different ROM/ACU version
- missing needed hardware
As i said, we cannot test because of missing hardware.
billu said:
only because we can't get it working!
Click to expand...
Click to collapse
Not because of that. It was working all right.
I hated this auto rotate thing because 9 out of times the rotate happens against my wish, and it slows my device.
After the initial few minutes of novelty, I was already wanting to switch it off.
eaglesteve said:
Not because of that. It was working all right.
I hated this auto rotate thing because 9 out of times the rotate happens against my wish, and it slows my device.
After the initial few minutes of novelty, I was already wanting to switch it off.
Click to expand...
Click to collapse
for this exit a include/exclude list. check the diamond forum.
http://forum.xda-developers.com/showthread.php?p=2351034#post2351034
AnnaW said:
for this exit a include/exclude list. check the diamond forum.
http://forum.xda-developers.com/showthread.php?p=2351034#post2351034
Click to expand...
Click to collapse
Thanks for the info, but I still far prefer assigning rotate screen to a hardware button and just press that when I want to rotate.
Palmchen said:
mhh, simple question?
could you please provide the new vueflo.dll for the old devices ?
If it only a dll to change that should be not a problem, or ?
btw: I've asked the developer, but he told me that he is to busy and have no time in the moment to update this programm.
Click to expand...
Click to collapse
No, I don't, there are SOME dll, you can find it in the AP4 / AP5 ROM. I agree, the rotation is too slow and the screen rotation is useless and time consuming 90% of time. My brain is much faster in image rotation and my finger is slower than brain but acts only when needed
sergiopi said:
No, I don't, there are SOME dll, you can find it in the AP4 / AP5 ROM. I agree, the rotation is too slow and the screen rotation is useless and time consuming 90% of time. My brain is much faster in image rotation and my finger is slower than brain but acts only when needed
Click to expand...
Click to collapse
mhh, that makes me sadly ...
I would wish it will go faster and will run on my device (german tmobile WM6) ..
sergiopi said:
the rotation is too slow
Click to expand...
Click to collapse
Screen rotation is fast on mine. Might be ROM or today screen related in yours.
The speed you can change in settings: #timeout(value) - default value 1000 ms
Check http://forum.xda-developers.com/showthread.php?p=2351034#post2351034
X7500 (Ameo) with AP4 or AP5
I have tried it, but still I get the message that the gsensor cannot be found.
Edit:
Oeps it just start working. I noticed the veuflo was disabled.
can anyone post those .dll files, so others can use them? thanks
Here is HTC G-Sensor Calibrator extracted from HTC Raphael, works as well on Diamond.
[EDIT] G-Sensor can't be calibred on Diamond since original driver doesn't consider calibration data... We need to port Raphael driver.
Diamond users, I am preparing a big surprise for you...
Enjoy!
Wow, that's awesome !
Thank You
Doesn't seem to work for me. Installed it and ran the calibration.
However, it seemed that it didn't save the calibration for me?
Using bElite 0.95.
It doen't work for me, orginal duch rom.
Its say calibration completed but the bubbels are still not in the middle.
Unfortunately for me too. On Italian Original ROM 1.37 it returns 'Calibration Completed' but after that the left-right bubble turn back un-aligned.
...
What kind a big surprise Schaps, i'm getting so curious!!!
I had the impression it was working the first time I tried... Am I wrong?
Ok I will investigate to get it fully working, I think it should be possible.
I get the same thing. The Horizontal bubble is spot on but the vertical is a tiny bit out.
When you correct it, it says its calibrated then the Vertical bubble goes back to where it was?
Strange.
Nice find tho.
Im using a standard Stock HTC Rom 1.37.405.1 WWE. Not a cooked Rom.
GalliKO said:
What kind a big surprise Schaps, i'm getting so curious!!!
Click to expand...
Click to collapse
You will know more this week-end...
schaps said:
You will know more this week-end...
Click to expand...
Click to collapse
Great, i love suprises! Thanks schaps for all your hardwork and discoveries. I speak for all the Diamond users on here im sure!
guys..how can we really make sure the phone is flat? i tried with my diamond cover off, but if u touch the edge of the phone, you still can feel actually its not firmly flatten right?
