SCLPF Cube - P3600 General

hey there. i have another question unfortunately . ive installed FtouchFlo 1.4.1 and then i installed SCLPF 1-62. of course i also installed adobe flash lite player v.2.1.7.2.14.99 before all that. i got everything to work, the only question i still have is how i can assign a few things like comm manager to the icon in sclpf. i did everything according to instructions where it was mentioned that you have to simply copy the program u wanted into Windows ==> Start Menu ==> Programs and then you are able to choose it in the cube settings. but with things like the comm manager it didnt work and also, can u actually assign a folder to an icon?

Penzi said:
hey there. i have another question unfortunately . ive installed FtouchFlo 1.4.1 and then i installed SCLPF 1-62. of course i also installed adobe flash lite player v.2.1.7.2.14.99 before all that. i got everything to work, the only question i still have is how i can assign a few things like comm manager to the icon in sclpf. i did everything according to instructions where it was mentioned that you have to simply copy the program u wanted into Windows ==> Start Menu ==> Programs and then you are able to choose it in the cube settings. but with things like the comm manager it didnt work and also, can u actually assign a folder to an icon?
Click to expand...
Click to collapse
same problem overhere... can not assign comm manager because it s not in the list of programmes which can be choosen...

Related

Pocketplus theme change?

I have installed Pocketplus 3 on my Wizard and it work great after disabling the saft boot "feature".
I tried to change to some of the theme preinstalled with pocketplus 3 to change the indicator icon without any effect.
Anyone has any luck using anything other then the default theme?
spectra128 said:
I have installed Pocketplus 3 on my Wizard and it work great after disabling the saft boot "feature".
I tried to change to some of the theme preinstalled with pocketplus 3 to change the indicator icon without any effect.
Anyone has any luck using anything other then the default theme?
Click to expand...
Click to collapse
I have the same problem.. only workes if u send the .tsk file to eg my documents and installs it from there.. so far.....
On my Vario, the themes show up in the Today options, but selecting them does not load them. The theme is still Windows default, or one of the other ones that came with the phone. Too bad, wold have liked to use the same theme I was used ot on my magician. How des installing them from another folder ( like my documents) work? just copy them there? But how to select them then?
I have finally find a work around solution from another forum.
http://www.aximsite.com/boards/showthread.php?t=106316
Here is the extract:
those who are having problems installing themes. sbsh had a workaround. goto settings/today and highlight the theme you wish to use. locate the tsk file and copy to root. rename tsk to cab. install the file. goto settings/today/items exit. it seems to work without problems.
I just tried this method and works. Hope this help with anyone that is using PocketPlus.

