Hello
I very happy whith my S200 new!
i was install many apps and works fine!
The only problem i have, i use 0 minutes to lock the pda
Supose to stay on, and when turn off , ask for the password
The problem, is any time, without turn off , ask for the password after any minutes
Anybody know to resolve?
Thanks in advance!
Regards from spain!
Nicolas
Have the same experience on TyTN
I also have this on my Orange SPV M600, its not really a problem while running from batteries, but when running TomTom and its attached to the car charger it still seems to kick in. Like you i assume that if you set it to a time of 0 then it should only kick in when the phone powers down. I have resorted to turning off the lock but i would prefer to have it enabled.
Sorry, have only had my M600 for a week and am just finding my way with a smartphone/ppc, should have had a proper look through the rest of the forum before posting. The answer has already been given by lyallb under the following thread http://forum.xda-developers.com/viewtopic.php?t=57561
PERFECT! ITS WORKS!
THANKS A LOT!
NOW S200 IS NEAR TO BE A PEFECT PDA(FOR MEEEEEEEEEEEEE)
BYEEEEEEEEE
Regars from barcelona
Nicus
Related
I just can't beleive guys that you are experts and that's definitly correct. I learnt a lot from you guys but i have a problem and no one responded... My qtek 9100, acctually it's o2 xda is turning itself off and i tried to update it at least 5 times on different types of roms... It doesn't help. Can you please tell me what is making this problem. Now it's o2 ver 2.21 installed... Please help me and again, you are the best and thank you
bigbatica said:
I just can't beleive guys that you are experts and that's definitly correct. I learnt a lot from you guys but i have a problem and no one responded... My qtek 9100, acctually it's o2 xda is turning itself off and i tried to update it at least 5 times on different types of roms... It doesn't help. Can you please tell me what is making this problem. Now it's o2 ver 2.21 installed... Please help me and again, you are the best and thank you
Click to expand...
Click to collapse
if you keep it connected to the battery does it keep turning itself off? Also, are the gold connectors that touch the battery bent or dinged at all?
Bad battery?
Had same problem with Toshiba e800...
fresh123breeze said:
Bad battery?
Had same problem with Toshiba e800...
Click to expand...
Click to collapse
well its obviously something to do with the battery...but definitely trying a new battery can't hurt.
Can't be. It's new device... With some roms installed it used to happen that when someone call me it turns off. It used to happen after third call received. I though that the problem is with sim card voltage but it's not. When i installed gsm radio rom 1.13 that problem stopped. Then it used to turn itself off after i leave it for let's say half our. That means, no one calls me and nobody touched it and it turned off... I don't no, i'm ging crazy... I read that some of these problems can happen with software installed. Can you tell me, wich version of software is installed on original qtek 9100??? Thanx for reply
Then it used to turn itself off after i leave it for let's say half our. That means, no one calls me and nobody touched it and it turned off... I don't no, i'm ging crazy...
Click to expand...
Click to collapse
I can't believe it either. :? So you want your qtek 9100 always on for 24/7?
Yes, i need it 24/7. For me it's not logical tah they made device like that and that it can't work 24/7
how long ago did you buy the phone...can you just exchange it for another one? Sounds like its broken to me...
by turning itself off I assume you mean all the way off, Ie when you hit the power button you see the same series of bootscreens you see after a soft reset, NOT just a standby (ie hit power and the desktop comes on...) I certainly do not mean to insult your intellegenct, but I feel it helps to be extremely clear on the details with problems like this...
Yea I have to agree with Starcruiser1229. It does seem like you mean when the device is idle, it will automatically go off. does it bother you that much when it goes off all the time? is this also your first time using a pda? sorry for the weird questions but it really does look like its the first time you've actually used one. if the device goes off and you have to soft reset all the time, then that is a problem.
Ok, thanx for reply. I'm not stupid, i hope so . I know what is stand by and that screen turns off when idle and other stuff. It's not my first pda and i know how to use it and what am i talking about. Yes it soft reset itself after fourth call received (sometimes on the first call,too). I read somewhere on the net that this problem is connected with software. Sometimes it turns off on standby and green is not blinking. When i hit on/off button to turn on screen, as i always do when it's locked, it soft reset... Don't know what more are you interested and i know it sounds silly because i haven't seen anyone had this problem on this forum. My friend read on some other forum that the problem is with unlock tools. Could this be possible???
Hi there y'all,
my xda neo / Prophet is always blinking green while he has got an telephone-connection with my provider and i hate that blinkin light, especially in my bedroom.
Has anyone got an idea how to disable this? Is there any possibility via Registry?
Thanks for any help!
a piece of black tape perhaps?
Try
HKLM\Drivers\BuiltIn\AllLEDMgr\Index
change the value to 0
__________________
I used LED Toggle which I attached. It works fine.
You do have to watch out though: disconnect your phone from power or your computer before you activate it. Using it once stops the light and using it again turns it back on.
It looks like the effect is gone after a softreset.
And another thing: some hours after using it my phone didn't respond at all for a few minutes. The only solution was a soft reset. This has happened several times now and when I keep the light on it seems to be working normal again. I don't know if it's just my Prophet but if you encounter the same problem we know where it's coming from.
Jayxz said:
I don't know if it's just my Prophet but if you encounter the same problem we know where it's coming from.
Click to expand...
