Hello all, long time reader - first time poster. I have an SPV M3100. It's brilliant, but I have two issues. I've searched extensively, but can't locate info about them, so I have put them here for some nice person to help me with . I have split them across two threads, for ease of searching.
Issue: Auto-lock timeout
I used to have an SPV M2000, whereby I had the lock timeout set to 0 minutes. The password screen would then only come up only when I turned the phone on out of standby. However, with the SPV M3100, I set the time-out to 0 minutes and it locks itself after being idle for 1 minute. Is it possible to make the SPV M3100 only show the password screen when I (or a radio event) bring it out of standby? Thanks for your help in advance.
i would like to know the answer to this question as well.
Do other people's tytns behave in the same manner? I'm trying to gauge whether it's a software issue or a network specific cab thing..
Hi.
Sorry to bring back this thread, but anyone having a solution ?
Got same problem with my m3100, first with original WM5 ROM, then I noticed it with WM6 LVSW 20070326 and now with VM6 Black v2.0.
Don't know if it's a hardware problem or a recuring bug in WM5/WM6.
Thanks.
Greetings.
(done a lot of searching, but didn't found anything)
Related
Hello
I very happy whith my S200 new!
i was install many apps and works fine!
The only problem i have, i use 0 minutes to lock the pda
Supose to stay on, and when turn off , ask for the password
The problem, is any time, without turn off , ask for the password after any minutes
Anybody know to resolve?
Thanks in advance!
Regards from spain!
Nicolas
Have the same experience on TyTN
I also have this on my Orange SPV M600, its not really a problem while running from batteries, but when running TomTom and its attached to the car charger it still seems to kick in. Like you i assume that if you set it to a time of 0 then it should only kick in when the phone powers down. I have resorted to turning off the lock but i would prefer to have it enabled.
Sorry, have only had my M600 for a week and am just finding my way with a smartphone/ppc, should have had a proper look through the rest of the forum before posting. The answer has already been given by lyallb under the following thread http://forum.xda-developers.com/viewtopic.php?t=57561
PERFECT! ITS WORKS!
THANKS A LOT!
NOW S200 IS NEAR TO BE A PEFECT PDA(FOR MEEEEEEEEEEEEE)
BYEEEEEEEEE
Regars from barcelona
Nicus
Hi...
I did a quick search on this but couldn't find an existing topic on it - apologies if its alrady been coverd...
I'm having the occasionl problem where my M3100 flags up a warning and tells me the battery is low even though its fully charged (I think its also powered itself down a few times because of this too...).
A soft reset doesn't seem to fix it but switching the device off and on again does.
Anyone else experienced this and more importantly has anyone got any suggestions on how to prevent / fix it?
TIA
Minestorm
Had my UK Orange SPV M3100 since last Monday and it's been working fine re battery.
In fact, i've been surprised how good the battery life has been so far!
See tag for my ROM details...
Hi y'all,
since a few days I'm the owner of a Qtek S100. The previous owner bought it a year and a half ago and has never updated anything on it.
The ROM is version1.06. (Radio is version 1.05). I've tried to register on qtek.nl to get the latest updates but you have to enter an IMEI-nr during the registration and since my device is from Belgium as is my IMEI, I can't register!
I see that there are different kinds of ROMs circulating so my question is; Which one do I need/ is the best?
Should I install rom and radio apart or does rom contain also radio?
I've heared about a special rom-pack that also has the big storage hack in it. What about this?
Do I also have to install the camera patch? Where can I find it?
I've also heared about a A2DP bluetooth patch..
The sticky about upgrading is kinda outdated and didn't help me much..
---------------------------------------------------------------------------------------
Aside from this I have some other problems I've encountered. I don't know if they'll be fixed after I update the ROM but here they are;
- how do I lock the buttons/screen? The only thing that seems to work but isn't very convenient is to enable a the password in the settings and check the box next to "prompt if device is unused 1 minute". No plain button/screen lock?
- If the device is on stand-by I don't get any notification that I've received an sms. Only when I disable the stand-by by pushing the power button then I get it. But this could be like half an hour after I've received a message.
- if someone calls me and I end the call, how can I save his/her number to my phonebook?
- If I take of the batterycover the device shuts down. Is this supposed to happen?
-How do you completely shut the device down? If I press and hold the powerbutton (like described in the manual) the backlight dims, if I press it shortly it goes on stand-by.. but how do I turn the device of (without taking of the battery-cover..)