HTC Touch Cube-- Easy One-Touch Install Version

20071130 HTC_CUBE_1.0_BY_LEO2016
Fixed Cube Settings "App Launcher tab" can't show any images
Fixed Add FTouchFloConfig_v0.9
Fixed Update to TFloCubeCtrl - v1.1.0
Fixed Add FTouchFloConfig Shortcut to Start Menu
Fixed Duplicate Start FtouchFlo Programs After softrest
Fixed Enable or Disable HTC_CUBE by useing FTouchFloConfig
Readme
1. Copy file to your ppc then install to main memory
2. Start --> Programs --> FTouchFloConfig
3. Selet General tab --> Checked Enable FTouchFLO
4. Done then exit this Programs
5. Softrest Your PPC
Enjoy~~~~~~~
Device Compatibility
MIO........A700.......WM5.........Work QuickDial.exe Dead
Asus.......535.........WM6.........Work QuickDial.exe Dead
Dopod.....P800W.....WM5.........Work QuickDial.exe Dead
MIO........A501.......WM5......... Work QuickDial.exe Dead
CHT........9100.......WM6..........Work
AT&T......8525.......WM6..........Work
HTC......TYTNII......WM6..........Work
Dell......Axim X51V..WM6..........Work
Site 1
http://blog.yam.com/leo2016/article/12801568
Site 2
http://blog.pixnet.net/leo2016/post/11375616
Can you please post device compatibility list or is this for a specific device only?
Regards,
Carty..
Thanks man I will try it
let me try it. thx
Mirror please!
here is the mirror.
hope it is useful. maybe u can put it in the 1st post to make it easier?
thanks.
http://w14.easy-share.com/11341771.html
I know it's probably covered somewhere, but with so many posts on the Cube and FTouchFlo, I can't find it.... How do I get the gesture system to work on HTCAlbum after installing FTouchFlo? It's in the list of exclusions properly, but the gestures no longer work; even if I disable FTouchFlo and soft-reset my Kaiser.
Sorry guys. Is the attached file corrupted or not complete?
leo2016 said:
20071130 HTC_CUBE_1.0_BY_LEO2016
Fixed Cube Settings "App Launcher tab" can't show any images
Fixed Add FTouchFloConfig_v0.9
Fixed Update to TFloCubeCtrl - v1.1.0
Fixed Add FTouchFloConfig Shortcut to Start Menu
Fixed Duplicate Start FtouchFlo Programs After softrest
Fixed Enable or Disable HTC_CUBE by useing FTouchFloConfig
Readme
1. Copy file to your ppc then install to main memory
2. Start --> Programs --> FTouchFloConfig
3. Selet General tab --> Checked Enable FTouchFLO
4. Done then exit this Programs
5. Softrest Your PPC
Enjoy~~~~~~~
Site 1
http://blog.yam.com/leo2016/article/12801568
Site 2
http://blog.pixnet.net/leo2016/post/11375616
Click to expand...
Click to collapse
Will this work on square screens (240x240)
Works really well, thank you!
I installed this cab and all icons and configuration screens are there, but the gestures don't work.
When I want to start touchflo manually it's says it's already running so I'm sure the gestures don't work.
Any suggestions?
I may have to try this once the results are in....
mauce said:
I installed this cab and all icons and configuration screens are there, but the gestures don't work.
When I want to start touchflo manually it's says it's already running so I'm sure the gestures don't work.
Any suggestions?
Click to expand...
Click to collapse
i think the same thing happen to me.
T3D0nG said:
I installed this cab and all icons and configuration screens are there, but the gestures don't work.
When I want to start touchflo manually it's says it's already running so I'm sure the gestures don't work.
Click to expand...
Click to collapse
Readme
# Please Remove Any VER FtouchFlo、FTouchFloConfig
# Please Install HTC HOME
1. Copy file to your ppc then install to main memory
2. Start --> Programs --> FTouchFloConfig
3. Selet General tab --> Checked Enable FTouchFLO
4. Done then exit this Programs
5. Softrest Your PPC
WM5
Does this work with wm5 standard oem rom devices?
Is it the original Cube?
Is the media player interactive?
Will have efrosts touchflo installed affect it?
Thanks
It works! I followed all of the instructions in the readme file: Removed the touchflo that I already had on the device (For removing previous touchflo versions: I had my old touchflo in the start up menu in windows, and was having trouble getting rid of it since it was already running. So I cut and pasted touchflo to a different folder, soft reset, and was able to delete it so it wasn't running at start up anymore), already had HTC Home on there, installed the cab installer, went into the touchflo config file and enabled touchflo, did a soft reset, and it works perfectly.
...only thing is the "New E-Mail" and "SMS/MMS" tab seems dead, but it still works from HTC Home.
The "contact" side takes a couple of seconds to come up but thats expected. Everything else works like a charm. Easily the best one-stop .cab installer of the Touch Cube that I've tried so far.
Thanks for the post.
...sorry....I forgot:
It works fine on my AT&T 8525, WM6 offical AT&T Rom. Thanks again!
If you had FtouchFlo installed previously, make sure you delete the exe file from /Windows/Startup and leave the one from the cab installation. My cube worked after that.
ADD Device Compatibility
Works great here. I'm using a Blue Angel running xplode's latest WM6 ROM.
Thanks for the great work!

comm manger problem

i'm not sure what happened, comm manager is gone, when i lauch comm manager from program menu, i only see a transparent 'phone' in the background, and then what page freeze and nothing happens.
I tried to install a new 6 button colored comm manager, 10 button comm manager, it says 'install was unsuccessful, the program or setting cannot be installed because it does not have sufficient system permission.'
i'm not sure is wrong, can anybody help?
Yes you ****ed it up. you partially overwrote the original 6 tab comm manager with the incompatible 10 buttons comm manager. You screwed it up.
Try to identify all the files which belong to the comm manager and delete them out of the windows directory (a couple graphics files and an exe). This way you'll get the default one back which is undeletable in the ROM. Then, after that, install Schaps advanced config tool and use it to set your polaris to use the 6 tabbed comm manager. If this is too much and you dont feel like doing all that, hardreset your device.
In case you want to go the hardreset way and if you intend to do a complete system backup and put it back onto the device, the problem will be backed up as well and put back on the system with the restore. Only back up your personal databases and text messages and then hardreset. I recommend PIMBackup 2.8 for that task.
schaggo said:
Yes you ****ed it up. you partially overwrote the original 6 tab comm manager with the incompatible 10 buttons comm manager. You screwed it up.
Try to identify all the files which belong to the comm manager and delete them out of the windows directory (a couple graphics files and an exe). This way you'll get the default one back which is undeletable in the ROM. Then, after that, install Schaps advanced config tool and use it to set your polaris to use the 6 tabbed comm manager. If this is too much and you dont feel like doing all that, hardreset your device.
In case you want to go the hardreset way and if you intend to do a complete system backup and put it back onto the device, the problem will be backed up as well and put back on the system with the restore. Only back up your personal databases and text messages and then hardreset. I recommend PIMBackup 2.8 for that task.
Click to expand...
Click to collapse
Is this the Comm Manager?
http://forum.xda-developers.com/showpost.php?p=1400090&postcount=838
If I look the name I guess is only for Kaiser, maybe I'm wrong
which file control comm manager? and which function in Schaps advanced config tool control the tabs?
i'm using bepe wm6.1, the comm manager can hold 6 tab by default. I just tried 6 tab colored and 10 tab like the one mormy described in the post, they actually worked before it disappeared.
In Schaps tool it's under the menu softkey.
Use a file manager which can hide files which reside in the ROM (resco for example). Then have a look at the graphic files which reside in the windows directory and look like they belong to the comm manager. That way you'll figure out which files to delete. But honestly I think you'll end up doing a hardreset anyway because you most likely wont get it to work anymore. Registry is screwed up, files and filenames dont match anymore, the mess is probably too big to fix.