Click to collapse
Thanks Jay, your little program works perfect. I'll see if i'll get the same problem and report it here
niketkumar, thanks for your help. I first try Jays Software, if i get the same problems i'll use your registry hack.
Thanks to both of you from my girlfriend, too - cause now it's less greener in our bedroom
So? Any news?
I stopped using the software and my phone hasn't crashed once. How's yours behaving?
Had the exact same problem, when using LED Toggle my device occasionally hangs. Since I stopped using it everything works just fine..
Man, that just sucks. I was so happy to be rid of that stupid light.
Now about that registry hack. I can find everything up to "\builtin" but the rest (AllLEDMgr\Index) doesn't exist. Do I have to create a new folder with an index file which has the value set to 0 or what?
Don't remember if I've tried the registry hack mentioned above, but I followed the thread about this issue in Modaco and tried numerous registry hacks before ending up with the only solution (that I'm aware of) that currently seems to work.
Which, unfortunately is the LED Toggle attached above, which in hand makes your device quite unstable..
So, back to the drawing board guys - hope someone finds a solution!
Just checked the corresponding thread on Modaco (http://www.modaco.com/index.php?showtopic=243948&st=0) and indeed this solution is not working flawlessly on our beloved Prophets..
Why not just place it face down on your dresser at night?
this has to be one of the dumbest hack request on the site!!! do as blunt man said and put it face down if it's that annoying!
gibster said:
this has to be one of the dumbest hack request on the site!!!
Click to expand...
Click to collapse
maybe you just don't understand it
gibster said:
this has to be one of the dumbest hack request on the site!!!
Click to expand...
Click to collapse
this has to be one of the dumbest comments i ever got in an professionals-board.
Jayxz, any of the workarounds i found generated problems so i just painted the light black. Not really the best solution but it sucked so badly
I find the green light annoying too, but i'd still like to have the orange warning when i received a msg or missed a call....
I hope that somebody could find a working solution for this
You can try the attached File i found at the MoDaCo Forum.
It works on my Prophet but some Users told that it drains the Battery
cu seneca
seneca said:
You can try the attached File i found at the MoDaCo Forum.
It works on my Prophet but some Users told that it drains the Battery
cu seneca
Click to expand...
Click to collapse
i tried this one but a taskmanager shows that ~10% cpu-usage is caused by this tool
enabling led blinking
Hi to All,
my HTC TYTN II always blinking green while he has got on phone-connection with my provider, and i love that. But now i have xperia and...no blinking on phone connection. It is possible to made it blinking when phone connection with provider is on
Hello all, long time reader - first time poster. I have an SPV M3100. It's brilliant, but I have two issues. I've searched extensively, but can't locate info about them, so I have put them here for some nice person to help me with . I have split them across two threads, for ease of searching.
Issue: Auto-lock timeout
I used to have an SPV M2000, whereby I had the lock timeout set to 0 minutes. The password screen would then only come up only when I turned the phone on out of standby. However, with the SPV M3100, I set the time-out to 0 minutes and it locks itself after being idle for 1 minute. Is it possible to make the SPV M3100 only show the password screen when I (or a radio event) bring it out of standby? Thanks for your help in advance.
i would like to know the answer to this question as well.
Do other people's tytns behave in the same manner? I'm trying to gauge whether it's a software issue or a network specific cab thing..
Hi.
Sorry to bring back this thread, but anyone having a solution ?
Got same problem with my m3100, first with original WM5 ROM, then I noticed it with WM6 LVSW 20070326 and now with VM6 Black v2.0.
Don't know if it's a hardware problem or a recuring bug in WM5/WM6.
Thanks.
Greetings.
(done a lot of searching, but didn't found anything)
Hi there.
First I must apologize for my bad english.
But this isn't my only problem. Beside new Samsung i600 I have my very-old-but-still-good MDA Compact, also known as HTC Magician. I'm using it as GPS navigation with external Bluetooth GPS reciever and everything was fine until I've tried install new iGo 8, so called NavN'Go software. Installation ended without problems and app was working. For a while. After something about 5 sec of navigation my Magician turned off. Not restart, totally off. OK, I've tried to turn it on. Everything what I'm getting is bootloader and - sometimes - 1sec of homescreen. After that, Magician fall to sleep.
Of course I've tried reflashing ROM, without success. Same problem with same 1sec of "Welcome in Windows Mobile 2003 SE" or what is first screen after reflashing.
I'm asking for help or advice, never happend to my Magician before. So I've search in this forum but nothing equal to my problem.
And little switch under battery cover isn't solution, soldering machine more than 2 years ago has done this HTC joke for me.
Lot of thanks for any ideas, I never leave my Magician, we are in love forever but working one is better than dead one, isn't?
Hello,
I tried to search if someone has the same problem, I didn't found.
I bought my X7500 on Ebay, it was unlocked.
I tried a few SPL3.5 Roms (Michy, Ap4, Avenger...) and I still have the same issue. When I use the phone (bluetooth off, wifi off...) in normal conditions (moving or not) it hangs up after a few minutes, and it searches the network for 2-3 seconds (radio 1.58)
Exactly like if I was in a place where the signal was very bad...
I really hope someone knows this issue... And can help me.
Thank you very much (sorry for my poor english...)
same here
same problem here,i unlock it successfully, ubgrade to ap4, every thing is ok till 2 weeks, suddenly....hanging and touch screen not working after a few minutes, hard and soft rest not useful and downgrade to.....