BTW..i tried out the calibration tool as well...after re-enter the calibration tool with 1st calibration done, the reading is out again
For me, it does calibrate my G-Sensor, but if i soft reset the device, it come back to the same setting
Schaps, it works flawless in my ATHENA using the X7510/Diamond ROM
Very impressive
Dear,
I try it on my HTC original 1.37.406.1 French the soft is beautiful but can't calibrabe. Hope it did in a few time because it seems to be usefull.
Thank you.
Sorry but no calibation on my german o2 XDA Diamond with the orginal Rom! But i´m sure you guys will solve the problem!
sergiopi said:
Schaps, it works flawless in my ATHENA using the X7510/Diamond ROM
Click to expand...
Click to collapse
The Athena has a LIS302DL G-sensor whereas the Diamond (and Raphael?) has a Kionix KXSD9.
This utility runs on my Diamond, but does not calibrate the sensor. Maybe this utility is only intended for a specific chip?
Will try it! Thanks
Hi schaps, since you are looking at the g sensor and the Raphael, is there any chance do you think of it being possible to get VueFlo working on the Diamond, or would it even be worth having? Looking forward to your surprise, I hope it's a rom! Thanks for your hard work.
Ok,
the software works for sure because it changes some registry keys under :
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\GSensor
It changes the "calibrateX-Y" keys that were all set at 0 before. I've spot it writes a very strange value for key Calibrate3-2, and I guess that's why the Gsensor driver does set them back to default values. I am trying to understand how it works right now.
EDIT: Noway!! The data in regsitry are always set to default on reset, the strange value could be a negative number in an unsigned rappresentation. The good news is that the calibration work 'til reset.
P.S.: Some of the masters could please be so gentle to advice me on what disassembler to use for ppc software ? I searched this forum but I got confused. Thanks a lot.
Calibration works but Diamond driver doesn't consider calibration data, so there is no way to calibrate Diamond G-sensor using original driver. We need Raphael driver since it will use calibration data stored in registry. I have tried to port this driver to Diamond since it has exactly the same accelerometer hardware, but it doesn't work... It may be because Diamond doesn't have keyboard (G-Sensor should be automatically stopped on Touch Pro when keyboard is out or when device is in low power mode).
uniqueboy said:
Hi schaps, since you are looking at the g sensor and the Raphael, is there any chance do you think of it being possible to get VueFlo working on the Diamond, or would it even be worth having? Looking forward to your surprise, I hope it's a rom! Thanks for your hard work.
Click to expand...
Click to collapse
VueFLO is part of my surprise
It works on few apps at the moment but I plan to support most of apps in the future (including IE and Opera of course).
YOU WILL NOT REGRET IT!!!
http://forum.xda-developers.com/showthread.php?t=469865
I dont feel any difference...srry
DID you soft rest you device??
also what were the setting before applying the tweak??
azharsunny said:
DID you soft rest you device??
also what were the setting before applying the tweak??
Click to expand...
Click to collapse
Azhar, maybe he is already using a rom, that already have the settings ?
PressureThreshold = 240
FingerPressure 18
That were my old settings (i think those numbers above are standard HTC values?)
and YES did soft-reset!
@ Danny, no i just run HTC roms...
But i use 2 apps --> Diamond Config Tool and his performence tweaks, and i use Diamond Tweak and his performence tweaks
Sleehond said:
PressureThreshold = 240
FingerPressure 18
That were my old settings (i think those numbers above are standard HTC values?)
and YES did soft-reset!
@ Danny, no i just run HTC roms...
But i use 2 apps --> Diamond Config Tool and his performence tweaks, and i use Diamond Tweak and his performence tweaks
Click to expand...
Click to collapse
Ahh alright, but it could been. That these tweaks, already are known .. Maybe diamond tweak have it, but i don't know ..
I dont think its work... return to my old setting, sorry
I just checked it, diamond config tool doesnt have the same tweaks.
And i just changed the values in total commander, and the new values were not there, i changed it myself.....
But my touch response is great, same as before, so i dont mind
maybe those 2 app did the tric for you but for me the tweaks made the phone a hell of lot more sensitive to my touch!! i mean now all i do is place my finger on the screen and the thing is sellected and in TF3D scrolling hase become a lot easire!!
There is an old thread about this:
http://forum.xda-developers.com/showthread.php?p=2760549
Best touch response for GSM Diamonds starts in Post #6
Sergio PC said:
There is an old thread about this:
http://forum.xda-developers.com/showthread.php?p=2760549
Best touch response for GSM Diamonds starts in Post #6
Click to expand...
