Searching for software, showing power drain on WM5/WM6 - MDA III, XDA III, PDA2k, 9090 ROM Development

Hello everyone!
I'm searching for a program, which can show power drain (in mA) on BlueAngel under WM5/WM6. Tried a lot, but no luck, always getting 0 mA. Any suggestion?

XShell said:
Hello everyone!
I'm searching for a program, which can show power drain (in mA) on BlueAngel under WM5/WM6. Tried a lot, but no luck, always getting 0 mA. Any suggestion?
Click to expand...
Click to collapse
Hardware BA is not support!
hiii

Do you mean "There is no way to get whis information, couse of not supported by BA hardware"?

XShell said:
Hello everyone!
I'm searching for a program, which can show power drain (in mA) on BlueAngel under WM5/WM6. Tried a lot, but no luck, always getting 0 mA. Any suggestion?
Click to expand...
Click to collapse
i know it's made for another device but try BatteryStatus plugin for the today screen , use the forum searcdh as it's posted under another device but it works for that just fine on my Hermes and my Ameo , havent' tried it yet on my BA
good hunting!

Related

Lock 0 minutes

Hello
I very happy whith my S200 new!
i was install many apps and works fine!
The only problem i have, i use 0 minutes to lock the pda
Supose to stay on, and when turn off , ask for the password
The problem, is any time, without turn off , ask for the password after any minutes
Anybody know to resolve?
Thanks in advance!
Regards from spain!
Nicolas
Have the same experience on TyTN
I also have this on my Orange SPV M600, its not really a problem while running from batteries, but when running TomTom and its attached to the car charger it still seems to kick in. Like you i assume that if you set it to a time of 0 then it should only kick in when the phone powers down. I have resorted to turning off the lock but i would prefer to have it enabled.
Sorry, have only had my M600 for a week and am just finding my way with a smartphone/ppc, should have had a proper look through the rest of the forum before posting. The answer has already been given by lyallb under the following thread http://forum.xda-developers.com/viewtopic.php?t=57561
PERFECT! ITS WORKS!
THANKS A LOT!
NOW S200 IS NEAR TO BE A PEFECT PDA(FOR MEEEEEEEEEEEEE)
BYEEEEEEEEE
Regars from barcelona
Nicus

Deep Sleep!!

Hi all ,
As you guys are aware of the last POst on
http://forum.xda-developers.com/showthread.php?t=315745
Now am facing a new issue ...
Even yesterday my phone was charged with more than 90% of Batt..
the phone did showed the GREEN SIGNAL LED but with the screen off..(power saving mode enabled to save batt)
but when i pressed the power button the PROPHET refused to wake up-
I had to reset,but than the same problem as earlier i had posted in thread..
The prophet dint power on at all!!!after removing batt and installing after some 10Min no solution...
Finally as earlier the prophet wokeup all by itself...
But to my surprise the batt was around only 80%
Also one weared thing is that the brightness will go to zero as i connect to USB or charger!!
My question :
Why this happens (have just hard reset my phone a couple of days back)
Why the batt drained by around 12% that too in a matter of just 20minutes when the prophet was not ON at all...
Note:have installed the BatteryStatus-Plugin the CPU is not overclocked by me its at 195Mhz...
sorry to start a new thread as i thought this can help others also..
Thanks
Chirag
GUYS GUYS WHRE ARE U ALL
PLS REPLY !!!
crest_delta said:
GUYS GUYS WHRE ARE U ALL
PLS REPLY !!!
Click to expand...
Click to collapse
what ROM are you using? GSM Radio ROM? etc etc...please post that info
hofo_mofo said:
what ROM are you using? GSM Radio ROM? etc etc...please post that info
Click to expand...
Click to collapse
Yes ,sure
Its the DOPOD
ROM 2.15.13.27WWE
ROM Dt.3/9/06
RADIO VERSION:02.19.21
PROTOCOL:4.1.13.09
ExtROM :2.15.13.121
Its a G4 Model O2 NEO
Thanks

Bateery Problem

Hi all,
Recently my universal (T-Mobile MDA Pro) get off when the battery is 40%. I tried to hard rest, but still it has the same problem. So i bought third party battery to replace the old one, and the probelm is still there.. it is off when the battery reach 40%...
Waht is the problem? anyone can help me?
Thanks
hsrimo said:
Hi all,
Recently my universal (T-Mobile MDA Pro) get off when the battery is 40%. I tried to hard rest, but still it has the same problem. So i bought third party battery to replace the old one, and the probelm is still there.. it is off when the battery reach 40%...
Waht is the problem? anyone can help me?
Thanks
Click to expand...
Click to collapse
buy NORMAL BATTERY NOT FROM CRAP LIKE FIRMS..BUY FROM Oficial DISTRIBUTORS .its battery problem not unis
but maybe one small chance near 10% that its hardware problem ... with VRM ( voltage regulation module ) ( in easy eng .. charge controler )
hsrimo said:
Hi all,
Recently my universal (T-Mobile MDA Pro) get off when the battery is 40%. I tried to hard rest, but still it has the same problem. So i bought third party battery to replace the old one, and the probelm is still there.. it is off when the battery reach 40%...
Waht is the problem? anyone can help me?
Thanks
Click to expand...
Click to collapse
same problem here.. 40% and gsm crash... reboot.. don know what to do...