- Is it normal that when my battery is low (10-15%) the bluetooth doesn't work?
- Which 4GB SD-cards are known to work 100% with the Qtek S100?
- I've noticed that the battery is kinda weak/worn out? Where can I find a replacement with a higher capacity?
Maybe I should also say that this is the first time I work with Windows Mobile so don't be too harsh on me
Thanks for helping out!
Anyone?
debilio said:
Hi y'all,
I see that there are different kinds of ROMs circulating so my question is; Which one do I need/ is the best?
Should I install rom and radio apart or does rom contain also radio?
Do I also have to install the camera patch? Where can I find it?
I've also heared about a A2DP bluetooth patch..
- how do I lock the buttons/screen? The only thing that seems to work but isn't very convenient is to enable a the password in the settings and check the box next to "prompt if device is unused 1 minute". No plain button/screen lock?
- If the device is on stand-by I don't get any notification that I've received an sms. Only when I disable the stand-by by pushing the power button then I get it. But this could be like half an hour after I've received a message.
- if someone calls me and I end the call, how can I save his/her number to my phonebook?
-How do you completely shut the device down? If I press and hold the powerbutton (like described in the manual) the backlight dims, if I press it shortly it goes on stand-by.. but how do I turn the device of (without taking of the battery-cover..)
- Is it normal that when my battery is low (10-15%) the bluetooth doesn't work?
- Which 4GB SD-cards are known to work 100% with the Qtek S100?
Click to expand...
Click to collapse
Okay, I'll make a start with what I know off the top of my head but would recommend a bit of reading here and on MoDaCo.com as all the answers not too difficult to find.
I'm using iMate 1.12 ROM which is the best from that source. I've not tried any other operator/manufacturer versions so can't comment. The radio version will be included and the camera patch is not needed with the latest updates. A2DP patch is here :
http://forum.xda-developers.com/showthread.php?t=249219
I recommend pocketMax's screenGuard and phoneAlarm for locking & notifications respectively :
http://www.pocketmax.net/index.html
With the Dialpad on the screen, go to Call History. Press and hold on the number you want to save, first option is Save To Contacts.
Pocket PCs until very recently were designed to never be completely shut down. This is why we have a backup battery. Make sure that you pull the little rubber lug away from the battery before you remove it as you can initiate a hard reset otherwise. This is in the manual.
Bluetooth can be a battery-drainer so I'm not surprised it won't work with that level of juice. I'd try and avoid letting the battery level get that low if possible as the backup only lasts for about 20 minutes. After that you will lose all your data etc.
I use a MobyMemory own-brand 4GB mini-SD in an adaptor. I have had a couple of problems with it but generally it works fine. Today screen plugins installed on the card can be slow to load.
http://www.mobymemory.com/
I'm sure other members here will correct me if there are better answers and fill in the gaps otherwise.
please do search and few readings on this forum... and hmmm i saw some anwers that actually u can get from your xda manual book
happy reading...
Hi Folks,
i have i-mate jasjam / htc tytn.
i had on the past local vendor ROM, and i replaced it to Schaps 4.22
since the device started to freeze (in this time the screen turned on but no light and you can see the clock couple of hours / time back)
i upgraded to schaps 4.31, but the problem didn't solved...
the stuck happen at least every day.
HELP!!!!!
Regards,
N
Try with htc official wm6
do you know where i can find it?
???
try the wiki....
can you send a link.
Thankscan you send a link.
Hi there.
First I must apologize for my bad english.
But this isn't my only problem. Beside new Samsung i600 I have my very-old-but-still-good MDA Compact, also known as HTC Magician. I'm using it as GPS navigation with external Bluetooth GPS reciever and everything was fine until I've tried install new iGo 8, so called NavN'Go software. Installation ended without problems and app was working. For a while. After something about 5 sec of navigation my Magician turned off. Not restart, totally off. OK, I've tried to turn it on. Everything what I'm getting is bootloader and - sometimes - 1sec of homescreen. After that, Magician fall to sleep.
Of course I've tried reflashing ROM, without success. Same problem with same 1sec of "Welcome in Windows Mobile 2003 SE" or what is first screen after reflashing.
I'm asking for help or advice, never happend to my Magician before. So I've search in this forum but nothing equal to my problem.
And little switch under battery cover isn't solution, soldering machine more than 2 years ago has done this HTC joke for me.
Lot of thanks for any ideas, I never leave my Magician, we are in love forever but working one is better than dead one, isn't?