stupid question.. :) (file location??)

Hi.. i instaled some programs and i cant find them (location), so i can not use it??
for example, some programs i installed succesufull, and i have them in "start" menu..
but, some i install, i have them on uninstall list, but cant find them? (when installing i chose "storage" not sd card.. tryer way around, but nothibng..
maybe i am missing something again.. till answer, must say Nokia : HTC 2:0...
Program files ?
mobrado said:
Hi.. i instaled some programs and i cant find them (location), so i can not use it??
for example, some programs i installed succesufull, and i have them in "start" menu..
but, some i install, i have them on uninstall list, but cant find them? (when installing i chose "storage" not sd card.. tryer way around, but nothibng..
maybe i am missing something again.. till answer, must say Nokia : HTC 2:0...
Click to expand...
Click to collapse
Try
\Program Files\[<Your program's Developer>\]<Your Program Name>
(Start-> File Explorer -> Up (lower left corner)->Up->Up->Up->. . . .->Up->Program Files . . .)
Also if you still cant find it, hook it up to your pc, and then use the windows (if you have windows) built in search, and then search for the file name and then you'll know where it is in the future
sorry people, i was not precise..
so i have installed Fring for example, and i go to start and there i see fring icon and start it..
but i have installed some power manager, and other programs, and I CAN NOT FIND icons to start it???
....
mobrado said:
sorry people, i was not precise..
so i have installed Fring for example, and i go to start and there i see fring icon and start it..
but i have installed some power manager, and other programs, and I CAN NOT FIND icons to start it???
....
Click to expand...
Click to collapse
Some of the shortcuts in the start menu are actually folders (Multimedia, for example.)
Have you looked in them for the apps you installed? Also, some apps don't have shortcuts in the programs folder. TouchResponse, for example, just runs all the time. There's a shortcut in settings, but nothing in the start menu root.
You probably just need to hunt round. If you could tell us for sure what you're missing then someone on here will definitely have installed it previously and be able to help you.
ok, sorry...
i have installed program Called power monitor. it monitors power consuption of each task/progrm running.
searcb for it on thiz forum, and try to insta.
lof course, I have well known battery life problem... and finding my way to get max from my hd 2.
priciate all tips & answers.

Dutty's Task Manager installs but won't run

Is anybody else having trouble with Dutty's Task Manager on the new 1.66 ROM? I'm able to install it but it doesn't run and I can't see an icon in the system tray. If that won't work, can anyone recommend an alternative that will allow me to close apps when I click on the X button?
Isn't this a problem for anyone?
Not working for me too.
jakem said:
Is anybody else having trouble with Dutty's Task Manager on the new 1.66 ROM? I'm able to install it but it doesn't run and I can't see an icon in the system tray. If that won't work, can anyone recommend an alternative that will allow me to close apps when I click on the X button?
Click to expand...
Click to collapse
ok... what you have to do is disable the HTC SENSE before installing the cab... In the Setting Tab...tap Menu bar and choose All Settings --> Today--> tick the box Window Default-->ok... then you install the Task Manager.... soft reset... and enable the HTC SENSE again.. and you will see
Try touch x task manager its working fine on mine
harry_dinh said:
ok... what you have to do is disable the HTC SENSE before installing the cab... In the Setting Tab...tap Menu bar and choose All Settings --> Today--> tick the box Window Default-->ok... then you install the Task Manager.... soft reset... and enable the HTC SENSE again.. and you will see
Click to expand...
Click to collapse
Thanks Harry, that worked a treat. Funny that I never had to do that with previous ROMs but I'm happy to have it working again
I might give touch x task manager a try when I get home tonight. Thanks for the suggestion lordof_theq.
still not installing for me.
I tried everything above, including both task managers, a hard reset re-flashing the ROM. Nothing works
One time it worked but then i reset the device and it went again.
Mine runs but now I have two icons. And when I start the new install it won't load the programs. The window does not fill up.

Categories

Resources