hey there. i have another question unfortunately . ive installed FtouchFlo 1.4.1 and then i installed SCLPF 1-62. of course i also installed adobe flash lite player v.2.1.7.2.14.99 before all that. i got everything to work, the only question i still have is how i can assign a few things like comm manager to the icon in sclpf. i did everything according to instructions where it was mentioned that you have to simply copy the program u wanted into Windows ==> Start Menu ==> Programs and then you are able to choose it in the cube settings. but with things like the comm manager it didnt work and also, can u actually assign a folder to an icon?
Penzi said:
hey there. i have another question unfortunately . ive installed FtouchFlo 1.4.1 and then i installed SCLPF 1-62. of course i also installed adobe flash lite player v.2.1.7.2.14.99 before all that. i got everything to work, the only question i still have is how i can assign a few things like comm manager to the icon in sclpf. i did everything according to instructions where it was mentioned that you have to simply copy the program u wanted into Windows ==> Start Menu ==> Programs and then you are able to choose it in the cube settings. but with things like the comm manager it didnt work and also, can u actually assign a folder to an icon?
Click to expand...
Click to collapse
same problem overhere... can not assign comm manager because it s not in the list of programmes which can be choosen...
Hi,
i need help where can find the the Task-Manager, i had installed QuickMenu
but i don't need this, after Deinstalling and Reset my Task-Manager never appears.
rookie333 said:
Hi,
i need help where can find the the Task-Manager, i had installed QuickMenu
but i don't need this, after Deinstalling and Reset my Task-Manager never appears.
Click to expand...
Click to collapse
I am not quite sure whether I can give the solution, but I would go to
settings - systems - and than there must be a configuration for the Task Manager. I have a german system and here it is "Aufgaben Manager", but I do not know the english name.
I think the original Task Mananger is just switched off and you just have to switch it on again.
dingolino
Thanks,
but i'd just reset my phone, but you are right
i'm looking for the Aufgaben-Manager (Task-Manager) under "Taste" (Key) i have to set "Kurzmenu in Heute-Fenster aktivieren" (Activate Short-Menu in Today-Screen)
herewith i'm able to activate or deactivate the task-man
here are some users which have the same prob after installing and deinstalling SPB panels and they can't find a solution.
Before i reset my phone I had spoken with the xperia hotline and they also cant't fix it
I have made a CAB with the new Topaz comm manager and its applets.
http://rapidshare.com/files/219499651/Topaz_Comm_Manager.cab
Sometimes in the first install it requires to turn Wifi on and off from setting to get it grayed out.
can you made a version for QVGA thanks mod
I get a message that I lack sufficient permission. Any ideas? I've never gotten that before. Does this require a 21000 ROM?
Update: You were right - SDKCerts must be installed first. Thanks again. Posted it here as well http://www.fuzemobility.com/touch-pro-2-communications-manager-ported/
bugsykoosh said:
I get a message that I lack sufficient permission. Any ideas? I've never gotten that before. Does this require a 21000 ROM?
Click to expand...
Click to collapse
+1 to this error. About halfway through the install (bars are at about 50%)
it gives me the ''does not have sufficient system permissions'' error.
Running a CDMA 21042 Diamond ROM.
Can this file be posted elsewhere? TQ
I can mirror if i can get a copy on 4shared site.
TQ
bugsykoosh said:
I get a message that I lack sufficient permission. Any ideas? I've never gotten that before. Does this require a 21000 ROM?
Click to expand...
Click to collapse
NO it worked on 20000, in fact i am using it. Have you installed sdkcerts?
Greeat job wow its bad ass good find an thanx for this cab!!! little goodies are always fun lol
Please
Someone please port for QVGA.
Paul
Does it work on WVGA (Touch HD Blackstone with stock English ROM build 20757)?
nwradu said:
Does it work on WVGA (Touch HD Blackstone with stock English ROM build 20757)?
Click to expand...
Click to collapse
I second that ! I got a french cooked rom, a great rom, but I miss really the new comm manager.
Works on WVGA!
I'm using it on my german Xperia X1
Chris
this one works. the problem is the dlls arent signed.
http://forum.ppcgeeks.com/showthread.php?t=64195
I am running NATF 4.5's, it installs but i can't get the advanced settings for wifi or phone, only the advanced options for bluetooth works. Tapping the center, or the far left side doesn't do anything for me on those two options.
It works well, thank you.
Well, I have the sdkcerts.cab installed (I had to for XboxMod's Rhodium), but I still get the error during installation that have insufficient permissions.
