Database Users

Bluetooth cuts out after a few minute

Hi All,
I have MDA compact unlocked. When i answer a call with my Motorola HS810, it works fine but only for a couple of minute. It then loses connection and I have to actually use the phone. Has any experienced this and is this a fix ffor it?
Thanks for your Help.

Yeah this is a confirmed issue that they are working to resolve. I'm going to post a response e-mail i got back from the O2 helpdesk.
They will make a ROM update available sometime....not ETA at present.

I guess this profile should help
it will basiclly let ur PDA receive bluetooth messages.. even when ur display is turned off... and the same thing for the bluetooth headset...
I hope it will work
cheers

Can anyone confirm whether this solves the problem?

Hi,
I have the iMate Jam and a Motorola HS850. I can pair up ok but the connection drops out when I make a call or receive a call simply move the earpiece away from my Jam.
It is as if my Bluetooth signal is pathetically low! :evil:
I hope they fix it soon as I am less than impressed as I can't take the Motorola back because there is nothing wrong with it.
theborg

duke911 said:
I guess this profile should help
it will basiclly let ur PDA receive bluetooth messages.. even when ur display is turned off... and the same thing for the bluetooth headset...
I hope it will work
cheers
Click to expand...
Click to collapse
Is this still working?
I have a Touch Pro and a Saab boardcomputer. After pairing these two, the connection disconnects after a few minutes (when I do not have a call).
By the way: when I have a call every five minutes (so both are active connected) the connection still active.

Bluetooth disconnecting during call

Wondering if anyone has had this problem. I haven't pinned a time down yet. I use a motorola car kit. It will disconnect and end the call for no reason. Is there a timer to auto disconnect in the bluetooth stack? Any help is appreciated.

approx 4minutes or less
I was having a problem w/mda and bluetooth and sometimes without bluetooth, in that the entire network would just drop when the call gets close to 4 minutes.... I called tmo about it and they simply gave up and said maybe its the phone...so they sent me a replacement mda, used it today during one call and couldn't believe that the call lasted longer than an hour...

Mine is only with bluetooth. I guess a little more info is needed. If I hit the voice dial button on my car kit I get the voice command tone. I have also used bluetooth to play music over the car kit with the voice command controls(just for fun, horrible quality). It will disconnect while it's playing music no call involved. I have a feeling it's the bluetooth connection timing out but I'm not sure. It's frustrating.

so its not happening during phone calls???
see there might be a bluetooth timeout that tmo doesn't know about...I have to use bluetooth and it seems like every 4min or less it blanks out everything and sometimes I even have to re pair the two devices.... I would try making calls and using the bluetooth w/o car kit...mine did some of the samethings like streaming music thru bt headseat and it would blankout with that also even when not on a call..

Car Kit Not Staying Paired???
I guess I wasn't clear. It happens in both situations. I think i have to re-pair after as well. As far as I know it doesn't stay paired. When a call comes in I usually have to wait about 2 rings before it rings through the car kit. Also when I make a call by hitting the voice dial button on the car kit the blue light blinks for about 2 seconds then I get the voice command sound. I assume that the blinking is it re-pairing. I guess I need info on how to keep it paired.

Anyone? I have found that time dosen't seem to be a issue as it has done it a 1min 43 seconds and 2 mins 38 seconds.

GreggSymington said:
Wondering if anyone has had this problem. I haven't pinned a time down yet. I use a motorola car kit. It will disconnect and end the call for no reason. Is there a timer to auto disconnect in the bluetooth stack? Any help is appreciated.
Click to expand...
Click to collapse
Try turning on the bluetooth first while your phone is off. Once the bluetooth is on, then turn on your cell phone. I tried many times in frustration why it is saying "phone is disconnected" looking for problems. Then it works now and even the phone book in my Nokia and Garmin GPS. Hope it helps you too.

Turn on bluetooth device first while the cell phone is off. Once bluetooth is on, then turn on the latter. Hope it works. Do it everytime you use bluetooth device in your car.

Xperia X1 with DS-980 Headset !! Massive BT Problems !!

Hi,
When I bought the phone in November it had serious problems with bluetooth, it was turning on off and disconnected the headset during or especially after phone calls.
That is absolutley not ok and I am using SE's top of their line headset: DS-980
These massive problems with BT exist also after firmware upgrade to R2A - The phone handling seems smoother than before, there are little improvements like a battery symbol on the top bar, another BT symbol, but it seems that some bluetooth problems still exist.
Just minutes ago, the phone disconnected from GSM/GPRS/UMTS line and connected again while I was using headset and was listening to music through WM player - then the phone suddenly restarted !!
I think that this is not the problem with the compatibility of this headset only, I did not try others but I think it will make same troubles with them too.
BT BUG in detail:
* Connect / Disconnect Phone when using headset intensive
* Headset (DS-980) especially disconnects after phone calls
* BT icon dissapears sometimes -> then it has to be switched off and on again to work "properly"...
SO MY QUESTION: CAN SOMEONE CONFIRM THESE BUGS/PROBLEMS ?? Is it the headset or a bug in phone (hardware or firmware ?? )
Thanks,
Freako

I have almost the same problem with my Volvo XC70's built-in hands-free - phone randomly disconnects from car in standby mode as well as during phone calls. I found some solution but haven't tried it yet - there is a program which stays in memory and checking BT status - if it's OFF the program restarts it.

i´ve the BT Headset Ds980 too but not such problems...
but beforce the update i had problems with calls...i couldn´t answer them with the headset...if i accepted them with the headset, i had to use the phone... the device did not stream the voice to the headset but now every thing runs "perfect"^^

bt headset problems

I have a jade working with a BT110 it answers the call fine but after the call the headset apears to turn off which it is supposed to do but the phone thinks that it is still connected so you have to turn soft reset the phone before you can make/recive a call and hear it via the handset.
has anyone else had this problem or could it possibly be the headset rather than the phone?
Tom

paperclip69 said:
I have a jade working with a BT110 it answers the call fine but after the call the headset apears to turn off which it is supposed to do but the phone thinks that it is still connected so you have to turn soft reset the phone before you can make/recive a call and hear it via the handset. has anyone else had this problem or could it possibly be the headset rather than the phone?
Tom
Click to expand...
Click to collapse
My experience - I use Jabra BT. The BT does not switch off after call is disconnected, until you switch it off. And the phone always thinks that BT is on (even when the BT set is switched off) until BT is disabled using the comm function.

I tried another Jabra headset last night, and although slightly better behaved it still didn't release the phone when turned off?
does anyone use a BT headset with the jade that works properly? what are peoples experiances.
anyone know what it is about the jade that makes it not work right?

Bluetooth connection time

Hi,
i have phonealarm. Phonealarm can turn on bluetooth on incoming call. this save battery.
my td2 take about 30 seconds to connect to my seecode car handsfree.
my old touch cruise connected in 5-10 seconds.
30 seconds is to slow for the incoming call.
is there any way to speed up the bluetooth connect?
regards
lars

is there any way to speed up the bluetooth connect?
Click to expand...
Click to collapse
Can't answer that, but can report that leaving Bluetooth enabled all the time doesn't have a serious impact on battery life. I use Bluetooth for music, and when I turn on my Sony HBH DS-200 it connects immediately even with the TD2 in standby. Try it, nothing to lose.