Universal Crashes A LOT ! Help :S

hello Everybody
returning Universal user, just bought one used from a store, then a just whent on trying a lot of different Wm6 roms but they all had the same problem on my Uni, they ALL crashed by either freezing or just "turn off itself".
then after some time using the rom it crashes hard that it cant be turned on then it crashes at the boot screen.
i would like to get the original Wm5 rom back but where to go for finding it?
Regards
Prosasan
There are more mobile providers which sold Uni, so there are more factory WM5 versions. Personally I'd recommend the TMobile one. I'm sorry, but at the moment im using my notebook, and i dont have the ROM here, but i'll upload it somewhere ASAP
THX !
That would be absolutely GREAT !
i've been "forced" to use my Kaizer instead of my uni these last couple of days
but mine is from denmark, which was branded by Sonofon, but i would rather have some kind of "clean" unbranded version, by the way are there any difference between a branded and one that isn't ?
Found a Version of wm5 that is clean
so i think that i wont need the one from t-mobile, but we will se how it evolves
anyways how to support 4gb in wm5 ?
Prosasan said:
hello Everybody
returning Universal user, just bought one used from a store, then a just whent on trying a lot of different Wm6 roms but they all had the same problem on my Uni, they ALL crashed by either freezing or just "turn off itself".
then after some time using the rom it crashes hard that it cant be turned on then it crashes at the boot screen.
i would like to get the original Wm5 rom back but where to go for finding it?
Regards
Prosasan
Click to expand...
Click to collapse
Welcome to the forum
I don´t think that the problem is caised by a 6 or 6.1 ROM, however try a wm5 and if not corrects try to read the Wiki
And don´t forget to vote!!
Good luck,
orb3000
thx for the welcome, the wm5 rom didn't help it still just shuts down randomly.
wth is wrong with my device argh, i've tried the universal wiki but didn't find anything about my problem.
i've already voted for the Universal
Prosasan said:
thx for the welcome, the wm5 rom didn't help it still just shuts down randomly.
wth is wrong with my device argh, i've tried the universal wiki but didn't find anything about my problem.
i've already voted for the Universal
Click to expand...
Click to collapse
Could be a battery problem issue, test connected to wall charger and see if behaives the same, also remove your sd card and sim to test
Doing this we can try to identify the problem
Good luck,
orb3000 said:
Could be a battery problem issue, test connected to wall charger and see if behaives the same, also remove your sd card and sim to test
Doing this we can try to identify the problem
Good luck,
Click to expand...
Click to collapse
thx for that i have two batteries one that is brand new that make it crash the other one is the original that wont charge more than 50%, but the problem isn't there when it is connectet with my cradle or my charger
the problem isn't there while using the old batteri...
Prosasan said:
thx for that i have two batteries one that is brand new that make it crash the other one is the original that wont charge more than 50%, but the problem isn't there when it is connectet with my cradle or my charger
the problem isn't there while using the old batteri...
Click to expand...
Click to collapse
So that´s it!
There are some problems with your new battery, perhaps not the original
Here on Universal forum there is a member called duke nukem, he claims he sells the original ones, try to buy another battery
Good luck,
And all Uni members!
let´s vote!!!
i see
but the new batteri is Original ? from qtek/Htc

[Q] Cotulla WM 6.1 ROM Backup battery problem

Hi,
Recently I have upgraded to cotulla's wm6.1 ROM. I have a JAM with 128 mb RAM. On my battery panel, I can see my Main (Li-ion) and Backup (NiMH) batteries. When I had WM2003, I can work until my main battery meter become completely 0 and the device will work on backup battery. But now, I am getting red warning light when my main battery meter become low, and the device turns off even if the backup battery is showing 100%. Does anybody know the reason for this?? Is anything wrong with the registry?? Pls reply to solve me the problem..
Thanks in advance...
blasteralfred
blasteralfred said:
Hi,
Recently I have upgraded to cotulla's wm6.1 ROM. I have a JAM with 128 mb RAM. On my battery panel, I can see my Main (Li-ion) and Backup (NiMH) batteries. When I had WM2003, I can work until my main battery meter become completely 0 and the device will work on backup battery. But now, I am getting red warning light when my main battery meter become low, and the device turns off even if the backup battery is showing 100%. Does anybody know the reason for this?? Is anything wrong with the registry?? Pls reply to solve me the problem..
Thanks in advance...
blasteralfred
Click to expand...
Click to collapse
this, you just try to use nueBatteryTP2GSM to overcome
Hakim Rahman said:
this, you just try to use nueBatteryTP2GSM to overcome
Click to expand...
Click to collapse
It is wrong when copying in Windows
It shows 0% battery
Not working..... resulted a ROM crash... and made me to Hard reset..
Even I downloaded and installed original nueBatteryTP2GSM cab file latest version.. but no use..

Categories

Resources