I tried installing sdkcerts again, but it quickly returns stating it was successfully installed on my device. The new Comm Mgr cab still refuses to install.
I am running with the AT&T leaked test ROM if that makes a difference.
ap4lifetn said:
I am running NATF 4.5's, it installs but i can't get the advanced settings for wifi or phone, only the advanced options for bluetooth works. Tapping the center, or the far left side doesn't do anything for me on those two options.
Click to expand...
Click to collapse
Same happens to me on my NATF 4.3's.
imreolajos said:
Well, I have the sdkcerts.cab installed (I had to for XboxMod's Rhodium), but I still get the error during installation that have insufficient permissions.
I tried installing sdkcerts again, but it quickly returns stating it was successfully installed on my device. The new Comm Mgr cab still refuses to install.
I am running with the AT&T leaked test ROM if that makes a difference.
Click to expand...
Click to collapse
OK, it it is not a cooked ROM you have to run the patch that allows to run unsigned software.
What patch?
caldito said:
OK, it it is not a cooked ROM you have to run the patch that allows to run unsigned software.
Click to expand...
Click to collapse
if i install this, will it be in english, or will it be in the language of my rom and manila? my phone is in russian, will this new comm manager have the proper mui files??
thanks
Secondary pages not showing
I installed the package on my stock rom AT&T Fuze. The main function works great. I was even able to use the Advanced Configuration utility to add the selectable 3G item. However, the only secondary page that works for me is the Blutooth page. All others just light up the item for a moment then shut it off---no secondary page displayed. Has anyone else had this issue?
I have an HTC Touch Pro 2 with WM 6.1 TF23d 3.0 I believe...I tried to install a theme http://forum.xda-developers.com/showthread.php?t=476170 and...the tabs are gone it says title on the home screen...and the Dialer is not aligned right and not changing the "Talk" button...Also the Start menu is not working either...I've tried just installing the slider and it didnt help...If i turn off touchflo i can use the today screen fine....if i try to uninstall the theme it says the program wasn't uninstalled fully....any help or advice is appreciated.
gramagy said:
I have an HTC Touch Pro 2 with WM 6.1 TF23d 3.0 I believe...I tried to install a theme http://forum.xda-developers.com/showthread.php?t=476170 and...the tabs are gone it says title on the home screen...and the Dialer is not aligned right and not changing the "Talk" button...Also the Start menu is not working either...I've tried just installing the slider and it didnt help...If i turn off touchflo i can use the today screen fine....if i try to uninstall the theme it says the program wasn't uninstalled fully....any help or advice is appreciated.
Click to expand...
Click to collapse
Hard reset will fix it
finally gave in and did the hard reset...thought I would check to see if it were fixable otherwise..Thanks
Always look to see if things are compatible! There are many different Manila mods out there, and they have to be compatible with your ROM Manila.
I have a very strange symptom on my device. When I go to the start menu and try to scroll in the window it didn't refresh the screen, the icons are overlapping each other. This happening if I am go to a subcategory in the start menu as well. See attached screen shots. Right now it seems every other apps are working fine.
Issue caused by WMedia Support by Helmi's. I uninstalled but it did not helped at all
Any idea, how can I resolve this issue?
What I have done till now:
I have checked the install cab file - it seems all dlls were removed from the device (2 or 3 remained but the date of the files are the same when I coocked the ROM)
I have checked all files were created/modified on the day when install the codec, but I did not found anything.
I have tried install some start menu converter such like start menu grid, but they did not helped at all to solving this issue
ROM: Dutty WM6.5 LEO R4 WWE
Any help/idea would be appreciate.
I think you will need to Hard Reset your device as you mentioned that some critical system files may be missing. I don't think anything else can be done.
Change the tsk theme to classic blue then soft reset, then change it back.
dwizzy130
Ahh... never thought of that, good call
Hope that fix works.
dwizzy130 said:
Change the tsk theme to classic blue then soft reset, then change it back.
dwizzy130
Click to expand...
Click to collapse
Thanks for the hint, but unfortunately it did not help, any other idea apart from hard reset?
If no one else has reported the same bug in the chef's thread then flash a stock rom, then flash the Dutty rom again. Then hard reset twice. Then find an update to that program you installed that caused it in the first place.
I don't think it is related to the rom is much more the app I installed. If there won't be any other idea i will do a hard reset and check (might be update rom as well)
I also try to check registry changes what I found in the cab, but nothing special, at least for me