Click to collapse
i have been using that setting on all my roms since that post sergio, works great i think!
Sergio PC said:
There is an old thread about this:
http://forum.xda-developers.com/showthread.php?p=2760549
Best touch response for GSM Diamonds starts in Post #6
Click to expand...
Click to collapse
b4 these settings i was also using the settings u mentioned!!! to be honest , these settings work much better!!! try it!!
Hi everyone...
I've been playing around with OpenGL ES, struggling to get it to compile, and eventually succeeding to discover that some of the parameters I set wouldn't work on the Diamond.
I've fixed all of the issues that I know of and now I want to see what devices a little test application will work on.
Hopefully, it should work on all the MSM720X based devices, and anything else that supports OpenGL|ES, that support can either be hardware or software acceleration, so those of you without the more recent devices can give it a shot and see what happens.
You should be presented with a triangle, that you can reorientate with mouse click and drags...
If people could test it out and see what happens, I'd be very happy
It may even lead somewhere!
Tested and verified on:
HTC Touch Diamond
HTC Touch Diamond2
Xperia X1 (sortof...)
HTC Touch HD
HTC Touch Pro
it works perfectly on my HD !
hanackin said:
it works perfectly on my HD !
Click to expand...
Click to collapse
Excellent.
Are the framerates good? (I know there's no display of framerates, but does it feel smooth?)
XDA Diamond Pro
I've tested it on my german O2 XDA Diamond Pro and it works very well and feels very smooth - even with chainfires gfxboost being disabled...
l3v5y said:
Excellent.
Are the framerates good? (I know there's no display of framerates, but does it feel smooth?)
Click to expand...
Click to collapse
it looks really awesome dude ! it is really fast and the display is smooth
Fast and smooth for me
Did you do it in C++ or Managed Code?
MarcLandis said:
Fast and smooth for me
Did you do it in C++ or Managed Code?
Click to expand...
Click to collapse
C++. Which is why I had trouble setting it up. Koush's managed API is easier to set up, but slower to run...
Attached is a new version that utilises a wrapper for some OpenGL ES functions, and l3v5yExtendedFunctions for some window creation etc...
It should have comparable frame rates, memory usage etc.
It also utilises the accelerometer of HTC devices, tap the center button (or anything that sends VK_RETURN) do toggle it.
You need to copy both dlls and the exe to your device, then run the exe.
Fast and smooth on my diamond here
and the new version is flickering a bit by fast moves
I don't know, if this has supposed to work on Iolite (different chipset), so i tried it . App even didn't start. It shows usual error with "either it is not signed..."
torrentonly said:
I don't know, if this has supposed to work on Iolite (different chipset), so i tried it . App even didn't start. It shows usual error with "either it is not signed..."
Click to expand...
Click to collapse
That probably means your device doesn't have a libGLES_cm.dll file. Which means that by default there's no OpenGL ES support.
Something that may be of interest to people here...
This is a game built off the framework created earlier... Should work on the same devices
Tested all apps on HTC Jade and all run smoothly..
Tested on x1 Test1 in post1 works but freezes for a second here and there.
test2 run but displays hello! and then closes.
and in the coin thread i reported it worked flawlessly on my x1
shadowmike said:
Tested on x1 Test1 in post1 works but freezes for a second here and there.
test2 run but displays hello! and then closes.
and in the coin thread i reported it worked flawlessly on my x1
Click to expand...
Click to collapse
Kinda odd...
But since the coin works, it may be because of the version of the dlls... No idea why... I'll have a look though!
works ok with topaz
shamus said:
works ok with topaz
Click to expand...
Click to collapse
Awesome...
I'll add that to the first post.
ok, just gave it a go. You can edit Your first post - works on xperia. perfect.
umm... sorry. test 2 doesn't work. as above - just brief hello and exits.
Absolutely amazing work!
This is great. I tried the two tests and your coin app on a htc td - they were all perfectly smooth...
Do you think it's possible to add support for 3ds max model files? That would be completely fantastic!
Thank you for your work, I really appreciate it. Now I can show my iPhone friends that my device isn't just a lagging piece of crap..
bronx said:
ok, just gave it a go. You can edit Your first post - works on xperia. perfect.
umm... sorry. test 2 doesn't work. as above - just brief hello and exits.
Click to expand...
Click to collapse
It'll be because of the lack of accelerometer... My code didn't contain that much error checking... :S